theconnactic Posted October 31, 2013 Share Posted October 31, 2013 I confess i'm having lots of difficulties to enable my HD 5450 Silent (device 0x68F91002) under Mavericks. The procedures i took for granted until now - editing the ATI5000 and the AMDx3000 kexts, adding Toleda's patch to my DSDT so i have HDMI audio and booting with GraphicsEnabler=No - aren't working for me this time: the stock AMD5000Controler.kext (formerly ATI5000) doesn't appear to have either an Info.plist or a Version.plist (it's not simply invisible, since ShowAllFiles doesn't make them to show up) and adding them by pasting Lion's both files didn't help at all. The result is i don't have either QE/Ci or proper resolution for my 40'' screen (connected via HDMI) or audio when I boot with GraphicsEnabler=No, and with GE=Yes i'd be stuck indefinitely with the spinning boot wheel. I'm yet to perform these troubleshooting steps: - Boot without my current DSDT (thus using GE=Yes): i don't know if something changed from ML to Mavericks in this regard; - Boot with PCIRootUID=1, both with and without my current DSDT; - Copy the plists from ML's kext instead of Lion's and apply all above steps. If this doesn't take me anywhere, i'll really need help and will report here. All the best! Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961770 Share on other sites More sharing options...
Duran Keeley Posted October 31, 2013 Share Posted October 31, 2013 I confess i'm having lots of difficulties to enable my HD 5450 Silent (device 0x68F91002) under Mavericks. The procedures i took for granted until now - editing the ATI5000 and the AMDx3000 kexts, adding Toleda's patch to my DSDT so i have HDMI audio and booting with GraphicsEnabler=No - aren't working for me this time: the stock AMD5000Controler.kext (formerly ATI5000) doesn't appear to have either an Info.plist or a Version.plist (it's not simply invisible, since ShowAllFiles doesn't make them to show up) and adding them by pasting Lion's both files didn't help at all. The result is i don't have either QE/Ci or proper resolution for my 40'' screen (connected via HDMI) or audio when I boot with GraphicsEnabler=No, and with GE=Yes i'd be stuck indefinitely with the spinning boot wheel. I'm yet to perform these troubleshooting steps: - Boot without my current DSDT (thus using GE=Yes): i don't know if something changed from ML to Mavericks in this regard; - Boot with PCIRootUID=1, both with and without my current DSDT; - Copy the plists from ML's kext instead of Lion's and apply all above steps. If this doesn't take me anywhere, i'll really need help and will report here. All the best! Try the GM (13A598) Version, it has both the Info & Version inside. AMD5000Controller.kext.zip Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961772 Share on other sites More sharing options...
Shaneee Posted October 31, 2013 Share Posted October 31, 2013 I confess i'm having lots of difficulties to enable my HD 5450 Silent (device 0x68F91002) under Mavericks. The procedures i took for granted until now - editing the ATI5000 and the AMDx3000 kexts, adding Toleda's patch to my DSDT so i have HDMI audio and booting with GraphicsEnabler=No - aren't working for me this time: the stock AMD5000Controler.kext (formerly ATI5000) doesn't appear to have either an Info.plist or a Version.plist (it's not simply invisible, since ShowAllFiles doesn't make them to show up) and adding them by pasting Lion's both files didn't help at all. The result is i don't have either QE/Ci or proper resolution for my 40'' screen (connected via HDMI) or audio when I boot with GraphicsEnabler=No, and with GE=Yes i'd be stuck indefinitely with the spinning boot wheel. I'm yet to perform these troubleshooting steps: - Boot without my current DSDT (thus using GE=Yes): i don't know if something changed from ML to Mavericks in this regard; - Boot with PCIRootUID=1, both with and without my current DSDT; - Copy the plists from ML's kext instead of Lion's and apply all above steps. If this doesn't take me anywhere, i'll really need help and will report here. All the best! Here you go save to the hassle of editing them yourself. theconnactic.zip Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961776 Share on other sites More sharing options...
theconnactic Posted October 31, 2013 Share Posted October 31, 2013 Thank you both, Shane and Duran: you guys rock! 1 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961781 Share on other sites More sharing options...
Shaneee Posted October 31, 2013 Share Posted October 31, 2013 Thank you both, Shane and Duran: you guys rock! You have helped me many times just returning the favour If your lucky like me with the HD 5450 you will get basically no artefacts. (0x68E11002) Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961784 Share on other sites More sharing options...
TrvHrt Posted November 1, 2013 Share Posted November 1, 2013 So after getting lion running smoothly thanks Shane. I've had issues trying to get my sound working. I've tried many kexts and different settings but I can seem to get them Can you help? Would it be possible to get sound via my 5750? Thanks Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1961896 Share on other sites More sharing options...
Chris Etheridge Posted November 1, 2013 Share Posted November 1, 2013 Trav this may not work but give it a shot. Firstly make sure the Voodoo settings are setup correctly and also enable the menu bar icon of the volume, and then just click it and slide it up and down. I had the same sort of problem - nothing would fix my audio, but as soon as I just used the menu bar volume applet once it worked 100% somehow. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962065 Share on other sites More sharing options...
TrvHrt Posted November 1, 2013 Share Posted November 1, 2013 Ok I'll try it. But I don't even know which voodoo Kext I need to use. There's so many. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962127 Share on other sites More sharing options...
Shaneee Posted November 1, 2013 Share Posted November 1, 2013 Ok I'll try it. But I don't even know which voodoo Kext I need to use. There's so many. I found this kext which should support your system. Remove VoodooHDA and install to System/Library/Extensions, Repair permissions and reboot. ViaHDA.kext.zip Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962248 Share on other sites More sharing options...
