blayze® Posted June 6, 2017 Share Posted June 6, 2017 fakecpuid 0x0506e3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437119 Share on other sites More sharing options...
Sherlocks Posted June 6, 2017 Share Posted June 6, 2017 fakecpuid 0x0506e3Remove id and try vanilla.10.13 has kabylake model imac18.1, 18.3 나의 LG-F800S 의 Tapatalk에서 보냄 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437122 Share on other sites More sharing options...
Guest ricoc90 Posted June 6, 2017 Share Posted June 6, 2017 Yep. So the culprit was the USB drive installer method. Apparently, it doesn't work anymore as it did with Sierra. I guess will find out why in the coming days/weeks. Other than that, I just used Sherlock's v2 to replace 0479, and upgraded to High Sierra from within Sierra (from the Application folder). Pretty straight forward. No need to add anything in Clover config with this Clover version. Big thank you from my side! I installed it through the USB method. Didn't work at first (I kept getting firmware errors, kextd stall on AppleACPICPU (no kext injection?), and missing or damaged OSInstall.mpkg errors but with Sherlocks BOOTX64 and CLOVERX64 it went without a hitch... Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437125 Share on other sites More sharing options...
bs0d Posted June 6, 2017 Share Posted June 6, 2017 I don't want to do a direct update from Sierra to high Sierra. I have FileVault 2 enabled. With the new apfs, FileVault 2 is not supported, nor it is necessary. I wonder how good the converting tool is working. I have about 20TB of encrypted files on HFS+. Any report on that? supposedly apfs is worse than hfs for rotational disks, unsure of this since apple still use rotational disks as part of the fusion disks. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437133 Share on other sites More sharing options...
smolderas Posted June 6, 2017 Share Posted June 6, 2017 supposedly apfs is worse than hfs for rotational disks, unsure of this since apple still use rotational disks as part of the fusion disks. Why would it be worse than hfs? It has all those juicy features, like zfs... Edit: I'm sorry, I know it is not the correct place to discuss this. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437134 Share on other sites More sharing options...
Max.1974 Posted June 7, 2017 Share Posted June 7, 2017 Sherlocks tks for your help, i can install only from hd in second SSD partition, so im have a problem: after boot with clover 4081, just few minutes and simple shutdown or turn off system. What could be? Please tks for everything!!! Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437217 Share on other sites More sharing options...
evil_pro Posted June 7, 2017 Share Posted June 7, 2017 Interesting issues here. I managed to upgrade my Sierra installation just fine thanks to Sherlocks' work but now when booting macOS everything is fine in verbose mode but as soon as it switches to GUI mode it reboots. Never had this with Sierra. System: CPU: Intel Core i5-6600k Mainboard: ASUS Z170 Pro Gaming Graphics Card: Nvidia GeForce GTX 760 I'd like to thank everyone in this thread as your work got me even that far and appreciate any help with this final issue. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437230 Share on other sites More sharing options...
Max.1974 Posted June 7, 2017 Share Posted June 7, 2017 Error after boot pos install with clover 4081 Any idea? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437233 Share on other sites More sharing options...
evil_pro Posted June 7, 2017 Share Posted June 7, 2017 Interesting issues here. I managed to upgrade my Sierra installation just fine thanks to Sherlocks' work but now when booting macOS everything is fine in verbose mode but as soon as it switches to GUI mode it reboots. Never had this with Sierra. System: CPU: Intel Core i5-6600k Mainboard: ASUS Z170 Pro Gaming Graphics Card: Nvidia GeForce GTX 760 I'd like to thank everyone in this thread as your work got me even that far and appreciate any help with this final issue. Okay I think I know what I messed up. I just installed High Sierra on another partition and it doesn't crash on GUI output. My guess is that the problem is caused by the Nvidia Web Drivers which were installed before I upgraded. Could someone please be so kind and tell me which files I need to remove to get rid of the web driver? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437247 Share on other sites More sharing options...
