Jump to content

G94(9600gt) is fully supported by new mbp drivers!

generalmilk

By generalmilk,
in nVidia

 Share
303 posts in this topic

Recommended Posts

beriguu
beriguu
Posted
Posted
Thanks for your explanation. I think I will just entirely re-install the whole OS and do exactly what you did. BTW: I remember when installing NVDarwin that I could select some options (like install original Apple KEXT files, install modded kext files etc). Do you remember which ones you selected ? And last: what videocard do you have exactly ? Thanks again for your help.

 

On NVDarwin, ONLY choose your memory size. You do not need to select anything else. So if you have 512MB, only check that box. Do not worry about any KEXTs.

 

I have emTek 9600GT 512MB. Full detail is in my signature below.

 

But I think it's a Palit card. They tend to rebadge cards in Korea.

Link to comment
Share on other sites
smmakira
smmakira
Posted
Posted

beriguu, I did exactly what steps were from your post. Installed iDeneb 10.5.5 v1.3 restarted in safe mode. Installed the aquamac v2 drivers. rebooted into normal mode, installed NVdarwin 1.2.3 for 512 cards and restarted again. It says in system prefs that QE/CI are supported and even says 9600GT, however when I play a game that runs in a window or full screen it's either a black window or a bank screen and I have to hard restart the machine. The screen effects and animations are accelerated and I get full resolution changes. Any ideas?

Link to comment
Share on other sites
beriguu
beriguu
Posted
Posted
beriguu, I did exactly what steps were from your post. Installed iDeneb 10.5.5 v1.3 restarted in safe mode. Installed the aquamac v2 drivers. rebooted into normal mode, installed NVdarwin 1.2.3 for 512 cards and restarted again. It says in system prefs that QE/CI are supported and even says 9600GT, however when I play a game that runs in a window or full screen it's either a black window or a bank screen and I have to hard restart the machine. The screen effects and animations are accelerated and I get full resolution changes. Any ideas?

 

 

Sorry, I haven't encountered those problems you listed. I wouldn't know where to start to help you.

Maybe a resident guru can help?

 

BTW - Did you run the carbon lib patch for iDeneb v1.3? I don't know if that'll help.

Link to comment
Share on other sites
DanBroken
DanBroken
Posted
Posted

Well, my system is:

- Motherboard Gigabyte GA 8i945GZME-RH with Pentium D Processor and 1gb of memory.

- XFX GeForce 9600 GT 512mb

 

The version that I use was iDeneb 1.3 10.5.5 with Kernel 9.4.0 (is not vanila) and I used the topic tips, so I have change resolutions and fan control.

 

But I Don`t have QI and CE Hardware Acceleration.

 

Anybody have a tip to this hardware?!?!

 

P.S. When I try to decompress the Extensions.tgz, It is returning a error. So I decompress at Linux with tar, but with Errors. Do Anybody had this problem too? Could it be corrupt?

 

Thanks

Link to comment
Share on other sites
DanBroken
DanBroken
Posted
Posted
Well, my system is:

- Motherboard Gigabyte GA 8i945GZME-RH with Pentium D Processor and 1gb of memory.

- XFX GeForce 9600 GT 512mb

 

The version that I use was iDeneb 1.3 10.5.5 with Kernel 9.4.0 (is not vanila) and I used the topic tips, so I have change resolutions and fan control.

 

But I Don`t have QI and CE Hardware Acceleration.

 

Anybody have a tip to this hardware?!?!

 

P.S. When I try to decompress the Extensions.tgz, It is returning a error. So I decompress at Linux with tar, but with Errors. Do Anybody had this problem too? Could it be corrupt?

 

Thanks

 

Yahoo!. Finally I did it. Now I have QI and CE full. My way was:

 

1 - Fresh Install iDeneb v1.3 10.5.5 with Kernel 9.4.0 and all my hardware support.

2 - Boot with -x (safe mode) and install NVIDIA 9000 Series Driver v2 and NVDarwin 1.2.4 packages (choose 512mb option).

3 - Reboot and smile. :D

 

The link`s packages needed are in thread.

