Sherlocks Posted November 1, 2017 Share Posted November 1, 2017 Why not use "Other" folder?I don't know. I can't see other folder in kext injection management. Only shown blank like 2nd pic above. I can't block any kexts. EDIT1. My laptop has only one SSD. Also ESP too. I also tested old clover version. I saw It read kext list. 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526709 Share on other sites More sharing options...
chris1111 Posted November 1, 2017 Share Posted November 1, 2017 If you have multiple OS Other is not a good choice for a old OS Folder 10xx needs to be working good Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526712 Share on other sites More sharing options...
Slice Posted November 1, 2017 Share Posted November 1, 2017 Same FakeSMC works from 10.6 up to 10.13.x Any example of system dependent kext? If so then it can be installed in SLE of the corresponding system. Yes, I agree if the feature is advertized then it should work. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526719 Share on other sites More sharing options...
chris1111 Posted November 1, 2017 Share Posted November 1, 2017 Same FakeSMC works from 10.6 up to 10.13.x Any example of system dependent kext? If so then it can be installed in SLE of the corresponding system. Yes, I agree if the feature is advertized then it should work. Do you have a FakeSMC 10.6 to 10.13 ? I am already asking you for ! This is your respond ➤ FakeSMC 10.6.8 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526727 Share on other sites More sharing options...
Slice Posted November 1, 2017 Share Posted November 1, 2017 Do you have a FakeSMC 10.6 to 10.13 ? I am already asking you for ! This is your respond ➤ FakeSMC 10.6.8 I have no 3.5.0 for 10.6 because I have no Xcode 4.4.1, the last version able to compile to 32 bit. But 3.5.0 sources is compatible with 10.6 if you compile them by yourself. FakeSMC 3.4.1 should work in 10.13 too. There is a little problem with HWInfo that must be installed in SLE. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526731 Share on other sites More sharing options...
Sherlocks Posted November 1, 2017 Share Posted November 1, 2017 Do you have a FakeSMC 10.6 to 10.13 ? I am already asking you for ! This is your respond ➤ FakeSMC 10.6.8 If you want to use fakesmc for supported all osx, try to use rehabman build. I tested all osx since 10.6 to 10.13.2 beta1 on my hp probook 4230s. Only I put his kext in other folder. EDIT1. I also tested Kozlek build. On 4230s, get random kp if use plugins files on high sierra. Rehabman build is stable for me on all osx. 나의 LG-F800S 의 Tapatalk에서 보냄 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526739 Share on other sites More sharing options...
Matgen84 Posted November 1, 2017 Share Posted November 1, 2017 Hi @Slice macOS 10.13.2 Beta 1: In Clover GUI "mac null" appears during phase 2 when I re-boot and select "Install macOS on HDXX". And Like Sherlocks, Kext management don't show any folder, so I can't disabled any kexts. So I watched In macOS 10.13.2 thread, I can install now 10.13.2 Beta with -lilubeta and -alcbeta (1.21 compiled by myself) 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526748 Share on other sites More sharing options...
Guest ricoc90 Posted November 1, 2017 Share Posted November 1, 2017 I have the same issue when it comes to no buildversion detection for macOS (update) installer as well as empty kext inject management, as reported here (Issue persists in r4278) As of Lilu: The latest version works fine and doesn't need -lilubeta. Same goes for AppleALC (both are v1.2.1 in my case) Also, you don't need to "block" the injection for Lilu if it gives you a KP. bootarg -liluoff is sufficient. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526787 Share on other sites More sharing options...
Guest Posted November 1, 2017 Share Posted November 1, 2017 I have this problem with clover rev you can see in my signature I have an unsupported CPu I have a working config.plist with a fakecpuid and two kernel patches and IOCPIFamily Brumbaer kext to patch when I install a fresh or I updating to HighSierra beta or 10.3.1 I have Install disk name in clover boot loader start menu If I boot with my working config.plist I have an immediate reboot in ++++++++++ stage if I select Kernel XCPM I can boot and I can complete my installation When installation is over I can boot with my original config.plist without flagging Kernel XCPM It is no a big problem..but it is weird I can't boot with 4268 or 4259. I am able to boot with 4243 and before. In verbose boot with 4259 and 4268 it freezes right away and I'm not sure how to troubleshoot. I appreciate clover and any help you can give. Thanks johnm Attached photos of verbose freezing 4268, and the customize choices I made when installing clover upgrade only, thanks Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526827 Share on other sites More sharing options...
Guest Posted November 1, 2017 Share Posted November 1, 2017 To solve kext injection problem I move in clover boot disk option on another diskand then pressing space I can enter and see folder (other or 10.13) in kextinjection menu and disable problematic kext and then i can choose mac install disk icon to start Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526886 Share on other sites More sharing options...
bronxteck Posted November 1, 2017 Share Posted November 1, 2017 Slice maybe this come in handy came across it the other day https://github.com/phracker/MacOSX-SDKs 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526962 Share on other sites More sharing options...
tluck Posted November 1, 2017 Share Posted November 1, 2017 check 4279 commit -- seems something is missing? [CC] text/Extra/Clover_Install/CloverGrowerPro/edk2/Clover/rEFIt_UEFI/Platform/AcpiPatcher.c:763:29: error: use of undeclared identifier 'SSDT_SIGN' if (hdr->Signature != SSDT_SIGN || MatchIndex != -1) { ^1 error generated.make: *** [/Extra/Clover_Install/CloverGrowerPro/edk2/Build/Clover/RELEASE_XCODE9/X64/Clover/rEFIt_UEFI/refit/OUTPUT/Platform/AcpiPatcher.obj] Error 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2526998 Share on other sites More sharing options...
WinstonAce Posted November 1, 2017 Share Posted November 1, 2017 I have never had problems booting with Clover but latest additions (from today) causing instant panic when trying to boot 4277 works fine the problem is somewhere in the last two hours. or maybe it's XCODE update to 9.1? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527033 Share on other sites More sharing options...
bronxteck Posted November 1, 2017 Share Posted November 1, 2017 4285 booted fine for me Winston using build clover command Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527060 Share on other sites More sharing options...
Guest ricoc90 Posted November 1, 2017 Share Posted November 1, 2017 I have never had problems booting with Clover but latest additions (from today) causing instant panic when trying to boot 4277 works fine the problem is somewhere in the last two hours. or maybe it's XCODE update to 9.1? Builds and boots fine for me with XCODE 9.1 (r4286) 0:100 0:000 Starting Clover revision: 4286 on American Megatrends EFI 0:100 0:000 Build with: [Args: -t XCODE9 -D NO_GRUB_DRIVERS -D NO_GRUB_DRIVERS_EMBEDDED -x64 | -D NO_GRUB_DRIVERS -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE9 -n 5 | OS: 10.13.2 | XCODE: 9.1] Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527069 Share on other sites More sharing options...
WinstonAce Posted November 1, 2017 Share Posted November 1, 2017 can you upload yours Cloverx64.efi? to see if it's my build or something that changed? thanks Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527076 Share on other sites More sharing options...
tluck Posted November 1, 2017 Share Posted November 1, 2017 problems here too with latest Clover 4282-4286 all get stuck. i verbose I see 2 lines from OsxAptioFix2 and then nothing - total hang last working version is 4278 cannot build 4279-4281 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527081 Share on other sites More sharing options...
Mork vom Ork Posted November 1, 2017 Share Posted November 1, 2017 There seems something wrong with rev. 4282 - DSDT FixMask: this is my config.plist in the section of DSDT Fixes: And this is the summary, when booting CLOVER rev. 4285: and this within the DSDT fix mask menu: as you may notice: NONE of my selections from config.plist are marked here. After i marked them manually: so for no: everytime i reboot, i have to make this selection manually. Selection won't bet set by CLOVER, referenced by config.plist. Maybe just a small bug, but anyway: i just want to let you know. MY FAULT, please forget about the above. Forget to copy new "BOOTX64.efi" and "CLOVERX64.efi" to my main bootdrives EFI folder. Did so now and now i have the same problem like all the others: CLOVER main menu appears, but after hitting ENTER to start from selected drive, screens just turn black and nothing happens. Machine totally hangs. BUT: DSDT fixes now work as expected. PS: and another one: shouldn't it be named "Fix SBUS" instead of "Add SMBUS" ? 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527082 Share on other sites More sharing options...
Gigamaxx Posted November 1, 2017 Share Posted November 1, 2017 There seems something wrong with rev. 4282 - DSDT FixMask: this is my config.plist in the section of DSDT Fixes: And this is the summary, when booting CLOVER rev. 4285: and this within the DSDT fix mask menu: as you may notice: NONE of my selections from config.plist are marked here. After i marked them manually: so for no: everytime i reboot, i have to make this selection manually. Selection won't bet set by CLOVER, referenced by config.plist. Maybe just a small bug, but anyway: i just want to let you know. PS: and another one: shouldn't it be named "Fix SBUS" instead of "Add SMBUS" ? Do you have a EFI Backup folder on main partition? If DSDT values on the Backup config.plist are zero this may be the issue. I have found if the backup config.plist is not exactly the same as the EFI plist then my boot screen menu shows incorrect values. If you install new version of clover the old one goes to Backup EFI folder when using RCScripts option. Just a possibility. 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527093 Share on other sites More sharing options...
