Dark_Diver Posted September 16, 2015 Share Posted September 16, 2015 sakk, "10.10.5 14F27A" works on my PC, I just have some freezes when I use some programs or try open files from programs - I don't know why yet, my PC config is a bit complex. May be something with unsupported hardware (or I don't know with that - I'll try figure out later). By the way - I haven't changed pthread.kext, it's original from 10.10.5. I've just installed your kernel (just kernel, only one file), amfid and 3 kexts from archive "package 10.10.5" - after that kernel had booted in safe mode with nv_disable=1 and I've installed 10.10.5 on separate SSD. Do I need to replace original pthread.kext with somewhat else? And about kernel panic "HPETs not found" - which is the best way to fix that error: NullCPUPowerManagement.kext, right DSDT, may be kernel flag "cpus=1" or something else? I've just installed NullCPUPowerManagement.kext on fresh system after installation. During installation I have not had kernel panic (even without NullCPUPowerManagement.kext). P. S. I have used Chameleon r2716 and Enoch r2760 - with NVRam.dylib both have had "Memory Allocation Error" during boot. Have changed boot cache compression method to "lzss" already - error persists (but I've used kernel cache on boot. will try without cache.). 1 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168452 Share on other sites More sharing options...
spakk Posted September 17, 2015 Share Posted September 17, 2015 sakk, "10.10.5 14F27A" works on my PC, I just have some freezes when I use some programs or try open files from programs - I don't know why yet, my PC config is a bit complex. May be something with unsupported hardware (or I don't know with that - I'll try figure out later). By the way - I haven't changed pthread.kext, it's original from 10.10.5. I've just installed your kernel (just kernel, only one file), amfid and 3 kexts from archive "package 10.10.5" - after that kernel had booted in safe mode with nv_disable=1 and I've installed 10.10.5 on separate SSD. Do I need to replace original pthread.kext with somewhat else? And about kernel panic "HPETs not found" - which is the best way to fix that error: NullCPUPowerManagement.kext, right DSDT, may be kernel flag "cpus=1" or something else? I've just installed NullCPUPowerManagement.kext on fresh system after installation. During installation I have not had kernel panic (even without NullCPUPowerManagement.kext). P. S. I have used Chameleon r2716 and Enoch r2760 - with NVRam.dylib both have had "Memory Allocation Error" during boot. Have changed boot cache compression method to "lzss" already - error persists (but I've used kernel cache on boot. will try without cache.). Then read a little here: http://www.hackintoshosx.com/topic/20557-power-management-for-intel-i5-3210m-in-mavericks/page-2. in relation to ssdt.aml search for AMD.DMG of rampagedev and install, the right ssdt for your board and lead the changes in the link above Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168491 Share on other sites More sharing options...
Dark_Diver Posted September 17, 2015 Share Posted September 17, 2015 Current versions of Chameleon/Enoch contain FileNVRam.dylib ver. 1.1.3. I've found FileNVRAM.dylib & FileNVRAM.kext more recent version (1.1.4-81), which work in Yosemite. But not on my PC (yet) - OS boots normally, even file /Extra/nvram.plist has been created, but after reboot vars disappear and file nvram.plist stays unchanged. Now I'm trying to get NVRam working. P. S. with nv_disable=1 OS boots very quickly and there are no freezes and lags (but video is sloowww, of course). Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168505 Share on other sites More sharing options...
Duran Keeley Posted September 17, 2015 Author Share Posted September 17, 2015 Apple has released the source for 10.10.4 & 10.10.5 6 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168506 Share on other sites More sharing options...
spakk Posted September 17, 2015 Share Posted September 17, 2015 (edited) always the same game with the update of the source code. When we solve a problem, then Apple released a new source, nice I will tonight, check after work, which benefits brings the new kernel for my AMD hackintosh. Edited September 17, 2015 by spakk 2 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168522 Share on other sites More sharing options...
Shaneee Posted September 17, 2015 Share Posted September 17, 2015 Will try build it when xCode is downloaded but no promises. Wonder if the 10.10.5 xnu will boot El Capitan Edit: Maybe we should wait till someone who knows what they are doing Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168538 Share on other sites More sharing options...
spakk Posted September 17, 2015 Share Posted September 17, 2015 I build the kernel later with my real mac 2 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168543 Share on other sites More sharing options...
y2k4u Posted September 17, 2015 Share Posted September 17, 2015 Here is the AMD patched kernel for 10.10.4. 10104R1.zip 7 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168557 Share on other sites More sharing options...
gils83 Posted September 17, 2015 Share Posted September 17, 2015 Here is the AMD patched kernel for 10.10.4. 10104R1.zip no , idem 14.0 and 14.3 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168605 Share on other sites More sharing options...
