Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30960 posts in this topic

Recommended Posts

Jief_Machak
Jief_Machak
Posted
Posted
22 minutes ago, Common_Sense said:

OC can boot from main macOS partition as well

I don't think that's true. I have to double-check, but I think OC boot only on Preboot. You just don't know it.

 

22 minutes ago, Slice said:

May be set in config.plist something like Boot->AlwaysPreboot=YES/NO ?

Boot on main is not supported and doesn't work anymore. Probably some hard coding in boot.efi. Let just disabled it for BS. We'll leave as it was for previous version.

  • Like 3
jsl2000
jsl2000
Posted
Posted
19 hours ago, Shaneee said:

In theory copying the OC patches into a Clover config should work but I've not had any success. "Base" becomes "Procedure" and the rest are self explanatory but it always fails to start booting. 

 

OC Patch: 


			<dict>
				<key>Arch</key>
				<string>x86_64</string>
				<key>Base</key>
				<string>_cpu_topology_sort</string>
				<key>Comment</key>
				<string>algrey - cpu_topology_sort -disable _x86_validate_topology</string>
				<key>Count</key>
				<integer>1</integer>
				<key>Enabled</key>
				<true/>
				<key>Find</key>
				<data>
				6AAA//8=
				</data>
				<key>Identifier</key>
				<string>kernel</string>
				<key>Limit</key>
				<integer>0</integer>
				<key>Mask</key>
				<data>
				/wAA//8=
				</data>
				<key>MaxKernel</key>
				<string>20.99.99</string>
				<key>MinKernel</key>
				<string>17.0.0</string>
				<key>Replace</key>
				<data>
				Dx9EAAA=
				</data>
				<key>ReplaceMask</key>
				<data>
				</data>
				<key>Skip</key>
				<integer>0</integer>
			</dict>

Clover Version: 


			<dict>
				<key>Find</key>
				<data>6AAA//8=</data>
				<key>MaskFind</key>
				<data>/wAA//8=</data>
				<key>Replace</key>
				<data>Dx9EAAA=</data>
				<key>Disabled</key>
				<false/>
				<key>Comment</key>
				<string>algrey - cpu_topology_sort -disable _x86_validate_topology</string>
				<key>Procedure</key>
				<string>_cpu_topology_sort</string>
			</dict>

 

I found something maybe cause failed to boot Big Sur in my Ryzen 1700X hackintosh.

The following patches can boot Catalina 10.15.7 and its log showed errors:

KernelToPatch-log.rtf

Screen Shot 2020-10-19 at 4.11.19 PM.png

naiclub
naiclub
Posted
Posted
2 hours ago, Jief_Machak said:

I will very soon update Clover to show Preboot and NOT main partitions for BigSur.

Make sure you didn't force hide Preboot in config.plist.

No, I never hide, preboot. Because I think I will definitely need it in the future, there is no need to hide.

Vinicius P. Miranda
Vinicius P. Miranda
Posted
Posted (edited)

Hello Guys,

Do you know how to solve this error?
I am days trying to install BS Beta 9 through the flashdrive but I always stop at this error. I've tried OpenCore 0.6.1 and 0.6.2 not work, now I'm trying from clover r5123 to r5125.
Does anyone know what I need to modify in Clover to get through?

Note 1: I already tried with FakeSMC instead of VirtualSMC. I've tried copying the Quircs from sample.plist without modifying. I modified the Quircs like a Sanity Checker. I always stuck in the same place.

Note 2: My debug.log is always getting empty. I do not know what happened.

Note 3: I have Catalina working well.

My EFI: EFI Vinicius P. Miranda.zip

MB: Rampage IV Extreme x79
CPU: Intel i7 3930k Sandy Bridge-E

 

IMG_0149.thumb.jpeg.5053e893c3a7cb4e822641f77b4b007f.jpeg

Edited by Vinicius P. Miranda
Common_Sense
Common_Sense
Posted
Posted
40 minutes ago, Jief_Machak said:

I don't think that's true. I have to double-check, but I think OC boot only on Preboot. You just don't know it.

 

Boot on main is not supported and doesn't work anymore. Probably some hard coding in boot.efi. Let just disabled it for BS. We'll leave as it was for previous version.

 

Oh, it might of course be that it boots pre-boot behind the scenes, I wouldn't notice any difference, didn't mean to sound arrogant :blush:

  • Thanks 1
jsl2000
jsl2000
Posted
Posted
38 minutes ago, SavageAUS said:

I can't remember who asked but ill post here anyway.

This is my EFI for Catalina on my X570 AMD Ryzen 5 3600.

 

Clover-Cat.zip

Please test my converted new patch which maybe working for you at Big Sur too.

17h-new-clover.plist

  • Like 1
  • Thanks 1
mhaeuser
mhaeuser
Posted
Posted
1 hour ago, Common_Sense said:

 

Oh, it might of course be that it boots pre-boot behind the scenes, I wouldn't notice any difference, didn't mean to sound arrogant :blush:

It's Preboot, APFS never supported main partition boot (I heard Apple does this under special circumstances, but never saw any proof), i.e. you may or may not be lucky. Both Startup Disk and bless hide the Preboot situation, it's an implementation detail not relevant to the (Mac) user

naiclub
naiclub
Posted
Posted
28 minutes ago, Download-Fritz said:

It's Preboot, APFS never supported main partition boot (I heard Apple does this under special circumstances, but never saw any proof), i.e. you may or may not be lucky. Both Startup Disk and bless hide the Preboot situation, it's an implementation detail not relevant to the (Mac) user

Yes, I think it is. It's Preboot, APFS. I can feel it. I tried Partition Harddisk Guide Format, it could not be installed. Only APFS format is required to install successfully.

iCanaro
iCanaro
Posted
Posted
40 minutes ago, jsl2000 said:

Please test my converted new patch which maybe working for you at Big Sur too.

