macq Posted July 17, 2011 Share Posted July 17, 2011 did anybody tried to install Lion on any HP DV computer ? if so what was needed? I have, follow for maldons guide, not everything is working, for example sound is not working. But is OK for get a feeling how it would be //Peter Same here,, Maldon method works for Lion install,but boot only possible with cpus=1(stupid HP bios),no sound,brightness kext loads but is not implemented, Mostly things that work with snow are roundabout working,obviously needs a lot of fine tuning. P.S. :Even with 10.6.8 my brightness slider is gone and I need Graphics enabler=yes for proper resolution which was not the case with 10.6.7.I used Taptuns kernel and the sound is still not working even in 10.6.8.Anyone care to help out on that. @Taptun, How do we use your AppleHDA.kext ,cos for me it does not work in either S/L/E or E/E?!! Your previous patch works just fine till 10.6.7 Link to comment Share on other sites More sharing options...
chrispypatt Posted July 17, 2011 Share Posted July 17, 2011 I updated to 10.6.8 and switched the appleHDA.kext so now I got sound working but I noticed my graphics card is not registring right it comes up in the system profiler as this: Display: Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 7 MB Vendor: NVIDIA (0x10de) Device ID: 0x0a28 Revision ID: 0x00a2 Displays: Display: Resolution: 1920 x 1080 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Can someone tell me how to get my graphics card working again? I have a NVIDIA geforce 230 M Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 18, 2011 Share Posted July 18, 2011 i am installing lion and work just fine it is much faster than lion.sound not working i am replace applehda.kext with taptun 10.6.8. my brightness can be change with fn key . Link to comment Share on other sites More sharing options...
oskr66 Posted July 19, 2011 Share Posted July 19, 2011 I just installed LION , everything works ....... Sleep , : it works with new kext , closing screen puts system to sleep , opening , wakes system wireless Wi-Fi, : it works , no problem sound : Is not perfect as before , but at least got audio , no input or mic Graphics : Full resolution now all we need is a modified Kernel to fix the CPUS=1 Busratio:12 Lapic problem computer runs only on one core I hope we can have the kernel soon ....... not sure who can come thru with this , but I hope we can find the answer Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 19, 2011 Share Posted July 19, 2011 Hi mammoth i want to know how can i patch AppleHDA for IDT 92HD75B3X5 can you help me?? I have an ATI SBx00 Azalia(Intel HDA) for internal audio with dev id 0x43831002 and for HDMI i have an ATI RV710/730 with dev id 0xaa381002. The hexadecimal identifier of my IDT Codec is 0x111D7603. Now i use VoodooHDA 2.7.2 but it makes my audio crackling and it doesn't mute speaker when i insert the jack for the headphones in the connector, i have to choose output audio device manual in system preferences. Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 19, 2011 Share Posted July 19, 2011 use the applehda 10.6.8 that taptun posted .just rename your layout id from 888 to 7603 in your legacyhda.and your dsdt.(your are in 10.6.8?) Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 19, 2011 Share Posted July 19, 2011 Yes i'm on osx 10.6.8 can you post me legacyHDA?? because i haven't it at the moment. And can you send me the complete dsdt mod to apply in my dsdt.aml?? Thank you Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 19, 2011 Share Posted July 19, 2011 Yes i'm on osx 10.6.8 can you post me legacyHDA?? because i haven't it at the moment. And can you send me the complete dsdt mod to apply in my dsdt.aml?? Thank you change your layout id like this "layout-id", Buffer (0x04) { 0xB3, 0x1D, 0x00, 0x00 }, and this is my idinjector .also its contain my mouse ,camera.and bluetooth id to recognize ,built-in apple.if your hardawre are same with me you can see that your webcam and bluetoth report as apple one.for mouse add your device id to mouse section. IDInjector.kext.zip Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 19, 2011 Share Posted July 19, 2011 It's similar because the IDT is in my Hackbook as you can see in my signature, but it can have some problems with ATI4600Controller with my device id in?? sorry for my bad english. But for the dsdt modify can you post your dsdt?? so i can see where to modify because this is my first modify in dsdt.aml Your IDinjector goes in Extra/Extensions or in System/Library/Extensions?? Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 20, 2011 Share Posted July 20, 2011 It's similar because the IDT is in my Hackbook as you can see in my signature, but it can have some problems with ATI4600Controller with my device id in?? sorry for my bad english. But for the dsdt modify can you post your dsdt?? so i can see where to modify because this is my first modify in dsdt.aml Your IDinjector goes in Extra/Extensions or in System/Library/Extensions?? yes put it to extra/extensions this contain device id for ati m 4650 so need to edit ati4600 plist anymore. and this is my dsdt find the hdef under pci0 put layout id id in hdef DSDT.aml___.zip Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 20, 2011 Share Posted July 20, 2011 Thank you but in system info i haven't information about sound, so can you check and modify my dsdt.aml, to see if i have done all good?? dsdt.aml.zip Link to comment Share on other sites More sharing options...
Peter_sm Posted July 20, 2011 Share Posted July 20, 2011 You with 2 HD, now you can use W7 disk as your primary disk and OSX on the secondary, so the backup works from W7 I installed a new feature from Chameleon on my W7 disk, the new thing is named boot0md More info here -> http://forum.voodooprojects.org/index.php/topic,2091.0.html Now we must get our HP laptops work in Lion as well //Peter Link to comment Share on other sites More sharing options...
