Jump to content

Cardbus/PCMCIA Controller ID 104C:8039 Texas Instruments PCIxx12


  • Please log in to reply
418 replies to this topic

#201
atiom

atiom

    InsanelyMac Protégé

  • Members
  • Pip
  • 22 posts
I got TI PCIxx12 with the id on the topic 104C:8039
It keeps frozing every boot I guess it is the memory tanges but after reading the entire post i just can't understand where to edit to put my memory ranges.

lspci goes like this:

08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Hewlett-Packard Company Unknown device 30a5
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at d2004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001

Any pointer in the right direction would be greatly appreciated.

Cheers ;)

#202
r5a

r5a

    InsanelyMac Protégé

  • Members
  • Pip
  • 27 posts
  • Location:Toronto Ontario, Canada.
One of the earlier pages, bugs bunny put up a program to edit your plist file, I forgot the name of it, it's in here somewhere.
Use that to open your info.plist, scroll to your respective selection wheres its like ADC2,1 or whatever, and then it will say memory ranges, just enter them in there and it will be converted for you.

#203
NHJ

NHJ

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

I got TI PCIxx12 with the id on the topic 104C:8039
It keeps frozing every boot I guess it is the memory tanges but after reading the entire post i just can't understand where to edit to put my memory ranges.

lspci goes like this:

08:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Hewlett-Packard Company Unknown device 30a5
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at d2004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001

Any pointer in the right direction would be greatly appreciated.

Cheers ;)


disable the firewire in bios

#204
atiom

atiom

    InsanelyMac Protégé

  • Members
  • Pip
  • 22 posts
I finally figured it out and put in my i/o and memory ranges using plist editor.
Now this is the output for my dmesg | grep PC
Thanks everybody for your help

IOPCCard notice: AdjustResourceInfo: Bad size
IOPCCardBridge::start failed
AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled
FireWire (OHCI) TI ID 803a PCI now active, GUID 653f0200c6334084; max speed s400.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/FUJITSU MHV2080BH Media/IOFDiskPartitionScheme/Untitled 1@1

#205
Matthew Jason

Matthew Jason

    InsanelyMac Protégé

  • Members
  • PipPip
  • 51 posts
Greetings,

I am using the same card controller with my Toshiba R200 Laptop. However, this is what I get:

AppleIntelPIIXPATA: Secondary PCI IDE channel is disabled
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/FNC1@1F,1/AppleIntelPIIXATARoot/IDE0@0/AppleIntelPIIXPATA/ATADeviceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/TOSHIBA MK6006GAH Media/IOFDiskPartitionScheme/Untitled 3@3
IOPCCard info: Intel PCIC probe: not found.
IOPCCardBridge::start failed

Strange huh? Anyone could help me please?

Thanks.

Matthew

#206
tuxx

tuxx

    InsanelyMac Protégé

  • Members
  • PipPip
  • 87 posts
  • Gender:Male
Hi,

Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges).

The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me.

thanks probono for sharing this,
tuxx.

#207
FavleX

FavleX

    FavleX

  • Members
  • PipPipPipPipPipPipPip
  • 727 posts
@TUXX
I am like Speddish got the same 5612 Acer so the same ENE clone or something for my PCMCIA , do you think I should try your kext on my lap??

#208
britt

britt

    InsanelyMac Protégé

  • Members
  • Pip
  • 28 posts
hi am running osx 10.4.9, native on a toshiba satellite a135-s4427,
intel centrino duo 1.73,2gigs ram , intel 945GM express chipset,
just upgraded to the latest netkas kernel, which seemed to fix my sound,video,fsb,clock probs, but?
i have a built in texas inst 5 in 1 card reader which does not work at all ?
and when i try a usb card reader my system freezes after about 25 mb of file transfer and has to be rebooted ??
anyone know where i can get a driver or how to get it to recognize the built in one ???
many thanks

#209
lucioluzzatto

lucioluzzatto

    InsanelyMac Protégé

  • Just Joined
  • Pip
  • 3 posts
Hi I am really trying to put the my PCMCIA card controller working. I have tryied the solution on this post but did not succeeded because of some dificulties using the plist editor and changing the values. I am really desperate about yhis because I NEED to use a PCMCIA wireless as I will use an external antena plugged on it. My output on Linux is:

06:04.0 CardBus bridge: Texas Instruments Unknown device 8039
Subsystem: Toshiba America Info Systems Unknown device ff00
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at dc006000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 50000000-51fff000 (prefetchable)
Memory window 1: 52000000-53fff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
16-bit legacy interface ports at 0001

Is there any way that you could help me modifying the IOPCCardFamily driver? With my values?? I would be really thankfull and also would be able to post de driver to other Toshiba A135-S4527 users.

