Jump to content

119 posts in this topic

Recommended Posts

Hello everyone, I have an Asus gl502vmk (i7 kabylake + GTX 1060 6 gb) laptop and I tried all the patches/kexts to get the brightness with fn keys/touchpad (I2C ELAN 1200 works with VooDoo I2C kext v1.0 but no gestures/preference pane)/Keyboard backlight to work but no success so far, any help would be appreciated, thanks in advance.

[EDIT] (10/04/2018)

Battery status now works, thanks to @RehabMan turned out to be incorrect SMBIOS (used iMac instead of Mbp) lol, but it drains crazy fast (~1.5 - 2 hours while on standby (all apps quited!), on windows 10 it lasts 4 - 5 hours, and on linux it lasts 6 ~ 7 hours!)

And with VoodooI2C v2.0.1 + VoodooI2CHID kext and patched DSDT, the touchpad is now detected in the sys pref pane but still no input.

Sound works with VoodooHDA v2.9.1, but the only issue is that the jack sense isn't working (the output device doesn't auto switch to headphone when connected)

 

[EDIT 2] (11/04/2018)

The system brightness now works thanks to @onejay09 but I have no brightness slider, and there are 4 extra brightness levels (brightness stops increasing after 12 levels)  and the brightness keys are not mapped correctly, plus the brightness decreases when I plug in the ac adapter, then increases if I unplug it???, the brightness level isn't also saved after reboot.

battery still drains crazy fast (~1.5 - 2 hours, even with brightness at 50%, so apparently it is a power management issue).

and I also have shutdowns while in sleep mode (I tried darkwake=10 and darkwake-0 and darkwake=no)

 

P.S. I have uploaded my new report files, thanks!

 

Latest report files (11/04/2018): https://www95.zippyshare.com/v/AMOpP0AY/file.html

Edited by M3G4DR01D

Share this post


Link to post
Share on other sites
Advertisement
13 hours ago, onejay09 said:

will take a look later

Hello @onejay09 and thank you very much for your reply, I have updated my report files please take a look, and If you could help me with the system brightness I would be truly grateful (I saw you manage to get it fully functional on another forum here ;)) thanks!

Share this post


Link to post
Share on other sites
3 minutes ago, onejay09 said:

i cannot imagine your setup ever booted its a mess.

try this let me know how you get on

if applebacklightinjector doesnt work try installing it to s/l/e instead of clover/kexts

 

https://www109.zippyshare.com/v/NNJse9zE/file.html

Testing it now, thank you so much for your time, and about your comment I'm surprised it booted too since it is my first successful -ish hack lol :)

Share this post


Link to post
Share on other sites
6 minutes ago, onejay09 said:

ish... haha

let me know what works

Soo it broke the battery status, and the trackpad is no longer detected, also still no brightness, and I see you changed the SMBIOS to mbp 13,1 is there any reason? thanks!

P.S. uploading new logs.

Edited by M3G4DR01D

Share this post


Link to post
Share on other sites
1 minute ago, onejay09 said:

ok ill redo dsdt post ioreg, and does trackpad work?

 

nope, and now it isn't detected anymore, it appears my touchpad works fine with polling (< v2.0) but not GPIO interrupts.

Share this post


Link to post
Share on other sites

https://www113.zippyshare.com/v/GL3GA8tJ/file.html

IVE RE PATCHED THE DSDT WITH NO VOODOOI2C PATCHES, FIXED BATTERY.

USE THE CLOVER SETUP IVE DONE AS A BASE FOR YOUR SETUP, 

POST AN IOREG AFTER U TRY NEW DSDT PLEASE.

THERES OTHER THINGS IVE FIXED IN THE SETUP, SHOULD BE A GOOD PLACE TO START FROM

https://www113.zippyshare.com/v/GL3GA8tJ/file.html

Edited by onejay09

Share this post


Link to post
Share on other sites

you either have a different backlight injector installed or youve patched applebacklight

have you got vanilla applebacklight.kext and no other kexts regarding backlight?