PopoTheBest Posted July 20, 2011 Share Posted July 20, 2011 Sorry, I posted this in the old threat first ! So I try this here again Hi Mammoth, I saw your guides for DVx HP Notebooks. I am using a DV9314EA bought in France a couple of years ago. I saw in different threats that you had a kind of DV9000. But today you are using a DV8. I was wondering if I could use your guide for Mac OS X installation ??? If not, do you still have a Guide for my notebook ? It's a Intel based one with a Core 2 Duo T5300 Geoforce 7600 Go with 256 Mb of memory. I would be very gratefull if I could use my old HP for building iPad/iPhone applications ???? I thank you in advance for any help on this. Sorry if my english is not perfect, I'm french... Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 21, 2011 Share Posted July 21, 2011 your dsdt is correct.what bootloder your using if you using charm branch must put your dsdt in this path: Extra/Acpi to load. Link to comment Share on other sites More sharing options...
Zell Dinch Posted July 21, 2011 Share Posted July 21, 2011 I can't get sound to work. I modified the dsdt.aml and LegacyHDA. I replaced the AppleHDA. Still cannot work. Prior to 10.6.8, I had to use the IDT kext to get sound to work. Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 21, 2011 Share Posted July 21, 2011 I'm using chimera bootloader by tonymacx86 installed with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8.0. The DSDT loads because my notebook restart and switch off correctly withouth it, it don't switch off or restart. So what do i have to do?? Thank you for the reply great cyrus Link to comment Share on other sites More sharing options...
Nghia Developer Posted July 21, 2011 Share Posted July 21, 2011 Mammoth where are you now? We need you to create a guide to installing Lion Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 21, 2011 Share Posted July 21, 2011 I'm using chimera bootloader by tonymacx86 installed with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.8.0. The DSDT loads because my notebook restart and switch off correctly withouth it, it don't switch off or restart. So what do i have to do?? Thank you for the reply great cyrus so your dsdt is ok .just check that your kext has installed correctly and run repair premision. Link to comment Share on other sites More sharing options...
Leopard1993 Posted July 21, 2011 Share Posted July 21, 2011 I have installed AppleHDA by taptun in System/Library/Extensions with kext helper b7,your IDinjector in Extra/Extensions placed in it this folder and than i have run kext utility to repair permissions and to make the Extensions.mkext, and i've placed DSDT.aml in Extra folder and with chameleon prepfane i've added it to the com.apple.boot.plist. Help me great cyrus Link to comment Share on other sites More sharing options...
Peter_sm Posted July 21, 2011 Share Posted July 21, 2011 I have got AUDIO works in LION,but not 100% but I got sound anyway, installed oldest WoodooHDA version 0.2.1..... NOW we must get a working kext for the battery using a kext from SL , now the battery looks OK And a kernel to get all cores //Peter Link to comment Share on other sites More sharing options...
oskr66 Posted July 21, 2011 Share Posted July 21, 2011 Mammoth where are you now? We need you to create a guide to installing Lion I had installed LION on my Dv8 , no problems , everything works Camera Wi-Fi Wireless Sound : with voodoo kext , can't control volume , mic works , this needs upgrade Graphics at full resolution, have not tried to do the brightness + - FaceTime works All USB's work Created a new DSDT with auto patcher after installation with all fixes Battery works with voodoo battery kext Sleep works , : closing and opening screen wakes and sleeps with the latest sleepEnabler kext The only problem : it needs a new " Mach-Kernel" to fix the Lapic problem , since we can't start without the cpus=1 and the busratio=12 , making this awesome system run on only one core . so if we could get the Higher " GODS" to fix our kernel and fix our audio I could make an easy guide. UPDATE: Thanks to TapTun now we have anew Mach_kernel . Now we have all cores working . Awesome !! if you fallow this guide you will be able to install Lion on your system http://www.insanelymac.com/forum/index.php?showtopic=260594 hope it helps...... 1 Link to comment Share on other sites More sharing options...
Peter_sm Posted July 21, 2011 Share Posted July 21, 2011 I had installed LION on my Dv8 , no problems , everything works Sound : with voodoo kext , can't control volume , mic works , this needs upgrade hope it helps...... Hi, What version of voodoo kext are u using, could you attach this //Peter Link to comment Share on other sites More sharing options...
Peter_sm Posted July 21, 2011 Share Posted July 21, 2011 I have installed AppleHDA by taptun in System/Library/Extensions with kext helper b7,your IDinjector in Extra/Extensions placed in it this folder and than i have run kext utility to repair permissions and to make the Extensions.mkext, and i've placed DSDT.aml in Extra folder and with chameleon prepfane i've added it to the com.apple.boot.plist. Help me great cyrus With latest Chameleon, you need to change from com.apple.boot.plist to org.chameleon.Boot.plist And there are also some updates that you need to do in the SMBIOS.plist And update the prefpane as well Link to comment Share on other sites More sharing options...
Taptun Posted July 21, 2011 Share Posted July 21, 2011 Test kernel for Lion mach_kernel.zip @Taptun 1 Link to comment Share on other sites More sharing options...
Cyrus the Great Posted July 21, 2011 Share Posted July 21, 2011 I have installed AppleHDA by taptun in System/Library/Extensions with kext helper b7,your IDinjector in Extra/Extensions placed in it this folder and than i have run kext utility to repair permissions and to make the Extensions.mkext, and i've placed DSDT.aml in Extra folder and with chameleon prepfane i've added it to the com.apple.boot.plist. Help me great cyrus plz.can you post your bdmesg .i can not saying anything to you blindly. Test kernel for Lion mach_kernel.zip @Taptun thanks for your quick update Link to comment Share on other sites More sharing options...
Recommended Posts