Kynyo Posted June 7, 2017 Share Posted June 7, 2017 Thank you entire community for this great project. Still buggy as I see this High Sierra. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437248 Share on other sites More sharing options...
abdouoi Posted June 7, 2017 Share Posted June 7, 2017 Thank you for the awesome work! Is it safe to upgrade to APFS? Does the latest clover from Sherlock support APFS? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437256 Share on other sites More sharing options...
crazybirdy Posted June 7, 2017 Share Posted June 7, 2017 Interesting issues here. I managed to upgrade my Sierra installation just fine thanks to Sherlocks' work but now when booting macOS everything is fine in verbose mode but as soon as it switches to GUI mode it reboots. Never had this with Sierra. System: CPU: Intel Core i5-6600k Mainboard: ASUS Z170 Pro Gaming Graphics Card: Nvidia GeForce GTX 760 I'd like to thank everyone in this thread as your work got me even that far and appreciate any help with this final issue. So sad, now I can only boot to 10.13 system (Sierra HD dmg) with Enoch, get reboot with Clover. The createinstallmedia USB installer gets reboot with Enoch and Clover. But MBR installer boot fine with Clover and Enoch, and still get OSInstall.mpkg error with it. I think, my hardware (E8400) is going to die..........for High Sierra... It's time to update to 7xxx cpu now. ---- update.. Now, I can complete the two steps installation with createinstallmedia USB installer and Clover 4082, boot to system fine. The old MB+CPU are still alive with High Sierra now. :thumbsup_anim: 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437257 Share on other sites More sharing options...
Sherlocks Posted June 7, 2017 Share Posted June 7, 2017 Thank you for the awesome work! Is it safe to upgrade to APFS? Does the latest clover from Sherlock support APFS?I use apfs now. More fast than hfs+ when install macos. 나의 LG-F800S 의 Tapatalk에서 보냄 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437260 Share on other sites More sharing options...
abdouoi Posted June 7, 2017 Share Posted June 7, 2017 I use apfs now. More fast than hfs+ when install macos. 나의 LG-F800S 의 Tapatalk에서 보냄 So I just need your latest clover to get APFS working ? No additional files? Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437266 Share on other sites More sharing options...
Sherlocks Posted June 7, 2017 Share Posted June 7, 2017 So I just need your latest clover to get APFS working ? No additional files?Search apfs.efi file in this thread.Then put it in x64uefi folder in clocer 나의 LG-F800S 의 Tapatalk에서 보냄 1 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437269 Share on other sites More sharing options...
galile7621 Posted June 7, 2017 Share Posted June 7, 2017 Yep. So the culprit was the USB drive installer method. Apparently, it doesn't work anymore as it did with Sierra. I guess will find out why in the coming days/weeks. Other than that, I just used Sherlock's v2 to replace 0479, and upgraded to High Sierra from within Sierra (from the Application folder). Pretty straight forward. No need to add anything in Clover config with this Clover version. Big thank you from my side! Can you share me what kexts you are using? I follow your step but it's not luck. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437278 Share on other sites More sharing options...
arsradu Posted June 7, 2017 Share Posted June 7, 2017 Can you share me what kexts you are using? I follow your step but it's not luck. I don't think it's about the kexts. What error are you getting? Did you replace whichever Clover you had before with the one from Sherlock's post above? Do you have APFS.efi in your drivers folder? Anyway, I attached the kexts I'm using. But keep in mind that you might need different ones...assuming it's a kext problem. Which I'm not so sure it is. I still don't have sound in High Sierra. But I'm assuming that's because some of the kexts are not yet updated. That's not a problem, since this is not my main system. However, it should at least boot with these. My_Kexts.zip Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437283 Share on other sites More sharing options...
Mork vom Ork Posted June 7, 2017 Share Posted June 7, 2017 First of all I want to thank all involved people, who made HIGH_SEIRRA possible on all our Hackintosh-Machines. W/O your encourage and engagement it won't be possible. <--- THANX TO ALL OF YOU. Secondly i want to give feedback on what i have found out so far by using HIGH_SIERRA in cooperation with my AMD RX480 GFX. So here are my impressions: The first thing you have to do when booting for the first time macOS 10.13: deselct "Inject ATI" within your config.plist. This is neccesarry to be informed, which AMDController kext will be used by HIGH_SIERRA in conjunction with your card. Next step: get a list of all the Framebuffers inside the desired AMDController.kext. You could use the attached script by using "php " and dragging the script onto terminalwindow and press "Enter". Now see, which Framebuffer matches best to your card. For the RX480 in my case it was AMD9500Controller.kext and ORINOCO as Framebuffer. For my Sapphire RX480 NITRO OC Framebuffer ORINOCO matches perfectly - so there is not need to be patched. BUT: when i setup my config.plist with the desired values and i first booted my machine, the result was as in SIERRA: black screen after verbose boot! Damn it! Next thing i tried: reboot, but within CLOVER Bootmenu i selected Options - Graphicoptions - FakeID for GFX set to 0x67EF1002 and rebooted. This time the Boot was succesfull, i reached the dektop - but still no accelleration. Anything else is working fine so far. But there is one more: only Monitor at port one (Displayport) was recognized by the Framebuffer, even all the other connectors where detected right: 2x DP, 2x HDMI and one DVI-I. So back to the table for finetuning. Will report back, if i will have new summits to be reported. EDIT#1: all monitors and connectors now working. This is what i did: make a copy of desired AMD9xxxController.kext. Klick right "Show Packeage Content" and open the "info.plist" file. Look for your used Framebuffer - remember mine was ORINOCO. Make the following entry: "CFG_USE_AGDC" boolean "NO". Thats it, reboot, et voila: all connectors are working now as expected. ATI_FrameBuffers_Sierra_Edition.php.zip 3 Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437287 Share on other sites More sharing options...
