Geeze Posted January 4, 2009 Share Posted January 4, 2009 As always, great job Uphuck! Running flawlessly on my Toshiba laptop. Upgraded to 10.5.6 using system update with no problems! Thanks! Geeze Link to comment Share on other sites More sharing options...
Nappy619 Posted January 5, 2009 Share Posted January 5, 2009 1- This DVD is designed for Intel architectures.Minimum requirements: Intel Core CPU, 1GB RAM, 15GB free space on target partition, nVidia 6xxx or newer - ATI X1300 or newer - Intel GMA950 or X3100 VGA card. 2- This DVD includes Apple's Mac OS X Leopard 10.5.5 (9F33) installation. 3- Make sure that the md5 checksum of your iATKOS iso image matches the one posted on our website. Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly. Information: - This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives. - The major improvement on this 5i release is updating your running system using software updater just like real Macs. This is possible for Intel based chipsets. Please read the information about preparing an upgradable system below. - Main system is fully stock! That means it can't run on x86 hardware without selecting none of x86 patches. At least you need to choose one of the decrypters. Installation: 1- Run Disk Utility via Utilities menu and erase the target partition for clean install. Do partitioning if you need to. a- You can choose MBR (Master Boot Record) or GPT (Guid Partition Table) via partitioning options. If you want to change your existing partition table type, note that all your existing data on disk will be gone. b- For Windows fellows that has not tested this amazing system yet and that does not want to loose their windows software, porn and virus&trojan archive on D:\, should use Parted Magic Live CD for preparing an active primary target partition and after that, just erase it via diskutil. Jump to Step 2. 2- Select the destination for installation. 3- Click Customize*** and select what you need. 4- Click Install. Install time is about 20 minutes. *** Customize section is the most important part of the installation for you to make OS X work on your hardware. Customize: - iATKOS Main system: If you want to install the osx86 main system, you need to select this. - Bootloader: You have 2 choices. You must select one of them for booting your osx86 system. PC_EFI V9 is an "all in one" bootloader and has many options. The most important ones are DSDT override, external kexts and the 64bit mode (snow leo only). DSDT override will be needed for the upcoming updates, otherwise osx86 systems will have kernel panic due to new RTC driver. "External kexts" option allows users to use external location for their special drivers (/Extra/Extensions), this will protect them from the updates. iATKOS v5i installation has all the needed scripts and packages for you to prepare an upgradable system and update like real Macs, but you need to read the information about preparing an upgradable system below. The other choice is Chameleon v1.0.11. This is compatible for most systems, users whom want to have a normal old-style osx86 system may choose this bootloader. - Decrypters: You must select one of the decrypters for your x86 hardware. - SMBIOS: You need to select one of the enablers or classic x86 SMBIOS drivers. Enablers allow your system to run on stock SMBIOS driver and this is also a must for upgradable systems. x86 patched SMBIOS' are for normal old style osx86 systems. - Kernel: You can choose 9.5.0 voodoo, 9.5.0 fassl kernel or old 9.2.0 toh kernel which is compatible for most. For upgradable systems, the custom kernel you selected will be protected after applying the update, which means you will be running on new System.kext + your old 9.x.0 custom kernel which is not right. System must run on System.kext that belongs to your kernel version. So, you will need to replace new System.kext with your old System.kext, otherwise you will not able to use none of USB devices. You can find your custom kernel's System.kext under /Library/Temp. New updated one is in /System/Library/Extensions folder. Do not forget to repair the disk permissions using Disk Utility. If you want to switch to stock kernel when running upgradable system, then you need to edit com.apple.Boot.plist file under /Library/Preferences/SystemConfiguration. You need to change the value ''custom'' to ''mach_kernel'' and reboot. Don't forget to use the same System.kext version with your running kernel. For normal iATKOS osx86 systems you need to check /Library/Backups folder for the stock kernel and replace it with the existing kernel on your root. - ACPI: Main system includes stock ACPI driver. You can choose modified ACPI for shutdown/reboot problems and also you can select OHR driver for such issues. You can choose x86 modified ACPI driver for PS2 mouse/keyboard and also PS2 driver can sure manage that but it is not a good choice for upgradable systems. You may need to select APIC driver for some mobo. - Disabler: This driver disables some problematic drivers, you may not need this for PC_EFI V9 systems but this can still be usefull for most systems. - Remove PowerManagement: This removes the most problematic driver. You do not need it if you