[pre-release] macOS Mojave

[Badruzeus]

On 6/6/2018 at 11:29 AM, Sherlocks said:

all right. HD 3000, now, get black screen after pass verbose screen.

i tested all graphic files of High Sierra in 10.14.

 

My Sandy Bridge laptop issue in 10.14

1. CPUPM

2. HD 3000 Accelerator

 

except list above, all is good.

 

if someone find some solution, it's best. or give up 10.14 in sandy brigde laptop.

i think users of 1st generation laptop have been experienced since long time ago.

hope they find some solution. i will return High Sierra on 4230s.

thanks.

 

I don't think it's same case as 1st Gen Intel HD that need to just enabling QE/CI features, AppleIntelHDGraphicsFB.kext is still found on SLE under hSierra and prev. macOS. But on Mojave as we've talk earlier, AppleIntelSNBFramebuffer* has gone. And even if it's still there, not really sure it'll be loaded bcoz Metal incapable.. or you found a way to force loading 10.13's kext under Mojave?

[Sherlocks]

I don't think it's same case as 1st Gen Intel HD that need to just enabling QE/CI features, AppleIntelHDGraphicsFB.kext is still found on SLE under hSierra and prev. macOS. But on Mojave as we've talk earlier, AppleIntelSNBFramebuffer* has gone. And even if it's still there, not really sure it'll be loaded bcoz Metal incapable.. or you found a way to force loading 10.13's kext under Mojave?

you are right. i knew this true. i just want to install mojave on 4230s. nobody give up mojave installation on old laptop. because of reason, i tested it
then https://www.insanelymac.com/forum/index.php?/topic/334308-[pre-release]-macOS-Mojave#entry2617264

i got it. remains accelerator of hd 3000. i'm waiting solution to resolve this issue. i'm searching this history in macrumors forums. maybe they will try to fix this issue. sorry for my bad english. thanks

나의 LG-F800S 의 Tapatalk에서 보냄

[cavallo]

The Problems are HD3000graphics and CapriFB kexts. All others are loaded. Mine is not 3000 one is a 2000 with 106 ID. I have minor issues but all important works as all pervious versions the differences only noisy thing is flickering on boot and launchpad not fluid.

Very important I don't use any DSDT or SSDT and all kexts are on S/L/E. I use a manual customized config.

Edited June 8, 2018 by cavallo

[Morpheus NS]

What is Mojave file size after downloading? Mine has 5.71GB, but everyone mentions around 5GB... I cannot install Mojave no matter what I do, now I am wondering if the file size is correct.

 

I downloaded from the App Store using beta access utility. How can it be different? 

 

Edited June 8, 2018 by Morpheus NS

[quanie]

11 minutes ago, Morpheus NS said:

What is Mojave file size after downloading? Mine has 5.71GB, but everyone mentions around 5GB... I cannot install Mojave no matter what I do, now I am wondering if the file size is correct.

 

I downloaded from the App Store using beta access utility. How can it be different? 

 

 

Mine is the same. Installed just fine. 

[Badruzeus]

5 hours ago, Sherlocks said:

you are right. i knew this true. i just want to install mojave on 4230s. nobody give up mojave installation on old laptop. because of reason, i tested it
then https://www.insanelymac.com/forum/index.php?/topic/334308-[pre-release]-macOS-Mojave#entry2617264

i got it. remains accelerator of hd 3000. i'm waiting solution to resolve this issue. i'm searching this history in macrumors forums. maybe they will try to fix this issue. sorry for my bad english. thanks

나의 LG-F800S 의 Tapatalk에서 보냄
 

Good news is my GT 520M (Fermi GF119) works OOTB under macOS 10.14 Beta with native NVDA driver, with fully QE/CI enabled I think I'm just lucky with my 2nd Gen CPU that doesn't use IntelHD3000. 

[arsradu]

3 hours ago, Morpheus NS said:

What is Mojave file size after downloading? Mine has 5.71GB, but everyone mentions around 5GB... I cannot install Mojave no matter what I do, now I am wondering if the file size is correct.

