Jump to content
InsanelyMac Forum

atiom

Members
  • Content count

    20
  • Joined

  • Last visited

About atiom

  • Rank
    InsanelyMac Protégé
  1. atiom

    Generic USB2.0 (EHCI) Driver

    bugs is the usb fix for 10.5.2 working for you in 10.5.4?
  2. atiom

    Generic USB2.0 (EHCI) Driver

    anyone who got this compiled for 10.5.3 is kind enough to share it? Thank you
  3. atiom

    Laptops vga output

    I need some colaboration please. Can people that only get external screen get me a screenshot of system profiler and dmesg log?? I would greatly appreciate it. It would be nice if some of the vaio users out there with geforce go 7400 can do this. Maybe i can help them, maybe it's related. Cheers
  4. atiom

    Laptops vga output

    I read from some people that they can't get their laptops external output to work even if they internal screen works perfectly. Here's my best setup yet on geforce go 7400 128mb+128mb vm OSX86 10.49 Natit dual v0.0.2 Nvidia efi With this setup if, i connect the external screen prior to booting it still boots in the internal screen but recognizes it as the external, and assumes its resolution. Guess it should be easy to make it work if we know where to look. Any fellows in the same situation post specs, here, keep it clean plz Anyone who can give us help, please do Cheers
  5. atiom

    Photoshop crash !

    running 10.4.9 same thing...
  6. atiom

    geforce go 7400!...please help....

    i got a 7400 go that works perfectly in my hp laptop with natit dual v2, also with titan. must be something laptop specific.
  7. I got an Hp pavillion with a geforce 7400 go. Got full qe/ci at native resolution 1280x800. But... i would like to use an external monitor with my laptop. So i plugged in my samsung 940bw 19"wide 1440x900 to the vga port on the laptop. It boots on both screens, get to the grey screen and then, it loses signal on external monitor an finishes boot only on laptop screen. Fn switch monitor doesn't work. without drivers (i use natit v.02 dual) it boots on both displays (mirrored) at 1024x768. Any ideas hot to get it working? Any help would be greatly appreciated. Cheers
  8. atiom

    AppleHDA Solution - Work in progress

    I only get 2ch audio using an edited appleazaliaaudio.kext Here is my dump, maybe someone can manage to get it working. Notebook is hp pavillion5184ea Codec: Conexant CX20551 (Waikiki) Address: 0 Vendor Id: 0x14f15047 Subsystem Id: 0x103c30a5 Revision Id: 0x100000 Default PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x18 0x18] PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Power: 0x0 Node 0x11 [Audio Output] wcaps 0x611: Stereo Digital PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Power: 0x0 Node 0x12 [Audio Input] wcaps 0x100d1b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x8a 0x8a] [0x8a 0x8a] [0x80 0x80] [0x80 0x80] [0x0a 0x0a] PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Power: 0x0 Connection: 6 0x19 0x14 0x15 0x1a* 0x16 0x10 Node 0x13 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x98 0x98] Pincap 0x081001c: OUT HP EAPD Detect Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown Pin-ctls: 0x40: OUT Power: 0x0 Connection: 3 0x19* 0x10 0x16 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x91 0x91] Pincap 0x0833c: IN OUT HP Detect Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Power: 0x0 Connection: 2 0x19* 0x16 Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x91 0x91] Pincap 0x0833c: IN OUT HP Detect Pin Default 0x02a1102e: [Jack] Mic at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x21: IN Power: 0x0 Connection: 3 0x1c* 0x19 0x16 Node 0x16 [Pin Complex] wcaps 0x400401: Stereo Pincap 0x0860: IN Pin Default 0x94330121: [Fixed] CD at Int Right Conn = ATAPI, Color = Unknown Pin-ctls: 0x20: IN Power: 0x0 Node 0x17 [Pin Complex] wcaps 0x400481: Stereo Pincap 0x08324: IN Detect Pin Default 0x95a70122: [Fixed] Mic at Int Top Conn = Analog, Color = Unknown Pin-ctls: 0x21: IN Power: 0x0 Node 0x18 [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x0810: OUT Pin Default 0x04440131: [Jack] SPDIF Out at Ext Right Conn = RCA, Color = Unknown Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 0x11 Node 0x19 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1 Amp-In vals: [0x17 0x17] [0x9a 0x9a] [0x80 0x80] [0x17 0x17] Power: 0x0 Connection: 4 0x10 0x1b 0x1a 0x16 Node 0x1a [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x1f, mute=0 Amp-Out vals: [0x03 0x03] Power: 0x0 Connection: 3 0x15 0x14 0x17* Node 0x1b [Audio Selector] wcaps 0x300501: Stereo Power: 0x0 Connection: 2 0x14* 0x15 Node 0x1c [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x9b 0x9b] PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Power: 0x0 Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1e, stepsize=0x05, mute=1 Amp-Out vals: [0x91 0x91] Pincap 0x08314: OUT Detect Pin Default 0x40100180: [N/A] Speaker at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x40: OUT Power: 0x0 Connection: 3 0x1c 0x19* 0x16 Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
  9. I finally figured it out and put in my i/o and memory ranges using plist editor. Now this is the output for my dmesg | grep PC Thanks everybody for your help IOPCCard notice: AdjustResourceInfo: Bad size IOPCCardBridge::start failed AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled FireWire (OHCI) TI ID 803a PCI now active, GUID 653f0200c6334084; max speed s400. Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080BH Media/IOFDiskPartitionScheme/Untitled 1@1
  10. I got TI PCIxx12 with the id on the topic 104C:8039 It keeps frozing every boot I guess it is the memory tanges but after reading the entire post i just can't understand where to edit to put my memory ranges. lspci goes like this: 08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Hewlett-Packard Company Unknown device 30a5 Flags: bus master, medium devsel, latency 168, IRQ 18 Memory at d2004000 (32-bit, non-prefetchable) Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176 Memory window 0: 50000000-53fff000 (prefetchable) Memory window 1: 58000000-5bfff000 I/O window 0: 00002400-000024ff I/O window 1: 00002800-000028ff 16-bit legacy interface ports at 0001 Any pointer in the right direction would be greatly appreciated. Cheers
  11. atiom

    1280 x 800 Widescreen not available

    for qe/cg/opengl From the callisto FAQ file(quoting a forum quote): 11.How do I get the QE/CI/OpenGL KEXTs to work with Callisto? Look in your /System/Library/Extensions folder for ATIRadeonXXXXGA.plugin/ (XXXX depends on your card model). Edit its Info.plist, under IOProviderClass key change IONDRVFramebuffer to CallistoFB, update or delete Extensions.mkext and Extensions.kextcache, then reboot
  12. atiom

    1280 x 800 Widescreen not available

    search the forum!current solution for you is callisto drivers. http://omni.starchaser.org
  13. It depends. In my case (mobility 9700 64mb) if i install with mobility patch, screen gets srambled in normal mode. Else i got 1024x768 only which is not native res and qe/cg active. I installed callisto b03 for full res support. You should do some research in the forum, i have seen some topics regarding your graphics. but if u get your res in safe mode i think you will also get it in normal, mode using same method. As for qe/cg i don't know, just click search
  14. reinstall and do NOT install mobility patch cheers if u are not willing to reinstall remove your ATIRadeon extensions from Extensions folders but u can't get QE/CG this way.
  15. i got qe and coregraphics with 1280x800, looks perfect =)
×