teecis Posted January 31, 2020 Share Posted January 31, 2020 I used hackintosh install of catalina on Aorus Z390 pro for about 6 months (it was beta), I don't know why it did not let me upgrade to non-beta 15.3, somewhere I found EFI folder for Z390 pro, started using it and it was ok, but the longer it ran the worse it got. I had gotten used to ram beeing at 85-90% (what the hell is pressure?), apps becoming unresponsive (opening with blank windows, not able to use them) when only thing helping was reboot. And reboot was quite slow. When I had enough, started to google for help. Just wanted to say that this is awesome description, bios update and osx catalina install went without a single hitch. all is working, sleep is no problem, everything is a lot faster now and ram (with parallels windows instance open in background) is about 50%. Happy camper here! Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2706538 Share on other sites More sharing options...
Project 2501 Posted February 26, 2020 Share Posted February 26, 2020 On 10/19/2019 at 11:12 PM, glasgood said: Hi, Use AudioGod’s updated EFI folder for your hack, link below https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/ Hi, I have the same problem with the back panel usb 3 ports not being backward compatible with usb 2 devices; the front panel USB 3 ports work with USB 2 devices. However, AudioGod's EFI is specific to bios version of the PRO board. I have the PRO WIFI version, so I am not sure if his EFI would work. Is there a way to make the back panel USB3 ports backward compatible needing to have a specific bios and motherboard? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2710054 Share on other sites More sharing options...
AudioGod Posted February 26, 2020 Share Posted February 26, 2020 12 minutes ago, Project 2501 said: Hi, I have the same problem with the back panel usb 3 ports not being backward compatible with usb 2 devices; the front panel USB 3 ports work with USB 2 devices. However, AudioGod's EFI is specific to bios version of the PRO board. I have the PRO WIFI version, so I am not sure if his EFI would work. Is there a way to make the back panel USB3 ports backward compatible needing to have a specific bios and motherboard? It will work no problem just make sure your using the latest bios for the pro WiFi and your be golden. you also can’t use my bios profile but you can just do the settings manually yourself Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2710057 Share on other sites More sharing options...
pkdesign Posted February 26, 2020 Share Posted February 26, 2020 (edited) I have the Pro Wifi version of the this board as well and it work brilliantly with @AudioGod EFI. I haven't had any issues with any USB ports. I am on the latest 12c BIOS. Here are my BIOS settings: Edited February 26, 2020 by pkdesign Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2710061 Share on other sites More sharing options...
Project 2501 Posted February 27, 2020 Share Posted February 27, 2020 7 hours ago, AudioGod said: It will work no problem just make sure your using the latest bios for the pro WiFi and your be golden. you also can’t use my bios profile but you can just do the settings manually yourself Thanks for your (and pkdesign) quick reply. I'm lucky I found that specific post in this thread... 62 pages is a lot to comb through; the terms I used in global search didn't return relevant hits. I'll give it a try ASAP. It might take a while to report back, since I am doing this in bits and pieces in my spare time. My current Hackintosh is working fine, so I am in no hurry. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2710096 Share on other sites More sharing options...
joaog Posted March 9, 2020 Share Posted March 9, 2020 Pos-install for Intel UHD630 is missing. Can I use my pen drive EFI instead? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2711747 Share on other sites More sharing options...
pcm70 Posted March 18, 2020 Share Posted March 18, 2020 On 7/2/2019 at 7:16 PM, AntoineWill said: Hello, First of all thanks a lot for this big tutorial ! however, I got a "big" issue. Everything was fine, I was at the end (on macOS, etc) and I have installed the wifi card. The wifi card work, I was able to use my magic keyboard & mouse. I start to follow the steps to be able to use iMessage. After updated the list with Clover Configurator I rebooted my hackintosh and now it's stuck everytime at : "apfs_module_start:1393: load: com.apple.filesystems.apfs, v945.260.7, apfs-945.260.7, 2019/04/26 I saw online that the bios for the motherboard should be an issue. But I tried with the F7, F8 and F9 ! Nothing works... I setup and setup again de bios as mentioned in the topic just to be sure. I also try to reset the list to the one that work just before (I made a copy). Still the same. I confirm that I can boot for my original boot drive with the clover install and go to my macOS session. But I can't boot from my main drive now... Please, if any help, it would be awesome Did you ever make any progress on this? I have been stuck as well. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2712760 Share on other sites More sharing options...
RetrΩméga Posted March 21, 2020 Share Posted March 21, 2020 Hi Glasgood, i have try since 3 days to make my install but no success.... my conf is : AOrus z390 Pro Wifi 2 x 16go Corsair ram 2 Toshiba mvme COre i9 9900 I have an old nvidia card that i can use but she is dead so i can not use it and i think normaly it's not possible using nvidia The problem is : i want to use the onboard graphic card (intel) but if i put IGFX instead of PCI slot it never work. I have a round sign with a bar and don't understand why. i have try many things but still not work without the nvidia card. it work with nvidia card however but i don't care because this card doesn't work properly after a long time in humidity, she is dead Can you help please ? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2713156 Share on other sites More sharing options...
sarkdavidson Posted March 21, 2020 Share Posted March 21, 2020 Does anyone manage to get full GPU acceleration for exporting Brucex 5k on 10.15.2? (headless ig-platform-id + RX580) Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2713175 Share on other sites More sharing options...
lygi Posted March 25, 2020 Share Posted March 25, 2020 (edited) a question to the OP, is there a chance to upload a working EFI for 10.15.4 ? Update crashes just after +++++++++++++++++++++++++++++++++++++++++_ it freezes there. TIA Edited March 25, 2020 by lygi add picture Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2713714 Share on other sites More sharing options...
pkdesign Posted March 25, 2020 Share Posted March 25, 2020 I think you have to update to Clover 5107 to get it to work. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2713777 Share on other sites More sharing options...
lygi Posted April 6, 2020 Share Posted April 6, 2020 On 3/25/2020 at 8:57 PM, pkdesign said: I think you have to update to Clover 5107 to get it to work. Correct - sorted now. Thx Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2715747 Share on other sites More sharing options...
pkdesign Posted April 6, 2020 Share Posted April 6, 2020 42 minutes ago, lygi said: Correct - sorted now. Thx I hope you updated to 5018 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2715756 Share on other sites More sharing options...
nikhil96widhani Posted April 7, 2020 Share Posted April 7, 2020 Hi i am facing instant wake from sleep issue after i installed Fenvi T919 wifi bluetooth card. is there any solution to fix this issue? There was no issue before installing this card. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2716047 Share on other sites More sharing options...
OGlikeNES Posted April 24, 2020 Share Posted April 24, 2020 I'm struggling with getting Imessage to work. I have the same motherboard paired with i3 9100f and RX 580. I followed the guide. Sometimes Imessage will work but for like 10 seconds then I get error code. Any suggestions? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2719119 Share on other sites More sharing options...
JimmyJ_79 Posted April 29, 2020 Share Posted April 29, 2020 Not sure if anyone has mentioned this yet but WIth Bios version 12c for the Aorus Z390 Pro Wifi you can disable wifi from the bios, which means you dont have to disable HS14 from the boot args any more! Tested it, all works great! 1 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2719927 Share on other sites More sharing options...
pkdesign Posted April 29, 2020 Share Posted April 29, 2020 If you are using @AudioGod EFI (and you should), HS14 is disabled from within the SSDT. But I turn off WiFi from BIOS for good measure. Be warned though, if you dual boot into Windows it will not work there either if you turn off in BIOS. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2720028 Share on other sites More sharing options...
wdopulencia Posted May 2, 2020 Share Posted May 2, 2020 Hi! I cant view the dual boot windows and macos link. Is it possible to have them up again? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2720528 Share on other sites More sharing options...
pkdesign Posted May 2, 2020 Share Posted May 2, 2020 7 hours ago, wdopulencia said: Hi! I cant view the dual boot windows and macos link. Is it possible to have them up again? READ THE FIRST POST Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2720594 Share on other sites More sharing options...
multiymedia Posted May 30, 2020 Share Posted May 30, 2020 (edited) Thank you so much for your work. i follow your guide to make a similar mack. seems to all be ok but the wifi/bluetooth card no detect the bluetooth. the card is the BCM943602CS2 with a pci adapter and the cable connected to the usb on the mainborad. the wifi work perfect but bluetooth is not detected. where can be the problem?? the only that i change is the smbios for get a new serial and fix the problem with mojave for the .jpg preview. z390 aourus pro i7 9700K RAM 32GB CRUCIAL BALLISTIC 3000MHZ NVME SAMSUNG 970 ATI SAPHIRE PULSE RX580 BCM943602CS2 PCI ADAPTER i plug a bluetooth dongle and work well. ?¿?¿ Edited May 30, 2020 by multiymedia Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2724285 Share on other sites More sharing options...
pkdesign Posted May 30, 2020 Share Posted May 30, 2020 Check my posts about this here and before this post: Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2724333 Share on other sites More sharing options...
thief Posted July 18, 2020 Share Posted July 18, 2020 Hello @glasgood How do you solve the sleep issue with bluetooth under a USB2.0 Hub? I tried to set the Hub as internal but the computer still couldn't sleep. Please check the attached picture for more detail Also my USBMap Kext doesn't work, I'm using Asrock B460M pro4, can you check why my USB3 devices are not recognized? Thanks USBMap.kext.zip Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2730825 Share on other sites More sharing options...
glasgood Posted July 19, 2020 Author Share Posted July 19, 2020 On 7/18/2020 at 11:23 AM, thief said: Hello @glasgood How do you solve the sleep issue with bluetooth under a USB2.0 Hub? I tried to set the Hub as internal but the computer still couldn't sleep. Please check the attached picture for more detail Also my USBMap Kext doesn't work, I'm using Asrock B460M pro4, can you check why my USB3 devices are not recognized? Thanks USBMap.kext.zip Hi, highly recommended to follow @AudioGod ===>guide and switch to using AudioGod's OpenCore EFI folder. Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2730964 Share on other sites More sharing options...
i-am-the-slime Posted August 3, 2020 Share Posted August 3, 2020 What happened to Audiogod's guide? Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2732882 Share on other sites More sharing options...
jimborae Posted August 3, 2020 Share Posted August 3, 2020 14 minutes ago, eSaF said: Unfortunately because of the Corona Pandemic lock down, AG is inundated with a backlog of work so for the time being is taking a break from the thread but meanwhile hopefully other knowledgeable members will help try to answer queries as best as possible. That I can certainly relate to, and boy, he's earned a break. But the actual guide & thread itself seems to have disappeared so I think it'll be a little hard for anyone ask for help. 2 Link to comment https://www.insanelymac.com/forum/topic/337837-glasgoods-macos-mojave-successguide-for-aorus-z390-pro/page/62/#findComment-2732885 Share on other sites More sharing options...
Recommended Posts