atiom Posted March 22, 2007 Share Posted March 22, 2007 I got TI PCIxx12 with the id on the topic 104C:8039 It keeps frozing every boot I guess it is the memory tanges but after reading the entire post i just can't understand where to edit to put my memory ranges. lspci goes like this: 08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 18 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 58000000-5bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 Any pointer in the right direction would be greatly appreciated. Cheers Link to comment Share on other sites More sharing options...
r5a Posted March 22, 2007 Share Posted March 22, 2007 One of the earlier pages, bugs bunny put up a program to edit your plist file, I forgot the name of it, it's in here somewhere. Use that to open your info.plist, scroll to your respective selection wheres its like ADC2,1 or whatever, and then it will say memory ranges, just enter them in there and it will be converted for you. Link to comment Share on other sites More sharing options...
NHJ Posted March 22, 2007 Share Posted March 22, 2007 I got TI PCIxx12 with the id on the topic 104C:8039It keeps frozing every boot I guess it is the memory tanges but after reading the entire post i just can't understand where to edit to put my memory ranges. lspci goes like this: 08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 18 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 58000000-5bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 Any pointer in the right direction would be greatly appreciated. Cheers disable the firewire in bios Link to comment Share on other sites More sharing options...
atiom Posted March 22, 2007 Share Posted March 22, 2007 I finally figured it out and put in my i/o and memory ranges using plist editor. Now this is the output for my dmesg | grep PC Thanks everybody for your help IOPCCard notice: AdjustResourceInfo: Bad size IOPCCardBridge::start failed AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled FireWire (OHCI) TI ID 803a PCI now active, GUID 653f0200c6334084; max speed s400. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080BH Media/IOFDiskPartitionScheme/Untitled 1@1 Link to comment Share on other sites More sharing options...
Matthew Jason Posted March 31, 2007 Share Posted March 31, 2007 Greetings, I am using the same card controller with my Toshiba R200 Laptop. However, this is what I get: AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/FNC1@1F,1/AppleIntelPIIXATARoot/IDE0@0/AppleIntelPIIXPATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK6006GAH Media/IOFDiskPartitionScheme/Untitled 3@3 IOPCCard info: Intel PCIC probe: not found. IOPCCardBridge::start failed Strange huh? Anyone could help me please? Thanks. Matthew Link to comment Share on other sites More sharing options...
tuxx Posted April 12, 2007 Share Posted April 12, 2007 Hi, Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges). The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me. thanks probono for sharing this, tuxx. Link to comment Share on other sites More sharing options...
FavleX Posted April 12, 2007 Share Posted April 12, 2007 @TUXX I am like Speddish got the same 5612 Acer so the same ENE clone or something for my PCMCIA , do you think I should try your kext on my lap?? Link to comment Share on other sites More sharing options...
britt Posted April 25, 2007 Share Posted April 25, 2007 hi am running osx 10.4.9, native on a toshiba satellite a135-s4427, intel centrino duo 1.73,2gigs ram , intel 945GM express chipset, just upgraded to the latest netkas kernel, which seemed to fix my sound,video,fsb,clock probs, but? i have a built in texas inst 5 in 1 card reader which does not work at all ? and when i try a usb card reader my system freezes after about 25 mb of file transfer and has to be rebooted ?? anyone know where i can get a driver or how to get it to recognize the built in one ??? many thanks Link to comment Share on other sites More sharing options...
lucioluzzatto Posted May 20, 2007 Share Posted May 20, 2007 Hi I am really trying to put the my PCMCIA card controller working. I have tryied the solution on this post but did not succeeded because of some dificulties using the plist editor and changing the values. I am really desperate about yhis because I NEED to use a PCMCIA wireless as I will use an external antena plugged on it. My output on Linux is: 06:04.0 CardBus bridge: Texas Instruments Unknown device 8039 Subsystem: Toshiba America Info Systems Unknown device ff00 Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at dc006000 (32-bit, non-prefetchable) Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00005000-000050ff I/O window 1: 00005400-000054ff 16-bit legacy interface ports at 0001 Is there any way that you could help me modifying the IOPCCardFamily driver? With my values?? I would be really thankfull and also would be able to post de driver to other Toshiba A135-S4527 users. Thank you very much for your attention Lucio Luzzatto. Hi, Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges). The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me. thanks probono for sharing this, tuxx. Link to comment Share on other sites More sharing options...
tuxx Posted June 12, 2007 Share Posted June 12, 2007 Hi, I just upated my 10.4.8 to 10.4.9 and my modified IOPCCardFamily.kext stopped working... I am using the same kext as before (replaced 10.4.9 one with my backup from 10.4.8)... does anyone know why this might have happened? Thanks, tuxx Link to comment Share on other sites More sharing options...