select Disabler or if you are on PC_EFI V9 bootloader. - PS/2: Driver for PS/2 keyboard/mouse. You will need to modify the Info.plist of ACPIPS2Nub.kext for the update's ACPI version before applying main system update, otherwise your ps2 mouse/keboard will not work. For upgradable systems, I advice you to use x86 ACPI driver instead of this. - OHR: Driver for freeze issues on shutdown/reboot. Modified ACPI driver can be an alternative for this. - Drivers: Additional drivers for your setup. Read the descriptions. *********Preparing an Upgradable System********** A profile is given below, first four items are musts for upgradable systems, the rest are for additional setups. Read carefully. Intel chipsets have more chance for success. - Main System - PC EFI V9 Bootloader - One of the Decrypters - One of the SMBIOS Enablers - It is better to use the stock kernel. If any custom kernel is selected then you will need to replace the System.kext with the one in /Library/Temp after applying the update. - For PS2 mouse/keyboard it is better to select x86 ACPI driver instead of PS2 driver. - Speedstepping support may be problematic for upgradable systems without Disabler. But you can use it safely with Disabler. - GMA950-a will fail after update, GMA950-b or efi string should be selected for such systems. Multiboot: iATKOS 5i has no integrated procedure for multibooting but preparing a multiboot GPT or MBR system with this release is easy. Here is a ''How To'' for GPT and MBR triple boot including Mac-Win-Linux. - MBR (Master Boot Record) triple boot - - Change your partition table type to MBR (msdos type) and create 3 primary partitions by using Parted Magic Live CD or iATKOS Disk Utility. HFS+ format for OS X target, Fat32 for the others. (Note: %99.99999 of the PC harddrives already have MBR partition map scheme (msdos type) which you can change it to GPT via Parted Magic CD or iATKOS Disk Utility if you like to.) - Add boot flag to Vista or Linux target and install the OS' in any order you like. For linux, do not install bootloader to MBR, install it to linux root. If you want linux to take the boot control then you need to install its bootloader to MBR. - Boot iATKOS 5i DVD and install OS X to its target as usual. - You may need to repair Vista. Add boot flag to Vista partition, boot Vista DVD, select repair, add boot flag to OS X partition, thats all. Now you have triple boot on MBR. Note: Adding boot flag to MBR partitions: Boot Parted Magic Live CD, right click to partition, select flags and click to boot. - GPT (Guid Partition Table) triple boot - - Change your partition table type to GPT (Guid Partition Table) and create 3 partitions by using iATKOS Disk Utility. HFS+ format for OS X target, Fat32 (msdos) for the others. - Boot Windows Media and install it to its Fat32 target partition. (Note: Vista might not detect the hybrid partition table as XP does If so it will refuse to install the OS on the target. The trick is just try to format the other partition and then select your real target again for installation, you will see that it will success this time. No need to worry, it will not erase any data that time, because it cannot even detect the MBR part of the hybrid but this trick solves it.) - Boot Linux media and install the OS. If you want OS X to take the control of booting then install Linux bootloader to Linux root. If you want Linux to take the control then install it to MBR (actually the MBR of msdos part of the hybrid partition table) and you will need to change the install order also. The one which will take the boot control should be the last one to be installed. (Note: Some live linux cd stuff (knoppix, kanotix, parsix, etc.) has built-in installer applications and they use gparted for partitioning and formatting targets. At this point, formatting target to linux fs via Gparted is not a good choice because it may break the hybrid partition table, use unix fdisk just for changing the target partition type from ''c0'' to ''83'' which is linux partition type, then you can continue installation.) - Boot iATKOS 5i DVD and install OS X as usual. Now you have triple boot on GPT, thats all. Known Issues: - This dvd may not include all the necessary drivers required by your setup. Additional steps may be needed to be taken by the user to setup and use such components. Unsuccessful Installation and Related Symptoms: - System freezes at grey screen by booting from DVD. --> You probably have an unsupported chipset. *965 or newer chipset ASUS or MSI motherboard/laptop *many VIA, SIS, ATI chipset motherboards ~ start with cpus=1 -v ~ Play with BIOS settings, turn off 1 core ~ There are modified BIOS' for Intel 965 and newer ASUS/MSI motherboards ******************************************* Installation went smooth,but I'm getting a error code [-70017] "intailation error A valid video device could not be found for playback" When trying to play a DVD movie. Also,when in itunes I'm not able to go into "cover flow" Again something about the video device. ASUS P5k deluxe WiFi 6600 quadcore Nvidia 8600GTS 4GB ram Maxtor sata 250gb lite on DVD Any idea what this error is? any fixes? Link to comment Share on other sites More sharing options...
