Jump to content

Clover General discussion

ErmaC

By ErmaC,
in Clover

 Share
30960 posts in this topic

Recommended Posts

newuser
newuser
Posted
Posted (edited)
9 hours ago, arsradu said:

Can you remove your serials from SMBIOS and RTvariables and upload your entire EFI folder for analysis?

Removed serial like you asked. Here you go. Thank you very much for your input!

EFI.7z

 

Edited by newuser
double quote
arsradu
arsradu
Posted
Posted (edited)
22 minutes ago, newuser said:

Removed serial like you asked. Here you go. Thank you very much for your input!

EFI.7z

 

 

You've got drivers in both drivers64 and drivers64UEFI folders. Since this is a UEFI installation, I'm pretty sure you don't need the drivers64 folder. But you might wanna salvage HFSPlus.efi and apfs.efi from there and have them somewhere safe, in case you need them. Or you could just move the entire folder somewhere on your Desktop, for now.

 

Also, you've got quite a lot of patched DSDT/SSDT. Hope they won't interfere with anything.

 

Anyway, this would be my first guess. Try to move/remove the drivers64 folder and see if it makes a difference for you.

Edited by arsradu
newuser
newuser
Posted
Posted (edited)

 

12 minutes ago, arsradu said:

 

You've got drivers in both drivers64 and drivers64UEFI. Since, this is a UEFI installation, I'm pretty sure you don't need the drivers64 folder. But you might wanna salvage HFSPlus.efi and apfs.efi from there and have them somewhere safe, in case you need them. Or you could just move the entire folder somewhere on your Desktop, for now. I'd say the rest of the files in that folder might already be present in drivers64UEFI. But if you wanna take a second look, that would probably be best.

 

Also, you've got quite a lot of patched DSDT/SSDT. Hope they won't interfere with anything.

 

Anyway, this would be my first guess. Try to move/remove the drivers64 folder and see if it makes a difference for you.

Removed drivers64 and no difference. HFSPlus.efi never worked for me from the beginning I am using vboxhfs-64.efi instead.

Edited by newuser
arsradu
arsradu
Posted
Posted
8 minutes ago, newuser said:

 

Removed drivers64 and no difference. HFSPlus.efi never worked for me from the beginning I am using vboxhfs-64.efi instead.

 

Ok, so to resume.

With apfs/apfsdriverloader in drivers64UEFI, you can boot MacOS but you can't boot Windows
Without them, you can only boot Windows (which I'd say is intended, since MacOS requires APFS).

 

So, the only question here is why can't you boot Windows anymore when you add apfsdriverloader to drivers64UEFI. Did you change anything else? Does it work with older Clover versions...? Not too old, though. Maybe a boot log could help here...? I don't know.

 

I don't use Windows anymore, so can't really tell... Maybe people with more experience in that will have a better idea what's going on in this case. 

 

Is Windows installed on a separate partition on the same drive or a separate drive altogether? 

newuser
newuser
Posted
Posted
1 minute ago, arsradu said:

 

Ok, so to resume.

With apfs/apfsdriverloader in drivers64UEFI, you can boot MacOS but you can't boot Windows
Without them, you can only boot Windows (which I'd say is intended, since MacOS requires APFS).

 

So, the only question here is why can't you boot Windows anymore when you add apfsdriverloader to drivers64UEFI. Did you change anything else? Does it work with older Clover versions...? Not too old, though. Maybe a boot log could help here...? I don't know.

 

I don't use Windows anymore, so can't really tell... Maybe people with more experience in that will have a better idea what's going on in this case. 

 

Is Windows installed on a separate partition on the same drive or a separate drive altogether? 

I can't boot to MacOS at all because clover wont boot at all with apfs/apfsdriverloader in drivers64UEFI. I don't use Windows as well but now that is the only way I can access EFI partition and mac files and do some changes. I've tried older Clover version but no luck. How to access boot.log? Windows is installed on separate partition.

arsradu
arsradu
Posted
Posted (edited)
14 minutes ago, newuser said:

I can't boot to MacOS at all because clover wont boot at all with apfs/apfsdriverloader in drivers64UEFI. I don't use Windows as well but now that is the only way I can access EFI partition and mac files and do some changes. I've tried older Clover version but no luck. How to access boot.log? Windows is installed on separate partition.

 

To generate a preboot.log, on Clover boot UI, press F2. The resulting file should be stored in EFI/CLOVER/misc.

 

Also, do you think it would be possible to boot without patched DSDTs for testing (move them somewhere for now)? I'm afraid that might affect MacOS boot. Not sure about Windows boot though. But...personally I'd start with a clean config with MINIMUM patches, no patched SSDT/DSDT.  Kinda hard to debug when you're having so many points of failure.