 

Sorry my bad english. ^_^

Link to comment
Share on other sites
derpuma
derpuma
Posted
Posted

Hi generalmilk,

 

may I need your help. Tried today to install my sparkle passive cooled 9600 GT 512MBwith yout EFI method.

Did everythink step by step, but was not successful!!!

 

The card works fine with the NVIDIA9000_Driver Package and the NVdarwin 1.2.4 Package.

Unfortunatly I need the EFI Install cause of my Monitor Calibration Software which does not work with Injekted Drivers!

 

Can you please give me some tipps?

 

Here is what I did:

 

I cloned a fresh install (nor graphic drivers - only 10.5.5 original kexts and the from Leo 10.5.5 and the patched kext for my motherboard) to an empty disk.

Booted into that disk -v -x

Changed the device ID in ...Hal50.kext

Created EFI Boot String via OSX86 Tools.

Installed the EFI String to apple.com.bootlist

Repaired Permissions via EFI Tools.

Restart - no success.... Screen greys down to the half while booting an stucks.....

 

:-(

 

Tried it in diffrent ways with diffrent editors and Tool. Nano, PLIST Editor, etc.

 

Don't know what to do right now.

 

So mybe I did something wrong?!

Do i hvae to install the kexts from your package? I think cause i have a clean 10.5.5 cloned, I do not need to install the kexts from rumblepackage!?

 

Help would be very nice,

 

BR derpuma

Link to comment
Share on other sites
kharak
kharak
Posted
Posted

"Index Refs Address Size Wired Name (Version) <Linked Against>

1 1 0x0 0x0 0x0 com.apple.kernel (9.5.0)

2 33 0x0 0x0 0x0 com.apple.kpi.bsd (9.5.0)

3 3 0x0 0x0 0x0 com.apple.kpi.dsep (9.5.0)

4 44 0x0 0x0 0x0 com.apple.kpi.iokit (9.5.0)

5 49 0x0 0x0 0x0 com.apple.kpi.libkern (9.5.0)

6 44 0x0 0x0 0x0 com.apple.kpi.mach (9.5.0)

7 24 0x0 0x0 0x0 com.apple.kpi.unsupported (9.5.0)

8 1 0x0 0x0 0x0 com.apple.iokit.IONVRAMFamily (9.5.0)

9 1 0x0 0x0 0x0 com.apple.driver.AppleNMI (9.5.0)

10 1 0x0 0x0 0x0 com.apple.iokit.IOSystemManagementFamily (9.5.0)

11 1 0x0 0x0 0x0 com.apple.iokit.ApplePlatformFamily (9.5.0)

12 11 0x0 0x0 0x0 com.apple.kernel.6.0 (7.9.9)

13 1 0x0 0x0 0x0 com.apple.kernel.bsd (7.9.9)

14 1 0x0 0x0 0x0 com.apple.kernel.iokit (7.9.9)

15 1 0x0 0x0 0x0 com.apple.kernel.libkern (7.9.9)

16 1 0x0 0x0 0x0 com.apple.kernel.mach (7.9.9)

17 12 0x2ec2e000 0x10000 0xf000 com.apple.iokit.IOPCIFamily (2.4.1) <7 6 5 4>

18 6 0x2ec44000 0x4000 0x3000 com.apple.iokit.IOACPIFamily (1.2.0) <12>

19 2 0x2ec8b000 0x37000 0x36000 com.apple.driver.AppleACPIPlatform (1.0.3) <18 17 12>

20 0 0x2ed12000 0x5000 0x4000 com.apple.BootCache (30.1) <7 6 5 4 2>

21 10 0x2ed39000 0x18000 0x17000 com.apple.iokit.IOStorageFamily (1.5.2) <7 6 5 4 2>

22 0 0x2ed66000 0x10000 0xf000 com.apple.driver.DiskImages (195) <21 7 6 5 4 2>

23 2 0x2edc6000 0x39000 0x38000 com.apple.iokit.IOHIDFamily (1.5.3) <7 6 5 4 2>

24 0 0x2ee2f000 0x8000 0x7000 com.apple.nke.applicationfirewall (1.0.77) <7 6 5 4 2>

