338 replies to this topic

[beta992]

Is this the last beta/RC that is gonna be released? (D44)

I really can't wait for the final release.

[Regi Yassin]

Is this the last beta/RC that is gonna be released? (D44)

I really can't wait for the final release.

i think d44 would be the final release, just my thought.
apple release d44 so fast after the previous release d43.
even the final release has another build, i think its not a big difference between d44.

[mikethewolf]

I'm pretty sure I'm not helping anyone out, but I thought i'd share

I've got an Asus P8P67 Pro with a i5 2500k.

I am unable to get my HIS IceQ x2 7970 to work.

I am using the chameleon build from post 76, and the 12d44 10.8.3

I am stuck at boot0: done[lots of funny characters]

I'm booting from a single partition GUID drive (OCZ Vertex 3), and I've also tried booting it from the Installer USB. It boots fine when i've got a 9500GT in there, but the 7970 is a big no go.

[xpamamadeus]

I'm pretty sure I'm not helping anyone out, but I thought i'd share

I've got an Asus P8P67 Pro with a i5 2500k.

I am unable to get my HIS IceQ x2 7970 to work.

I am using the chameleon build from post 76, and the 12d44 10.8.3

I am stuck at boot0: done[lots of funny characters]

I'm booting from a single partition GUID drive (OCZ Vertex 3), and I've also tried booting it from the Installer USB. It boots fine when i've got a 9500GT in there, but the 7970 is a big no go.

Install Clover to usb and try it.

[sea_man]

I'm pretty sure I'm not helping anyone out, but I thought i'd share

I've got an Asus P8P67 Pro with a i5 2500k.

I am unable to get my HIS IceQ x2 7970 to work.

I am using the chameleon build from post 76, and the 12d44 10.8.3

I am stuck at boot0: done[lots of funny characters]

I'm booting from a single partition GUID drive (OCZ Vertex 3), and I've also tried booting it from the Installer USB. It boots fine when i've got a 9500GT in there, but the 7970 is a big no go.

Use the champlist bootloader.

[eep357]

I gotta use usb thumb drive with mbr, all hard drives are guid and will get boot 0-alien trext. will make a internal drive with mbr eventually

[slayer2333]

Hey guys, can anyone share the Nvidia kexts from the 12D43 or 44 (similar anyways) ?
Thanks.

[mikethewolf]

Install Clover to usb and try it.

Use the champlist bootloader.

I gotta use usb thumb drive with mbr, all hard drives are guid and will get boot 0-alien trext. will make a internal drive with mbr eventually

Thanks for the suggestions all.

I have tried Clover in the past, but not recently - I installed it and was still not able to boot

sea_man - I didn't mention it, but I have certainly tried to install the latest champist bootloader - still alien characters.

formatting my USB with mbr is probably a good idea, I will try that. Thank you.

I got fed up with my ASUS p8p67 pro, just build a PC for a friend with it and my stupid dead end radeon 6950s, I've got a shiney new Gigabyte Z77X-UP5-TH in the mail.

[xpamamadeus]

Thanks for the suggestions all.

I have tried Clover in the past, but not recently - I installed it and was still not able to boot

sea_man - I didn't mention it, but I have certainly tried to install the latest champist bootloader - still alien characters.

formatting my USB with mbr is probably a good idea, I will try that. Thank you.

I got fed up with my ASUS p8p67 pro, just build a PC for a friend with it and my stupid dead end radeon 6950s, I've got a shiney new Gigabyte Z77X-UP5-TH in the mail.

Install clover on mrb fat32 usb stick and boot it uefi mode.(press f8 and select name "uefi-name of stick"
U can use latest version http://sourceforge.n.../cloverefiboot/
only think after default for u its to copy hfsplus.efi to drivers64uefi folder.
U have ami board soo u need osxaptiofix.efi in that folder and and u must remove osxlowmemoryfix.efi from that folder.
Good luck.

[TurboC]

AMD 7850 works with AMD 7870 device ID forced in DSDT with Framebuffer Aji

AMD Radeon HD 7850:

Chipset Model: AMD Radeon HD 7850
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 2048 MB
Vendor: ATI (0x1002)
Device ID: 0x6818
Revision ID: 0x0000
Displays:
SyncMaster:
Resolution: 1920 x 1080 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: H1AK500000
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported

can you load on the net the kexts for the RADEON HD 7850?

[ccsr]

Why was my post taken down? Can I install this or not? Did I say something wrong?

[eep357]

Not sure about your prior post being removed, but I did read it. It's a developer preview which requires a paid Apple Developer account to download. It is also made to install on only apple hardware. That's all I have to say. The rest is up to you to decide on your own, but if you have to ask, then the answer is no.

[Rampage Dev]

can you load on the net the kexts for the RADEON HD 7850?

No. This is not permitted with beta releases. Furthermore you still need the DSDT edit. Do the work and do the research and you will be up and running in no time.

[ccsr]

Ok, thanks. I'll look into it.

[p.H]

http://9to5mac.com/2...0-to-developers
The new beta has just come out.
How is that ?

[mitch_de]

i DLing D50 and will look inside with pacifist whats changed (from D44).

[segfault]

 Screen Shot 2013-01-09 at 9.07.46.png   52.02KB   28 downloads

[Rampage Dev]

Working for me as well:

 Screen Shot 2013-01-09 at 5.44.06 AM.png   135.96KB   99 downloads

[k3nny]

Seems like there have been no changes for AMD video drivers.

[mitch_de]

for sure some (minor) changes in Graphics drivers (AMD+NVIDIA) but they may not "visible" for all gpu types or for all conditions. Both drivers, AMD + NV are new builds.
Also kernel is new and many other things - more changes than D43>D44 build.