Edited by arsradu
newuser
newuser
Posted
Posted
58 minutes ago, arsradu said:

 

To generate a preboot.log, on Clover boot UI, press F2. The resulting file should be stored in EFI/CLOVER/misc.

 

Also, do you think it would be possible to boot without patched DSDTs for testing (move them somewhere for now)? I'm afraid that might affect MacOS boot. Not sure about Windows boot though. But...personally I'd start with a clean config with MINIMUM patches, no patched SSDT/DSDT.  Kinda hard to debug when you're having so many points of failure.

To get to Clover UI boot I had to removed apfsdriverloader.efi from drivers64UEFI. This is the only way for me to load Clover now. Boot tested with moved DSDT patched + apfs.efi (from installer) /apfsdriverloader.efi different folder still clover. I can start Windows either through UEFIbios or clover, but only without APF / apfsdriverloader. Please check my proboot.log.

Quote

0:100  0:100  MemLog inited, TSC freq: 2194919694
0:100  0:000  CPU was calibrated with ACPI PM Timer
0:100  0:000  
0:100  0:000  Now is 19.7.2018,  12:25:52 (GMT)
0:100  0:000  Starting Clover revision: 4586 on American Megatrends EFI
0:100  0:000  Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.13.5 | XCODE: 9.4.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800) @C7CA5C98
0:100  0:000  SelfDirPath = \EFI\CLOVER
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Type 16 Index = 0
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device =  DIMM A
0:100  0:000  SmbiosTable.Type17->Vendor = Elpida
0:100  0:000  SmbiosTable.Type17->SerialNumber = 81808080
0:100  0:000  SmbiosTable.Type17->PartNumber = 8KTS51264HDZ-1G6E1
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1600MHz
0:100  0:000  SmbiosTable.Type17->Size = 4096MB
0:100  0:000  SmbiosTable.Type17->Bank/Device =  DIMM B
0:100  0:000  SmbiosTable.Type17->Vendor = Elpida
0:100  0:000  SmbiosTable.Type17->SerialNumber = 82808080
0:100  0:000  SmbiosTable.Type17->PartNumber = 8KTS51264HDZ-1G6E1
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'XPS 13 9343' with board '0TM99H'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=306D4
0:100  0:000   The CPU supported SSE4.1
0:100  0:000  BrandString = Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz
0:100  0:000   The CPU supported turbo
0:100  0:000  MSR 0x35               20004
0:100  0:000  MSR 0xE2 before patch 1E008408
0:100  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:100  0:000  MSR 0xCE              0005053B_F3011600
0:100  0:000  corrected FLEX_RATIO = 0
0:100  0:000  MSR 0x1B0             00000000
0:100  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:100  0:000  MaxDiv/MinDiv: 22.0/5
0:100  0:000  Turbo: 25/25/25/27
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 2
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 2200 MHz
0:100  0:000  TSC: 2200 MHz
0:100  0:000  PIS: 100 MHz
0:100  0:000  ExternalClock: 25 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 1604 class=060000
0:100  0:000  PCI (00|00:02.00) : 8086 1616 class=030000
0:100  0:000   - GFX: Model=Intel HD Graphics 5500 (Intel)
0:100  0:000  PCI (00|00:03.00) : 8086 160C class=040300
0:100  0:000  PCI (00|00:04.00) : 8086 1603 class=118000
0:100  0:000  PCI (00|00:14.00) : 8086 9CB1 class=0C0330
0:100  0:000  PCI (00|00:16.00) : 8086 9CBA class=078000
0:100  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1C.00) : 8086 9C90 class=060400
0:100  0:000  PCI (00|01:00.00) : FFFF FFFF class=FFFFFF
0:100  0:000  PCI (00|00:1C.03) : 8086 9C96 class=060400
0:100  0:000  PCI (00|02:00.00) : 14E4 43B1 class=028000
0:100  0:000   - WIFI: Vendor=Broadcom
0:100  0:000  PCI (00|00:1F.00) : 8086 9CC3 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 9C83 class=010601
0:100  0:000  PCI (00|00:1F.03) : 8086 9CA2 class=0C0500
0:100  0:000  PCI (00|00:1F.06) : 8086 9CA4 class=118000
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 186 bytes
0:101  0:000  EFI\CLOVER\.plist not loaded with name from LoadOptions: Invalid Parameter
0:104  0:003  EFI\CLOVER\config.plist loaded: Success
0:104  0:000  === [ GetListOfThemes ] ===================================
0:105  0:001  - [00]: applestyle
0:106  0:000  === [ Found config plists ] ===============================
0:108  0:002  - config.plist
0:108  0:000  === [ GetEarlyUserSettings ] ==============================
0:108  0:000  timeout set to 5
0:108  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:108  0:000  KextsToPatch: 7 requested
0:108  0:000   - [00]: com.apple.driver.AirPort.Brcm4360 (AirPortBrcm4360 - fcvo) :: BinPatch :: data len: 8
0:108  0:000   - [01]: AppleIntelBDWGraphicsFramebuffer (NoLabel) - invalid Find/Replace data - skipping!
0:108  0:000   - [02]: AppleIntelBDWGraphicsFramebuffer  (Siera Grafika) - invalid Find/Replace data - skipping!
0:108  0:000   - [03]: IOBluetoothFamily (BT 10.11) :: BinPatch :: data len: 8
0:108  0:000   - [04]: IOGraphicsFamily (Boot Graphics Glitch) - invalid Find/Replace data - skipping!
0:108  0:000   - [05]: disabled:IOAHCIBlockStorage (Enable TRIM for SSD) :: BinPatch :: data len: 11