Thank you very much for your attention

Lucio Luzzatto.

Hi,

Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges).

The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me.

thanks probono for sharing this,
tuxx.



#210
tuxx

tuxx

    InsanelyMac Protégé

  • Members
  • PipPip
  • 87 posts
  • Gender:Male
Hi,

I just upated my 10.4.8 to 10.4.9 and my modified IOPCCardFamily.kext stopped working... I am using the same kext as before (replaced 10.4.9 one with my backup from 10.4.8)...

does anyone know why this might have happened?

Thanks,
tuxx

#211
tkman

tkman

    InsanelyMac Protégé

  • Members
  • Pip
  • 28 posts
I don't typically like to beg for help, but I'm just about to give up on this. Before I do that I'd like to see if anyone can help me figure this one out.

Specs:
IBM Thinkpad R51 2888-5RU/Jas 10.4.8 SSE2/SSE3

lspci -vvn from Ubuntu 7.04 shows:

02:00.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 03)
Subsystem: IBM Unknown device [1014:0560]
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: d4000000-d7fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001

I've been using wondergod's IOPCCardFamily.kext. I have modified Info.plist, and to the best of my ability the binary driver using ac44 as the device ID. I get the following in dmesg:

ACPI: System State [S0 S3 S4 S5] (S3)
IOPCCardBridge::start failed
Security auditing service present
BSM auditing present
disabled
From path: "uuid",
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><str
ing ID="2">boot-uuid-media</string></dict>
FireWire (OHCI): start - unable to get device memory
FireWire (OHCI): start - unable to get device memory

I've tried Glitchman's drivers as well a BugsBunny's IOPCIFamily.kext. Both recognize the IOPCCardBridge, but render the system unusable. I've only been able to recover from Glitchman's drivers.

Any ideas would be greatly appreciated, but at this point I've pretty much given up. :(

#212
nonamez78

nonamez78

    InsanelyMac Protégé

  • Members
  • Pip
  • 12 posts

Hi,

I just upated my 10.4.8 to 10.4.9 and my modified IOPCCardFamily.kext stopped working... I am using the same kext as before (replaced 10.4.9 one with my backup from 10.4.8)...


did you find a solution? my pcmcia won't work on 10.4.9, too.

#213
Alpha4

Alpha4

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts

hi am running osx 10.4.9, native on a toshiba satellite a135-s4427,
intel centrino duo 1.73,2gigs ram , intel 945GM express chipset,
just upgraded to the latest netkas kernel, which seemed to fix my sound,video,fsb,clock probs, but?
i have a built in texas inst 5 in 1 card reader which does not work at all ?
and when i try a usb card reader my system freezes after about 25 mb of file transfer and has to be rebooted ??
anyone know where i can get a driver or how to get it to recognize the built in one ???
many thanks


hi britt, can you help me? i've a toshiba a100-115 that i think should be similar.
i have 10.4.8 native and my pcmcia won't work. i can upgrade to 1.4.9.
After that, what I've to do?

this is my config from kanotix

07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff10
Flags: bus master, medium devsel, latency 168, IRQ 185
Memory at f0907000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 50000000-51fff000 (prefetchable)
Memory window 1: 52000000-53fff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001

can you post your kext?

#214
Dainix

Dainix

    Level 12 Warmage

  • Members
  • PipPipPipPip
  • 204 posts
  • Gender:Male
  • Location:In a Toaster Oven
  • Interests:15% APR for three years. After that, it's 20%.
Am attempting to get this kernel extension working. So far, it's mostly been failures to start up. I was able to get the extension to start up once, but right afterwords, the system locked up. It happened right before the Firewire driver initialization, in which someone suggested to disable it at the BIOS level, but this option wasn't available. I also noticed that the "Bad size" error I get could be triggered by my memory ranges, as two ranges conflict with each other. These ranges were, of course, taken from Windows XP.