Kynyo Posted June 7, 2017 Share Posted June 7, 2017 I use apfs now. More fast than hfs+ when install macos. 나의 LG-F800S 의 Tapatalk에서 보냄 @ Sherlocks Hello! Could you help a bit, please? I didn't managed to boot the OS. Nor SUB installer nor premade disk image. Everytime i get this! System from signature. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437293 Share on other sites More sharing options...
Ricky1994 Posted June 7, 2017 Share Posted June 7, 2017 my haswell latop shows acpiplatform error.. i find others's haswell shows the same error .bad luck ,is there any solution？ my hardware :i5 4210m hd4600+gt840m Search apfs.efi file in this thread.Then put it in x64uefi folder in clocer나의 LG-F800S 의 Tapatalk에서 보냄 hi,haswell has acpiplatform error..what should i do？ Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437295 Share on other sites More sharing options...
vusun123 Posted June 7, 2017 Share Posted June 7, 2017 my haswell latop shows acpiplatform error.. i find others's haswell shows the same error .bad luck ,is there any solution？ my hardware :i5 4210m hd4600+gt840m hi,haswell has acpiplatform error..what should i do？ This is a clover developing thread, not a Q&A thread Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437299 Share on other sites More sharing options...
galile7621 Posted June 7, 2017 Share Posted June 7, 2017 I don't think it's about the kexts. What error are you getting? Did you replace whichever Clover you had before with the one from Sherlock's post above? Do you have APFS.efi in your drivers folder? Anyway, I attached the kexts I'm using. But keep in mind that you might need different ones...assuming it's a kext problem. Which I'm not so sure it is. I still don't have sound in High Sierra. But I'm assuming that's because some of the kexts are not yet updates. That's not a problem, since this is not my main system. However, it should at least boot with these. I get stuck and Installer screen, when I choose "Install new macOS" and continue... I use clover 4081, already put apfs.efi in drive64uefi. Edit: I mean if I use createinstaller USB, I get that error. But If update directly from application folder, I got ACPICPU ) Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437304 Share on other sites More sharing options...
arsradu Posted June 7, 2017 Share Posted June 7, 2017 I get stuck and Installer screen, when I choose "Install new macOS" and continue... I use clover 4081, already put apfs.efi in drive64uefi. Edit: I mean if I use createinstaller USB, I get that error. But If update directly from application folder, I got ACPICPU ) Well, if you got to the installer screen, your problem is most likely not the kexts. Could you, please, take a screenshot of the screen you get stuck to? Did you make the USB drive using the createinstallmedia method? Is your config.plist the same one for both your main installation (on the HDD/SSD) and the USB one? Are you using the exact same drivers? Are you booting with Clover r4081? If you go with the direct upgrade, make sure you boot with the correct Clover version. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437307 Share on other sites More sharing options...
galile7621 Posted June 7, 2017 Share Posted June 7, 2017 Well, if you got to the installer screen, your problem is most likely not the kexts. Could you, please, take a screenshot of the screen you get stuck to? Did you make the USB drive using the createinstallmedia method? Yes i use createinstallmedia method, i get stuck here after click Continue.The speed before is very slow. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437310 Share on other sites More sharing options...
nahive Posted June 7, 2017 Share Posted June 7, 2017 Yes i use createinstallmedia method, i get stuck here after click Continue. The speed before is very slow. I have the same issue. Also if I click on Disk Utilitity it just keeps loading disks and not loading. Link to comment https://www.insanelymac.com/forum/topic/284656-clover-general-discussion/page/522/#findComment-2437311 Share on other sites More sharing options...
Recommended Posts