 

I downloaded from the App Store using beta access utility. How can it be different? 

 

 

[wern apfel]

21 hours ago, abdouoi said:

I was using the layout 1 but it no longer works even with the new AppleALC 1.2.8

Normally I do not use AppleALC, but I've compiled the latest revision and it works with layout-id 1. Have you tried it without any DSDT changes?. AppleALC 1.2.8 should set the layout-id to 7, if not, add the following code to the HDEF device in your DSDT.

 

                    "alc-layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00         // existing layout-id from AppleALC resources folder        
                    },
                    
                    "apple-layout-id",                       // existing layout-id at AppleHDA resources folder, default is 7
                    Buffer (0x04)
                    {
                         0x02, 0x00, 0x00, 0x00                         
                    },

[Pavo]

Just a heads up, do not update Clover to 4522, it can not boot Mojave.

[arsradu]

10 minutes ago, Pavo said:

Just a heads up, do not update Clover to 4522, it can not boot Mojave.

 

Uhm...it boots Mojave just fine on my side...

Maybe some of those drivers actually do matter?

 

Edited June 8, 2018 by arsradu

[artur_pt]

hello 

 

I'm using it right now .. no problems

 

 

good hack

[Pavo]

Well guess it was just a glitch, now its booting. Even with only apfs.efi, AptioMemoryFix.efi and HFS+.efi

[Badruzeus]

I also use r4522 with pre-post install and so far, got no issue with my sandy cpu and nvidia gpu. Thanks.

2 hours ago, arsradu said:

 

Same here, @ 5.7GB in size

[arsradu]

20 minutes ago, Pavo said:

Well guess it was just a glitch, now its booting. Even with only apfs.efi, AptioMemoryFix.efi and HFS+.efi

 

Yeah, might have been something else... By the way...did anyone try the Messages app yet? Do you see the phone number instead of the name of the person messaging you in the notification pop-up (assuming you've got messages forwarded from your iPhone tot the Mac)? It's fine within the Messaging app itself.I It's just the notification pop-up when receiving a text message that displays the phone number instead of the name. 

Weird thing is...I don't have this issue on my Mac, with the same contacts and everything. But it is on my Hack. :)) Kinda weird, I gotta say.

Edited June 8, 2018 by arsradu

[Carpentryplus25]

1 hour ago, arsradu said:

 

Yeah, might have been something else... By the way...did anyone try the Messages app yet? Do you see the phone number instead of the name of the person messaging you in the notification pop-up (assuming you've got messages forwarded from your iPhone tot the Mac)? It's fine within the Messaging app itself.I It's just the notification pop-up when receiving a text message that displays the phone number instead of the name. 

Weird thing is...I don't have this issue on my Mac, with the same contacts and everything. But it is on my Hack. :)) Kinda weird, I gotta say.

Yeah I noticed it to on mine

[arsradu]

Yeah, also....about the previous issue with Quick Look/Preview....if you upgrade from High Sierra to Mojave, without making a clean install, chances are you're not gonna see this issue. I actually had Mojave installed on another HDD, as an upgrade to High Sierra, and I didn't have this issue. Clean -reinstall, and the issue re-appeared. So...I'm guessing some data was kept from High Sierra. 

Also, I checked using my iGPU and indeed, it does not occur. So it's only eGPUs...and probably only after clean installs.

Edited June 8, 2018 by arsradu

[Sherlocks]

Good news is my GT 520M (Fermi GF119) works OOTB under macOS 10.14 Beta with native NVDA driver, with fully QE/CI enabled I think I'm just lucky with my 2nd Gen CPU that doesn't use IntelHD3000. 

great. it's good news. not sure. anyways seems to not relate metal to get QE.

나의 LG-F800S 의 Tapatalk에서 보냄

[MattsCreative]

2 hours ago, arsradu said:

 

Yeah, might have been something else... By the way...did anyone try the Messages app yet? Do you see the phone number instead of the name of the person messaging you in the notification pop-up (assuming you've got messages forwarded from your iPhone tot the Mac)? It's fine within the Messaging app itself.I It's just the notification pop-up when receiving a text message that displays the phone number instead of the name. 