Lucy183 Posted November 1, 2017 Share Posted November 1, 2017 All fine here: r4286, Xcode 8.1, Sierra 10.12.6 16G1036 - first in signature. I don't need any AptioFix btw, maybe the problem is with OsxAptioFix drivers. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527096 Share on other sites More sharing options...
tluck Posted November 1, 2017 Share Posted November 1, 2017 problems start with 4279 - if I fix AcpiPatcher.c to compile (SSDT_SIGN is replaced with EFI_ACPI_4_0_SECONDARY_SYSTEM_DESCRIPTION_TABLE_SIGNATURE) then it will compile. but then then the problems start. Howver, if I revert to r4278 AcpiPatcher - put this file in r4279. then no problem. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527105 Share on other sites More sharing options...
Mork vom Ork Posted November 1, 2017 Share Posted November 1, 2017 Fixed the issue with latest CLOVER rev.: it is the changes from rev. 4281. If i replace the changed files from that rev. with the unmodified files from rev. 4278, i could boot once again normal into macOS Desktop. These two files have been changed in rev. 4281: /rEFIt_UEFI/Platform/AcpiPatcher.c /rEFIt_UEFI/libeg/image.c If you switch back to a copy of those two files from (for example) rev. 4278 and re-compile CLOVER, it gives back sucessfull boot into Desktop. At least for me it does. Attached you will find those two "unmodified" files from rev. 4278 also attached: recompiled "BOOTX64.efi" and "CLOVERX64.efi" <-- just "switch" those to files within your EFI folder. My "bdmesg" bootlog from rev. 4286: 0:100 0:100 MemLog inited, TSC freq: 40085691100:100 0:000 CPU was calibrated without ACPI PM Timer: ACPI I/O space is not enabled., use RTC0:100 0:0000:100 0:000 Now is 1.11.2017, 22:16:24 (GMT)0:100 0:000 Starting Clover revision: 4286 on American Megatrends EFI0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.13.2 | XCODE: 9.1]0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000) @8CC9AB580:100 0:000 SelfDirPath = \EFI\BOOT0:100 0:000 === [ Get Smbios ] ========================================0:100 0:000 Type 16 Index = 00:100 0:000 Total Memory Slots Count = 40:100 0:000 Type 17 Index = 00:100 0:000 SmbiosTable.Type17->Speed = 3200MHz0:100 0:000 SmbiosTable.Type17->Size = 8192MB0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM00:100 0:000 SmbiosTable.Type17->Vendor = 029E0:100 0:000 SmbiosTable.Type17->SerialNumber = 000000000:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C160:100 0:000 Type 17 Index = 10:100 0:000 SmbiosTable.Type17->Speed = 3200MHz0:100 0:000 SmbiosTable.Type17->Size = 8192MB0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM10:100 0:000 SmbiosTable.Type17->Vendor = 029E0:100 0:000 SmbiosTable.Type17->SerialNumber = 000000000:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C160:100 0:000 Type 17 Index = 20:100 0:000 SmbiosTable.Type17->Speed = 3200MHz0:100 0:000 SmbiosTable.Type17->Size = 8192MB0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM00:100 0:000 SmbiosTable.Type17->Vendor = 029E0:100 0:000 SmbiosTable.Type17->SerialNumber = 000000000:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C160:100 0:000 Type 17 Index = 30:100 0:000 SmbiosTable.Type17->Speed = 3200MHz0:100 0:000 SmbiosTable.Type17->Size = 8192MB0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM10:100 0:000 SmbiosTable.Type17->Vendor = 029E0:100 0:000 SmbiosTable.Type17->SerialNumber = 000000000:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C160:100 0:000 Boot status=00:100 0:000 Running on: 'To Be Filled By O.E.M.' with board 'Z270 SuperCarrier'0:100 0:000 === [ GetCPUProperties ] ==================================0:100 0:000 CPU Vendor = 756E6547 Model=506E30:100 0:000 The CPU supported SSE4.10:100 0:000 BrandString = Intel® Core i7-6700K CPU @ 4.00GHz0:100 0:000 The CPU supported turbo0:100 0:000 MSR 0x35 400080:100 0:000 TSC/CCC Information Leaf:0:100 0:000 numerator : 3340:100 0:000 denominator : 20:100 0:000 Calibrated ARTFrequency: 240034070:100 0:000 MSR 0xE2 before patch 1E0000000:100 0:000 MSR 0xCE 00080838_F10128000:100 0:000 MSR 0x1A0 008500890:100 0:000 corrected FLEX_RATIO = E00000:100 0:000 MSR 0x1B0 000000000:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz0:100 0:000 MaxDiv/MinDiv: 40.0/80:100 0:000 Turbo: 42/42/42/420:100 0:000 Features: 0xBFEBFBFF0:100 0:000 Threads: 80:100 0:000 Cores: 40:100 0:000 FSB: 100 MHz0:100 0:000 CPU: 4000 MHz0:100 0:000 TSC: 4000 MHz0:100 0:000 PIS: 100 MHz0:100 0:000 ExternalClock: 25 MHz0:100 0:000 === [ GetDevices ] ========================================0:100 0:000 PCI (00|00:00.00) : 8086 191F class=0600000:100 0:000 PCI (00|00:01.00) : 8086 1901 class=0604000:100 0:000 PCI (00|01:00.00) : 10B5 8747 class=0604000:100 0:000 PCI (00|02:08.00) : 10B5 8747 class=0604000:100 0:000 PCI (00|03:00.00) : 1002 67DF class=0300000:101 0:000 - GFX: Model=AMD Radeon RX480 (ATI/AMD)0:101 0:000 PCI (00|03:00.01) : 1002 AAF0 class=0403000:101 0:000 - HDMI Audio:0:101 0:000 PCI (00|02:10.00) : 10B5 8747 class=0604000:101 0:000 PCI (00|00:14.00) : 8086 A2AF class=0C03300:101 0:000 PCI (00|00:14.02) : 8086 A2B1 class=1180000:101 0:000 PCI (00|00:16.00) : 8086 A2BA class=0780000:101 0:000 PCI (00|00:17.00) : 8086 A282 class=0106010:101 0:000 PCI (00|00:1B.00) : 8086 A2E7 class=0604000:101 0:000 PCI (00|05:00.00) : 144D A804 class=0108020:101 0:000 PCI (00|00:1C.00) : 8086 A290 class=0604000:101 0:000 PCI (00|00:1C.05) : 8086 A295 class=0604000:101 0:000 PCI (00|07:00.00) : 1B21 1184 class=0604000:101 0:000 PCI (00|08:01.00) : 1B21 1184 class=0604000:101 0:000 PCI (00|09:00.00) : 8086 08B3 class=0280000:101 0:000 - WIFI: Vendor=Intel0:101 0:000 PCI (00|08:03.00) : 1B21 1184 class=0604000:101 0:000 PCI (00|0A:00.00) : 8086 1539 class=0200000:101 0:000 - LAN: 0 Vendor=Intel0:101 0:000 PCI (00|00:1C.07) : 8086 A297 class=0604000:101 0:000 PCI (00|0B:00.00) : DD01 0003 class=0480000:101 0:000 PCI (00|00:1D.00) : 8086 A298 class=0604000:101 0:000 PCI (00|0C:00.00) : 144D A802 class=0108020:101 0:000 PCI (00|00:1F.00) : 8086 A2C5 class=0601000:101 0:000 PCI (00|00:1F.02) : 8086 A2A1 class=0580000:101 0:000 PCI (00|00:1F.04) : 8086 A2A3 class=0C05000:101 0:000 PCI (00|00:1F.06) : 8086 15B8 class=0200000:101 0:000 - LAN: 1 Vendor=Intel0:101 0:000 === [ GetDefaultSettings ] ================================0:101 0:000 Clover load options size = 0 bytes0:103 0:002 EFI\CLOVER\config.plist loaded: Success0:103 0:000 ---dump hibernations data---0:110 0:006 Firmware wake address=000000000:110 0:000 Firmware wake 64 addr= 00:110 0:000 Hardware signature =5598703E0:110 0:000 GlobalLock =000000000:110 0:000 Flags =000000000:110 0:000 === [ GetListOfThemes ] ===================================0:110 0:000 - [00]: Classic Mac OS0:111 0:000 - [01]: random0:111 0:000 - [01]: embedded0:112 0:000 === [ Found config plists ] ===============================0:112 0:000 - config.plist0:112 0:000 === [ GetEarlyUserSettings ] ==============================0:112 0:000 timeout set to 100:112 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)0:112 0:000 KextsToPatch: 5 requested0:112 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: data len: 1200:112 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: data len: 720:112 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 110:112 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 110:112 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: data len: 40:112 0:000 - patch disabled at config0:112 0:000 Default theme: Beauty0:112 0:000 === [ LoadDrivers ] =======================================0:113 0:000 Loading HFSPlus-64.efi status=Success0:114 0:001 - driver needs connecting0:114 0:000 Loading OsxFatBinaryDrv-64.efi status=Success0:115 0:001 Loading AppleImageCodec-64.efi status=Success0:116 0:001 Loading AppleUITheme-64.efi status=Success0:118 0:001 Loading DataHubDxe-64.efi status=Success0:120 0:002 Loading AppleKeyAggregator-64.efi status=Success0:122 0:001 Loading apfs.efi status=Success0:124 0:002 - driver needs connecting0:124 0:000 Loading FSInject-64.efi status=Success0:125 0:001 Loading FirmwareVolume-64.efi status=Success0:127 0:001 Loading SMCHelper-64.efi status=Success0:128 0:001 Loading OsxAptioFixDrv-64.efi status=Success0:130 0:001 Loading Test2-2016.efi status=Success0:131 