0:108  0:000   - [06]: com.apple.driver.AppleBacklight (change F%uT%04x to F%uTxxxx in AppleBacklightInjector.kext (credit RehabMan)) :: BinPatch :: data len: 9
0:108  0:000  Default theme: applestyle
0:108  0:000  Hiding entries with string 4E87B4A3-A361-4F60-ABED-16402B76870D
0:108  0:000  Hiding entries with string 18EC9078-280E-4F93-9A8F-82B2A593FE0C
0:108  0:000  Hiding entries with string E9C31A5A-16C3-4DF7-9EFB-AAD940997859
0:108  0:000  Hiding entries with string D20D6622-3063-422A-9518-D87945EB045C
0:108  0:000  === [ LoadDrivers ] =======================================
0:110  0:001  Loading AppleImageCodec-64.efi  status=Success
0:114  0:003  Loading AppleKeyAggregator-64.efi  status=Success
0:115  0:001  Loading AppleUITheme-64.efi  status=Success
0:116  0:001  Loading DataHubDxe-64.efi  status=Success
0:127  0:010  Loading FirmwareVolume-64.efi  status=Success
0:128  0:001  Loading FSInject-64.efi  status=Success
0:130  0:002  Loading OsxAptioFixDrv-64.efi  status=Success
0:132  0:001  Loading SMCHelper-64.efi  status=Success
0:133  0:001  Loading VBoxHfs-64.efi  status=Success
0:135  0:001   - driver needs connecting
0:135  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:137  0:002  1 drivers needs connecting ...
0:137  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:137  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:460  0:323  === [ InitScreen ] ========================================
0:460  0:000  SetMaxResolution: found best mode 6: 3200x1800
0:460  0:000   - already set
0:460  0:000  Console modes reported: 4, available modes:
0:460  0:000   - [01]: 80x25
0:460  0:000   - [02]: 80x50
0:460  0:000   - [03]: 100x31
0:460  0:000   - [04]: 400x94 (current mode)
0:460  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
0:461  0:000  Using embedded font: Success
0:462  0:001  === [ GetMacAddress ] =====================================
0:462  0:000  === [ ScanSPD ] ===========================================
0:462  0:000  SMBus device : 8086 9CA2 class=0C0500 status=Success
0:462  0:000  SMBus CmdReg: 0x3
0:462  0:000  Scanning SMBus [8086:9CA2], mmio: 0xF741D004, ioport: 0xF040, hostc: 0x11
0:462  0:000  Slots to scan [8]...
0:463  0:001  === [ GetAcpiTablesList ] =================================
0:463  0:000  Get Acpi Tables List from RSDT:
0:463  0:000   - [00]: FACP  CBX3    len=132
0:463  0:000   - [01]: APIC  CBX3    len=132
0:463  0:000   - [02]: FPDT  CBX3    len=68
0:463  0:000   - [03]: FIDT  CBX3    len=156
0:463  0:000   - [04]: MCFG  CBX3    len=60
0:463  0:000   - [05]: HPET  CBX3    len=56
0:463  0:000   - [06]: SSDT  SataTabl len=1109
0:463  0:000   - [07]: UEFI   len=66
0:463  0:000   - [08]: SSDT  Tpm2Tabl len=1191
0:463  0:000   - [09]: SSDT  MeSsdt  len=75
0:464  0:000   - [10]: TPM2   len=52
0:464  0:000   - [11]: SSDT  Ther_Rvp len=3291
0:464  0:000   - [12]: ASF!   HCG len=160
0:464  0:000   - [13]: SSDT  Cpu0Ist len=1311
0:464  0:000   - [14]: SSDT  CpuSsdt len=2932
0:464  0:000   - [15]: SSDT  LakeTiny len=455
0:464  0:000   - [16]: SSDT  CppcTabl len=933
0:464  0:000   - [17]: PCCT  PcctTabl len=110
0:464  0:000   - [18]: SSDT  Cpc_Tabl len=2756
0:464  0:000   - [19]: SSDT  SaSsdt  len=16903
0:464  0:000   - [20]: SSDT  DptfTabl len=17990
0:464  0:000   - [21]: SLIC  CBX3    len=374
0:464  0:000   - [22]: MSDM  CBX3    len=85
0:464  0:000   - [23]: CSRT  BDW-ULT len=196
0:464  0:000   - [24]: BGRT   len=56
0:464  0:000  Calibrated TSC Frequency = 2194919694 = 2194MHz
0:464  0:000  === [ GetUserSettings ] ===================================
0:464  0:000  USB FixOwnership: no
0:464  0:000  Dropping 7 tables:
0:464  0:000   - [00]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Cst" (0074734330757043)
0:464  0:000           - set table: 54445353,   74734330757043 to drop: no
0:464  0:000   - [01]: Drop table  signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
0:464  0:000           - set table: 54445353,       6D50757043 to drop: no
0:464  0:000   - [02]: Drop table  signature="DMAR" (52414D44)
0:464  0:000           - set table: 52414D44,                0 to drop: no
0:464  0:000   - [03]: Drop table  signature="SSDT" (54445353) table-id="ApCst" (0000007473437041)
0:464  0:000           - set table: 54445353,       7473437041 to drop: no
0:464  0:000   - [04]: Drop table  signature="SSDT" (54445353) table-id="ApIst" (0000007473497041)
0:464  0:000           - set table: 54445353,       7473497041 to drop: no
0:464  0:000   - [05]: Drop table  signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
0:464  0:000           - set table: 54445353,   74734930757043 to drop: yes
0:464  0:000   - [06]: Drop table  signature="MATS" (5354414D)
0:464  0:000           - set table: 5354414D,                0 to drop: no
0:464  0:000   - final DSDT Fix mask=00000004
0:464  0:000  PluginType: 1
0:464  0:000  Using ProductName from config: MacBookPro12,1
0:464  0:000  Using latest BiosVersion from clover
0:464  0:000  BiosVersion: MBP121.88Z.0176.B00.1804091715
0:464  0:000  BiosReleaseDate: 04/09/2018
