All Activity

Hi, now i tested my RX 5600 XT with 3 models ... V .42 The results below the first 3 are with older versions - much faster compared to v < .31

Approximately, but the development is not finished yet. If you don't want AMD HDMI audio then you can use version 3.0.5 Traditional. It's perfect.

Yes, I tried it. It works the same as the non-codec-specific version of VoodooHDA.kext. The only problem is that, when my laptop wakes from sleep, the internal speakers don't work until I reboot. Patching the nodes didn't make any difference. I suppose I should say that I'm using your SSDT (MaLd0n.aml) along with SSDT-GPRW.aml.

Do u tested this voodoohda? https://limewire.com/d/8Fn1L#zmd7hT5Dca I created this app for personal use, for quick checks. There is no release.

BTW, my GetDump from VoodooHDA also says that it's ALC285. ALC285 Audio Dump.txt Also, do you have a link for the Codec-specific version of HDA-Builder?

Try this VoodooHDA https://limewire.com/d/8Fn1L#zmd7hT5Dca U can use AppleALC or VoodooHDA on previous versions. The focus is on Tahoe and avoiding the root patch.

@MaLd0n Great job. Looks very exciting ! Question 1: Why is it called "HDAUniversal" but does not work for 10.6 to Catalina ? Question 2: Can you post your images directly into these forums instead of external websites which are blocked in the UK ? (this is what we see:)

Thanks for the suggestions. I've tried all of the layout IDs and, with AppleALC, only layouts 33 and 66 produce any audio devices and neither of them have the exact layout I have because much of my audio is digital and not controlled by the Realtek codec but by my disabled Nvidia GPU. That said, none of the layouts work with HDAUniversal. And another funny thing is that, when I use the My-Audio-Codec app (or Aida64 in Windows), it tells me that I have the ALC 285 codec but when I use the Audio dump in Clover, it tells me that I have the ALC 295 codec. Here's the My-Audio-Codec: Here's the audio dump from Clover: HdaCodec#0 (Realtek ALC295).txt BTW, the pin configuration in the Clover audio dump looks to be more correct than the pin configuration for either layouts 33 or 66 with ALC 285. However, non of the layouts for ALC 295 work except for layout 33 which works for both ALC 285 and 295.

@jlrycm Not tried yet this new but promissing audio kext. I have it in the pending tasks list: try HDAUniversal.kext in my hack and add it to the audio systems detected by About This Hack.

@miliuco I'm testing the new Tahoe audio kext (HDAUniversal.kext) that @MaLd0n just shared in one of the IM threads and it seems promising. Would you consider adding in the About my Hack app support for the audio stack enabled through this kext?

@miliuco and @chris1111, many thanks for another great job!

Based on @chris1111's idea of using a per-macOS-version artwork for generic external display (genericLCD assets), I have extended it to built-in screens (MacBook assets) so that, in the Displays tab, the image of the device(s) has the macOS version logo as a background. https://github.com/perez987/About-This-Hack/releases/tag/4.3.7

Options for your codec. You can use my clover version and press F8 key on boot screen for dump audio codec like linux https://limewire.com/d/Qejs6#PedXIuK9gN Files generated on misc folder inside Clover folder No. HDAUniversal does not require a separate preference pane like VoodooHDA. It is designed to integrate with the native macOS audio stack and relies on the standard Sound settings, providing an Apple-like experience similar to AppleALC. Output devices, input devices, volume, balance, sample rate, and other audio preferences are managed directly through the built-in macOS settings. It also includes automatic combo-jack handling for supported laptops, allowing headphone and headset microphone detection to work dynamically without requiring an external control panel. The goal of HDAUniversal is to deliver native integration, broad hardware compatibility, dynamic codec detection, combo-jack support, and automatic configuration while keeping the user experience as close as possible to a real Mac.

Thanks! I tested it by manually adding the kext to Library/Extensions and using the following commands (I like doing this kind of tweaks the old way): sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / sudo kextutil -v /Library/Extensions/HDAUniversal.kext sudo kextload /Library/Extensions/HDAUniversal.kext I booted with SIP=03000000 to install the kext manually and once installed, I changed SIP to 01000000 in the config file and rebooted. After rebooting it worked for me. Does this kext require any preferencepane like VoodooHDA or does it rely on the macOS built-in audio settings like AppleALC? I think the answer is the latter but wanted to confirm.

Not having any success getting my sound devices to show up with HDAUniversal. I'll keep working on it before I submit a report. I wanted to try this out because I was having problems getting both VoodooHDA and AppleALC working. With those, I get some audio function but my internal speakers don't work after waking from sleep. It may all be due to a layout ID that is not really suited to my system but I have tried all of the layout IDs for my codec (ALC 285) and none of them seem to work well.

It should work with any of them, except 00000000; I actually only use 03080000 or FF0F0000.

thanks @MaLd0n so, does this mean that I need to boot with SIP=03000000 to install it, right? And once installed, can I change it to 01000000 (allows untrusted kexts)?

We need a CSR value different from 00000000 because 00000000 means SIP is fully enabled, which can block development or unsigned kexts before the Security/Privacy approval prompt appears. 00000000 = SIP fully enabled. 01000000 = allows untrusted kexts. 03000000 = untrusted kexts + unrestricted filesystem. 03020000 = untrusted kexts + unrestricted filesystem + unapproved kexts. 030A0000 = untrusted kexts + unrestricted filesystem + unapproved kexts + unauthenticated root. FF0F0000 = almost everything allowed in the classic CSR bits. This kext is specific for Tahoe, old system i'm using AppleAlc or VoodooHDA.

Small update! Just added a Windows 11 + MyDockFinder showcase to the Tahoe Drive Icons Pack. Although the project primarily targets macOS, the included high-resolution PNG assets can also be converted into Windows .ico files, making it possible to create a surprisingly authentic macOS-inspired desktop environment under Windows 11. The README and Post #1 have both been updated accordingly. Enjoy!

@MaLd0n Great Job!

@MakAsrock Thanks for the feedback!

Did you make release for Old mac 10.6 to Catalina?

@MaLd0n great development. I would like to test it. Is there a need to partially disable SIP when installing for the first time like with VoodooHDA? If yes, what is the csr value to define in config file for installation? Can we change SIP to 01000000 after installation like with VoodooHDA? Or there is no need to tweak SIP?

Working on HP Prodesk 600 G1 Thanks dear freind

Tested HDAUniversal on my Hackintosh and it works perfectly Thanks @MaLd0n