0:001 2 drivers needs connecting ...0:131 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success0:131 0:000 HFS+ driver loaded0:131 0:000 APFS driver loaded0:131 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok3:215 3:083 === [ InitScreen ] ========================================3:215 0:000 SetMaxResolution: found best mode 0: 3840x21603:215 0:000 - already set3:215 0:000 Console modes reported: 4, available modes:3:215 0:000 - [01]: 80x25 (current mode)3:215 0:000 - [02]: 128x403:215 0:000 - [03]: 100x313:215 0:000 - [04]: 480x1133:215 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000)3:216 0:000 Using embedded font: Success3:216 0:000 === [ GetMacAddress ] =====================================3:216 0:000 get legacy LAN MAC, 2 card found3:216 0:000 Legacy MAC address of LAN #0= FF:FF:FF:FF:FF:FF:3:216 0:000 Legacy MAC address of LAN #1= FF:FF:FF:FF:FF:FF:3:216 0:000 === [ ScanSPD ] ===========================================3:217 0:000 SMBus device : 8086 A2A3 class=0C0500 status=Success3:217 0:000 SMBus CmdReg: 0x33:217 0:000 Scanning SMBus [8086:A2A3], mmio: 0xFFF10004, ioport: 0xF000, hostc: 0x13:217 0:000 Slots to scan [8]...3:217 0:000 SPD[0]: Got invalid type 0 @0x50. Will set page and retry.3:218 0:000 SPD[0]: Type 12 @0x503:236 0:017 XMP Profile1: 5*125 0 ns3:236 0:000 Found module with XMP version 2.03:236 0:000 Using XMP Profile1 instead of standard frequency 2132MHz3:236 0:000 DDR speed 3200MHz3:236 0:000 Slot: 0 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=00000000000000003:236 0:000 SPD[1]: Type 12 @0x513:254 0:017 XMP Profile1: 5*125 0 ns3:254 0:000 Found module with XMP version 2.03:254 0:000 Using XMP Profile1 instead of standard frequency 2132MHz3:254 0:000 DDR speed 3200MHz3:254 0:000 Slot: 1 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=00000000000000003:255 0:000 SPD[2]: Type 12 @0x523:273 0:017 XMP Profile1: 5*125 0 ns3:273 0:000 Found module with XMP version 2.03:273 0:000 Using XMP Profile1 instead of standard frequency 2132MHz3:273 0:000 DDR speed 3200MHz3:273 0:000 Slot: 2 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=00000000000000003:273 0:000 SPD[3]: Type 12 @0x533:291 0:017 XMP Profile1: 5*125 0 ns3:291 0:000 Found module with XMP version 2.03:291 0:000 Using XMP Profile1 instead of standard frequency 2132MHz3:291 0:000 DDR speed 3200MHz3:291 0:000 Slot: 3 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=00000000000000003:292 0:000 === [ GetAcpiTablesList ] =================================3:298 0:006 Get Acpi Tables List from RSDT:3:298 0:000 - [00]: FACP A M I len=1323:298 0:000 - [01]: APIC A M I len=1883:298 0:000 - [02]: FPDT A M I len=683:298 0:000 - [03]: MCFG A M I len=603:298 0:000 - [04]: SSDT SataTabl len=8873:298 0:000 - [05]: FIDT A M I len=1563:298 0:000 - [06]: SSDT SaSsdt len=126283:298 0:000 - [07]: SSDT PegSsdt len=91633:298 0:000 - [08]: HPET SKL len=563:298 0:000 - [09]: SSDT xh_rvp08 len=26073:298 0:000 - [10]: UEFI EDK2 len=663:298 0:000 - [11]: SSDT CpuSsdt len=38063:298 0:000 - [12]: AAFT OEMAAFT len=12043:298 0:000 - [13]: LPIT SKL len=1483:298 0:000 - [14]: WSMT SKL len=403:298 0:000 - [15]: DBGP len=523:298 0:000 - [16]: DBG2 len=843:298 0:000 - [17]: VFCT A M I len=605483:298 0:000 - [18]: BGRT A M I len=563:298 0:000 - [19]: ASF! HCG len=1603:298 0:000 Calibrated TSC Frequency = 4008569110 = 4008MHz3:298 0:000 === [ GetUserSettings ] ===================================3:298 0:000 USB FixOwnership: yes3:298 0:000 Dropping 8 tables:3:298 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="CpuCst" (0000747343757043)3:298 0:000 - set table: 54445353, 747343757043 to drop: no3:298 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)3:298 0:000 - set table: 54445353, 6D50757043 to drop: no3:298 0:000 - [02]: Drop table signature="SSDT" (54445353) table-id="CpuSsdt" (0074647353757043)3:298 0:000 - set table: 54445353, 74647353757043 to drop: yes3:298 0:000 - [03]: Drop table signature="SSDT" (54445353) table-id="PegSsdt" (0074647353676550)3:298 0:000 - set table: 54445353, 74647353676550 to drop: yes3:298 0:000 - [04]: Drop table signature="SSDT" (54445353) table-id="SaSsdt" (0000746473536153)3:298 0:000 - set table: 54445353, 746473536153 to drop: no3:298 0:000 - [05]: Drop table signature="SSDT" (54445353) table-id="SataTabl" (6C62615461746153)3:298 0:000 - set table: 54445353, 6C62615461746153 to drop: yes3:298 0:000 - [06]: Drop table signature="SSDT" (54445353) table-id="xh_rvp08" (38307076725F6878)3:298 0:000 - set table: 54445353, 38307076725F6878 to drop: yes3:298 0:000 - [07]: Drop table signature="DMAR" (52414D44)3:298 0:000 - set table: 52414D44, 0 to drop: no3:298 0:000 - final DSDT Fix mask=204300853:298 0:000 PatchesDSDT: 4 requested3:298 0:000 - [00]: (Rename _OSI to XOSI) lenToFind: 4, lenToReplace: 43:298 0:000 - [01]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 43:298 0:000 - [02]: (Rename SAT0 to SATA) lenToFind: 4, lenToReplace: 43:298 0:000 - [03]: (Rename H_EC to EC) lenToFind: 4, lenToReplace: 43:299 0:000 Using ProductName from config3:299 0:000 ProductName: iMac18,33:299 0:000 Found same BiosVersion in clover and config3:299 0:000 BiosVersion: IM183.88Z.0151.B00.17080800343:299 0:000 BiosReleaseDate: 08/08/20173:299 0:000 Using FirmwareFeatures from config3:299 0:000 FirmwareFeatures: 0xFC0FE1363:299 0:000 Using FirmwareFeaturesMask from config3:299 0:000 FirmwareFeaturesMask: 0xFF1FFF3F3:299 0:000 PlatformFeature: 0x03:299 0:000 Board-ID set from config as Mac-BE088AF8C5EB4FA23:299 0:000 BoardType: 0xA3:299 0:000 ChassisType: 0x93:303 0:003 === [ ScanVolumes ] =======================================3:303 0:000 Found 14 volumes with blockIO3:303 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0)3:303 0:000 Found optical drive3:303 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)3:303 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000)3:303 0:000 Result of bootcode detection: bootable unknown (legacy)3:303 0:000 This is SelfVolume !!3:303 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)3:303 0:000 Result of bootcode detection: bootable unknown (legacy)3:303 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(3,GPT,63C709C0-F08E-4289-883F-9168344CF5B4,0x1D08D148,0x138800)3:303 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)3:303 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(1,GPT,248D8987-1278-4608-8BE3-5539F49675AB,0x800,0xF9800)3:304 0:000 Result of bootcode detection: bootable Windows (vista,win)3:304 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(2,GPT,D06276AE-C698-4322-A7BD-856F480F1B42,0xFA000,0x32000)3:304 0:000 Result of bootcode detection: bootable Windows (vista,win)3:304 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(3,GPT,45E54BC0-D8F3-4BD8-B1C0-C787609EDDD5,0x12C000,0x8000)3:304 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(4,GPT,081E5F11-6E6E-4976-A1E7-F556B301B0DE,0x134000,0x1DBBF000)3:304 0:000 Result of bootcode detection: bootable Windows (vista,win)3:304 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6E8288321DC8AF4FB39EF530E02F4D00)3:304 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)3:304 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,85578F84A8D72C448459823DDC301040)3:304 0:000 - [13]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0C6A961A72BC6E4CB6A2D243B967BAF0)3:304 0:000 === [ InitTheme ] =========================================3:304 0:000 GlobalConfig: theme.plist not found, get random theme Classic Mac OS3:305 0:000 Using theme 'Classic Mac OS' (EFI\CLOVER\themes\Classic Mac OS)3:305 0:000 OS main and drive as badge3:307 0:001 Loading font from ThemeDir: Success3:307 0:000 Choosing theme Classic Mac OS3:308 0:000 after NVRAM boot-args=-v -f3:308 0:000 === [ Dump SMC keys from NVRAM ] ==========================3:308 0:000 found AppleSMC protocol3:363 0:055 === [ AddCustomEntries ] ==================================3:363 0:000 Custom entry 0 skipped because it is hidden.3:363 0:000 Custom entry 1 skipped because it is hidden.3:363 0:000 Custom entry 2 skipped because it is hidden.3:363 0:000 Custom entry 2 skipped because it is hidden.3:363 0:000 Custom entry 2 skipped because it is hidden.3:363 0:000 Custom entry 2 skipped because it is hidden.3:363 0:000 Custom