0:464  0:000  Using FirmwareFeatures from config: 0xFC0FE136
0:464  0:000  Using FirmwareFeaturesMask from config: 0xFF1FFF3F
0:464  0:000  Board-ID set from config as Mac-E43C1C25D4880AD6
0:464  0:000  BoardType: 0xA
0:464  0:000  ChassisType: 0x9
0:468  0:003  === [ Found DSDT tables ] =================================
0:469  0:000  - DSDT.aml
0:514  0:045  === [ ScanVolumes ] =======================================
0:514  0:000  Found 6 volumes with blockIO
0:514  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
0:515  0:000          Result of bootcode detection: bootable unknown (legacy)
0:515  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
0:515  0:000          Result of bootcode detection: bootable unknown (legacy)
0:515  0:000          This is SelfVolume !!
0:515  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
0:516  0:000          hiding this volume
0:516  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
0:517  0:000          Result of bootcode detection: bootable Windows (vista,win)
0:517  0:000          hiding this volume
0:517  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
0:517  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
0:518  0:000          Result of bootcode detection: bootable unknown (legacy)
0:518  0:000  === [ InitTheme ] =========================================
0:520  0:002  Using theme 'applestyle' (EFI\CLOVER\themes\applestyle)
0:523  0:002  Loading font from ThemeDir: Success
0:523  0:000  Chosen theme applestyle
0:523  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
0:523  0:000  === [ Dump SMC keys from NVRAM ] ==========================
0:523  0:000  found AppleSMC protocol
0:533  0:010  Registered 17 SMC keys
0:534  0:000  === [ ScanLoader ] ========================================
0:534  0:000  - [01]: 'EFI'
0:535  0:001          AddLoaderEntry for Volume Name=EFI
0:549  0:013          AddLoaderEntry for Volume Name=EFI
0:549  0:000          skipped because entry is hidden
0:549  0:000  - [03]: 'OS', hidden
0:549  0:000  Scanning legacy ...
0:549  0:000   3: 'OS' (vista,win) hidden
0:549  0:000  === [ AddCustomTool ] =====================================
0:550  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:550  0:000  Checking EFI partition Volume 1 for Clover
0:550  0:000   Found Clover
0:551  0:001  === [ GetEfiBootDeviceFromNvram ] =========================
0:551  0:000  Default boot entry not found
0:551  0:000  DefaultIndex=-1 and MainMenu.EntryCount=7
1:427  0:875  GUI ready
15:458  14:031  ReinitSelfLib after theme change
15:458  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
15:458  0:000  === [ ScanVolumes ] =======================================
15:458  0:000  Found 6 volumes with blockIO
15:458  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
15:461  0:003          Result of bootcode detection: bootable unknown (legacy)
15:461  0:000          This is SelfVolume !!
15:461  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
15:462  0:000          Result of bootcode detection: bootable unknown (legacy)
15:462  0:000          This is SelfVolume !!
15:462  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
15:462  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
15:463  0:000          Result of bootcode detection: bootable Windows (vista,win)
15:463  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
15:464  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
15:464  0:000          Result of bootcode detection: bootable unknown (legacy)
15:464  0:000  Chosen theme applestyle
15:464  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
15:464  0:000  === [ ScanLoader ] ========================================
15:464  0:000  - [01]: 'EFI'
15:465  0:000          AddLoaderEntry for Volume Name=EFI
15:474  0:009          AddLoaderEntry for Volume Name=EFI
15:475  0:001  - [03]: 'OS'
15:484  0:008  Scanning legacy ...
15:484  0:000   3: 'OS' (vista,win) add legacy
15:484  0:000   added 'Boot Windows from OS' OSType=2 Icon=vista,win
15:484  0:000  === [ AddCustomTool ] =====================================
15:484  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
15:484  0:000  Checking EFI partition Volume 1 for Clover
15:484  0:000   Found Clover
15:484  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
15:485  0:000  Default boot entry not found
15:485  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
16:305  0:820  ReinitSelfLib after theme change
16:305  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
16:306  0:000  === [ ScanVolumes ] =======================================
16:306  0:000  Found 6 volumes with blockIO
16:306  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
16:309  0:003          Result of bootcode detection: bootable unknown (legacy)
16:309  0:000          This is SelfVolume !!
16:309  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
16:309  0:000          Result of bootcode detection: bootable unknown (legacy)
16:310  0:000          This is SelfVolume !!
16:310  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