Share this post


Link to post
Share on other sites
5 minutes ago, onejay09 said:

https://www113.zippyshare.com/v/GL3GA8tJ/file.html

IVE RE PATCHED THE DSDT WITH NO VOODOOI2C PATCHES, FIXED BATTERY.

USE THE CLOVER SETUP IVE DONE AS A BASE FOR YOUR SETUP, 

POST AN IOREG AFTER U TRY NEW DSDT PLEASE.

THERES OTHER THINGS IVE FIXED IN THE SETUP, SHOULD BE A GOOD PLACE TO START FROM

https://www113.zippyshare.com/v/GL3GA8tJ/file.html

Shouldn't inject kexts be YES instead of DETECT because of FakeSMC?

Share this post


Link to post
Share on other sites

 

5 minutes ago, onejay09 said:

is it the injector i gave to you? if not then delete it and install the one in clover.zip

yes I didn't modify anything

Note: I followed this guide to modify the AppleBacklight kext https://www.tonymacx86.com/threads/guide-laptop-backlight-control-using-applebacklightinjector-kext.218222/

And here is a thread that I started with @RehabMan about system brightness, he gave me some tips but unfortunately I haven't understood them, perhaps they might help you, thanks! https://www.tonymacx86.com/threads/system-brightness-not-working-10-13-asus-gl502vmk-laptop.249483/#post-1723397

Edited by M3G4DR01D

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By End3rPower50
      Hi, I want to install MacOS Catalina on my laptop.
      I was installed MacOS Mojave previously but i had a lot of problem, for example my wifi's card (Dell DW1820A) had a problem: My pc sometimes doesn't boot up or pc after some minutes crashed or slowed. 
      Now i want to try again to install macOS.
       
      this is my spec: 
      HP 15-AY034NL 
      CPU: i7 6500U  with HD520
      SSD: 500GB SSD Samsung
      Wifi & Bluetooth: Dell DW1820A (Bluetooth: BCM2045A0) (Wifi: BCM94350ZAE)
      USB 3.0 
      Ethernet: Realtek 8100
       
      Attached in this thread, my old clover configuration created by me (CLOVER OLD) and clover with Wifi driver (CLOVER) created by Hervè (I had asked help at insanelymac's community)
       
      P.S SORRY FOR MY BAD ENGLISH.
      Thanks in advance 
      -ANTONIO
      CLOVER OLD.zip
      CLOVER.zip
    • By simras
      Hello,

      I am trying to make a new Hackintosh under 10.13 with this specs:
      i7 6800K,
      Asus X99-E
      Asus GTX 970

      But the problem is that I can't pass those errors :
      - couldn't allocate runtime area
      - end randomseed ++++++++++++++ _

      I have always passed this thing on all hackintoshs that I have done, but here, impossible.

      Tried those tests :
      - AptioMemoryFix alone,
      - AptioMemoryFix with EmuVariableUefi and RC Scripts,
      - OsxAptioFix2Drv-free2000 with EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2-2016.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFixDrv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, EmuVariableUefi and RC Scripts,
      - Test2.efi with OsxAptioFix2Drv, OsxAptioFixDrv, EmuVariableUefi and RC Scripts.

      I have tried all this with npci=0x3000 that I have never used before instead of npci=0x2000

      I have done an Hackintosh on Asus X99 Deluxe II and it pass with AptioMemoryFix with EmuVariableUefi and RC Scripts....

      I have tried to reset NVRAM with F11.

      I have tried with 1 RAM stick that I have indicate in the SMBIOS :
      https://hackintosher.com/forums/thread/mapping-ram-and-dimm-slots-on-a-hackintosh-with-clover-smbios.365/
       
      I have follow KGP guide for X99 :
       
      The BIOS settings are exactly the same.

      I link my CLOVER folder.

      Thank you.
      CLOVER.zip
×