entry 2 skipped because it is hidden.3:363 0:000 === [ ScanLoader ] ========================================3:363 0:000 - [02]: 'EFI'3:373 0:010 - [06]: 'Wiederherstellung'3:380 0:006 - [07]: 'EFI'3:381 0:000 AddLoaderEntry for Volume Name=EFI3:381 0:000 Not match custom entry 0: Type: not match3:381 0:000 Not match custom entry 1: Volume: not match, Type: not match3:381 0:000 Not match custom entry 2: Volume: not match, Type: not match3:389 0:008 - [09]: 'WINDOWS_10'3:396 0:006 - [10]: 'Preboot'3:419 0:022 AddLoaderEntry for Volume Name=Preboot3:419 0:000 Not match custom entry 0: Type: not match3:419 0:000 Skipped because matching custom entry 1!3:426 0:007 AddLoaderEntry for Volume Name=Preboot3:426 0:000 Not match custom entry 0: Type: not match3:426 0:000 Not match custom entry 1: Volume: match, Type: not match3:426 0:000 Skipped because matching custom entry 2!3:461 0:034 - [11]: 'HIGH_SIERRA_PCIe'3:519 0:058 AddLoaderEntry for Volume Name=HIGH_SIERRA_PCIe3:519 0:000 Not match custom entry 0: Type: not match3:519 0:000 Not match custom entry 1: Volume: not match, Type: match3:519 0:000 Not match custom entry 2: Volume: not match, Type: not match3:552 0:033 hibernated: set as never3:604 0:052 - [12]: 'Recovery'3:625 0:020 AddLoaderEntry for Volume Name=Recovery3:625 0:000 Skipped because matching custom entry 0!3:662 0:036 - [13]: 'VM'3:668 0:006 === [ AddCustomTool ] =====================================3:669 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi3:669 0:000 Checking EFI partition Volume 2 for Clover3:669 0:000 Found Clover3:670 0:001 === [ GetEfiBootDeviceFromNvram ] =========================3:671 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)3:671 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)'3:671 0:000 - LoaderPath: ''3:671 0:000 - Guid = 535A8AC0-AEB6-4C9B-8216-FC10937ADE343:671 0:000 === [ FindStartupDiskVolume ] =============================3:671 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)3:671 0:000 - searching for that partition3:671 0:000 - found entry 1. 'Boot macOS from HIGH_SIERRA_PCIe', Volume 'HIGH_SIERRA_PCIe'3:671 0:000 Boot redirected to Entry 1. 'Boot macOS from HIGH_SIERRA_PCIe'3:671 0:000 DefaultIndex=1 and MainMenu.EntryCount=83:761 0:089 GUI ready25:127 21:365 BootVariable of the entry is empty25:127 0:000 === [ StartLoader ] =======================================25:127 0:000 Finally: ExternalClock=25MHz BusSpeed=100214kHz CPUFreq=4009MHz PIS: hw.busfrequency=100000000Hz25:127 0:000 Loading boot.efi status=Success25:157 0:030 GetOSVersion: 10.13.2 (17C60c)25:157 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS25:157 0:000 Filtering KextPatches:25:157 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed25:157 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed25:157 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed25:157 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed25:157 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> disabled by user25:157 0:000 Will not patch boot.efi25:157 0:000 === [ PatchSmbios ] =======================================25:157 0:000 insert table 9 for dev 0:025:157 0:000 insert table 9 for dev 0:125:157 0:000 insert table 9 for dev 1F:625:157 0:000 insert table 9 for dev 0:025:158 0:000 Trusting SMBIOS...25:158 0:000 Channels: 225:158 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 2325:158 0:000 partNum=CMK32GX4M4B3200C1625:158 0:000 SMBIOS Type 17 Index = 0 => 0 0:25:158 0:000 BANK 0 DIMM0 3200MHz 8192MB25:158 0:000 partNum=CMK32GX4M4B3200C1625:158 0:000 SMBIOS Type 17 Index = 1 => 2 2:25:158 0:000 BANK 1 DIMM0 3200MHz 8192MB25:158 0:000 partNum=CMK32GX4M4B3200C1625:158 0:000 SMBIOS Type 17 Index = 2 => 1 1:25:158 0:000 BANK 0 DIMM1 3200MHz 8192MB25:158 0:000 partNum=CMK32GX4M4B3200C1625:158 0:000 SMBIOS Type 17 Index = 3 => 3 3:25:158 0:000 BANK 1 DIMM1 3200MHz 8192MB25:158 0:000 mTotalSystemMemory = 3276825:158 0:000 NumberOfMemoryDevices = 425:158 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x200025:158 0:000 Type20[1]->End = 0x17FFFFF, Type17[2] = 0x800025:158 0:000 Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC00025:158 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x1400025:158 0:000 Table 131 is present, CPUType=1025:158 0:000 Change to: 70525:158 0:000 === [ PatchACPI ] =========================================25:158 0:000 RSDT 0x8EE3902825:158 0:000 FADT from RSDT: 0x8EE3917825:158 0:000 XSDT 0x8EE390A025:158 0:000 FADT from XSDT: 0x8EE5D7E825:158 0:000 Xsdt reallocation done25:158 0:000 old FADT length=11425:160 0:002 Apply DsdtFixMask=0x2043008525:160 0:000 drop _DSM mask=0xFFFF25:160 0:000 === [ FixBiosDsdt ] =======================================25:160 0:000 VideoCard devID=0x67DF100225:160 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x025:160 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE25:161 0:000 Patching DSDT:25:161 0:000 - [Rename _OSI to XOSI]: pattern 5F4F5349, patched at: [ (AD06) (889B) (3) (11) (18) (1C) (1C) (1A) (18) (18) (18) (18) ]25:161 0:000 - [Rename HDAS to HDEF]: pattern 48444153, patched at: [ (2E7) (12) (12) (BD7E) (157F) (84) (D) (2B) (32) (4F) (6F) (C3) (15866) ]25:161 0:000 - [Rename SAT0 to SATA]: pattern 53415430, patched at: [ (329) (16) (D) (16) (16) (D) (16) (16) (D) (16) (D4EF) (30) (12471) (1501) (4E2) (2A) (29) (2E) (2E) (2E) ]25:161 0:000 - [Rename H_EC to EC]: pattern 485F4543, patched at: [ (2D1) (2D6) (CEB6) (10) (534A) (1B) (15) (14) (139) (15) (25) (22) (15) (763) (16) (16) (33) (185) (9A) (A9C) (12) (F) (29) (12) (F) (2322) (14) (13A) (14) (CBC6) (1F) (24) (25) (57) (12) (10) (1D) (12) (10) (1B) (11) (1C) (11) (48D) (516) ]25:161 0:000 first CPU found at A9BD offset A9C025:161 0:000 score candidate at A9B925:161 0:000 score inserted in acpi_cpu_score _PR_25:161 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_25:162 0:000 Found PCIROOTUID = 025:162 0:000 Start RTC Fix25:162 0:000 found RTC Length not match, Maybe will cause CMOS reset will patch it.25:162 0:000 found RTC had IRQNoFlag will move -3 bytes25:162 0:000 ...len=2462525:162 0:000 new size written to 2345A shift=0 len=2462525:162 0:000 len after correct outers 2462525:163 0:000 Start SBUS Fix PCI=377D len=2462525:163 0:000 device (SBUS) found at C38D25:163 0:000 _DSM in SBUS already exists, dropped25:163 0:000 SBUS code size fix = 0x0000005E25:163 0:000 deleting device CRT_25:163 0:000 deleting device DVI_25:164 0:000 deleting device SPKR25:164 0:000 deleting device ECP_25:165 0:000 deleting device LPT_25:165 0:000 deleting device FDC025:165 0:000 deleting device ECP125:166 0:000 deleting device LPT125:166 0:000 deleting device EPC_25:167 0:000 Start Darwin Fix25:167 0:000 Start SHUTDOWN Fix len=245C725:167 0:000 === [ ACPIDropTables ] ====================================25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuSsdt Length=380625:167 0:000 Xsdt has tables count=2025:167 0:000 Table: SSDT CpuSsdt 3806 dropped25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=xh_rvp08 Length=260725:167 0:000 Xsdt has tables count=1925:167 0:000 Table: SSDT xh_rvp08 2607 dropped25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=PegSsdt Length=916325:167 0:000 Xsdt has tables count=1825:167 0:000 Table: SSDT PegSsdt 9163 dropped25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=SataTabl Length=88725:167 0:000 Xsdt has tables count=1725:167 0:000 Table: SSDT SataTabl 887 dropped25:167 0:000 === [ PatchAllSSDT ] ======================================25:167 0:000 Patch table: SSDT SaSsdt len=0x315425:167 0:000 0. [Rename _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched!25:167 0:000 1. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched!25:167 0:000 2. [Rename SAT0 to SATA]: pattern 53415430, bin not found / already patched!25:167 0:000 3. [Rename H_EC to EC]: pattern 485F4543, bin not found / already patched!25:167 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=025:167 0:000 Xsdt has tables count=1625:167 0:000 === [ ACPIPatchedAML ] ====================================25:167 0:000 Sorted25:167 0:000 Inserting table[0]:SSDT-2-PegSsdt.aml from EFI\CLOVER\ACPI\patched ... Success25:168 0:000 Inserting table[1]:SSDT-3-UsbFix.aml from EFI\CLOVER\ACPI\patched ... Success25:168 0:000 Inserting table[2]:SSDT-5-eGpu.aml from EFI\CLOVER\ACPI\patched ... Success25:168 0:000 Inserting table[3]:SSDT-6-Xosi.aml from EFI\CLOVER\ACPI\patched ... Success25:169 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=125:169 0:000 Maximum control=0x2825:169 0:000 Turbo control=0x2A25:169 0:000 P-States: min 0x8, max 0x2A25:169 0:000 SSDT with plugin-type without P-States is generated25:169 0:000 SSDT with CPU C-States generated successfully25:169 0:000 === [ RestSetup macOS ] ===================================25:169 0:000 EdidDiscovered size=12825:169 0:000 Inject EDID25:169 0:000 ------- EDID Table25:169 0:000 000 | 00 FF FF FF FF FF FF 00 1E 6D25:169 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 0425:169 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E25:169 0:000 030 | A3 26 0F 50 54 21 08 00 71 4025:169 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 0025:169 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 7025:169 0:000 060 | 3E 80 30 20 65 0C 58 54 21 0025:169 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 8025:169 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A25:169 0:000 090 | 00 00 00 FD 00 30 3D 87 87 3825:169 0:000 100 | 01 0A 20 20 20 20 20 20 00 0025:169 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 7225:169 0:000 120 | 61 20 48 44 0A 20 01 0F25:169 0:000 VendorID = 0x1E6D25:169 0:000 ProductID = 0x5B0925:169 0:000 ------- New EDID Table25:169 0:000 000 | 00 FF FF FF FF FF FF 00 6D 1E25:169 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 0425:169 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E25:169 0:000 030 | A3 26 0F 50 54 21 08 00 71 4025:169 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 0025:169 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 7025:169 0:000 060 | 3E 80 30 20 65 0C 58 54 21 0025:169 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 8025:169 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A25:169 0:000 090 | 00 00 00 FD 00 30 3D 87 87 3825:169 0:000 100 | 01 0A 20 20 20 20 20 20 00 0025:169 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 7225:169 0:000 120 | 61 20 48 44 0A 20 01 0F25:169 0:000 ATI injection not set25:169 0:000 RCBA disabled; cannot use it25:169 0:000 stringlength = 88625:169 0:000 CurrentMode: Width=3840 Height=216025:169 0:000 Beginning FSInjectionFSInjectionInstall ...- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BFDEF18FSInjectionInstall ...- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BFDEF1825:176 0:006 Use origin smbios table type 1 guid.25:187 0:011 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other25:187 0:000 Extra kext: EFI\CLOVER\kexts\Other\AMD9xxxControllerPatcher.kext25:189 0:001 Extra kext: EFI\CLOVER\kexts\Other\Z270-USB.kext25:190 0:001 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext25:193 0:002 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext25:194 0:001 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\W836x.kext25:195 0:001 Extra kext: EFI\CLOVER\kexts\Other\AppleIGB.kext25:198 0:002 Extra kext: EFI\CLOVER\kexts\Other\EFICheckDisabler.kext25:200 0:002 Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext25:203 0:003 SetStartupDiskVolume:25:203 0:000 * Volume: 'HIGH_SIERRA_PCIe'25:203 0:000 * LoaderPath: ''25:203 0:000 * DevPath: HIGH_SIERRA_PCIe25:203 0:000 * GUID = 535A8AC0-AEB6-4C9B-8216-FC10937ADE3425:204 0:000 * efi-boot-device: IOMatchIOProviderClassIOMediaIOPropertyMatchUUID535A8AC0-AEB6-4C9B-8216-FC10937ADE3425:204 0:000 Custom boot screen not used because entry has unset use graphics unmodified_files_from_rev4278.zip recompiled_rev4286.zip Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527106 Share on other sites More sharing options...
Guest ricoc90 Posted November 1, 2017 Share Posted November 1, 2017 can you upload yours Cloverx64.efi? to see if it's my build or something that changed? thanks Sure CLOVERX64.efi.zip Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527115 Share on other sites More sharing options...
RehabMan Posted November 2, 2017 Share Posted November 2, 2017 Fixed the issue with latest CLOVER rev.: it is the changes from rev. 4281. If i replace the changed files from that rev. with the unmodified files from rev. 4278, i could boot once again normal into macOS Desktop. These two files have been changed in rev. 4281: /rEFIt_UEFI/Platform/AcpiPatcher.c /rEFIt_UEFI/libeg/image.c If you switch back to a copy of those two files from (for example) rev. 4278 and re-compile CLOVER, it gives back sucessfull boot into Desktop. At least for me it does. Attached you will find those two "unmodified" files from rev. 4278 also attached: recompiled "BOOTX64.efi" and "CLOVERX64.efi" <-- just "switch" those to files within your EFI folder. My "bdmesg" bootlog from rev. 4286: 0:100 0:100 MemLog inited, TSC freq: 4008569110 0:100 0:000 CPU was calibrated without ACPI PM Timer: ACPI I/O space is not enabled., use RTC 0:100 0:000 0:100 0:000 Now is 1.11.2017, 22:16:24 (GMT) 0:100 0:000 Starting Clover revision: 4286 on American Megatrends EFI 0:100 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 9 | OS: 10.13.2 | XCODE: 9.1] 0:100 0:000 SelfDevicePath=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000) @8CC9AB58 0:100 0:000 SelfDirPath = \EFI\BOOT 0:100 0:000 === [ Get Smbios ] ======================================== 0:100 0:000 Type 16 Index = 0 0:100 0:000 Total Memory Slots Count = 4 0:100 0:000 Type 17 Index = 0 0:100 0:000 SmbiosTable.Type17->Speed = 3200MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = 029E 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16 0:100 0:000 Type 17 Index = 1 0:100 0:000 SmbiosTable.Type17->Speed = 3200MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 029E 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16 0:100 0:000 Type 17 Index = 2 0:100 0:000 SmbiosTable.Type17->Speed = 3200MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0 0:100 0:000 SmbiosTable.Type17->Vendor = 029E 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16 0:100 0:000 Type 17 Index = 3 0:100 0:000 SmbiosTable.Type17->Speed = 3200MHz 0:100 0:000 SmbiosTable.Type17->Size = 8192MB 0:100 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1 0:100 0:000 SmbiosTable.Type17->Vendor = 029E 0:100 0:000 SmbiosTable.Type17->SerialNumber = 00000000 0:100 0:000 SmbiosTable.Type17->PartNumber = CMK32GX4M4B3200C16 0:100 0:000 Boot status=0 0:100 0:000 Running on: 'To Be Filled By O.E.M.' with board 'Z270 SuperCarrier' 0:100 0:000 === [ GetCPUProperties ] ================================== 0:100 0:000 CPU Vendor = 756E6547 Model=506E3 0:100 0:000 The CPU supported SSE4.1 0:100 0:000 BrandString = Intel® Core i7-6700K CPU @ 4.00GHz 0:100 0:000 The CPU supported turbo 0:100 0:000 MSR 0x35 40008 0:100 0:000 TSC/CCC Information Leaf: 0:100 0:000 numerator : 334 0:100 0:000 denominator : 2 0:100 0:000 Calibrated ARTFrequency: 24003407 0:100 0:000 MSR 0xE2 before patch 1E000000 0:100 0:000 MSR 0xCE 00080838_F1012800 0:100 0:000 MSR 0x1A0 00850089 0:100 0:000 corrected FLEX_RATIO = E0000 0:100 0:000 MSR 0x1B0 00000000 0:100 0:000 FSBFrequency = 100 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 0:100 0:000 MaxDiv/MinDiv: 40.0/8 0:100 0:000 Turbo: 42/42/42/42 0:100 0:000 Features: 0xBFEBFBFF 0:100 0:000 Threads: 8 0:100 0:000 Cores: 4 0:100 0:000 FSB: 100 MHz 0:100 0:000 CPU: 4000 MHz 0:100 0:000 TSC: 4000 MHz 0:100 0:000 PIS: 100 MHz 0:100 0:000 ExternalClock: 25 MHz 0:100 0:000 === [ GetDevices ] ======================================== 0:100 0:000 PCI (00|00:00.00) : 8086 191F class=060000 0:100 0:000 PCI (00|00:01.00) : 8086 1901 class=060400 0:100 0:000 PCI (00|01:00.00) : 10B5 8747 class=060400 0:100 0:000 PCI (00|02:08.00) : 10B5 8747 class=060400 0:100 0:000 PCI (00|03:00.00) : 1002 67DF class=030000 0:101 0:000 - GFX: Model=AMD Radeon RX480 (ATI/AMD) 0:101 0:000 PCI (00|03:00.01) : 1002 AAF0 class=040300 0:101 0:000 - HDMI Audio: 0:101 0:000 PCI (00|02:10.00) : 10B5 8747 class=060400 0:101 0:000 PCI (00|00:14.00) : 8086 A2AF class=0C0330 0:101 0:000 PCI (00|00:14.02) : 8086 A2B1 class=118000 0:101 0:000 PCI (00|00:16.00) : 8086 A2BA class=078000 0:101 0:000 PCI (00|00:17.00) : 8086 A282 class=010601 0:101 0:000 PCI (00|00:1B.00) : 8086 A2E7 class=060400 0:101 0:000 PCI (00|05:00.00) : 