25 0 0x2ee53000 0x18000 0x17000 com.apple.security.seatbelt (107.10) <7 6 5 3 2>

26 0 0x2ee72000 0x3000 0x2000 com.apple.security.TMSafetyNet (3) <7 6 5 3 2>

27 0 0x2ee90000 0x4000 0x3000 com.apple.driver.AppleAPIC (1.1.0) <12>

28 0 0x2ee98000 0x5000 0x4000 com.apple.driver.AppleSMBIOS (1.0.13) <12>

29 0 0x2efe2000 0x4000 0x3000 com.apple.driver.AppleACPIButtons (1.0.3) <23 19 18 7 6 5 4 2>

31 0 0x34350000 0x3000 0x2000 com.apple.driver.AppleACPIPCI (1.0.3) <19 18 17 12>

32 0 0x34386000 0x5000 0x4000 com.apple.driver.AppleRTC (1.0.6) <18 6 5 4 2>

34 1 0x344ff000 0x16000 0x15000 com.apple.iokit.IONetworkingFamily (1.6.0) <7 6 5 4 2>

35 7 0x34553000 0x28000 0x27000 com.apple.iokit.IOUSBFamily (3.1.5) <7 6 5 4>

36 0 0x345ac000 0xe000 0xd000 com.apple.driver.AppleUSBUHCI (3.1.5) <35 17 7 6 5 4>

37 0 0x345c0000 0x3000 0x2000 com.apple.driver.AppleEFIRuntime (1.1.0) <7 5 4>

38 3 0x345f6000 0xd000 0xc000 com.apple.iokit.IOATAFamily (1.7.3f1) <6 5 4 2>

39 0 0x3461c000 0x9000 0x8000 com.apple.driver.AppleIntelPIIXATA (2.0.0) <38 17 6 5 4>

40 0 0x34699000 0x12000 0x11000 com.apple.driver.AppleUSBEHCI (3.1.5) <35 17 7 6 5 4>

41 0 0x34717000 0x6000 0x5000 com.apple.driver.AppleRTL8169Ethernet (1.0.3) <34 17 6 5 4 2>

43 0 0x3477a000 0x2000 0x1000 com.apple.iokit.IOUSBUserClient (3.0.7) <35 6 5 4>

44 0 0x347cb000 0xb000 0xa000 com.apple.driver.AppleUSBHub (3.1.5) <35 6 5 4>

45 5 0x3482a000 0x19000 0x18000 com.apple.iokit.IOSCSIArchitectureModelFamily (2.0.4) <6 5 4 2>

46 0 0x34865000 0x4000 0x3000 com.apple.iokit.IOATAPIProtocolTransport (1.5.2) <45 38 12>

47 0 0x348c3000 0xe000 0xd000 com.apple.iokit.IOATABlockStorage (2.0.0) <38 21 6 5 4 2>

48 0 0x3492f000 0x5000 0x4000 com.apple.driver.XsanFilter (2.7.91) <21 12>

49 3 0x34994000 0x8000 0x7000 com.apple.iokit.IOCDStorageFamily (1.5) <21 6 5 4 2>

50 2 0x349d4000 0x6000 0x5000 com.apple.iokit.IODVDStorageFamily (1.5) <49 21 6 5 4 2>

51 1 0x349fd000 0x16000 0x15000 com.apple.iokit.IOSCSIBlockCommandsDevice (2.0.4) <45 21 6 5 4 2>

52 1 0x34a21000 0x5000 0x4000 com.apple.iokit.IOBDStorageFamily (1.5) <50 49 21 6 5 4 2>

53 0 0x34a4d000 0x16000 0x15000 com.apple.iokit.IOSCSIMultimediaCommandsDevice (2.0.4) <52 51 50 49 45 21 6 5 4 2>

54 0 0x34ac1000 0x6000 0x5000 com.apple.iokit.SCSITaskUserClient (2.0.4) <45 21 6 5 4 2>

55 0 0x34b14000 0x4000 0x3000 com.apple.driver.AppleUSBComposite (3.0.0) <35 5 4>

56 0 0x34be0000 0xa000 0x9000 com.apple.iokit.IOUSBMassStorageClass (2.0.2) <45 35 21 12>

58 0 0x34d46000 0x5000 0x4000 com.apple.iokit.IOUSBHIDDriver (3.1.0) <35 23 6 5 4>