17h-new-clover.plist

 

tested fully functional on mojave and catalina 
big sur, however, does not even start; my idea is that as soon as they fix the MatchOS then it will work properly

Also, continue the work, I came up with the idea (to be verified well) that Limit corresponds to Clover's RangeFind

  • Like 2
  • Haha 1
SavageAUS
SavageAUS
Posted
Posted (edited)
2 hours ago, iCanaro said:

if you want to try, on my X570 they work

config-CATA_MOJ_26.plist.zip - not tested

config-CATA_BS_38.plist.zip - boots Catalina & Big Sur to a point - see picture. 

config-CATA_BS_29.plist.zip - not tested - next test  

 

 

Spoiler

image.jpg


EDIT- I left it on the above screen longer and it finally booted big sur!

Also WiFi is not working.

with Clover 5125. I just need to work out what’s causing all the audio text and the BYS3 stall.

Simple NVRAM reset fixed the above and boots fast!

@iCanaro TYVM! @Jief_Machak & @Slice Great work to bring us AMD users into the Clover world.

 

Nothing on my config changed except for the quoted patches (config-CATA_BS_38.plist.zip)

 

Spoiler

1618595552_ScreenShot2020-10-19at10_04_47pm.thumb.png.b66935a839a4f9c72bd8614669a1fe30.png

 

Edited by SavageAUS
It booted!!
  • Like 2
jlrycm
jlrycm
Posted
Posted
2 hours ago, Download-Fritz said:

It's Preboot, APFS never supported main partition boot (I heard Apple does this under special circumstances, but never saw any proof), i.e. you may or may not be lucky. Both Startup Disk and bless hide the Preboot situation, it's an implementation detail not relevant to the (Mac) user

@Download-Fritz , @naiclub: Prior to beta 10, I tested booting my build (haswell GA-Z97-HD3) in BS using clover 5123, selecting in clover GUI the Big Sur partition (Preboot was hidden) and it worked well. I configured it based on an EFI posted by a colleague (the build was a Z87) in the pre-release Big Sur thread. And he also posted his working clover EFI under beta 10 but I haven’t updated mine to see if I can boot from main partition. Maybe not being able to boot from main partition is affecting some systems. In my case, it appears that Apple changed something in beta 10 and I did not figure out right way what is now precluding me from booting beta10 through clover 5125 selecting the Main partition instead of Preboot which is the case now.  Any thoughts about that?

  • Like 1
Matgen84
Matgen84
Posted
Posted

@Slice @Jief_Machak

I confirm what @jlrycm say: even r5125 latest commit can boot no more the main partition. It was  possible on Beta 9. Now,  Preboot is mandatory to boot Big Sur as @Download-Fritz wrote. 

  • Like 1
Jief_Machak
Jief_Machak
Posted
Posted

@everyone. As far as I know, there is NO special processing when it's a main partition or not. For Clover it's just a partition that contains an .efi, so let's boot it.

Nothing is made in Clover to make a main partition bootable or not. That's why I said that it was an Apple change. No commit, either old ones or new ones will change that.

But I'm doing now is to hide main BS partition. That's all.

  • Like 3
  • Thanks 2
kushwavez
kushwavez
Posted
Posted
2 minutes ago, Jief_Machak said:

@everyone. As far as I know, there is NO special processing when it's a main partition or not. For Clover it's just a partition that contains an .efi, so let's boot it.

Nothing is made in Clover to make a main partition bootable or not. That's why I said that it was an Apple change. No commit, either old ones or new ones will change that.

But I'm doing now is to hide main BS partition. That's all.

Exactly.

naiclub
naiclub
Posted
Posted
2 hours ago, Download-Fritz said:

@jlrycm Please read what you quoted. Booting the main partition is not supported. If it worked before, nice that you had luck, but if now it doesn't, Apple does and will not care.

For example, in Catalina, I first installed the preboot which was to appear after the file copy process successfully.

From mojave to Bigsur, I have seen that pre-boot process all over again because I used opencore a while ago. Before coming to Clover

  • Thanks 1
PG7
PG7
Posted
Posted
1 hour ago, Jief_Machak said:

Voici une version qui corrige MatchOS :  CloverX64-2020-10-19-19-09-31-2d124e4-dirty-jief.zip 

Faites-moi savoir si cela fonctionne, alors je l'engagerai.

 

boot with the latest CloverX64-2020-10-19-19-09-31-2d124e4-dirty-jief OK loads the DSDT here on my HP Envy Recline where I tested it has some points that are still not 100%

1 - with this file it takes more time to enter the graphical interface Clover!

2 - attempt to install Beta 10 is in gray screen with the mouse pointer is just that

3 - installation of the betas all until 9 I can pass the first phase, restart and in the second phase at the time that there should be the 29 minute discount, it just restarts and always stays on it without showing any kernel panic, the same happens with OpenCore!

 

Thanks for the work

 

google translate ! 

Spoiler

1191935163_Capturedecran2020-10-19a19_29_22.thumb.png.c793c7b4632ba73cdcb4c8b65668b05f.png1701278924_Capturedecran2020-10-19a19_29_14.thumb.png.703752f17d4667196359dd4185069068.png

 

debug.log

  • Like 2
 Share
Go to topic listing
×
×
  • Create New...