I'll try to find the correct ranges tonight with a Linux Live CD, and see if the values differ at all. Wouldn't hurt to try both ACPI and non-ACPI, if I'm that desperate.

#215
Sysiphysus

Sysiphysus

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
can you send me the kext, thank you so much! my D620 id is 104c: 8036 too, thanks!!!

Hi,

Just wanted to let everyone know that i got this working on a Dell Latitude D610 (pccard controller id: 104c:8036). Ubuntu Live CD lspci dump gave me the wrong memory range (maybe an ACPI issue?). I used the windows information (4 memory ranges, 2 IO ranges).

The Motorola pcmcia wifi (broadcom chip) works perfectly now too. If anyone wants my kext, feel free to pm me.

thanks probono for sharing this,
tuxx.



#216
Sysiphysus

Sysiphysus

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
up~ ;)

can you send me the kext, thank you so much! my D620 id is 104c: 8036 too, thanks!!!



#217
britt

britt

    InsanelyMac Protégé

  • Members
  • Pip
  • 28 posts

hi britt, can you help me? i've a toshiba a100-115 that i think should be similar.
i have 10.4.8 native and my pcmcia won't work. i can upgrade to 1.4.9.
After that, what I've to do?

this is my config from kanotix

07:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
Subsystem: Toshiba America Info Systems Unknown device ff10
Flags: bus master, medium devsel, latency 168, IRQ 185
Memory at f0907000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 50000000-51fff000 (prefetchable)
Memory window 1: 52000000-53fff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001

can you post your kext?


i still havent managed to get mine working either, i am waiting till the next osx release with the hope that that will fix my issue ?sorry,britt

#218
Sysiphysus

Sysiphysus

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
I just want get the driver id=104c: 8036 ,anybody can help me? thanks!

#219
pspmac

pspmac

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
  • Gender:Male
  • Location:La Quinta, CA
I almost got my nc6320 working. I just replaced IOPCCardfamily.kext and that didn't work, kernal panic. Then i replaced all the files from the other post with the zip file extenstions.zip. And it saw the PC card but then i got USB wake event. But i saw that it saw the pc card TI xx12. So i have to put the orginal files back. I did edit the file and put in the memory address. Should i have to replace any other file than IOPCardfamily? Also that file doesn't exist. I can't seem to just add that file causes painc except for when i replaced them all. Any ideas? would really like to get this working so, i can get some kinda of wireless. I have a sony gc83 cell card that will work. Anyone know if it is possible to get the netgear wpn111 usb wireless working?


Thanks, this board has been super helpful, couldn't of gotten this far without everyones hard work!

#220
kizwan

kizwan

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 1,422 posts

I don't typically like to beg for help, but I'm just about to give up on this. Before I do that I'd like to see if anyone can help me figure this one out.

Specs:
IBM Thinkpad R51 2888-5RU/Jas 10.4.8 SSE2/SSE3

lspci -vvn from Ubuntu 7.04 shows:

02:00.0 CardBus bridge [0607]: Texas Instruments PCI4510 PC card Cardbus Controller [104c:ac44] (rev 03)
Subsystem: IBM Unknown device [1014:0560]
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=04, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: d4000000-d7fff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
16-bit legacy interface ports at 0001

I've been using wondergod's IOPCCardFamily.kext. I have modified Info.plist, and to the best of my ability the binary driver using ac44 as the device ID. I get the following in dmesg:

ACPI: System State [S0 S3 S4 S5] (S3)
IOPCCardBridge::start failed
Security auditing service present
BSM auditing present
disabled
From path: "uuid",
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><str
ing ID="2">boot-uuid-media</string></dict>
FireWire (OHCI): start - unable to get device memory
FireWire (OHCI): start - unable to get device memory

I've tried Glitchman's drivers as well a BugsBunny's IOPCIFamily.kext. Both recognize the IOPCCardBridge, but render the system unusable. I've only been able to recover from Glitchman's drivers.

Any ideas would be greatly appreciated, but at this point I've pretty much given up. :(


Did you try disable your FireWire at your bios? I think someone has suggest this before. :)





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy