mmk Posted May 18, 2006 Share Posted May 18, 2006 I'am still confused, i mean can i get QE + CI working on an ati radeon 7000 igp mobility or not, and am i also suppose to edit the whole ati9500kext.And qe+ci or opengl whatever, will it improve the speed of the graphic effects, for like dashboard? ATIRadeon9700.kext is for radeons > 9550 You have 7000 mobility .... you can edit them as you like, it won;t do {censored} for you. CI cannot work on your radeon because you don;t have the hardware for it. QE can work ..... but nobody yet knows how it works on old powerbooks with radeon cards ) Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115002 Share on other sites More sharing options...
hodgeman Posted May 18, 2006 Share Posted May 18, 2006 Thanks OMNI Radeon Mobility 9600 working at 1400x1050@60 I get the occasional garbled screen, no worrries though. 10.4.6 with IO80211.kext, and ATIRadeon9700GA.plugin from 10.4.5, and 003 Callisto. Not using CI/QE (it works fine, just don't like the tearing) The only issue I have is DVD player crashes. It was working before I installed Callisto. I didn't check this again before I installed iLife 05, so I don't know if anything iLife installed is causing it. q1- Do you need CI/QE for proper DVD playback? q2 - If not a CI/QE problem, is anyone else having a similar issue? q3 - Would iLife's DVD stuff cause this issue? Thanks to all for their hard work with this project. I just ordered my MacBook, based off the usage of OSX, which was made available by the people in this forum, and Maxxuss. I would have never ordered it without being able to dabble with OS X on my old laptop. :-) HM Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115009 Share on other sites More sharing options...
quietglow Posted May 18, 2006 Share Posted May 18, 2006 Quick question: I have an x300 and don't know when ATIRadeon GA to edit for QE/CI. 9700? Could someone who has acceleration working with a x300 gimme a hint? Thanks! Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115028 Share on other sites More sharing options...
Axix Posted May 18, 2006 Share Posted May 18, 2006 Thanks Omni I use 1280x1024 Resolution and DVI connection it works perfect //Axix Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115070 Share on other sites More sharing options...
munky Posted May 18, 2006 Share Posted May 18, 2006 *** Attention X1000-series owners: *** A user by the name of borisbadenov claims to have got Apple's own X1000-series kexts to work and give him full res changing (and no mouse tearing!) on his X1600 card: http://forum.osx86project.org/index.php?showtopic=17767 Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115087 Share on other sites More sharing options...
MacBlac Posted May 19, 2006 Share Posted May 19, 2006 No luck for us X1800XT owners on either front... As for Callisto, it shows 8MB vram (total) in the sys profile, so perhaps that is related to the crash when attempting to set a resolution. It does correctly idenify the card in name, just not memory it seems. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115486 Share on other sites More sharing options...
cyclonefr Posted May 19, 2006 Share Posted May 19, 2006 b004 is out same black screen with out of sync, if anyone get rid with this version of the 1/3time working let me no! Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115709 Share on other sites More sharing options...
Peter Gammelgaard Posted May 19, 2006 Share Posted May 19, 2006 004 don't work for me.. I get a black screen on my radeon xpress 200.. But 003 works fine.. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115713 Share on other sites More sharing options...
pauℓzurrr. Posted May 19, 2006 Share Posted May 19, 2006 004 doesnt seems to work here to, but i finds my card like 003 only when i come to the desktop i get a black screen. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115742 Share on other sites More sharing options...
munky Posted May 19, 2006 Share Posted May 19, 2006 anyone had success with X1000-series with 004? Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115745 Share on other sites More sharing options...
kday Posted May 19, 2006 Share Posted May 19, 2006 I get black screen with ATI Radeon Mobility 9600. Reverted back to 003. For those who need Build 003, file is attached. [Mod edit: Driver removed at request of developer] Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115754 Share on other sites More sharing options...
pocos Posted May 19, 2006 Share Posted May 19, 2006 yes ! succcess Radeon X1600 PRO (AGP): Modello Chipset: Radeon X1600 PRO (AGP) Tipo: Monitor Bus: PCI VRAM (totale): 512 MB Fornitore: ATI (0x1002) ID dispositivo: 0x71c2 ID revisione: 0x0000 Monitor: Monitor: Risoluzione: 1024 x 768 @ 60 Hz Profondità: Colore 32-bit Core Image: Supportato Monitor principale: Sì Mirror: Spento Online: Sì Quartz Extreme: Supportato callisto + changed "ioframebuffer" to "callistoFB" in ATIRadeonX1000GA.plugin bat there is a problem, this from my console: May 19 19:37:15 localhost kernel[0]: Callisto: ATOM ATI BIOS detected May 19 19:37:15 localhost kernel[0]: Callisto: Retreived PLL infos from BIOS May 19 19:37:15 localhost kernel[0]: Callisto: Reference=27.00 MHz (RefDiv=13) Memory=405.00 Mhz, System=500.00 MHz May 19 19:37:15 localhost kernel[0]: Callisto: PLL min 0 max 110000 May 19 19:37:15 localhost kernel[0]: Callisto: Port[0]: DDC: N/C, DAC: Primary, TMDS: Internal, Connector: Proprietary May 19 19:37:15 localhost kernel[0]: Callisto: Port[1]: DDC: N/C, DAC: TVDAC, TMDS: Internal, Connector: CRT May 19 19:37:15 localhost kernel[0]: Callisto: No connector info table detected May 19 19:37:15 localhost kernel[0]: Callisto: Connection on port 1 not detected, assuming CRT (cross your fingers) May 19 19:37:15 localhost kernel[0]: Callisto: Found Monitor: CRT May 19 19:37:15 localhost kernel[0]: Callisto: done with Radeon X1600 PRO (AGP) ....i have a DVI connected ... mouse problem not resolved, resolution switch create same problems sorry for bad english Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115755 Share on other sites More sharing options...
kday Posted May 19, 2006 Share Posted May 19, 2006 yes ! succcess Radeon X1600 PRO (AGP): If you haven't tried already, I would use the boris method with the default ATI drivers. This way you will get full support Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115758 Share on other sites More sharing options...
pocos Posted May 19, 2006 Share Posted May 19, 2006 i have tried boris method, bat no succes, i have an X1600pro Agp i have trired new callisto 004 end partially success ... sorry for english of course Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115765 Share on other sites More sharing options...
cyclonefr Posted May 19, 2006 Share Posted May 19, 2006 what is ur problem pocos? Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115804 Share on other sites More sharing options...
MacBlac Posted May 19, 2006 Share Posted May 19, 2006 anyone had success with X1000-series with 004? Almost... It no longer crashes on resolution change, but now I get a garbled screen. At least its heading in the right direction, seems like a monitor detection issue at this point. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115809 Share on other sites More sharing options...
drdaz Posted May 19, 2006 Share Posted May 19, 2006 Not that I care, but I think you should probably remove the link to Callisto b003. omni has specifically said he doesn't want it hosted elsewhere. /drdaz Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115817 Share on other sites More sharing options...
kday Posted May 19, 2006 Share Posted May 19, 2006 Not that I care, but I think you should probably remove the link to Callisto b003. omni has specifically said he doesn't want it hosted elsewhere. /drdaz Well, Build 003 is not hosted on his site anymore, and someone asked for it. I am not going to remove the link. omni will live. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115837 Share on other sites More sharing options...
drdaz Posted May 19, 2006 Share Posted May 19, 2006 Well, Build 003 is not hosted on his site anymore, and someone asked for it. I am not going to remove the link. omni will live. Well whatever. The chap has a bit of a fragile temper I've noticed, and he claims the reason for not leaving the old versions up is to help with debugging. Not saying I agree with his approach to this thing, just trying to keep things sweet until the driver works well. *Shrugs* Much as it would be strange and perverse to do so he could probably claim a DMCA violation on it seeing as he hasn't opened the source. Again... no skin off my back unless he throws a fit and decides to drop development. /drdaz Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115857 Share on other sites More sharing options...
sheriffbounce Posted May 19, 2006 Share Posted May 19, 2006 i would remove the link... what u do is what omni doesn't want!!! especially while he has his own driver forum and clearly stated not to host the driver anywhere else... at the end such a silly move like hosting the driver here could finish the driver development like omni wrote... just think for one second dude! Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115863 Share on other sites More sharing options...
jjoe Posted May 19, 2006 Share Posted May 19, 2006 Ati mobility 9600 AGP 64mb, Mac OS X 10.4.6 - get a black screen in b004, even after reboot. - work fine in b003. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115877 Share on other sites More sharing options...
MikeBee Posted May 19, 2006 Share Posted May 19, 2006 i get black screen on my radeon mobility 9000. previous versions gave me a garbled screen. humph. please remove the link above. mods at least please obey omni's wishes. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115893 Share on other sites More sharing options...
Peter Gammelgaard Posted May 19, 2006 Share Posted May 19, 2006 Can anyone explain why my laptop goes to stand by when closing lid after I have installed callisto 003? And when I try to start it, it just freezes.. I'm sure it is because of Callisto.. Do anyone know how to solve that problem? Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115896 Share on other sites More sharing options...
Tiburon Posted May 19, 2006 Share Posted May 19, 2006 Since there is an actual video driver, the system thinks it can support standby, but omni's driver doesnt account for power management. Thus the black screen Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115899 Share on other sites More sharing options...
Badger Posted May 19, 2006 Share Posted May 19, 2006 when changing resolution or refresh rates with build 004 I get a screen which tells me to hold down the power button and restart. Computer restarts fine back in 1024x768 @60hz. using 10.4.6 Jas patch x800xt PCIE 5d57 *EDIT* I reinstalled and no longer get the "hold power button" screen. just plain old out of range when switching res. Link to comment https://www.insanelymac.com/forum/topic/16847-callisto-technical-discussion/page/23/#findComment-115904 Share on other sites More sharing options...
Recommended Posts