tkman Posted June 14, 2007 Share Posted June 14, 2007 I don't typically like to beg for help, but I'm just about to give up on this. Before I do that I'd like to see if anyone can help me figure this one out. Specs: IBM Thinkpad R51 2888-5RU/Jas 10.4.8 SSE2/SSE3 lspci -vvn from Ubuntu 7.04 shows: 02:00.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 03) Subsystem: IBM Unknown device [1014:0560] Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at b0000000 (32-bit, non-prefetchable) Bus: primary=02, secondary=03, subordinate=04, sec-latency=176 Memory window 0: f0000000-f3fff000 (prefetchable) Memory window 1: d4000000-d7fff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff 16-bit legacy interface ports at 0001 I've been using wondergod's IOPCCardFamily.kext. I have modified Info.plist, and to the best of my ability the binary driver using ac44 as the device ID. I get the following in dmesg: ACPI: System State [s0 S3 S4 S5] (S3) IOPCCardBridge::start failed Security auditing service present BSM auditing present disabled From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><str ing ID="2">boot-uuid-media</string></dict> FireWire (OHCI): start - unable to get device memory FireWire (OHCI): start - unable to get device memory I've tried Glitchman's drivers as well a BugsBunny's IOPCIFamily.kext. Both recognize the IOPCCardBridge, but render the system unusable. I've only been able to recover from Glitchman's drivers. Any ideas would be greatly appreciated, but at this point I've pretty much given up. Link to comment Share on other sites More sharing options...
nonamez78 Posted June 18, 2007 Share Posted June 18, 2007 Hi, I just upated my 10.4.8 to 10.4.9 and my modified IOPCCardFamily.kext stopped working... I am using the same kext as before (replaced 10.4.9 one with my backup from 10.4.8)... did you find a solution? my pcmcia won't work on 10.4.9, too. Link to comment Share on other sites More sharing options...
Alpha4 Posted July 4, 2007 Share Posted July 4, 2007 hi am running osx 10.4.9, native on a toshiba satellite a135-s4427,intel centrino duo 1.73,2gigs ram , intel 945GM express chipset, just upgraded to the latest netkas kernel, which seemed to fix my sound,video,fsb,clock probs, but? i have a built in texas inst 5 in 1 card reader which does not work at all ? and when i try a usb card reader my system freezes after about 25 mb of file transfer and has to be rebooted ?? anyone know where i can get a driver or how to get it to recognize the built in one ??? many thanks hi britt, can you help me? i've a toshiba a100-115 that i think should be similar. i have 10.4.8 native and my pcmcia won't work. i can upgrade to 1.4.9. After that, what I've to do? this is my config from kanotix 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Toshiba America Info Systems Unknown device ff10 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at f0907000 (32-bit, non-prefetchable) Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 can you post your kext? Link to comment Share on other sites More sharing options...
Dainix Posted July 6, 2007 Share Posted July 6, 2007 Am attempting to get this kernel extension working. So far, it's mostly been failures to start up. I was able to get the extension to start up once, but right afterwords, the system locked up. It happened right before the Firewire driver initialization, in which someone suggested to disable it at the BIOS level, but this option wasn't available. I also noticed that the "Bad size" error I get could be triggered by my memory ranges, as two ranges conflict with each other. These ranges were, of course, taken from Windows XP. I'll try to find the correct ranges tonight with a Linux Live CD, and see if the values differ at all. Wouldn't hurt to try both ACPI and non-ACPI, if I'm that desperate. Link to comment Share on other sites More sharing options...
Sysiphysus Posted July 20, 2007 Share Posted July 20, 2007 can you send me the kext, thank you so much! my D620 id is 104c: 8036 too, thanks!!! Hi, Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges). The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me. thanks probono for sharing this, tuxx. Link to comment Share on other sites More sharing options...
Sysiphysus Posted July 20, 2007 Share Posted July 20, 2007 up~ can you send me the kext, thank you so much! my D620 id is 104c: 8036 too, thanks!!! Link to comment Share on other sites More sharing options...
britt Posted July 20, 2007 Share Posted July 20, 2007 hi britt, can you help me? i've a toshiba a100-115 that i think should be similar.i have 10.4.8 native and my pcmcia won't work. i can upgrade to 1.4.9. After that, what I've to do? this is my config from kanotix 07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Toshiba America Info Systems Unknown device ff10 Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at f0907000 (32-bit, non-prefetchable) Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: 50000000-51fff000 (prefetchable) Memory window 1: 52000000-53fff000 I/O window 0: 00004400-000044ff I/O window 1: 00004800-000048ff 16-bit legacy interface ports at 0001 can you post your kext? i still havent managed to get mine working either, i am waiting till the next osx release with the hope that that will fix my issue ?sorry,britt Link to comment Share on other sites More sharing options...