uphuck Posted January 6, 2009 Share Posted January 6, 2009 bigggg post it is about your vga. choose the right driver for your 8600gts, read the details pls. Geeze, your welcome. Link to comment Share on other sites More sharing options...
ModdTaco Posted January 6, 2009 Share Posted January 6, 2009 Can't seem to get this one to work. Keeps looping at boot or Display failing. Link to comment Share on other sites More sharing options...
Metralha Posted January 6, 2009 Share Posted January 6, 2009 Ok here it goes a retard question i know that with previous version we cant use a Sata DVD. so is it possible to use a sata dvd to instal iatkos 10.5.5? or will i get the famous "still w8ng for bla bla bla?" no flaming plz Link to comment Share on other sites More sharing options...
Nappy619 Posted January 6, 2009 Share Posted January 6, 2009 bigggg post it is about your vga. choose the right driver for your 8600gts, read the details pls. Geeze, your welcome. Thanks. sorry to trouble you. Link to comment Share on other sites More sharing options...
Core24All Posted January 10, 2009 Share Posted January 10, 2009 Ok here it goes a retard question i know that with previous version we cant use a Sata DVD. so is it possible to use a sata dvd to instal iatkos 10.5.5? or will i get the famous "still w8ng for bla bla bla?" no flaming plz I used a SATA DVD burner to install iATKOS 5i on my comp. I had no problems at all. Intel DP35DP Core 2 Quad 4GB RAM 500GB HD 8600 GT 512 MB Link to comment Share on other sites More sharing options...
DAMONINO Posted January 10, 2009 Share Posted January 10, 2009 i have problem with parallels 4 & vmware fusion 2.01 going in kernel panic when i try to use one of these. Link to comment Share on other sites More sharing options...
NEWZ23 Posted January 10, 2009 Share Posted January 10, 2009 Hey guys im new here and new to Mac hope someone can answer my questions. Here are my specs Vista 64 SP1 Q6600 Asus P5E deluxe X48 chipset 4gb ram Ati 4870X2 Uses SupremeFX II soundcard comes with the mobo 1.will I have any problems installing on this setup and what checkboxes need to be checked before installing? 2.Does this version of Mac Os x have alot stripped down? Link to comment Share on other sites More sharing options...
omizzle Posted January 10, 2009 Share Posted January 10, 2009 I am having trouble installing this onto my ip35 pro motherboard. Here are my specs Q6700 IP35 Pro 8800 GTS 512 4 GB RAM I have tried quite a few configurations, here is my most recent: Main system Apple Decrypt SMBIOS- EFI Disabler Remove Power management.kext OHR Remove thermal.kext 8800 GTS 512 EFI String Intel AHCI SATA Realtek R1000 (does this work wth the realtek 8110SC?) Intel Speedstep B Help please, I have been trying to get this fixed forever, but I am not having any good luck Link to comment Share on other sites More sharing options...
newbii Posted January 10, 2009 Share Posted January 10, 2009 UPHUCK..., can you please help me out here. I first thanks for the distro, it works really well with my P4. I recently just update my cpu to E6550 core 2 duo, install is oki with cpus=1, but my question is: is there a way to install without cpus=1? how do i get all core working? plzz help ...... Link to comment Share on other sites More sharing options...
NaziX Posted January 10, 2009 Share Posted January 10, 2009 Thank You Link to comment Share on other sites More sharing options...
