157 replies to this topic

[robertx]

...AGPM ...again needs adjusting for full-speed gfx(nvidia)GT 520

[p.H]

robertx, on 10 May 2012 - 04:19 AM, said:

...AGPM ...again needs adjusting for full-speed gfx(nvidia)GT 520

Are there more infos related to ATI AGPM ?
I can't find it though

[Ricksterm]

The update has been quite messy for me on my laptop, having SMC issues, lots of SMCReadyKeyAction errors in the kernal log. My wifi kext got overwritten and I can't remember the method I used to get it working with 10.7.3, Voodoo battery isn't working properly, so OS X thinks it's running on battery when it's not.

[robertx]

p.H, on 10 May 2012 - 04:22 AM, said:

Are there more infos related to ATI AGPM ?
I can't find it though

..in the infoplist of AGPM there are model identifiers...in model IMac 12,2 there are ati gfx ids...Vendor1002Device6720...Vendor1002Device6722...Vendor1002Device6740 and in MacBookPro8,2... Vendor1002Device6760...Vendor1002Device6741...that's just at a glance though...(set model in smbios.plist) i use champlist for that...

any way....seems ok here now....
 10.7.4.png   67.56K   185 downloads

[p.H]

robertx, on 10 May 2012 - 04:40 AM, said:

..in the infoplist of AGPM there are model identifiers...in model IMac 12,2 there are ati gfx ids...Vendor1002Device6720...Vendor1002Device6722...Vendor1002Device6740 and in MacBookPro8,2... Vendor1002Device6760...Vendor1002Device6741...that's just at a glance though...(set model in smbios.plist) i use champlist for that... any way....seems ok here now.... 10.7.4.png

I already know this.
But unlike Nvidia Card, the arguements for ATI inside plist are not clear
I tried to make it work, but it shows in console that "G-state set to 0 from 0"

[mlstudio]

SMC::smcReadKeyAction ERROR PH1Z kSMCBadArgumentError(0x89)

[robertx]

p.H, on 10 May 2012 - 04:57 AM, said:

I already know this.
But unlike Nvidia Card, the arguements for ATI inside plist are not clear
I tried to make it work, but it shows in console that "G-state set to 0 from 0"

...try to post this problem in ATI section of Graphicscards  it's a fairly active forum... and good luck

[p.H]

robertx, on 10 May 2012 - 05:21 AM, said:

...try to post this problem in ATI section of Graphicscards it's a fairly active forum... and good luck

thanks，I'm gonna give it a shot

[thom@sp@yne]

Hello, hackintosh noob here.

Just updated my hackintosh laptop (XPS M1530) running Lion 10.7.3 to 10.7.4. Unfortunately, it encountered a [PCI configuration begin] hang. I suspect that my Graphic Card is causing the problem. It's a 8600M GT.

Tried various boot flags, notably npci=0x2000, but so far no headway. Any advice from you guys?

[anywho]

lost networking on GA-X58A-UD3R. Anyone have link to kext I can use?  (Realtek RTL8111E chip)

[BugsB]

had to remove sleepenabler.kext from E/E to move beyond instant restart

oddly enough now w. 10.7.4 sleep and wake-up suddenly work even w/o sleepenabler, LOL

[drnick]

anywho, on 10 May 2012 - 06:44 AM, said:

lost networking on GA-X58A-UD3R. Anyone have link to kext I can use?  (Realtek RTL8111E chip)

hope this helps http://lnx2mac.blogs...osx-driver.html

[quis]

Replaced the AppleSMC.kext from 10.7.3 and worked fine since. But my ALC888 is dead again and the old one won't work...
Btw I got stuck before the loginwindow shows up for a good while, and everything seems to be a little slow on my end, not sure if it's also other people or just me...

EDIT: Speed seems to be normal now; must be the cache being rebuilt...

[DarwinX]

thom@sp@yne, on 10 May 2012 - 06:08 AM, said:

Hello, hackintosh noob here.

Just updated my hackintosh laptop (XPS M1530) running Lion 10.7.3 to 10.7.4. Unfortunately, it encountered a [PCI configuration begin] hang. I suspect that my Graphic Card is causing the problem. It's a 8600M GT.

Tried various boot flags, notably npci=0x2000, but so far no headway. Any advice from you guys?

While the system kext regression is never optimal, as a temporary or possibly permanent solution, roll back (revert) the latest
10.7.4 AppleACPIPlatform.kext version 1.5 to the 10.6.x AppleACPIPlatform.kext version 1.3.5.

 AppleACPIPlatform.kext.v1.3.5.zip   407.18K   874 downloads

[nyolc8]

Can someone upload the stock 10.7.4 AppleHDA? I wanted to mod it to my alc662 when I accidentally modded the backup file... ._.

edit.: nevermind, it works

[thom@sp@yne]

DarwinX, on 10 May 2012 - 12:00 PM, said:

While the system kext regression is never optimal, as a temporary or possibly permanent solution, roll back (revert) the latest
10.7.4 AppleACPIPlatform.kext version 1.5 to the 10.6.x AppleACPIPlatform.kext version 1.3.5.

AppleACPIPlatform.kext.v1.3.5.zip

Thanks for the reply. I'll try it out and see whether it works or not. Will post back with results.

[Derty]

applesmc.kext from 10.7.3

Attached Files

•  AppleSMC.kext.zip   55.14K   388 downloads

[Riley Freeman]

robertx, on 10 May 2012 - 04:19 AM, said:

...AGPM ...again needs adjusting for full-speed gfx(nvidia)GT 520

What's the version number of the nvidia drivers? I was hoping they might be at a similar state to the ML ones. They appear to have working power management without any kext edits.

[Greggen]

What are these SMC errors all about? Seems like they are effecting real macs as well, at least my MacBook Pro (and some folks on apples official forum). Replacing with 10.7.3 kext doesn't really seem like the right solution in the long-run. And ML DP3 doesn't have the errors so I would guess they just screwed up and there will be an official fix sooner or later =)

EDIT: Otherwise, totally pain-less. Haven't done a thing afterwards.

[iRipper]

Updated fine here