16:310  0:000          hiding this volume
16:310  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
16:311  0:000          Result of bootcode detection: bootable Windows (vista,win)
16:311  0:000          hiding this volume
16:311  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
16:312  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
16:312  0:000          Result of bootcode detection: bootable unknown (legacy)
16:312  0:000  Chosen theme applestyle
16:312  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
16:312  0:000  === [ ScanLoader ] ========================================
16:312  0:000  - [01]: 'EFI'
16:313  0:000          AddLoaderEntry for Volume Name=EFI
16:322  0:009          AddLoaderEntry for Volume Name=EFI
16:322  0:000          skipped because entry is hidden
16:322  0:000  - [03]: 'OS', hidden
16:322  0:000  Scanning legacy ...
16:322  0:000   3: 'OS' (vista,win) hidden
16:322  0:000  === [ AddCustomTool ] =====================================
16:322  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
16:322  0:000  Checking EFI partition Volume 1 for Clover
16:322  0:000   Found Clover
16:322  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
16:322  0:000  Default boot entry not found
16:322  0:000  DefaultIndex=-1 and MainMenu.EntryCount=7
17:140  0:818  ReinitSelfLib after theme change
17:140  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
17:140  0:000  === [ ScanVolumes ] =======================================
17:140  0:000  Found 6 volumes with blockIO
17:140  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
17:143  0:003          Result of bootcode detection: bootable unknown (legacy)
17:143  0:000          This is SelfVolume !!
17:143  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
17:144  0:000          Result of bootcode detection: bootable unknown (legacy)
17:145  0:000          This is SelfVolume !!
17:145  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
17:145  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
17:146  0:000          Result of bootcode detection: bootable Windows (vista,win)
17:146  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
17:146  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
17:147  0:000          Result of bootcode detection: bootable unknown (legacy)
17:147  0:000  Chosen theme applestyle
17:147  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
17:147  0:000  === [ ScanLoader ] ========================================
17:147  0:000  - [01]: 'EFI'
17:148  0:000          AddLoaderEntry for Volume Name=EFI
17:157  0:009          AddLoaderEntry for Volume Name=EFI
17:157  0:000  - [03]: 'OS'
17:166  0:008  Scanning legacy ...
17:166  0:000   3: 'OS' (vista,win) add legacy
17:166  0:000   added 'Boot Windows from OS' OSType=2 Icon=vista,win
17:166  0:000  === [ AddCustomTool ] =====================================
17:166  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
17:166  0:000  Checking EFI partition Volume 1 for Clover
17:166  0:000   Found Clover
17:167  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
17:167  0:000  Default boot entry not found
17:167  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
17:988  0:820  ReinitSelfLib after theme change
17:988  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
17:988  0:000  === [ ScanVolumes ] =======================================
17:988  0:000  Found 6 volumes with blockIO
17:988  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
17:991  0:003          Result of bootcode detection: bootable unknown (legacy)
17:991  0:000          This is SelfVolume !!
17:991  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
17:991  0:000          Result of bootcode detection: bootable unknown (legacy)
17:992  0:000          This is SelfVolume !!
17:992  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
17:993  0:000          hiding this volume
17:993  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
17:993  0:000          Result of bootcode detection: bootable Windows (vista,win)
17:993  0:000          hiding this volume
17:993  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
17:994  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
17:994  0:000          Result of bootcode detection: bootable unknown (legacy)
17:994  0:000  Chosen theme applestyle
17:995  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
17:995  0:000  === [ ScanLoader ] ========================================
17:995  0:000  - [01]: 'EFI'
17:995  0:000          AddLoaderEntry for Volume Name=EFI
18:004  0:009          AddLoaderEntry for Volume Name=EFI
18:004  0:000          skipped because entry is hidden
18:004  0:000  - [03]: 'OS', hidden
18:004  0:000  Scanning legacy ...
18:004  0:000   3: 'OS' (vista,win) hidden
18:004  0:000  === [ AddCustomTool ] =====================================
18:004  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
18:004  0:000  Checking EFI partition Volume 1 for Clover
18:004  0:000   Found Clover
18:005  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