Arial Posted January 10, 2009 Share Posted January 10, 2009 I am having trouble installing this onto my ip35 pro motherboard. Here are my specs Q6700 IP35 Pro 8800 GTS 512 4 GB RAM I have tried quite a few configurations, here is my most recent: Main system Apple Decrypt SMBIOS- EFI Disabler Remove Power management.kext OHR Remove thermal.kext 8800 GTS 512 EFI String Intel AHCI SATA Realtek R1000 (does this work wth the realtek 8110SC?) Intel Speedstep B Help please, I have been trying to get this fixed forever, but I am not having any good luck where is Bootloader? select PC EFI V9 or Chameleon. and if you select Intel AHCI SATA, make sure your SATA has configured as AHCI on BIOS. My Abit IP35-E, doesnt have AHCI options. Custom Install Options: - iATKOS v5i Main System - PC EFI V9 - AppleDecrypt - SMBIOS-EFI - Disabler.kext - OHR - Remove Thermal kexts - Graphics Update - 8600 GT 256MB EFI String - Intel SATA - JMicron - Intel Speedstep a Post install: - IONetworkingFamily.kext for Marvel Yukon 88E8056 Gigabit http://rapidshare.com/files/170247263/Marv...kon.88E8056.zip http://www.megaupload.com/?d=DUA5NQ7Q - Realtek HDA ALC888 on ICH9 http://rapidshare.com/files/170247125/Real...ALC888.ICH9.zip http://www.megaupload.com/?d=YHTJLG2D - Voodoo XNU Kernel 9.5.0 R1.0 http://code.google.com/p/xnu-dev/downloads/list more.. http://uphuck.ggrn.de/forum/viewtopic.php?...;p=21030#p21030 http://uphuck.ggrn.de/forum/viewtopic.php?...;p=22030#p22030 Link to comment Share on other sites More sharing options...
gute Posted January 11, 2009 Share Posted January 11, 2009 Hello All, I am new in this forum. This is absolutely upchuck masterpiece. Dear Arial, I want to try your hardware configuration. Is it ok if I use motherboard Abit IP35 (with onboard firewire support)? Will iatkos 5i recognize the firewire device? thanks. Link to comment Share on other sites More sharing options...
Metralha Posted January 12, 2009 Share Posted January 12, 2009 well i was having the Almighty" Waiting for root" stuff with my sata dvd so i just got this beast up n running with IDE dvd and update to 10.5.6 directly from apple YAY!! My only problem is my sound card!! I cant find drivers or kext for my creative audigy 2z..... any ideas? Link to comment Share on other sites More sharing options...
thiagoscp Posted January 12, 2009 Share Posted January 12, 2009 Hi, I really need some help. When I put the DVD, it asks me if I want to boot from DVD. I chose this option. And it starts to run. But when the gray screen appears with the white apple, it restart instantanealy. What can it be? Did you see something like this before? Thank you very much. I'm sorry for my english. Thiago Link to comment Share on other sites More sharing options...
omizzle Posted January 12, 2009 Share Posted January 12, 2009 where is Bootloader? select PC EFI V9 or Chameleon.and if you select Intel AHCI SATA, make sure your SATA has configured as AHCI on BIOS. My Abit IP35-E, doesnt have AHCI options. Custom Install Options: - iATKOS v5i Main System - PC EFI V9 - AppleDecrypt - SMBIOS-EFI - Disabler.kext - OHR - Remove Thermal kexts - Graphics Update - 8600 GT 256MB EFI String - Intel SATA - JMicron - Intel Speedstep a Post install: - IONetworkingFamily.kext for Marvel Yukon 88E8056 Gigabit http://rapidshare.com/files/170247263/Marv...kon.88E8056.zip Marvell.Yukon.88E8056.zip [1.32MiB] - Realtek HDA ALC888 on ICH9 http://rapidshare.com/files/170247125/Real...ALC888.ICH9.zip Realtek.ALC888.ICH9.zip [905.90KiB] - Voodoo XNU Kernel 9.5.0 R1.0 http://code.google.com/p/xnu-dev/downloads/list more.. http://uphuck.ggrn.de/forum/viewtopic.php?...;p=21030#p21030 http://uphuck.ggrn.de/forum/viewtopic.php?...;p=22030#p22030 I tried this configuration, but as it is booting from the hard drive, half of the screen turns grey and the wheel thing stopped spinning. What is going on?? Link to comment Share on other sites More sharing options...