Weird thing is...I don't have this issue on my Mac, with the same contacts and everything. But it is on my Hack. :)) Kinda weird, I gotta say.

not had these issues or preview issues with a clean install or an upgrade 

[nomadturk]

Anybody try with a old system? like Q8300 + GTX 560 ti? After success install and booting for final step, System immediately restarting on gray screen. 

[ammoune78]

43 minutes ago, nomadturk said:

Anybody try with a old system? like Q8300 + GTX 560 ti? After success install and booting for final step, System immediately restarting on gray screen. 

 

Try first to check config.plist settings, boot-args, graphics settings injection. 

[abdouoi]

7 hours ago, wern apfel said:

Normally I do not use AppleALC, but I've compiled the latest revision and it works with layout-id 1. Have you tried it without any DSDT changes?. AppleALC 1.2.8 should set the layout-id to 7, if not, add the following code to the HDEF device in your DSDT.

 

                    "alc-layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00         // existing layout-id from AppleALC resources folder        
                    },
                    
                    "apple-layout-id",                       // existing layout-id at AppleHDA resources folder, default is 7
                    Buffer (0x04)
                    {
                         0x02, 0x00, 0x00, 0x00                         
                    },

@wern apfel I've modified my DSDT as follow but it still doesn't work. Here are the modifications I've done

 

Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }

                Return (Package (0x08)
                {
                    "alc-layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00                         
                    }, 

                    "apple-layout-id", 
                    Buffer (0x04)
                    {
                         0x02, 0x00, 0x00, 0x00                         
                    }, 

                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }, 

                    "PinConfigurations", 
                    Buffer (Zero) {}
                })
            }

How do I set the layout-id with Clover Configurator ?

Edited June 9, 2018 by abdouoi

[ammoune78]

32 minutes ago, abdouoi said:

@wern apfel I've modified my DSDT as follow but it still doesn't work. Here are the modifications I've done

 

Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
            {
                If (LEqual (Arg2, Zero))
                {
                    Return (Buffer (One)
                    {
                         0x03                                           
                    })
                }

                Return (Package (0x08)
                {
                    "alc-layout-id", 
                    Buffer (0x04)
                    {
                         0x01, 0x00, 0x00, 0x00                         
                    }, 

                    "apple-layout-id", 
                    Buffer (0x04)
                    {
                         0x02, 0x00, 0x00, 0x00                         
                    }, 

                    "hda-gfx", 
                    Buffer (0x0A)
                    {
                        "onboard-1"
                    }, 

                    "PinConfigurations", 
                    Buffer (Zero) {}
                })
            }

How do I set the layout-id with Clover Configurator ?

 

You'll have same result, i suggest to rollback to AppleHDA from 10.13.4 or 5 with AppleALC 1.2.7 and normal use of HDEF=>_DSM, i mean: "layout-id", no more than that, i personally tried it from a user suggestion, and it worked in Mojave just like for Atheros AR9285.

 

If you prefer to try Clover Layout-ID, here's:

 

[Andrey1970]

On 6/5/2018 at 12:30 PM, ammoune78 said:

 

Thanks dude  , got it working, is the CoreCaptureResponder.kext needed also?

CoreCaptureResponder.kext - it is not necessary.

[m1g2]

I confirm that GF119 works, Geforce GT610 works well.

[crazybirdy]

4 hours ago, nomadturk said:

Anybody try with a old system? like Q8300 + GTX 560 ti? After success install and booting for final step, System immediately restarting on gray screen. 

 

Same here,

Core2 Duo E8400 (SSE4.1 only, no SSE4.2) + GT 640 1G, after installation success, boot to system restarting on gray screen and mouse.

GPT + APFS, Clover 4522.

 

Works fine with 10.13.6.

 

I think, it may end of hackintosh(10.14) now.

Edited June 9, 2018 by crazybirdy