59 2 0x41e17000 0x1d000 0x1c000 com.apple.iokit.IOGraphicsFamily (1.6.1) <17 7 6 5 4>

60 1 0x41e34000 0xe000 0xd000 com.apple.iokit.IONDRVSupport (1.5.2) <59 17 7 6 5 4>

61 1 0x41f8d000 0x26b000 0x26a000 com.apple.NVDAResman (5.3.4) <60 59 17 6 5 4 2>

62 0 0x421f8000 0x254000 0x253000 com.apple.nvidia.nv50hal (5.3.4) <61 5 4>

63 0 0x41e47000 0x3000 0x2000 com.apple.driver.AppleLPC (1.2.2) <17 6 5 4>

65 1 0x41e4d000 0x3000 0x2000 com.apple.kext.OSvKernDSPLib (1.1) <6 5>

66 2 0x41e50000 0x17000 0x16000 com.apple.iokit.IOAudioFamily (1.6.4b7) <65 6 5 4 2>

67 0 0x41e67000 0x4000 0x3000 com.apple.driver.AudioIPCDriver (1.0.4) <66 6 5 4 2>

68 1 0x41e6b000 0x9000 0x8000 com.apple.iokit.IOSerialFamily (9.1) <7 6 5 4 2>

69 1 0x41e74000 0x9000 0x8000 com.apple.driver.Apple16X50Serial (1.9) <68 17 12>

70 0 0x41e7d000 0x2000 0x1000 com.apple.driver.Apple16X50ACPI (1.9) <69 18 12>

72 2 0x41f17000 0x6000 0x5000 com.apple.iokit.IOHDAFamily (1.2.4a21) <6 5 4 2>

73 0 0x41f1d000 0x7000 0x6000 com.apple.driver.AppleHDAController (1.2.4a21) <72 17 6 5 4 2>

74 1 0x41f29000 0x9000 0x8000 com.apple.driver.AppleSMC (2.0.1d2) <18 7 6 5 4>

75 0 0x41f32000 0x3000 0x2000 com.apple.Dont_Steal_Mac_OS_X (6.0.2) <74 7 5 4 2>

77 0 0x4244c000 0x52000 0x51000 com.apple.driver.AppleHDA (1.2.4a21) <72 66 6 5 4 2>

78 0 0x41f3b000 0x2000 0x1000 com.apple.dsmos (1.0.0d1) <7 5 4 2>

79 0 0x4251e000 0x1b000 0x1a000 com.apple.filesystems.ntfs (2.1) <7 6 5 2>

80 0 0x4253d000 0xc000 0xb000 com.apple.filesystems.msdosfs (1.5.2) <7 6 5 2>

81 0 0x427ff000 0xb000 0xa000 com.apple.filesystems.autofs (2.0.1) <7 6 5 4 2>

"

 

I try to install Geforce.kext but nothing in terminal :/

 

Jeu de composants : NVIDIA GeForce 9600 GT

Type : Moniteur

Bus : PCIe

Longueur de la voie PCIe : x16

VRAM (totale) : 320 Mo

Fournisseur : NVIDIA (0x10de)

Identifiant du périphérique : 0x0622

Identifiant de révision : 0x00a1

Révision de la ROM : NVdarwin 1.2.4

Moniteurs :

SyncMaster :

Résolution : 1680 x 1050 @ 60 Hz

Profondeur : Couleurs 32 bits

Core Image : Logiciel

Moniteur principal : Oui

Miroir : Désactivé

Connecté : Oui

Quartz Extreme : Non géré

Connecteur pour le moniteur :

État : Aucun moniteur connecté

 

"1 - Fresh Install iDeneb v1.3 10.5.5 with Kernel 9.4.0 and all my hardware support.

2 - Boot with -x (safe mode) and install NVIDIA 9000 Series Driver v2 and NVDarwin 1.2.4 packages (choose 512mb option).

3 - Reboot and smile. biggrin.gif"

what are exactly your hardware support? and why 9.4.0 and not 9.5.0?

 

merci d'avance pour vos reponses ^^

Link to comment
Share on other sites
bangjogz
bangjogz
Posted
Posted

Maybe this is a silly question..but I have tried many times and still cant deal with it..