18:005  0:000  Default boot entry not found
18:005  0:000  DefaultIndex=-1 and MainMenu.EntryCount=7
20:549  2:544  ReinitSelfLib after theme change
20:549  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
20:549  0:000  === [ ScanVolumes ] =======================================
20:549  0:000  Found 6 volumes with blockIO
20:549  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
20:552  0:003          Result of bootcode detection: bootable unknown (legacy)
20:552  0:000          This is SelfVolume !!
20:552  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
20:553  0:000          Result of bootcode detection: bootable unknown (legacy)
20:553  0:000          This is SelfVolume !!
20:553  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
20:554  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
20:554  0:000          Result of bootcode detection: bootable Windows (vista,win)
20:554  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
20:555  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
20:555  0:000          Result of bootcode detection: bootable unknown (legacy)
20:556  0:000  Chosen theme applestyle
20:556  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
20:556  0:000  === [ ScanLoader ] ========================================
20:556  0:000  - [01]: 'EFI'
20:556  0:000          AddLoaderEntry for Volume Name=EFI
20:565  0:008          AddLoaderEntry for Volume Name=EFI
20:566  0:000  - [03]: 'OS'
20:574  0:008  Scanning legacy ...
20:574  0:000   3: 'OS' (vista,win) add legacy
20:575  0:000   added 'Boot Windows from OS' OSType=2 Icon=vista,win
20:575  0:000  === [ AddCustomTool ] =====================================
20:575  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
20:575  0:000  Checking EFI partition Volume 1 for Clover
20:575  0:000   Found Clover
20:575  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
20:575  0:000  Default boot entry not found
20:575  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
37:229  16:653  ReinitSelfLib after theme change
37:229  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
37:229  0:000  === [ ScanVolumes ] =======================================
37:229  0:000  Found 6 volumes with blockIO
37:229  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)
37:232  0:003          Result of bootcode detection: bootable unknown (legacy)
37:232  0:000          This is SelfVolume !!
37:232  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(1,GPT,EEACE0E5-99C9-4BFE-BE5E-6BBB514023B8,0x800,0xF9800)
37:232  0:000          Result of bootcode detection: bootable unknown (legacy)
37:233  0:000          This is SelfVolume !!
37:233  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(2,GPT,D20D6622-3063-422A-9518-D87945EB045C,0xFA000,0x40000)
37:234  0:000          hiding this volume
37:234  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(3,GPT,E9C31A5A-16C3-4DF7-9EFB-AAD940997859,0x13A000,0x61A8000)
37:234  0:000          Result of bootcode detection: bootable Windows (vista,win)
37:234  0:000          hiding this volume
37:234  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(4,GPT,067EA57B-5D38-428C-9799-ECE7ADA28C13,0x62E2000,0x1388000)
37:235  0:000  - [05]: Volume: PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0xFFFF,0x0)\HD(5,GPT,3BE58E1A-34CF-4D6C-3455-68B2A39AD53C,0x766A000,0x16689288)
37:235  0:000          Result of bootcode detection: bootable unknown (legacy)
37:235  0:000  Chosen theme applestyle
37:235  0:000  after NVRAM boot-args=-v dart=0 nv_disable=1 kext-dev-mode=1
37:236  0:000  === [ ScanLoader ] ========================================
37:236  0:000  - [01]: 'EFI'
37:236  0:000          AddLoaderEntry for Volume Name=EFI
37:245  0:009          AddLoaderEntry for Volume Name=EFI
37:245  0:000          skipped because entry is hidden
37:245  0:000  - [03]: 'OS', hidden
37:245  0:000  Scanning legacy ...
37:245  0:000   3: 'OS' (vista,win) hidden
37:245  0:000  === [ AddCustomTool ] =====================================
37:245  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
37:245  0:000  Checking EFI partition Volume 1 for Clover
37:245  0:000   Found Clover
37:245  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
37:245  0:000  Default boot entry not found
37:245  0:000  DefaultIndex=-1 and MainMenu.EntryCount=7
41:870  4:624  BootVariable of the entry is empty
41:870  0:000  === [ StartLoader ] =======================================
41:870  0:000  Finally: ExternalClock=25MHz BusSpeed=99770kHz CPUFreq=2195MHz PIS: hw.busfrequency=100000000Hz
41:870  0:000  Loading bootmgfw.efi  status=Success
42:126  0:255  Closing events for Windows
42:126  0:000  OtherOS: Found Acpi 2.0 RSDP 0xD6E9B000
42:126  0:000  RSDT at D6E9B028
42:126  0:000  XSDT at D6E9B0B8
42:126  0:000  FADT pointer = D6EAE778
42:133  0:006  Cleanup RSDT: count=25, length=136
42:133  0:000  corrected RSDT: count=25, length=136
42:133  0:000  Cleanup XSDT: count=25, length=236
42:133  0:000  corrected XSDT count=25, length=236
42:133  0:000  Closing log
 

 

vector sigma
vector sigma
Posted
Posted

Please guys test the attached prefpanes.

 

@Slice I've ended up to correct the Clover PrefPane to a modern obj-c that use automatic reference counting, and I fixed some possible leaks. That after I see that the .xib file is no longer compilable with newer Xcode, and the best I can do is a compilation that require at least Xcode 5 (Mountain Lion?). The deployment target is 10.7 ...so snow is out.. 

Now I'm going to look at the CloverUpdater if needs update..

Clover.prefPane.zip

  • Like 1
arsradu
arsradu
Posted
Posted (edited)
1 hour ago, vector sigma said:

Please guys test the attached prefpanes.

 

@Slice I've ended up to correct the Clover PrefPane to a modern obj-c that use automatic reference counting, and I fixed some possible leaks. That after I see that the .xib file is no longer compilable with newer Xcode, and the best I can do is a compilation that require at least Xcode 5 (Mountain Lion?). The deployment target is 10.7 ...so snow is out.. 

Now I'm going to look at the CloverUpdater if needs update..

Clover.prefPane.zip

 

Seems to be working. Also, no more issues when building with this Clover.prefPane in Dark Mode. Thank you!

 

310632217_Screenshot2018-07-19at22_07_14.png.4c034cd899423502e035a5d5b63d48ea.png

 

Edited by arsradu
  • Thanks 1
Slice
Slice
Posted
Posted
14 hours ago, vector sigma said:

Please guys test the attached prefpanes.

 

@Slice I've ended up to correct the Clover PrefPane to a modern obj-c that use automatic reference counting, and I fixed some possible leaks. That after I see that the .xib file is no longer compilable with newer Xcode, and the best I can do is a compilation that require at least Xcode 5 (Mountain Lion?). The deployment target is 10.7 ...so snow is out.. 

Now I'm going to look at the CloverUpdater if needs update..

Clover.prefPane.zip

Snow users will use old prefpanel.

Glad to see you are working on this.

  • Like 2
vector sigma
vector sigma
Posted
Posted
8 minutes ago, Badruzeus said:

Clover PrefPane (r4614) is broken under OS X El Capitan 10.11.6.

Screenshot.png

#EDIT: Built with Xcode 8.2.1

Is called "Auto layout" introduced in 10.7 when all the views in the container have constraints that decide how to resize them. Building in mojave the same prefpane works without problem in El Capitan (tested here).. sign that is Xcode 8 to have problem. What I can do is to disable autolayout... this way the window will not fit entirely the new size in newer OSes in System Preferences.

  • Like 1
  • Thanks 1
vector sigma
vector sigma
Posted
Posted (edited)
7 minutes ago, chris1111 said:

and now this is the message on snow :P

I know is not working anymore on snow but message is weird

Capture.png.017a4be8076fc20f8f096e2c53f673c3.png

As already said. The deployment target is now 10.7. So why you updated it? wanted to see the error? Lol

Edited by vector sigma
  • Like 1
chris1111
chris1111
Posted
Posted
1 minute ago, vector sigma said:

As already said. The deployment target is now 10.7. So why you updated it?

I know is just test what append :lol:

I reput my old panel now and its work:angel_not:

  • Like 1
Badruzeus
Badruzeus
Posted
Posted
4 minutes ago, chris1111 said:

I reput my old panel now and its work:angel_not:

Not sure with "reput" here, did you mean rolling back from prev. rev?

BTW, I just rebuilt with 10.7 as macOS Deploy Target, but the Layout issue is still there.. 

vector sigma
vector sigma
Posted
Posted (edited)
19 hours ago, arsradu said:

 

New src folder. Start from scratch. Seems ok for CloverPrefPane... Not ok for CloverUpdater...yet. 

1008023089_Screenshot2018-07-19at23_19_00.png.c799f7c573d274f4996d6aad54ef3a8f.png

 

 

 

Not my fault I guess. You have to call make clean in CloverPackage before build it again. Try anyway latest revision (in 4615 I've added in the make file the clean of the build folder..was missing, so now Xcode can't reuse old xibs)

EDIT

didin't see you where talking about using a fresh source. Let me know if persist. (my build is 18A326h using Xcode 10 beta 4)

7 hours ago, Slice said:

Snow users will use old prefpanel.

Glad to see you are working on this.

Thanks. Unfortunately my days are full until the vacation in august :cry:

Edited by vector sigma
  • Thanks 1
vector sigma
vector sigma
Posted
Posted (edited)

About Snow Leopard. It's hard to remove errors or update old projects without having it, surely you know that newer Xcode ask to convert to a new format to allow you to work on. To give the possibility to build Clover's Applications with Xcode 5 had to work first with Xcode 10 and when I see all working had to go back in Sierra to use Xcode 9 and convert back the project to be usable with Xcode 8. Done the same thing, this time rebooting in Sierra to use Xcode 8... same again in El capitan using Xcode 7 to  make the project compatible with Xcode 5:blink:. I don't have more old OSes to try and see if we can go back further.. Snow anyway is really really old and no one (in fact) use it.. Not me saying that..use google. One of the most used old OS is Mavericks that was good (ML and Lion ..brrrr..). Anyway the Clover package should be compilable using Mountain Lion and Xcode 5, and be aware that I'm not talking about compiling Clover binaries that is another story.

 

Edited by vector sigma
some typos Lol
  • Like 1
chris1111
chris1111
Posted
Posted (edited)
6 minutes ago, vector sigma said:

About Snow Leopard. Its hard to remove errors or update old projects without having it, surely you know that newer Xcode ask to convert to a new format to allow you to work on. To give the possibility to build Clover's Applications with Xcode 5 had to work first with Xcode 10 and when I see all working had to go back in Sierra to use Xcode 8 and convert back the project to be usable with Xcode 7. Done the same thing, this time rebooting in El Capitan to use Xcode 7... and so make the project compatible with Xcode 5:blink:. I don't have more old OSes to try and see if we can go back further.. Snow anyway is really really old and no one (in fact) use it.. Not me saying that..use google. One of the most used old oses is Mavericks that was a good OS (ML and Lion ..brrrr..). Anyway the Clover package should be compilable using Mountain Lion and Xcode 5, and be aware that I'm talking about compiling Clover binaries that is another story.

Screenshot 1.png

Yes right

I am using Snow and Lion only for Fun and chalenge:D

some old app is really cool to using on both Os

Edited by chris1111
  • Like 1
Matgen84
Matgen84
Posted
Posted
28 minutes ago, vector sigma said:

Not my fault I guess. You have to call make clean in CloverPackage before build it again. Try anyway latest revision (in 4615 I've added in the make file the clean of the build folder..was missing, so now Xcode can't reuse old xibs)

Thanks. Unfortunately my days are full until the vacation in august :cry:

 

I test a clean src folder and I've same issue as @arsradu on Mojave/ Xcode 10. Build with UDK2018 script.

 

Thanks for your good job

 Share
Go to topic listing
×
×
  • Create New...