Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 I don't know exactly, but I've waited. Were you trying to upgrade from the Sierra or doing a clean install? Here, I tried to upgrade first and it took twice as long. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441060 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 I don't know exactly, but I've waited. Were you trying to upgrade from the Sierra or doing a clean install? Here, I tried to upgrade first and it took twice as long.Launched install macos 10.13 from Sierra and installed to another empty partition and after restart booted from that partition. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441063 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 Okay. I think if you try to boot this way, without checking for ATI injection and waiting a little longer on that gray screen, it will go up the installer and start normally. I'm saying this because that's how it happened here, for me. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441066 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Okay. I think if you try to boot this way, without checking for ATI injection and waiting a little longer on that gray screen, it will go up the installer and start normally. I'm saying this because that's how it happened here, for me.It's booted unchecked right now and I'm waiting over 30 mins, let it on that gray screen another 30 mins? Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441067 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 No. 30 minutes is too much ... I don't know so. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441069 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Maybe take much to load because I have 3 hdd and 1 ssd? Ssd and 1 hdd is fusion drive. Between few minutes hdd led is on for few seconds. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441072 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 Apparently the AMD5000Controller.kext has suffered some uncontrolled since the edition for the Sierra. I am not aware of anything about this. I've never used Fusion. But is a possibility. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441075 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Wow, started installing now after about 45 mins but don't have cursor and not appear option to convert to apfs, it's that normal? Hdd led is off and installing bar not increasing, minutes says 22 and don't decrease. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441082 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 It seems that, in your case, the waiting times are quite long. But let it go like this and let's see if everything works ... Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441084 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Started increasing but it's extremely slow, maybe will finish in 4 hours. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441085 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 Here, I waited for about 30 minutes to finish the installation. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441087 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Here, I waited for about 30 minutes to finish the installation.Restarted at 21 minutes remaining Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441090 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 I think you should keep waiting, but apparently, is too slow. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441096 Share on other sites More sharing options...
Cyberdevs Posted June 10, 2017 Share Posted June 10, 2017 Restarted at 21 minutes remaining Sent from my HTC One M9 using Tapatalk during the installation your compute will restart 2 times, first stage is for copying the installation files to your destination drive, second time is to check/update the firmware and the 3rd stage is for installing macOS Sierra. 1 Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441099 Share on other sites More sharing options...
vandroiy2012 Posted June 10, 2017 Share Posted June 10, 2017 IntelGraphicsFixup.kext with support of Kaby Lake Graphics. Fixes PAVP freezes on Intel Azul (HD4400, HD4600), Skylake Graphics (HD530) and Kaby Lake Graphics (HD630) Fixes boot logo on all known Intel Graphics starting with HD4000 Fixes display initialization issues for Skylake an Kaby Lake Will be in trunk later. Author is on vacation IntelGraphicsFixup.kext.zip In macOS High Sierra 10.13 use bootarg -igfxbeta. In macOS Sierra 10.12.5 build 16F2073 works without bootarg Notice: macOS Sierra 10.12.5 build 16F2073 already have NATIVE Kaby Lake support 3 Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441100 Share on other sites More sharing options...
Cyberdevs Posted June 10, 2017 Share Posted June 10, 2017 IntelGraphicsFixup.kext with support of Kaby Lake Graphics. Fixes PAVP freezes on Intel Azul (HD4400, HD4600), Skylake Graphics (HD530) and Kaby Lake Graphics (HD630) Fixes boot logo on all known Intel Graphics starting with HD4000 Fixes display initialization issues for Skylake an Kabylake Will be in trunk later. Author is on vacation IntelGraphicsFixup.kext.zip Great Job! Thanks 1 Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441106 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 during the installation your compute will restart 2 times, first stage is for copying the installation files to your destination drive, second time is to check/update the firmware and the 3rd stage is for installing macOS Sierra.Now continue to boot from same entry in clover and wait another hour? Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441108 Share on other sites More sharing options...
WinstonAce Posted June 10, 2017 Share Posted June 10, 2017 Everything including apfs working fine, only the damn 660gtx which worked flawlessly and natively for ages prevent the system from working Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441109 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 I installed it as chris 1111 taught, booted through .app, went to the usb installer, formatted the target disk, and after the first reboot, proceeded to the installer on the target HDD itself. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441111 Share on other sites More sharing options...
Cyberdevs Posted June 10, 2017 Share Posted June 10, 2017 Now continue to boot from same entry in clover and wait another hour? Sent from my HTC One M9 using Tapatalk To be honest the syndromes you described are not normal at all! The whole process shouldn't take more than 30 minutes form start to finish. Are you using AFPS or HFS? I understand you said you were using a fusion drive right? Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441115 Share on other sites More sharing options...
Wppley2 Posted June 10, 2017 Share Posted June 10, 2017 After the first reboot you need to chose the target HDD to proceed with the install. Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441117 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 To be honest the syndromes you described are not normal at all! The whole process shouldn't take more than 30 minutes form start to finish. Are you using AFPS or HFS? I understand you said you were using a fusion drive right? Yes fusion drive but not trying to install on it, I'm trying to install to an simple hdd with preformatted hfs+ from Sierra. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441118 Share on other sites More sharing options...
Cyberdevs Posted June 10, 2017 Share Posted June 10, 2017 After the first reboot you need to chose the target HDD to proceed with the install. Exactly, The first stage is to boot from USB and making the preparations after the first reboot you need to boot from clover to choose the drive you are trying to install Mac OS to and after that and so on. The guide chris1111 posted was before clover 4084 I guess, with clover 4084 and the right config.plist you can install macOS 10.13 like any other versions of macOS. Except the occasional errors using disk utility to create/format AFPS partitions. Yes fusion drive but not trying to install on it, I'm trying to install to an simple hdd with preformatted hfs+ from Sierra. Sent from my HTC One M9 using Tapatalk Ok, do you have access to your older/working macOS Sierra? Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441129 Share on other sites More sharing options...
Lucy183 Posted June 10, 2017 Share Posted June 10, 2017 Exactly, The first stage is to boot from USB and making the preparations after the first reboot you need to boot from clover to choose the drive you are trying to install Mac OS to and after that and so on. The guide chris1111 posted was before clover 4084 I guess, with clover 4084 and the right config.plist you can install macOS 10.13 like any other versions of macOS. Except the occasional errors using disk utility to create/format AFPS partitions. Ok, do you have access to your older/working macOS Sierra? Yes, didn't touched it. Sent from my HTC One M9 using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441130 Share on other sites More sharing options...
Cyberdevs Posted June 10, 2017 Share Posted June 10, 2017 Yes, didn't touched it. Sent from my HTC One M9 using Tapatalk Good, But before I continue, tell me how did you made the USB disk, and you are using Clover 4084 right? Link to comment https://www.insanelymac.com/forum/topic/324194-pre-release-macos-high-sierra/page/27/#findComment-2441136 Share on other sites More sharing options...
Recommended Posts