Sysiphysus Posted July 20, 2007 Share Posted July 20, 2007 I just want get the driver id=104c: 8036 ,anybody can help me? thanks! Link to comment Share on other sites More sharing options...
pspmac Posted August 10, 2007 Share Posted August 10, 2007 I almost got my nc6320 working. I just replaced IOPCCardfamily.kext and that didn't work, kernal panic. Then i replaced all the files from the other post with the zip file extenstions.zip. And it saw the PC card but then i got USB wake event. But i saw that it saw the pc card TI xx12. So i have to put the orginal files back. I did edit the file and put in the memory address. Should i have to replace any other file than IOPCardfamily? Also that file doesn't exist. I can't seem to just add that file causes painc except for when i replaced them all. Any ideas? would really like to get this working so, i can get some kinda of wireless. I have a sony gc83 cell card that will work. Anyone know if it is possible to get the netgear wpn111 usb wireless working? Thanks, this board has been super helpful, couldn't of gotten this far without everyones hard work! Link to comment Share on other sites More sharing options...
kizwan Posted August 10, 2007 Share Posted August 10, 2007 I don't typically like to beg for help, but I'm just about to give up on this. Before I do that I'd like to see if anyone can help me figure this one out. Specs: IBM Thinkpad R51 2888-5RU/Jas 10.4.8 SSE2/SSE3 lspci -vvn from Ubuntu 7.04 shows: 02:00.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 03) Subsystem: IBM Unknown device [1014:0560] Flags: bus master, medium devsel, latency 168, IRQ 11 Memory at b0000000 (32-bit, non-prefetchable) Bus: primary=02, secondary=03, subordinate=04, sec-latency=176 Memory window 0: f0000000-f3fff000 (prefetchable) Memory window 1: d4000000-d7fff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff 16-bit legacy interface ports at 0001 I've been using wondergod's IOPCCardFamily.kext. I have modified Info.plist, and to the best of my ability the binary driver using ac44 as the device ID. I get the following in dmesg: ACPI: System State [s0 S3 S4 S5] (S3) IOPCCardBridge::start failed Security auditing service present BSM auditing present disabled From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><str ing ID="2">boot-uuid-media</string></dict> FireWire (OHCI): start - unable to get device memory FireWire (OHCI): start - unable to get device memory I've tried Glitchman's drivers as well a BugsBunny's IOPCIFamily.kext. Both recognize the IOPCCardBridge, but render the system unusable. I've only been able to recover from Glitchman's drivers. Any ideas would be greatly appreciated, but at this point I've pretty much given up. Did you try disable your FireWire at your bios? I think someone has suggest this before. Link to comment Share on other sites More sharing options...
kizwan Posted August 12, 2007 Share Posted August 12, 2007 I don't have IOPCCardFamily.kext at my notebook (10.4.8). What is this mean? My PCMCIA is not supported at all? Link to comment Share on other sites More sharing options...
kizwan Posted August 14, 2007 Share Posted August 14, 2007 I have just tried and it didn't work for me.When I plug the PCMCIA card into the slot, and run "sudo dmesg | grep PC", the following information comes to me:IOPCCard info: cs: cb_alloc(bus 3): vendor 0x1186, device 0x1340IOPCCard info: cs: cb_alloc(bus 3): found 1 functionsIOPCCard info: cs: cb_config(bus 3)IOPCCard info: fn 0 bar 1: io 0x3400-0x34ffIOPCCard info: fn 0 bar 2: mem 0x30001000-0x300011ffIOPCCard info: irq 11Any help?What I can tell you is that your PCMCIA card actually have properly detected/recognized by OSX. But you still cannot use it yet. You need to install the actual driver for your PCMCIA card. Which model of your PCMCIA card? Maybe I can google for you. can anybody build a kext with my configuration, maybe i did wrong mine......In this case i can confront the two kext....thanks for all I attached here the Info.plist that you need. I have edited it with your I/O & memory range.Don't forget to repair pemission after you copy the file to it original location (IOPCCardFamily.kext).After reboot, if you see error like this:-Unknow error 0xfffffff (something like that. need to run dmesg | grep PC)That mean you almost there. :censored2:ugriecu_Info.plist.zip Link to comment Share on other sites More sharing options...
zcdohl Posted August 17, 2007 Share Posted August 17, 2007 hi, anyone have IOPCCardFamily.kext for 10.4.9 Installed on my acer 5672wlmi ? Thanks.. Link to comment Share on other sites More sharing options...
gzshy Posted August 24, 2007 Share Posted August 24, 2007 Anyone get this work with Toshiba ToPIC100 cardbus ?? Link to comment Share on other sites More sharing options...
Dag0n Posted August 30, 2007 Share Posted August 30, 2007 I have been trying to get this to work for months now, so much so i went out and found other means for my wireless internet (was gonna use an atheros card) I am using Uphuck 1.3 on an acer aspire 9423. my ranges from ubuntu and backtrack are both the same which are mem0= 88000000-8BFFF000 mem1= 8C000000-8BFFF000 I/O0= 000060000-000060FF I/O1= 000064000-0000064FF but that bring up IOPCCardBridge::checkBridgeBusIDs invalid sub/cardbus/pci settings of 0x0 any ideas anyone, would be most appreciated Link to comment Share on other sites More sharing options...
Recommended Posts