Arial Posted January 12, 2009 Share Posted January 12, 2009 Hello All, I am new in this forum. This is absolutely upchuck masterpiece. Dear Arial, I want to try your hardware configuration. Is it ok if I use motherboard Abit IP35 (with onboard firewire support)? Will iatkos 5i recognize the firewire device? thanks. I dont know, try it Firewire usually auto-detected. my VIA firewire (PCI card) also worked without any fix on any distros which I've tested. I tried this configuration, but as it is booting from the hard drive, half of the screen turns grey and the wheel thing stopped spinning. What is going on?? when darwin boot prompt, hit any key then boot with -v you'll see more detail. please notes: select Intel SATA if your SATA controller doesn't configured ACHI, but select Intel AHCI SATA if it as AHCI. and dont select JMicron if you dont use it. and for safety.. - select Kernel 9.5.0 Voodoo - dont select Speedstep. VoodooPower by Superhai much better http://forum.insanelymac.com/index.php?showtopic=143898 Link to comment Share on other sites More sharing options...
svencux Posted January 12, 2009 Share Posted January 12, 2009 have it installed on y Medion MD8800. All runs fine. I did try to update to 10.5.6 through apple direkt update. It worked well but i lost some of my usb ports (no idea why). Well went back to 10.5.5 No I will get myself an airport express card and get rid of he hama usb wlan stick. thanks to all people whomade this work. Link to comment Share on other sites More sharing options...
HolyCrap Posted January 12, 2009 Share Posted January 12, 2009 This release is seriously awesome. I only got it up and running fully yesterday, so I can't claim to have checked every single thing, but so far it worked great with my Dell Inspiron 530. Thanks! Link to comment Share on other sites More sharing options...
ModdTaco Posted January 13, 2009 Share Posted January 13, 2009 Custom Options For Dell 5150 - iAtkos v5i - PC EFI V9 - AppleDecrypt - SMBois Enabler - 9.5.0 Kernel voodoo - APIC Driver - Disabler.kext - Graphics Update - EFI String 8800GT 512MB Works so far but how would I go about updating this set up. I've tried several times and each time I get the dreaded Cannot Connect to Root device error and my setup is then fried. Do I have the right setup going for a Upgradable system? I thought I did. Any help appreciated guys. Link to comment Share on other sites More sharing options...
Wylde Posted January 13, 2009 Share Posted January 13, 2009 Hey I'm trying to install this relase on my PC: GA-G31M-S2L with E5200 Core2Duo HDD 250gb (PATA) <-master 1-st partition - ~220gb NTFS (windows) 2-nd partition - ~25gb FAT32 for MacOs DVD-RW (PATA) <-slave and still getting this error: (while booting from DVD) diskarbitrationd[44]: unable to mount disk0s1 diskarbitrationd[44]: unable to mount disk0s2 I cant even go into the installation proces I was searching for solution but with no success... thanks for any advice Link to comment Share on other sites More sharing options...
omizzle Posted January 14, 2009 Share Posted January 14, 2009 I dont know, try it Firewire usually auto-detected. my VIA firewire (PCI card) also worked without any fix on any distros which I've tested. when darwin boot prompt, hit any key then boot with -v you'll see more detail. please notes: select Intel SATA if your SATA controller doesn't configured ACHI, but select Intel AHCI SATA if it as AHCI. and dont select JMicron if you dont use it. and for safety.. - select Kernel 9.5.0 Voodoo - dont select Speedstep. VoodooPower by Superhai much better http://forum.insanelymac.com/index.php?showtopic=143898 Also, can you tell me how I can install the Realtek ALC 888 kexts? It keeps saying they arent installed correctly. I dragged them into the Extensions folder and ran the pkgs, but when I rebooted I got the message (and my sound still doesnt work!) Link to comment Share on other sites More sharing options...
Terrence Monroe Posted January 14, 2009 Share Posted January 14, 2009 Awesome! Fully upgradable system. Had to reinstall my sound and graphics after update but I can deal. Anyone know how to install kexts into the external kexts folder, located /Extra/Extensions..???? If I could get my modified kexts to install and work in there I wouldn't have to reinstall after update...maybe? Link to comment Share on other sites More sharing options...
mrgee Posted January 14, 2009 Share Posted January 14, 2009 Installation was trouble free, but my ethernet card (intel) is not working also I have only one screen resolution 1024 X 756.. I selected the appropriate drivers for ethernet and graphics, but neither are working .. My last install was Kalyay 10.5.2 which worked perfectly everything worked including ethernet and high resolution screen display.. Any suggestions? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts