Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 @Mohamed Khairy,It is looking nice, don't u find ? well, the good thing, is I only need to change something regarding the first state. Everything after will stick with correct values. I explain myself: even-though max_ratio is shown as 18, it is actually trying to yell: "am 17.5". and because every .5 adds 1... In other words, don't look at anything other than the max_freq value; it is right. once I get the correct max_ratio, I can correct it if need is (e.g.: when fsb is oc'ed). It took much time from us, but hey we are too close for just giving up. sure my dear thanks for this great work Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 not too fast, my explaining doesn't stick-in. I looked at your dumps again and there were nothing yelling at ".5" (other than my brain getting over-burned; nah what? I didn't give-up!) seriously, can u get a dump with a ".5" ratio ? also, there is something irritating here: if I start with the correct max_freq, I 'd have to resolve 2 unknown variables from it: Impossible. Even-though, I can divid max_freq by 200 (original fsb: guess work here) to get the correct max_multi. then we'd lose any possibility to get the correct fsb. maybe relying on tsc could do the trick. we'll see! Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 here is dump with 16.5*200 i think you want cpuz dump THE_KING.txt Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 no, sorry I wasn't precise, I'd need a bdmesg, to confirm that tsc could do the trick. btw, do it with crazy values (e.g.: busratio: "...5" & fsb "210"/"220") Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 no, sorry I wasn't precise,I'd need a bdmesg, to confirm that tsc could do the trick. btw, do it with crazy values (e.g.: busratio: "...5" & fsb "210"/"220") oh sorry 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 fsb: 194 min_ratio: 4P-State 0: Frequency: 3298, Multiplier: 17, vid: 16 P-State 1: Frequency: 1746, Multiplier: 9, vid: 24 P-State 2: Frequency: 970, Multiplier: 5, vid: 32 P-State 3: Frequency: 776, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 3298MHz CPU: FSBFreq: 194MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 and which values did u actually use ? I have no more magic powder around Edit: sorry Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 and which values did u actually use ?I have no more magic powder around like above 16.5*200 Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 btw, do it with crazy values (e.g.: busratio: "...5" & fsb "210"/"220") like above16.5*200 nah whatever Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 beta6 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 max_multi (corrected): 16 fsb: 206953756 min_ratio: 0 P-State 0: Frequency: -983707200, Multiplier: 16, vid: 16 P-State 1: Frequency: 1862583804, Multiplier: 9, vid: 24 P-State 2: Frequency: 1034768780, Multiplier: 5, vid: 32 P-State 3: Frequency: 0, Multiplier: 0, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=160, min=0 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3311MHz CPU: CPUFreq: -983707200MHz CPU: FSBFreq: 206953756MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 do you want me to retrun to beta5 and do 16.5*210 Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 beta7 on the road no need to return to beta5 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 beta7 on the roadno need to return to beta5 waiting Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 you can wait all night long if u want to, btw, what are u waiting for ? file was already sent Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 11, 2011 Share Posted January 11, 2011 you can wait all night long if u want to,btw, what are u waiting for ? file was already sent 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 max_multi (corrected): 17 fsb: 194 min_ratio: 4 P-State 0: Frequency: 3298, Multiplier: 17, vid: 16 P-State 1: Frequency: 1746, Multiplier: 9, vid: 24 P-State 2: Frequency: 970, Multiplier: 5, vid: 32 P-State 3: Frequency: 776, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 0MHz CPU: FSBFreq: 0MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 11, 2011 Author Share Posted January 11, 2011 ey ey ey! ok I give up for tonight. see ya next Link to comment Share on other sites More sharing options...