144D A804 class=010802 0:101 0:000 PCI (00|00:1C.00) : 8086 A290 class=060400 0:101 0:000 PCI (00|00:1C.05) : 8086 A295 class=060400 0:101 0:000 PCI (00|07:00.00) : 1B21 1184 class=060400 0:101 0:000 PCI (00|08:01.00) : 1B21 1184 class=060400 0:101 0:000 PCI (00|09:00.00) : 8086 08B3 class=028000 0:101 0:000 - WIFI: Vendor=Intel 0:101 0:000 PCI (00|08:03.00) : 1B21 1184 class=060400 0:101 0:000 PCI (00|0A:00.00) : 8086 1539 class=020000 0:101 0:000 - LAN: 0 Vendor=Intel 0:101 0:000 PCI (00|00:1C.07) : 8086 A297 class=060400 0:101 0:000 PCI (00|0B:00.00) : DD01 0003 class=048000 0:101 0:000 PCI (00|00:1D.00) : 8086 A298 class=060400 0:101 0:000 PCI (00|0C:00.00) : 144D A802 class=010802 0:101 0:000 PCI (00|00:1F.00) : 8086 A2C5 class=060100 0:101 0:000 PCI (00|00:1F.02) : 8086 A2A1 class=058000 0:101 0:000 PCI (00|00:1F.04) : 8086 A2A3 class=0C0500 0:101 0:000 PCI (00|00:1F.06) : 8086 15B8 class=020000 0:101 0:000 - LAN: 1 Vendor=Intel 0:101 0:000 === [ GetDefaultSettings ] ================================ 0:101 0:000 Clover load options size = 0 bytes 0:103 0:002 EFI\CLOVER\config.plist loaded: Success 0:103 0:000 ---dump hibernations data--- 0:110 0:006 Firmware wake address=00000000 0:110 0:000 Firmware wake 64 addr= 0 0:110 0:000 Hardware signature =5598703E 0:110 0:000 GlobalLock =00000000 0:110 0:000 Flags =00000000 0:110 0:000 === [ GetListOfThemes ] =================================== 0:110 0:000 - [00]: Classic Mac OS 0:111 0:000 - [01]: random 0:111 0:000 - [01]: embedded 0:112 0:000 === [ Found config plists ] =============================== 0:112 0:000 - config.plist 0:112 0:000 === [ GetEarlyUserSettings ] ============================== 0:112 0:000 timeout set to 10 0:112 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 0:112 0:000 KextsToPatch: 5 requested 0:112 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: data len: 120 0:112 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: data len: 72 0:112 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 11 0:112 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: data len: 11 0:112 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: data len: 4 0:112 0:000 - patch disabled at config 0:112 0:000 Default theme: Beauty 0:112 0:000 === [ LoadDrivers ] ======================================= 0:113 0:000 Loading HFSPlus-64.efi status=Success 0:114 0:001 - driver needs connecting 0:114 0:000 Loading OsxFatBinaryDrv-64.efi status=Success 0:115 0:001 Loading AppleImageCodec-64.efi status=Success 0:116 0:001 Loading AppleUITheme-64.efi status=Success 0:118 0:001 Loading DataHubDxe-64.efi status=Success 0:120 0:002 Loading AppleKeyAggregator-64.efi status=Success 0:122 0:001 Loading apfs.efi status=Success 0:124 0:002 - driver needs connecting 0:124 0:000 Loading FSInject-64.efi status=Success 0:125 0:001 Loading FirmwareVolume-64.efi status=Success 0:127 0:001 Loading SMCHelper-64.efi status=Success 0:128 0:001 Loading OsxAptioFixDrv-64.efi status=Success 0:130 0:001 Loading Test2-2016.efi status=Success 0:131 0:001 2 drivers needs connecting ... 0:131 0:000 PlatformDriverOverrideProtocol not found. Installing ... Success 0:131 0:000 HFS+ driver loaded 0:131 0:000 APFS driver loaded 0:131 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok 3:215 3:083 === [ InitScreen ] ======================================== 3:215 0:000 SetMaxResolution: found best mode 0: 3840x2160 3:215 0:000 - already set 3:215 0:000 Console modes reported: 4, available modes: 3:215 0:000 - [01]: 80x25 (current mode) 3:215 0:000 - [02]: 128x40 3:215 0:000 - [03]: 100x31 3:215 0:000 - [04]: 480x113 3:215 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000) 3:216 0:000 Using embedded font: Success 3:216 0:000 === [ GetMacAddress ] ===================================== 3:216 0:000 get legacy LAN MAC, 2 card found 3:216 0:000 Legacy MAC address of LAN #0= FF:FF:FF:FF:FF:FF: 3:216 0:000 Legacy MAC address of LAN #1= FF:FF:FF:FF:FF:FF: 3:216 0:000 === [ ScanSPD ] =========================================== 3:217 0:000 SMBus device : 8086 A2A3 class=0C0500 status=Success 3:217 0:000 SMBus CmdReg: 0x3 3:217 0:000 Scanning SMBus [8086:A2A3], mmio: 0xFFF10004, ioport: 0xF000, hostc: 0x1 3:217 0:000 Slots to scan [8]... 3:217 0:000 SPD[0]: Got invalid type 0 @0x50. Will set page and retry. 3:218 0:000 SPD[0]: Type 12 @0x50 3:236 0:017 XMP Profile1: 5*125 0 ns 3:236 0:000 Found module with XMP version 2.0 3:236 0:000 Using XMP Profile1 instead of standard frequency 2132MHz 3:236 0:000 DDR speed 3200MHz 3:236 0:000 Slot: 0 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000 3:236 0:000 SPD[1]: Type 12 @0x51 3:254 0:017 XMP Profile1: 5*125 0 ns 3:254 0:000 Found module with XMP version 2.0 3:254 0:000 Using XMP Profile1 instead of standard frequency 2132MHz 3:254 0:000 DDR speed 3200MHz 3:254 0:000 Slot: 1 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000 3:255 0:000 SPD[2]: Type 12 @0x52 3:273 0:017 XMP Profile1: 5*125 0 ns 3:273 0:000 Found module with XMP version 2.0 3:273 0:000 Using XMP Profile1 instead of standard frequency 2132MHz 3:273 0:000 DDR speed 3200MHz 3:273 0:000 Slot: 2 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000 3:273 0:000 SPD[3]: Type 12 @0x53 3:291 0:017 XMP Profile1: 5*125 0 ns 3:291 0:000 Found module with XMP version 2.0 3:291 0:000 Using XMP Profile1 instead of standard frequency 2132MHz 3:291 0:000 DDR speed 3200MHz 3:291 0:000 Slot: 3 Type 26 8192MB 3200MHz Vendor=Corsair PartNo=CMK32GX4M4B3200C16 SerialNo=0000000000000000 3:292 0:000 === [ GetAcpiTablesList ] ================================= 3:298 0:006 Get Acpi Tables List from RSDT: 3:298 0:000 - [00]: FACP A M I len=132 3:298 0:000 - [01]: APIC A M I len=188 3:298 0:000 - [02]: FPDT A M I len=68 3:298 0:000 - [03]: MCFG A M I len=60 3:298 0:000 - [04]: SSDT SataTabl len=887 3:298 0:000 - [05]: FIDT A M I len=156 3:298 0:000 - [06]: SSDT SaSsdt len=12628 3:298 0:000 - [07]: SSDT PegSsdt len=9163 3:298 0:000 - [08]: HPET SKL len=56 3:298 0:000 - [09]: SSDT xh_rvp08 len=2607 3:298 0:000 - [10]: UEFI EDK2 len=66 3:298 0:000 - [11]: SSDT CpuSsdt len=3806 3:298 0:000 - [12]: AAFT OEMAAFT len=1204 3:298 0:000 - [13]: LPIT SKL len=148 3:298 0:000 - [14]: WSMT SKL len=40 3:298 0:000 - [15]: DBGP len=52 3:298 0:000 - [16]: DBG2 len=84 3:298 0:000 - [17]: VFCT A M I len=60548 3:298 0:000 - [18]: BGRT A M I len=56 3:298 0:000 - [19]: ASF! HCG len=160 3:298 0:000 Calibrated TSC Frequency = 4008569110 = 4008MHz 3:298 0:000 === [ GetUserSettings ] =================================== 3:298 0:000 USB FixOwnership: yes 3:298 0:000 Dropping 8 tables: 3:298 0:000 - [00]: Drop table signature="SSDT" (54445353) table-id="CpuCst" (0000747343757043) 3:298 0:000 - set table: 54445353, 747343757043 to drop: no 3:298 0:000 - [01]: Drop table signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043) 3:298 0:000 - set table: 54445353, 6D50757043 to drop: no 3:298 0:000 - [02]: Drop table signature="SSDT" (54445353) table-id="CpuSsdt" (0074647353757043) 3:298 0:000 - set table: 54445353, 74647353757043 to drop: yes 3:298 0:000 - [03]: Drop table signature="SSDT" (54445353) table-id="PegSsdt" (0074647353676550) 3:298 0:000 - set table: 54445353, 74647353676550 to drop: yes 3:298 0:000 - [04]: Drop table signature="SSDT" (54445353) table-id="SaSsdt" (0000746473536153) 3:298 0:000 - set table: 54445353, 746473536153 to drop: no 3:298 0:000 - [05]: Drop table signature="SSDT" (54445353) table-id="SataTabl" (6C62615461746153) 3:298 0:000 - set table: 54445353, 6C62615461746153 to drop: yes 3:298 0:000 - [06]: Drop table signature="SSDT" (54445353) table-id="xh_rvp08" (38307076725F6878) 3:298 0:000 - set table: 54445353, 38307076725F6878 to drop: yes 3:298 0:000 - [07]: Drop table signature="DMAR" (52414D44) 3:298 0:000 - set table: 52414D44, 0 to drop: no 3:298 0:000 - final DSDT Fix mask=20430085 3:298 0:000 PatchesDSDT: 4 requested 3:298 0:000 - [00]: (Rename _OSI to XOSI) lenToFind: 4, lenToReplace: 4 3:298 0:000 - [01]: (Rename HDAS to HDEF) lenToFind: 4, lenToReplace: 4 3:298 0:000 - [02]: (Rename SAT0 to SATA) lenToFind: 4, lenToReplace: 4 3:298 0:000 - [03]: (Rename H_EC to EC) lenToFind: 4, lenToReplace: 4 3:299 0:000 Using ProductName from config 3:299 0:000 ProductName: iMac18,3 3:299 0:000 Found same BiosVersion in clover and config 3:299 0:000 BiosVersion: IM183.88Z.0151.B00.1708080034 3:299 0:000 BiosReleaseDate: 08/08/2017 3:299 0:000 Using FirmwareFeatures from config 3:299 0:000 FirmwareFeatures: 0xFC0FE136 3:299 0:000 Using FirmwareFeaturesMask from config 3:299 0:000 FirmwareFeaturesMask: 0xFF1FFF3F 3:299 0:000 PlatformFeature: 0x0 3:299 0:000 Board-ID set from config as Mac-BE088AF8C5EB4FA2 3:299 0:000 BoardType: 0xA 3:299 0:000 ChassisType: 0x9 3:303 0:003 === [ ScanVolumes ] ======================================= 3:303 0:000 Found 14 volumes with blockIO 3:303 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x0,0xFFFF,0x0) 3:303 0:000 Found optical drive 3:303 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00) 3:303 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(1,GPT,720D6289-EA74-409B-A02B-A652E4BB09C0,0x28,0x64000) 3:303 0:000 Result of bootcode detection: bootable unknown (legacy) 3:303 0:000 This is SelfVolume !! 3:303 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120) 3:303 0:000 Result of bootcode detection: bootable unknown (legacy) 3:303 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(3,GPT,63C709C0-F08E-4289-883F-9168344CF5B4,0x1D08D148,0x138800) 3:303 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00) 3:303 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(1,GPT,248D8987-1278-4608-8BE3-5539F49675AB,0x800,0xF9800) 3:304 0:000 Result of bootcode detection: bootable Windows (vista,win) 3:304 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(2,GPT,D06276AE-C698-4322-A7BD-856F480F1B42,0xFA000,0x32000) 3:304 0:000 Result of bootcode detection: bootable Windows (vista,win) 3:304 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(3,GPT,45E54BC0-D8F3-4BD8-B1C0-C787609EDDD5,0x12C000,0x8000) 3:304 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,F0-2E-16-5B-51-38-25-00)\HD(4,GPT,081E5F11-6E6E-4976-A1E7-F556B301B0DE,0x134000,0x1DBBF000) 3:304 0:000 Result of bootcode detection: bootable Windows (vista,win) 3:304 0:000 - [10]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,6E8288321DC8AF4FB39EF530E02F4D00) 3:304 0:000 - [11]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83) 3:304 0:000 - [12]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,85578F84A8D72C448459823DDC301040) 3:304 0:000 - [13]: Volume: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,0C6A961A72BC6E4CB6A2D243B967BAF0) 3:304 0:000 === [ InitTheme ] ========================================= 3:304 0:000 GlobalConfig: theme.plist not found, get random theme Classic Mac OS 3:305 0:000 Using theme 'Classic Mac OS' (EFI\CLOVER\themes\Classic Mac OS) 3:305 0:000 OS main and drive as badge 3:307 0:001 Loading font from ThemeDir: Success 3:307 0:000 Choosing theme Classic Mac OS 3:308 0:000 after NVRAM boot-args=-v -f 3:308 0:000 === [ Dump SMC keys from NVRAM ] ========================== 3:308 0:000 found AppleSMC protocol 3:363 0:055 === [ AddCustomEntries ] ================================== 3:363 0:000 Custom entry 0 skipped because it is hidden. 3:363 0:000 Custom entry 1 skipped because it is hidden. 3:363 0:000 Custom entry 2 skipped because it is hidden. 3:363 0:000 Custom entry 2 skipped because it is hidden. 3:363 0:000 Custom entry 2 skipped because it is hidden. 3:363 0:000 Custom entry 2 skipped because it is hidden. 3:363 0:000 Custom entry 2 skipped because it is hidden. 3:363 0:000 === [ ScanLoader ] ======================================== 3:363 0:000 - [02]: 'EFI' 3:373 0:010 - [06]: 'Wiederherstellung' 3:380 0:006 - [07]: 'EFI' 3:381 0:000 AddLoaderEntry for Volume Name=EFI 3:381 0:000 Not match custom entry 0: Type: not match 3:381 0:000 Not match custom entry 1: Volume: not match, Type: not match 3:381 0:000 Not match custom entry 2: Volume: not match, Type: not match 3:389 0:008 - [09]: 'WINDOWS_10' 3:396 0:006 - [10]: 'Preboot' 3:419 0:022 AddLoaderEntry for Volume Name=Preboot 3:419 0:000 Not match custom entry 0: Type: not match 3:419 0:000 Skipped because matching custom entry 1! 3:426 0:007 AddLoaderEntry for Volume Name=Preboot 3:426 0:000 Not match custom entry 0: Type: not match 3:426 0:000 Not match custom entry 1: Volume: match, Type: not match 3:426 0:000 Skipped because matching custom entry 2! 3:461 0:034 - [11]: 'HIGH_SIERRA_PCIe' 3:519 0:058 AddLoaderEntry for Volume Name=HIGH_SIERRA_PCIe 3:519 0:000 Not match custom entry 0: Type: not match 3:519 0:000 Not match custom entry 1: Volume: not match, Type: match 3:519 0:000 Not match custom entry 2: Volume: not match, Type: not match 3:552 0:033 hibernated: set as never 3:604 0:052 - [12]: 'Recovery' 3:625 0:020 AddLoaderEntry for Volume Name=Recovery 3:625 0:000 Skipped because matching custom entry 0! 3:662 0:036 - [13]: 'VM' 3:668 0:006 === [ AddCustomTool ] ===================================== 3:669 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi 3:669 0:000 Checking EFI partition Volume 2 for Clover 3:669 0:000 Found Clover 3:670 0:001 === [ GetEfiBootDeviceFromNvram ] ========================= 3:671 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83) 3:671 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83)' 3:671 0:000 - LoaderPath: '' 3:671 0:000 - Guid = 535A8AC0-AEB6-4C9B-8216-FC10937ADE34 3:671 0:000 === [ FindStartupDiskVolume ] ============================= 3:671 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1B,0x0)\Pci(0x0,0x0)\NVMe(0x1,74-20-B0-61-5C-38-25-00)\HD(2,GPT,535A8AC0-AEB6-4C9B-8216-FC10937ADE34,0x64028,0x1D029120)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,08C00AA6B6FBB146A486253C5B9A6F83) 3:671 0:000 - searching for that partition 3:671 0:000 - found entry 1. 'Boot macOS from HIGH_SIERRA_PCIe', Volume 'HIGH_SIERRA_PCIe' 3:671 0:000 Boot redirected to Entry 1. 'Boot macOS from HIGH_SIERRA_PCIe' 3:671 0:000 DefaultIndex=1 and MainMenu.EntryCount=8 3:761 0:089 GUI ready 25:127 21:365 BootVariable of the entry is empty 25:127 0:000 === [ StartLoader ] ======================================= 25:127 0:000 Finally: ExternalClock=25MHz BusSpeed=100214kHz CPUFreq=4009MHz PIS: hw.busfrequency=100000000Hz 25:127 0:000 Loading boot.efi status=Success 25:157 0:030 GetOSVersion: 10.13.2 (17C60c) 25:157 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_OS | CSR_ALLOW_UNAPPROVED_KEXTS 25:157 0:000 Filtering KextPatches: 25:157 0:000 - [00]: AMD9500Controller (ORINOCO FB patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed 25:157 0:000 - [01]: AMD9500Controller (Connectors Patch for Framebuffer ACRE for RX460 NITRO) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed 25:157 0:000 - [02]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed 25:157 0:000 - [03]: AMD9500Controller (ATY,Part#_Patch) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> allowed 25:157 0:000 - [04]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13 PB1) :: BinPatch :: [OS: 10.13.2 | MatchOS: All | MatchBuild: All] ==> disabled by user 25:157 0:000 Will not patch boot.efi 25:157 0:000 === [ PatchSmbios ] ======================================= 25:157 0:000 insert table 9 for dev 0:0 25:157 0:000 insert table 9 for dev 0:1 25:157 0:000 insert table 9 for dev 1F:6 25:157 0:000 insert table 9 for dev 0:0 25:158 0:000 Trusting SMBIOS... 25:158 0:000 Channels: 2 25:158 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 25:158 0:000 partNum=CMK32GX4M4B3200C16 25:158 0:000 SMBIOS Type 17 Index = 0 => 0 0: 25:158 0:000 BANK 0 DIMM0 3200MHz 8192MB 25:158 0:000 partNum=CMK32GX4M4B3200C16 25:158 0:000 SMBIOS Type 17 Index = 1 => 2 2: 25:158 0:000 BANK 1 DIMM0 3200MHz 8192MB 25:158 0:000 partNum=CMK32GX4M4B3200C16 25:158 0:000 SMBIOS Type 17 Index = 2 => 1 1: 25:158 0:000 BANK 0 DIMM1 3200MHz 8192MB 25:158 0:000 partNum=CMK32GX4M4B3200C16 25:158 0:000 SMBIOS Type 17 Index = 3 => 3 3: 25:158 0:000 BANK 1 DIMM1 3200MHz 8192MB 25:158 0:000 mTotalSystemMemory = 32768 25:158 0:000 NumberOfMemoryDevices = 4 25:158 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000 25:158 0:000 Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000 25:158 0:000 Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000 25:158 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000 25:158 0:000 Table 131 is present, CPUType=10 25:158 0:000 Change to: 705 25:158 0:000 === [ PatchACPI ] ========================================= 25:158 0:000 RSDT 0x8EE39028 25:158 0:000 FADT from RSDT: 0x8EE39178 25:158 0:000 XSDT 0x8EE390A0 25:158 0:000 FADT from XSDT: 0x8EE5D7E8 25:158 0:000 Xsdt reallocation done 25:158 0:000 old FADT length=114 25:160 0:002 Apply DsdtFixMask=0x20430085 25:160 0:000 drop _DSM mask=0xFFFF 25:160 0:000 === [ FixBiosDsdt ] ======================================= 25:160 0:000 VideoCard devID=0x67DF1002 25:160 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 25:160 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE 25:161 0:000 Patching DSDT: 25:161 0:000 - [Rename _OSI to XOSI]: pattern 5F4F5349, patched at: [ (AD06) (889B) (3) (11) (18) (1C) (1C) (1A) (18) (18) (18) (18) ] 25:161 0:000 - [Rename HDAS to HDEF]: pattern 48444153, patched at: [ (2E7) (12) (12) (BD7E) (157F) (84) (D) (2B) (32) (4F) (6F) (C3) (15866) ] 25:161 0:000 - [Rename SAT0 to SATA]: pattern 53415430, patched at: [ (329) (16) (D) (16) (16) (D) (16) (16) (D) (16) (D4EF) (30) (12471) (1501) (4E2) (2A) (29) (2E) (2E) (2E) ] 25:161 0:000 - [Rename H_EC to EC]: pattern 485F4543, patched at: [ (2D1) (2D6) (CEB6) (10) (534A) (1B) (15) (14) (139) (15) (25) (22) (15) (763) (16) (16) (33) (185) (9A) (A9C) (12) (F) (29) (12) (F) (2322) (14) (13A) (14) (CBC6) (1F) (24) (25) (57) (12) (10) (1D) (12) (10) (1B) (11) (1C) (11) (48D) (516) ] 25:161 0:000 first CPU found at A9BD offset A9C0 25:161 0:000 score candidate at A9B9 25:161 0:000 score inserted in acpi_cpu_score _PR_ 25:161 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_ 25:162 0:000 Found PCIROOTUID = 0 25:162 0:000 Start RTC Fix 25:162 0:000 found RTC Length not match, Maybe will cause CMOS reset will patch it. 25:162 0:000 found RTC had IRQNoFlag will move -3 bytes 25:162 0:000 ...len=24625 25:162 0:000 new size written to 2345A shift=0 len=24625 25:162 0:000 len after correct outers 24625 25:163 0:000 Start SBUS Fix PCI=377D len=24625 25:163 0:000 device (SBUS) found at C38D 25:163 0:000 _DSM in SBUS already exists, dropped 25:163 0:000 SBUS code size fix = 0x0000005E 25:163 0:000 deleting device CRT_ 25:163 0:000 deleting device DVI_ 25:164 0:000 deleting device SPKR 25:164 0:000 deleting device ECP_ 25:165 0:000 deleting device LPT_ 25:165 0:000 deleting device FDC0 25:165 0:000 deleting device ECP1 25:166 0:000 deleting device LPT1 25:166 0:000 deleting device EPC_ 25:167 0:000 Start Darwin Fix 25:167 0:000 Start SHUTDOWN Fix len=245C7 25:167 0:000 === [ ACPIDropTables ] ==================================== 25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuSsdt Length=3806 25:167 0:000 Xsdt has tables count=20 25:167 0:000 Table: SSDT CpuSsdt 3806 dropped 25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=xh_rvp08 Length=2607 25:167 0:000 Xsdt has tables count=19 25:167 0:000 Table: SSDT xh_rvp08 2607 dropped 25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=PegSsdt Length=9163 25:167 0:000 Xsdt has tables count=18 25:167 0:000 Table: SSDT PegSsdt 9163 dropped 25:167 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=SataTabl Length=887 25:167 0:000 Xsdt has tables count=17 25:167 0:000 Table: SSDT SataTabl 887 dropped 25:167 0:000 === [ PatchAllSSDT ] ====================================== 25:167 0:000 Patch table: SSDT SaSsdt len=0x3154 25:167 0:000 0. [Rename _OSI to XOSI]: pattern 5F4F5349, bin not found / already patched! 25:167 0:000 1. [Rename HDAS to HDEF]: pattern 48444153, bin not found / already patched! 25:167 0:000 2. [Rename SAT0 to SATA]: pattern 53415430, bin not found / already patched! 25:167 0:000 3. [Rename H_EC to EC]: pattern 485F4543, bin not found / already patched! 25:167 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 25:167 0:000 Xsdt has tables count=16 25:167 0:000 === [ ACPIPatchedAML ] ==================================== 25:167 0:000 Sorted 25:167 0:000 Inserting table[0]:SSDT-2-PegSsdt.aml from EFI\CLOVER\ACPI\patched ... Success 25:168 0:000 Inserting table[1]:SSDT-3-UsbFix.aml from EFI\CLOVER\ACPI\patched ... Success 25:168 0:000 Inserting table[2]:SSDT-5-eGpu.aml from EFI\CLOVER\ACPI\patched ... Success 25:168 0:000 Inserting table[3]:SSDT-6-Xosi.aml from EFI\CLOVER\ACPI\patched ... Success 25:169 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1 25:169 0:000 Maximum control=0x28 25:169 0:000 Turbo control=0x2A 25:169 0:000 P-States: min 0x8, max 0x2A 25:169 0:000 SSDT with plugin-type without P-States is generated 25:169 0:000 SSDT with CPU C-States generated successfully 25:169 0:000 === [ RestSetup macOS ] =================================== 25:169 0:000 EdidDiscovered size=128 25:169 0:000 Inject EDID 25:169 0:000 ------- EDID Table 25:169 0:000 000 | 00 FF FF FF FF FF FF 00 1E 6D 25:169 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 04 25:169 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E 25:169 0:000 030 | A3 26 0F 50 54 21 08 00 71 40 25:169 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 00 25:169 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 70 25:169 0:000 060 | 3E 80 30 20 65 0C 58 54 21 00 25:169 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 80 25:169 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A 25:169 0:000 090 | 00 00 00 FD 00 30 3D 87 87 38 25:169 0:000 100 | 01 0A 20 20 20 20 20 20 00 00 25:169 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 72 25:169 0:000 120 | 61 20 48 44 0A 20 01 0F 25:169 0:000 VendorID = 0x1E6D 25:169 0:000 ProductID = 0x5B09 25:169 0:000 ------- New EDID Table 25:169 0:000 000 | 00 FF FF FF FF FF FF 00 6D 1E 25:169 0:000 010 | 09 5B 65 BC 05 00 09 1A 01 04 25:169 0:000 020 | B5 3C 22 78 9F 30 35 A7 55 4E 25:169 0:000 030 | A3 26 0F 50 54 21 08 00 71 40 25:169 0:000 040 | 81 80 81 C0 A9 C0 D1 C0 81 00 25:169 0:000 050 | 01 01 01 01 4D D0 00 A0 F0 70 25:169 0:000 060 | 3E 80 30 20 65 0C 58 54 21 00 25:169 0:000 070 | 00 1A 28 68 00 A0 F0 70 3E 80 25:169 0:000 080 | 08 90 65 0C 58 54 21 00 00 1A 25:169 0:000 090 | 00 00 00 FD 00 30 3D 87 87 38 25:169 0:000 100 | 01 0A 20 20 20 20 20 20 00 00 25:169 0:000 110 | 00 FC 00 4C 47 20 55 6C 74 72 25:169 0:000 120 | 61 20 48 44 0A 20 01 0F 25:169 0:000 ATI injection not set 25:169 0:000 RCBA disabled; cannot use it 25:169 0:000 stringlength = 886 25:169 0:000 CurrentMode: Width=3840 Height=2160 25:169 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BFDEF18 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 8BFDEF18 25:176 0:006 Use origin smbios table type 1 guid. 25:187 0:011 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 25:187 0:000 Extra kext: EFI\CLOVER\kexts\Other\AMD9xxxControllerPatcher.kext 25:189 0:001 Extra kext: EFI\CLOVER\kexts\Other\Z270-USB.kext 25:190 0:001 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext 25:193 0:002 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext 25:194 0:001 |-- PlugIn kext: EFI\CLOVER\kexts\Other\FakeSMC.kext\Contents\PlugIns\W836x.kext 25:195 0:001 Extra kext: EFI\CLOVER\kexts\Other\AppleIGB.kext 25:198 0:002 Extra kext: EFI\CLOVER\kexts\Other\EFICheckDisabler.kext 25:200 0:002 Extra kext: EFI\CLOVER\kexts\Other\IntelMausiEthernet.kext 25:203 0:003 SetStartupDiskVolume: 25:203 0:000 * Volume: 'HIGH_SIERRA_PCIe' 25:203 0:000 * LoaderPath: '' 25:203 0:000 * DevPath: HIGH_SIERRA_PCIe 25:203 0:000 * GUID = 535A8AC0-AEB6-4C9B-8216-FC10937ADE34 25:204 0:000 * efi-boot-device: IOMatchIOProviderClassIOMediaIOPropertyMatchUUID535A8AC0-AEB6-4C9B-8216-FC10937ADE34 25:204 0:000 Custom boot screen not used because entry has unset use graphics It appears many of my changes were not properly/faithfully applied to the sourceforge sources. 2 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527138 Share on other sites More sharing options...
tluck Posted November 2, 2017 Share Posted November 2, 2017 It appears many of my changes were not properly/faithfully applied to the sourceforge sources. seems to be the case. I took your AcpiPatcher.c file (https://raw.githubusercontent.com/RehabMan/Clover/master/rEFIt_UEFI/Platform/AcpiPatcher.c) and removed this section: if (gSettings.NoDynamicExtract) { return; } Dropped into 4286 - it compiled and runs just fine. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/602/#findComment-2527196 Share on other sites More sharing options...
Recommended Posts