TrvHrt Posted November 2, 2013 Share Posted November 2, 2013 tried both methods neither worked unfortunately. thanks though Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962407 Share on other sites More sharing options...
AkimoA Posted November 2, 2013 Share Posted November 2, 2013 u could always try the good old Azalia Audio http://www.cl.ly/230c3g0U240S000P2i3u be shure to remove the others before repair perm etc. if it panics disable audio in bios boot back in and delete it if that is a no dont be shy and try to go back a couple Voodoo HDA Versions sometimes works too Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962522 Share on other sites More sharing options...
TrvHrt Posted November 3, 2013 Share Posted November 3, 2013 Ok thanks ill give that a shot. It didn't work ill try a few old voodoo Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1962926 Share on other sites More sharing options...
theconnactic Posted November 3, 2013 Share Posted November 3, 2013 Trav, what kind of sound are you trying to enable? Is it for your speakers? Or is it HDMI audio? If it's HDMI audio, no VoodooHDA will help you, ever. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963010 Share on other sites More sharing options...
TrvHrt Posted November 3, 2013 Share Posted November 3, 2013 Trying to get my sound working through my monitor. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963038 Share on other sites More sharing options...
theconnactic Posted November 3, 2013 Share Posted November 3, 2013 That is, HDMI audio, from your graphics card. It's not an AMD-specific help subject, but a general post-installation step instead. Just ask for directions here: http://www.insanelymac.com/forum/topic/290796-realtek-alc-applehda-audio-injection/?hl=%2Bhdmi+%2Baudio+%2Btoleda&do=findComment&comment=1961229 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963163 Share on other sites More sharing options...
TrvHrt Posted November 3, 2013 Share Posted November 3, 2013 Thanks I'll take a look. Learnt a lot past week hopefully can pass my knowledge on to others. Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963243 Share on other sites More sharing options...
Cexx Posted November 5, 2013 Share Posted November 5, 2013 Hii, I have a problem I'm trying to install iatkos ML2 the machine MB: Asus M2N68-AM SE2 CPU: AMD Athlon x2 240 The problem is that my motherboard does not support AHCI. The disk utility before installing, not showing HDD. So I wonder if there is any kext or something to do it. Here's a picture; Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963928 Share on other sites More sharing options...
Diazz72 Posted November 5, 2013 Share Posted November 5, 2013 Hii, I have a problem I'm trying to install iatkos ML2 the machine MB: Asus M2N68-AM SE2 CPU: AMD Athlon x2 240 The problem is that my motherboard does not support AHCI. The disk utility before installing, not showing HDD. So I wonder if there is any kext or something to do it. Here's a picture; NOP - No AHCI no MAC. . .Sorry Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963995 Share on other sites More sharing options...
heineken99 Posted November 5, 2013 Share Posted November 5, 2013 hello everybody, any news on installing mac on APU's? still trying to install mac (Lion/ML) on the note of my signature... Snow Leopard runs, but it is not really satisfactory... Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963998 Share on other sites More sharing options...
Shaneee Posted November 5, 2013 Share Posted November 5, 2013 I don't have the AHCI option and i have OS X running fine. You just need a kext for your chipset eg AppleNForceATA like me for nForce 430 board. I don't have the AHCI option and i have OS X running fine. You just need a kext for your chipset eg AppleNForceATA like me with nForce 430 board. 1 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1963999 Share on other sites More sharing options...
Cexx Posted November 5, 2013 Share Posted November 5, 2013 (edited) I don't have the AHCI option and i have OS X running fine. You just need a kext for your chipset eg AppleNForceATA like me for nForce 430 board. I don't have the AHCI option and i have OS X running fine. You just need a kext for your chipset eg AppleNForceATA like me with nForce 430 board. How do I find which kext for my chipset nForce 630a ??? In 10.5.6 i use AppleNForceATA.kext and all work fine Edit: And when i find the kext i will put it in E/E on installation USB ? Edited November 5, 2013 by Cexx Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1964096 Share on other sites More sharing options...
Shaneee Posted November 5, 2013 Share Posted November 5, 2013 How do I find which kext for my chipset nForce 630a ??? In 10.5.6 i use AppleNForceATA.kext and all work fine Edit: And when i find the kext i will put it in E/E on installation USB ? Here is the NForceATA kext I have used since SL. Install it to System/Library/Extensions not Extra. AppleNForceATA.kext.zip 1 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1964117 Share on other sites More sharing options...
Cexx Posted November 5, 2013 Share Posted November 5, 2013 Here is the NForceATA kext I have used since SL. Install it to System/Library/Extensions not Extra. AppleNForceATA.kext.zip Finally the Disk Utility show my HDD, thank you so much, who knows how much more time spent trying to show it. I love you, man Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1964159 Share on other sites More sharing options...
Shaneee Posted November 5, 2013 Share Posted November 5, 2013 Finally the Disk Utility show my HDD, thank you so much, who knows how much more time spent trying to show it. I love you, man Nice pic lol No problem I'm just here to help 1 Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1964165 Share on other sites More sharing options...
Cexx Posted November 5, 2013 Share Posted November 5, 2013 Now after installation i get "Still waiting for root device" error. What now ? Go in singel user mode and copy the AppleNForceATA.kext to S/L/E or try something else ? Link to comment https://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page/65/#findComment-1964214 Share on other sites More sharing options...
Recommended Posts