127 replies to this topic

[beta992]

Riley Freeman, on 20 September 2012 - 01:28 PM, said:

Confusingly, the version is still 1.6. But the binary inside has changed. I md5-summed the old and new ones to see for myself.

Anyone who needed to rollback ACPIPlatform, are you using the ACPISensors or OemSMBIOS kexts? I'm just wondering what triggers the problem with the updated kext. I use Kozlek's HWSensors branch of FakeSMC but only with the CPU, GPU and MB sensor kexts.

Same here, but I also needed to rollback AppleACPIPlatform.kext to boot.

[Biso007]

Updated to 10.8.2 thru SW update but had to rollback AppleACPIPlatform.kext to an older version.

[tot318]

Update went fine using the 10.8.2 Combo Update, no problem. As usual for any update have to install back sound driver.

[mtek]

Does anyone know why does 10.8.2

AppleACPIPlatform.kext gives some odd users (like myself) trouble?

[JamesLittler]

Updated through app store, no issues what so ever.

[Himlaklar]

Upon further use i noticed that GTX 670 drivers have only OpenGL 2.1 and lower.

And Starcraft 2 crashes.

[pepto]

I have updated my Dell Optiplex 780 thru 10.8.2 combo update after that reinstalled chameleon and rebooted with success no KP or what ever
I wanna update the OSX wiki page for my system but there is no 10.8.2 page yet.

[JackButler]

used combo updater, had to re- AppleHDA.kext via kexthelper.

No problems noticed so far.

[tdtran1025]

Riley Freeman, on 20 September 2012 - 01:28 PM, said:

Confusingly, the version is still 1.6. But the binary inside has changed. I md5-summed the old and new ones to see for myself.

Anyone who needed to rollback ACPIPlatform, are you using the ACPISensors or OemSMBIOS kexts? I'm just wondering what triggers the problem with the updated kext. I use Kozlek's HWSensors branch of FakeSMC but only with the CPU, GPU and MB sensor kexts.

I am using the same HWSensors and I never have any issue with KP. Maybe it's board specific since we all use hack.

[robertx]

opencl fix for the fermi 5xxx ...

robertx, on 20 September 2012 - 10:30 PM, said:

for the stock 10.8.2 drivers (8.0.61 295.30.20f02 version) this fix still works

"So, open up a hex editor of your liking and do this:
open /System/Library/Extensions/GeForceGLDriver.bundle/Contents/MacOS/libclh.dylib (as root or with sudo)
find: 8B 87 1C 0C 00 00 89 06 8B 87 20 0C 00 00 89 02
replace by: 31 C0 FF C0 FF C0 89 06 31 C0 89 02 90 90 90 90
save
reboot is not required, but recommended" from the first post...

...works for me..

[xela]

khe91, on 20 September 2012 - 11:06 AM, said:

After I disabled VT-d in BIOS it also works with the original 10.8.2. AppleACPIPlatform.kext.
Using a Gigabyte GA-Z77X-UP5 TH with BIOS F9.

Hi, I have "IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA" error message from console. The USB port not charging iPad.

Have to roll back to 10.8.1 IOUSBFamily.kext to fix the problem .. do u have to do that ?

BTW, nice to see you here.

Himlaklar, on 20 September 2012 - 06:48 PM, said:

Upon further use i noticed that GTX 670 drivers have only OpenGL 2.1 and lower.

And Starcraft 2 crashes.

hey i got mine running fine ...

[khe91]

xela, on 21 September 2012 - 02:16 AM, said:

Hi, I have "IOUSBFamily did not receive enough extra current for the SuperSpeed device (4-Port USB 3.0 Hub) at 0x14c00000, asked for 400mA but got 0 mA" error message from console. The USB port not charging iPad.

Have to roll back to 10.8.1 IOUSBFamily.kext to fix the problem .. do u have to do that ?

I got the same messages, still the USB 3.0 ports are working for external hard disks. Didn't try if they can charge devices.

[Cavendish Qi]

unixservice, on 19 September 2012 - 06:28 PM, said:

if your computer wont boot or acpi state not working try this kext.

AppleACPIPlatform.kext.zip

Hi, unixservice,

Thanks for your patched kext at first. Would you like to share more about how to modify it manually? Thanks a lot.

[p.H]

b0dyr0ck2008, on 20 September 2012 - 10:50 AM, said:

Removed oemsmbios and repaired permissions etc. now got Voodoohda KP so going to delete that and see what happens

voodoohda and applehda cannot stay together
you have to remove one of them.

[Slice]

JamesLittler, on 20 September 2012 - 06:47 PM, said:

Updated through app store, no issues what so ever.

+1

p.H, on 21 September 2012 - 06:56 AM, said:

voodoohda and applehda cannot stay together
you have to remove one of them.

Just use AppleHDADisabler and don't bother about updates.

[p.H]

Slice, on 21 September 2012 - 06:59 AM, said:

Just use AppleHDADisabler and don't bother about updates.

Hi, slice.
I once use a application which can disable any kexts.
So voodoohda and applehda can stay together.

by the way, I want to know is clover able to restart after kernel panic ?

[Slice]

p.H, on 21 September 2012 - 07:03 AM, said:

Hi, slice.
I once use a application which can disable any kexts.
So voodoohda and applehda can stay together.

by the way, I want to know is clover able to restart after kernel panic ?

This is kernel function, not bootloader.
sudo pmset autorestart 0

[p.H]

Slice, on 21 September 2012 - 07:35 AM, said:

This is kernel function, not bootloader.
sudo pmset autorestart 0

well, I look into the pmset command in terminal
it says like this.

autorestart - automatic restart on [b]power loss[/b] (value = 0/1)

does power loss equal to kernel panic ?

[Peter_sm]

After upgrade sleep is not working (using lid and from menu)
Battery Icon is gone

Anyone know a solution ?

HP laptop DV8, see my sig

//Peter

[artur-pt]

Peter_sm, on 21 September 2012 - 07:51 AM, said:

After upgrade sleep is not working (using lid and from menu)
Battery Icon is gone

Anyone know a solution ?

HP laptop DV8, see my sig

//Peter

hello

if u use any kext for the battery must install all again, and maybe resolve u sleep problem

because the battery kext use another appleacpiplatform

good hack