vbetts Posted January 12, 2011 Share Posted January 12, 2011 I'll try it out on my machine. Athlon II x3 435 DFI 790 DK lanparty 2gb ddr2 Geforce 9800GTX+ Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 sure, and thank u for suggesting it but keep in mind that it is in development phase and would not work like u want it to. if interested I can pm u oops, the code is not generalized yet: mostly intended for phenom & shangai Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 ey ey ey!ok I give up for tonight. see ya next 16*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 16 maxdiv: 1, currdiv: 2 min_freq: 800, max_freq: 3200 max_multi (corrected): 16 fsb: 200 min_ratio: 4 P-State 0: Frequency: 3200, Multiplier: 16, vid: 16 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 800, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=160, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3210MHz CPU: CPUFreq: 0MHz CPU: FSBFreq: 0MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 beta8 16*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 16 maxdiv: 1, currdiv: 2 min_freq: 800, max_freq: 3200 max_multi (corrected): 16 fsb: 200 min_ratio: 4 P-State 0: Frequency: 3200, Multiplier: 160, vid: 16 P-State 1: Frequency: 1800, Multiplier: 9, vid: 24 P-State 2: Frequency: 1000, Multiplier: 5, vid: 32 P-State 3: Frequency: 0, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=160, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3210MHz CPU: CPUFreq: 3200MHz CPU: FSBFreq: 200MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 ok, I see only min_freq didn't stick-in should be 800 whenever it is less than 800 Link to comment Share on other sites More sharing options...
Mohamed Khairy Posted January 12, 2011 Share Posted January 12, 2011 16.5*200 CPU: AMD Phenom(tm) II X4 955 Processor max_multi: 17 maxdiv: 1, currdiv: 2 min_freq: 825, max_freq: 3300 max_multi (corrected): 17 fsb: 194 min_ratio: 4 P-State 0: Frequency: 3298, Multiplier: 170, vid: 16 P-State 1: Frequency: 1746, Multiplier: 9, vid: 24 P-State 2: Frequency: 970, Multiplier: 5, vid: 32 P-State 3: Frequency: 0, Multiplier: 4, vid: 46 CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1 CPU: Model/ExtModel/Stepping: 0x4/0x0/0x2 CPU: Multipliers x10: max=170, min=40 CPU: MaxDiv/CurrDiv: 0x1/0x1 CPU: TSCFreq: 3311MHz CPU: CPUFreq: 3298MHz CPU: FSBFreq: 194MHz CPU: NoCores/NoThreads: 1/4 CPU: Features: 0x36900221 good dreams to you too see you after tomorrow Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 see ya soon, and good luck for the exams @vbetts, you would probably need an special kernel for things to work correctly Link to comment Share on other sites More sharing options...
Liquid Ice Posted January 12, 2011 Share Posted January 12, 2011 Hi there, I have one question, what is the significant difference of this bootloader compared to the rc5 release that have p-states and c-states? I am using Kabyl's bootloader with my ATI 5850 on a P45-UD3L motherboard with Q9550 CPU. Are there any advantages this bootloader would have on my system ? Thank you for your answer in advance. Link to comment Share on other sites More sharing options...
mitch_de Posted January 12, 2011 Share Posted January 12, 2011 For my knowledge most diff to RC5 is, that you can config the Pstates gen by setting an Limit for fastest Pstate (eg 1, default 0) or count of Pstates. Also CState Gen has some config keys whoch Cstate will generate automatic. And keys setting MaxVolt and adding some mVolts to each Pstate VID (that part needs some work, not really working). Summary: valv way , config more details of Pstate Gen (which Pstates+VIDs) ist great if you OC - mostly the autogen Pstates (RC5+valv default) VIDs (mVolts) are little less and may end in KP or freezes on OCed CPUs. Link to comment Share on other sites More sharing options...
wojnar0 Posted January 12, 2011 Share Posted January 12, 2011 @wojnar,I need to ask: are u oc'ing your machine(bios) ? No, it is impossible. On the CPU screenshot are the highest values. speed is biger becouse multiplier was moving from 12.5 to 13. Link to comment Share on other sites More sharing options...
valv Posted January 12, 2011 Author Share Posted January 12, 2011 @mitch_de & Liquid Ice, well, anval is more than that for best description take a look at change-logs (first post), or even better: read BootHelp (on first post). btw, thank u mitch_de but regarding the "more" key, I thought it'd been fixed on last versions. Did u tried newer releases. @wojnar0, I pm'ed u one beta version that should fix things (or maybe not ) Link to comment Share on other sites More sharing options...
Veacheslav Posted January 12, 2011 Share Posted January 12, 2011 valv It is realy necessary to install this boot file on mac partition or I should just copy it? If I am using patched DSDT for sound there are any kind of problems with "compatibility" with your boot file? I ask you, cauze I tryied to just copy the boot file to mac partition and I always get a KP. Link to comment Share on other sites More sharing options...
Recommended Posts