y2k4u Posted September 17, 2015 Share Posted September 17, 2015 More goodies: Install the following kernel on a clean 10.10.5 installation. Just add your normal kexts needed for Yosemite. 10105R1.zip 7 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168611 Share on other sites More sharing options...
lpukraine Posted September 17, 2015 Share Posted September 17, 2015 More goodies: Install the following kernel on a clean 10.10.5 installation. Just add your normal kexts needed for Yosemite. 10105R1.zip Can I update via App Store from working 10.10.4 to 10.10.5? After update need to replace only this kernel? Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168612 Share on other sites More sharing options...
y2k4u Posted September 17, 2015 Share Posted September 17, 2015 @y2k4u, you need to use xnu-2782.40.9 for 10.10.5 not xnu-2782.30.5 for 0.10.4 What do you mean? 10104R1.zip is 10.10.4 kernel for Yosemite 10.10.4. 10105R1.zip is 10.10.5 kernel for Yosemite 10.10.5 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168615 Share on other sites More sharing options...
y2k4u Posted September 17, 2015 Share Posted September 17, 2015 Can I update via App Store from working 10.10.4 to 10.10.5? After update need to replace only this kernel? I have not tried that path but I don't see why not. Try it and you'll be the first. I think we wait even better to the current kernel 10.10.5 No need to wait. 10105R1.zip above is 10.10.5 kernel for Yosemite 10.10.5. Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168618 Share on other sites More sharing options...
lpukraine Posted September 17, 2015 Share Posted September 17, 2015 I have not tried that path but I don't see why not. Try it and you'll be the first. Sorry, but not this time. Need a stable working system. Now I don't have time to test. Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168620 Share on other sites More sharing options...
gils83 Posted September 17, 2015 Share Posted September 17, 2015 yeh !!!! very good job man !! works very good with Extensions vanilla 10.10.5 !! no error symbol kernel 6 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168621 Share on other sites More sharing options...
y2k4u Posted September 17, 2015 Share Posted September 17, 2015 yeh !!!! very good job man !! works very good with Extensions vanilla 10.10.5 !! no error symbol kernel Clean install or update to 10.10.5? Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168624 Share on other sites More sharing options...
gils83 Posted September 17, 2015 Share Posted September 17, 2015 Parallels 10 works good , MplayerX H265 works good and all applications Clean install or update to 10.10.5? Yes , use iopci/acpi patched (for graphics) UEFI bios 3 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168625 Share on other sites More sharing options...
J0hny Posted September 17, 2015 Share Posted September 17, 2015 Very Good News! Maybe try it next week...) Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168636 Share on other sites More sharing options...
gils83 Posted September 17, 2015 Share Posted September 17, 2015 test video HEVC h265 decode work very good (capture SF 4.5) look : http://www.sendbox.fr/87884ab8d9b9fca6/test.zip 1 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168645 Share on other sites More sharing options...
yakei Posted September 17, 2015 Share Posted September 17, 2015 OS X El Capitan is coming Sept 30: perhaps one should skip for AMD a version . never these cool AMD would to be change to EL Capitan. Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168647 Share on other sites More sharing options...
Shaneee Posted September 17, 2015 Share Posted September 17, 2015 Got this using the 10.10.5 kernel Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168651 Share on other sites More sharing options...
J0hny Posted September 17, 2015 Share Posted September 17, 2015 Got this using the 10.10.5 kernel IMG_20150917_212534.jpg Maybe try to use pthread.kext... Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168652 Share on other sites More sharing options...
gils83 Posted September 17, 2015 Share Posted September 17, 2015 (edited) Got this using the 10.10.5 kernel IMG_20150917_212534.jpg ??? works good for me Edited September 18, 2015 by gils83 1 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168653 Share on other sites More sharing options...
y2k4u Posted September 18, 2015 Share Posted September 18, 2015 Got this using the 10.10.5 kernel IMG_20150917_212534.jpg Probably due to previously patched kexts corrupting 10.10.5. Did you try a clean install? ??? works good for me oops @ y2k4u use corecrypto/pthread Yosemite 10.10 On my clean install, I did not have to change any kexts except for my usual graphics/sound/NForce patches. No corecrypto/pthread needed. 1 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168692 Share on other sites More sharing options...
pico joe Posted September 18, 2015 Share Posted September 18, 2015 Yes .. finally the kernel is work in my rig .... thanks y2k4u ... (y) Note: only change pthread. kext (tora chiyo) 3 Link to comment https://www.insanelymac.com/forum/topic/302075-amd-yosemite-kernel-testing-for-help-use-the-help-topic/page/62/#findComment-2168697 Share on other sites More sharing options...
Recommended Posts