[Guide] Catalina / BigSur / Monterey on mobos Serie 100 / 200 / 300 / 400 / 500 / 600 SkyLake / KabyLake / CoffeeLake / CometLake / RocketLake / AlderLake DSDT

[idris iqbal]

battery, brightness work?

send me one ioreg for check PowerManagement, etc

battery and battery status work but percentage of battery stuck at the value of first boot, not increase or decrease

brightness work but not show level when I press brightness button up and down,

sound, mic internal and headphone  work fine

 

this is full debug of my device and ioreg

debug_30285.zip

MacBook-Pro.ioreg.zip

[idris iqbal]

battery and battery status work but percentage of battery stuck at the value of first boot, not increase or decrease

brightness work but not show level when I press brightness button up and down,

sound, mic internal and headphone  work fine

 

this is full debug of my device and ioreg

sorry maldon I think brightness not implement corrected and when I use headset sound not normal and sound of headset normal after I sleep my device

for sound in & out and mic internal, there is no problem, work fine

[MaLd0n]

-brightness

have a patches in RehabMan repository, u can try a Brightness Fix (Haswell/Brodwell), if dont work, check here

BRIGHTNESS.zip

 

-battery

check in repository too if have ur model

 

-audio

u can try other ids and CodecCommander for ur codec

[idris iqbal]

-brightness

have a patches in RehabMan repository, u can try a Brightness Fix (Haswell/Brodwell), if dont work, check here

BRIGHTNESS.zip

 

-battery

check in repository too if have ur model

 

-audio

u can try other ids and CodecCommander for ur codec

thank you so much maldon

I'll tray and report you again

for battery I has check in repository and no model for my laptop . I'm try adding flag "abm_firstpolldelay=16000" and no stuck battery percentage again

I've problem with headset since using 10.13.1, in 10.13.1 this problem solved using "ALCPlugfix" but in 10.13.2 its doesn't work

 

maldon, can you share me patch you are using for my DSDT??

thank you so much for your help maldon

I'm very appreciate

[MaLd0n]

i apply a essentials and cosmetics patches

-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-EHCI
-XHCI
-PLUGIN TYPE
-HDEF
-RTC
-IRQs
-SBUS
-BLC0
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-IMEI

sleep work?

[idris iqbal]

i apply a essentials and cosmetics patches

-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DMAC
-SLPB
-DARWIN
-LPC
-EHCI
-XHCI
-PLUGIN TYPE
-HDEF
-RTC
-IRQs
-SBUS
-BLC0
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-IMEI

sleep work?

thank you maldon, I'll note that and check them in DSDT

sleep work but close lid and open lid doesn't work

[MaLd0n]

 close lid and open lid doesn't work

what happens? dont sleep?

[idris iqbal]

what happens? dont sleep?

sorry maldon I'm late to replay

when I close lid machine doesn't sleep, indicator hdd still active and fan still working

once again maldon, can you help me for HDAU??

[MaLd0n]

try it for lid sleep

DSDT.lid.zip

dont work with open, u need press power

 

hdmi u can try config.plist? option UseHDMIIntel in Devices tab

[idris iqbal]

try it for lid sleep

DSDT.lid.zip

dont work with open, u need press power

 

hdmi u can try config.plist? option UseHDMIIntel in Devices tab

Thank you very much maldon

I try and report to you

[idris iqbal]

try it for lid sleep

DSDT.lid.zip

dont work with open, u need press power

 

hdmi u can try config.plist? option UseHDMIIntel in Devices tab

close and open lid work fin now maldon

I use first DSDT you give to me, I'm just adding USBX and eliminate port USB with SSDT UIAC

For HDMI I will test when I'm at home, because there is no device HDMI in my office

 

Thank you so much maldon

[idris iqbal]

try it for lid sleep

DSDT.lid.zip

dont work with open, u need press power

 

hdmi u can try config.plist? option UseHDMIIntel in Devices tab

Hello maldon

sorry I disturb you again

I has try UseIntelHDMI in config.plist but HDMI audi still not work

can you help me again, please

 

[MaLd0n]

Hello maldon

sorry I disturb you again

I has try UseIntelHDMI in config.plist but HDMI audi still not work

can you help me again, please

 

U try rehabman kexts?

Arquivo Comprimido.zip

[idris iqbal]

U try rehabman kexts?

Arquivo Comprimido.zip

sorry maldon, what kext do you mean??

[MaLd0n]

two kexts inside folder

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=278791

 

put in Library/Extension and run KextUtility by CVad

Kext Utility.app.zip

[idris iqbal]

two kexts inside folder

http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=278791

 

put in Library/Extension and run KextUtility by CVad

Kext Utility.app.zip

Ok maldon, thank you I'll try

I copy two kext in clover folder kext/10.13 but still not work for HDMI audio

I'll try this one

Thank you so much maldon

[MaLd0n]

Ok maldon, thank you I'll try

I copy two kext in clover folder kext/10.13 but still not work for HDMI audio

I'll try this one

Thank you so much maldon

k

let me know if u solution it

G.Luck

Enjoy

[idris iqbal]

k

let me know if u solution it

G.Luck

Enjoy

Hello maldon

sorry to late replay you again

HDMI audio still not work

this is I'm doing :

- copy two kext in Library/Extension and run KextUtility (with UseIntelHDMI and without UseIntelHDMI in config.plist/Device), still not work

- try add patch HDAU in SSDT, make same value layout id with HDEF and use KextToPatch HDMI audio to broadwell by rehabman (I has use this way before and work, but in this case I'm not rename B0D3 to HDAU and not rename GFX0 to IGPU.  it's not work now}

[YoYelloW]

Hi Maldon, can you create a decent dsdt for me? its for a tiny STX board H110M-STX-HD3 together with a i3-6100.

 

Right now it seems to work decent, but sleep/wake doesnt work nice..

[tbrautaset]

Mald0n!

 

Some help

Clover.zip

tbrautaset’s.ioreg.zip

Send me tbrautaset’s macBook Pro.zip

 

 

Edited November 25, 2020 by tbrautaset

[MaLd0n]

Hi Maldon, can you create a decent dsdt for me? its for a tiny STX board H110M-STX-HD3 together with a i3-6100.

 

Right now it seems to work decent, but sleep/wake doesnt work nice..

Try

CLOVER.zip

if work, send me new ioreg after reboot

if u have a problem press O key in Clover boot screen, go to Acpi Patching/DSDT Name and put DSDT02.aml

 

Hi Mald0n!

 

Need your magic again.  

 

 

MSI GE / Intel® 100 Series notebook MS-179B (GE72VR 7RF-272NE Apache Pro)

 

BIOS - Version:E179BIMS.30C - Release Date:2017-11-08

EC firmware - Version:179BEMS1.108 - Release Date:2017-11-15

 

macOS High Sierra - Version:10.13.2 - Release Date:2017-12-06

Clover_v2.4k - Version:_r4359.RM-4506.7036cf0a - Release Date:2017-12-16

 

 

Intel® Core™ i7 7700HQ processor  / HM175

GeForce® GTX 1060 3GB GDDR5

17.3" Full HD (1920x1080), 120 Hz Refresh Rate and 5ms response time panel

Cooler Boost 4 Technology ENHANCED COOLING DESIGN FOR HIGHER POWER

32GB Crucial DDR4 2400MHz SODIMM

NVMe M.2 SSD by PCI-E Gen 3.0 / Samsung 960 EVO 1TB M.2 NVMe SSD & WD Blue 1TB 2.5" SATA SSD

HL-DT-ST GUD0N SATA Int. DVD±RW (±R DL) / DVD-RAM

Realtek RTS5129 Card Reader (SD/SDHC/SDXC)

USB 3.1 SuperSpeed+

USB Type-C reversible plug

SHIFT technology boosts performance under controlled noise & temperature

Nahimic 2 virtual 7.1 sound / Realtek ALC898

BisonCam, NB Pro Webcam HD type (30fps@720p)

Audio Boost 2 WITH 3 dedicated headset amplifiers,isolated audio board and gold-plated audio jacks.

Dynaudio speaker system / 4x 2W Speakers & 1x 3W Subwoofer

Keyboard by Steelseries with full color backlighting / PS/2 Keyboard / Synaptics PS/2 & SMBus Multi-Touch Touchpad

Killer Shielded E2500 Gigabit Ethernet + Broadcom BCM94352Z 802.11AC

1x HDMI (HDMI 4K@30Hz) & 1x Mini DisplayPort 1.2. = HDTV/Matrix Display supports 4K output with a resolution up to 3840 x 2160

 

 

Clover.zip

tbrautaset’s.ioreg.zip

Send me tbrautaset’s macBook Pro.zip

 

check

CLOVER.zip

[newphase]

Hello again Mald0n;

I finished my High sierra (17C88) installation adventure. I could not get my GTX560TI display to work because of the "IOConsoleUsers: qIOScreenLockState 3, hs 0, bs 0 now 0 sn 0x0" error, and I could boot with the HD630. (I have booted in safe mode with MacBook Pro 13.1 config.plist while NVIDIA GTX video card was installed but I did not install the web drivers and gave up for not finding a solution). I have tried many SMBIOS settings but I have not been successful. Can you find a solution to this in your opinion?

I need new DSDT, you've already helped DSDT working with nvidia cards for Sierra.

One more thing; if the nvidia card works, can it work at the same time as the HD630?

 

Thanks for your help.

Send me phase’s iMac.zip

CLOVER.zip

config_mbp13_1.plist.zip

[tbrautaset]

On 12/31/2017 at 12:52 AM, MaLd0n said:

 

check

CLOVER.zip

 

ok

Edited November 25, 2020 by tbrautaset

[YoYelloW]

Try

CLOVER.zip

if work, send me new ioreg after reboot

if u have a problem press O key in Clover boot screen, go to Acpi Patching/DSDT Name and put DSDT02.aml

 

 

 

That didnt work with that dsdt. i disabled it as you said and system boots, but without sound. attached is new ioreg

[MaLd0n]

That didnt work with that dsdt. i disabled it as you said and system boots, but without sound. attached is new ioreg

use ur clover folder and my DSDT

DSDT.02.zip

 

use iMac17 smbios, if u need use gfx0 to igpu patch in config.plist

 

Hello again Mald0n;

I finished my High sierra (17C88) installation adventure. I could not get my GTX560TI display to work because of the "IOConsoleUsers: qIOScreenLockState 3, hs 0, bs 0 now 0 sn 0x0" error, and I could boot with the HD630. (I have booted in safe mode with MacBook Pro 13.1 config.plist while NVIDIA GTX video card was installed but I did not install the web drivers and gave up for not finding a solution). I have tried many SMBIOS settings but I have not been successful. Can you find a solution to this in your opinion?

I need new DSDT, you've already helped DSDT working with nvidia cards for Sierra.

One more thing; if the nvidia card works, can it work at the same time as the HD630?

 

Thanks for your help.

 

u can use same DSDT for all system

idk if line 5xx work in High Sierra, if u have a problem use intel hd

i think work in same time, f u have a problem use only 1

CLOVER.zip

 

Hi MaLd0n,

 

Thank you very much again and again for your incredible support!

 

Nice boot theme, BeautyDark 

 

After verbose startup, it stays stuck with the messages:

 

IOConsoleUsers: time(0) 0->, lln 0, llk 1,

IOConsoleUsers: gIOScreenLockState 3,hs 0, bs 0, now 0, sm 0x0

Should my dGPU (discreet NVidia GPU) controlled by NVidia Optimus be disabled with DSDT / SSDT edits?

 

 

Was told that MacBookPro14,3 is a poor choice and that I should rather use MacBookPro14.1 instead (or even MacBookPro11,1), do you have any SMBIOS opinion regarding my notebook?

 

ill check it

 

ur processsor, the best is macbpro14