 

Can somebody teach my how to "Change the device ID in Edit Info.plist in NVDANV50Hal.kext" ??

I tried to edit using textedit but it keep said 'I have no privelege to edit bla bla bla' when I tried to save...

anyone could guide me to edit through terminal?

 

Thanks a lot..

Link to comment
Share on other sites
rschultz101
rschultz101
Posted
Posted

need a new card, 9500gt fanless any good ?

 

had a ati 2600xt, just would not sleep,...

put back old 7300gs, now it sleeps, oops no shutdown,....

 

still need a beefier card, should be fanless, 9500gt, or 9600gt ?

for wow , ut3, hd,

Link to comment
Share on other sites
lifeforce1
lifeforce1
Posted
Posted
beriguu, I did exactly what steps were from your post. Installed iDeneb 10.5.5 v1.3 restarted in safe mode. Installed the aquamac v2 drivers. rebooted into normal mode, installed NVdarwin 1.2.3 for 512 cards and restarted again. It says in system prefs that QE/CI are supported and even says 9600GT, however when I play a game that runs in a window or full screen it's either a black window or a bank screen and I have to hard restart the machine. The screen effects and animations are accelerated and I get full resolution changes. Any ideas?

 

I got exact same problem.Any solution?

Link to comment
Share on other sites
Alega
Alega
Posted
Posted
I tried to edit using textedit but it keep said 'I have no privelege to edit bla bla bla' when I tried to save...Thanks a lot..

 

Copy on the Desktop, change, save, copy back. Repair permissions. -_-

For you 9600GT? I did not edit ID, all works.

Link to comment
Share on other sites
bangjogz
bangjogz
Posted
Posted
Copy on the Desktop, change, save, copy back. Repair permissions. :)

For you 9600GT? I did not edit ID, all works.

 

oh really? coz mine didn't work eventhough I skip the change ID step..:)

Is it has to be run in 10.5.5?

 

I've tried so many methods but still unable to upgrade to 10.5.5...stuck on booting...

Link to comment
Share on other sites
kas
kas
Posted
Posted

my bfg oc2 9600 512mo works good ( with quartz and opengl loaded as well ) but I 've got a dark screen when I play a game and I must reboot my pc. I use vga to dvi adapter, can it be the reason of this black screen?

 

I know there was a black screen issue with new macbooks and nvidia chips, concerning this black screen, do you think it is a driver issue?

 

I just wanted to send my 9600gt drivers ,everything configured, with "how to"

 

just in case that it would maybe help some of you... just try it :)

 

http://rapidshare.com/files/171801522/9600gt.zip.html

Link to comment
Share on other sites
marc2j
marc2j
Posted
Posted

Hi there,

 

I have installed the AquaMac package, and then NvDarwin, but when I restart I get a black screen, and my monitor changes into a resolution that I believe my monitor can't handle. I've tried safe mode (-x) also, but I get the same thing.

 

**Just a quick edit, I have now installed AquaMac, then change the info.plist file, then imported kexts with the program, then used osx86tools to add the string. I even set the string to load in a resolution that my monitor could support, but it still loadded in 1280x1024, which it seems is just a blank screen.**

 

Using iATKOS 5i, 10.5.5...

 

Any help would be well appreciated...

Link to comment
Share on other sites
kas
kas
Posted
Posted
Hi there,

 

I have installed the AquaMac package, and then NvDarwin, but when I restart I get a black screen, and my monitor changes into a resolution that I believe my monitor can't handle. I've tried safe mode (-x) also, but I get the same thing.

 

**Just a quick edit, I have now installed AquaMac, then change the info.plist file, then imported kexts with the program, then used osx86tools to add the string. I even set the string to load in a resolution that my monitor could support, but it still loadded in 1280x1024, which it seems is just a blank screen.**

 

Using iATKOS 5i, 10.5.5...

 

Any help would be well appreciated...

 

 

did you try to edit your com.boot.plist file?

 

just add this to /system/library/preferences/system configuration/com.apple.Boot.plist

 

<key>Graphics Mode</key> <string>1280×1024×32</string>

 

 

just replace <string>1280×1024×32</string> with what you want

exemple : <string>1024x768×32</string>

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...