Hacktrix2006

Hi all just done a clean install of Mavericks and i made sure i downloaded the latest drive for the BCM5906M now in 10.8.4 it was working without issues but in 10.9 nothing its. All i see in console is 18/11/2013 21:29:23.000 kernel[0]: my_name_adlan_BCM5722D: Failed to register interrupt source and 18/11/2013 21:38:44.263 com.apple.kextcache[483]: kext my.name.adlan.BCM5722D 203059000 is in exception list, allowing to load Any ideas on getting this Lan card working in Mavericks ??? thanks in advance

Anyone managed to get this SD-Card reader working yet. DivID: 0x0139=313 VenID: 0x0bda=3034 I have found on mine that its connected to the USB3.0 as with USB 3.0 from NEC the USB-CRW doesn't even show. Reason i ask is ordadmiral Drake has the following DivID: 0x0139=312 VenID: 0x0bda=3034 with everything working yet the DivID: 0x0139=313 VenID: 0x0bda=3034 is not working as the last mA reading is not detecting.

i have patched the installer so SMBIOS change is needed if anyone wants it.

Sorry about the links, i took the site down due to no longer having the laptop in a working order.

BisonCam will work when your GFX cards work as i have the same Webcam mate and it was working for me when i had mac installed!

Killer 1102 and 1103 will not work in Mac due to the firmware on the Wifi card. I have a 1102 but had to swap for Qualcomm Atheros AR5B93 Wireless Network Adapter. So sorry as far as i know Killer Wifi cards do not work on Mac Osx 10.7 or 10.8

Thanks for info. I have tried andy's tool but got loads of errors FFFFF and crud. I have read the howto micky made it made it clear for me to do the codec verbs but its the tracing from the SVG to the platform and layout12.xml i get confused with. I just had another try now editing the platforms.xml file and now all inputs and outputs show as Internal Speaker with no sound coming out LOL. I am new to this, was so used to having VoodooHDA on my old laptop then tried it on this new one and boy the laptop hates it. As for toleda's kexts even though they showed a output and input in sound prefs no sound came out which is why i knew the problem was related down to pinouts, yet when i was messing with layout 1 and 12 from native applehda i got Internal mic working. Codec: Realtek ID 892 Address: 0 DevID: 283904146 (283904146) which means i start with 01 in my codec verb. Jack Color Description Node PinDefault Modified Verbs -------------------------------------------------------------------------------------------------------- ATAPI Unknown Mic at Int ATAPI 18 18 2577598784 01271c40 01271d00 01271ea3 01271f90 1/8 Green HP Out at Ext Rear 20 20 18957343 01471c10 01471d40 01471e21 01471f01 1/8 Grey Line Out at Ext Rear 23 23 16850964 01771c50 01771d20 01771e01 01771f01 1/8 Pink Mic at Ext Rear 24 24 27367472 01871c30 01871d90 01871ea1 01871f01 1/8 Blue Line In at Ext Rear 26 26 25243711 01a71c60 01a71d30 01a71e81 01a71f01 Speaker at Int ATAPI 27 27 2568159504 01b71c70 01b71d00 01b71e13 01b71f90 ATAPI Unknown Line In at Int ATAPI 29 29 1501757936 01d71cf0 01d71d00 01d71e83 01d71f50 Optical Green SPDIF Out at Ext Rear 30 30 21315872 01e71c20 01e71d40 01e71e45 01e71f01 ----------------------------------------------------------------------------------------------------- Which then verbit spat out this New 71c Associations Before After -------------------------------------------------- 01271c40 01271c40 01271d09 01271ea3 01271f99 01471c1f 01471c10 01471d44 01471e21 01471f01 01771c14 01771c50 01771d20 01771e01 01771f01 01871c30 01871c30 01871d98 01871ea1 01871f01 01a71c3f 01a71c60 01a71d30 01a71e81 01a71f01 01b71c10 01b71c70 01b71d01 01b71e13 01b71f99 01d71cf0 01d71cf0 01d71d01 01d71e83 01d71f59 01e71c20 01e71c20 01e71d41 01e71e45 01e71f01 Reset 71d Misc to 0 New 71d Associations Before After -------------------------------------------------- 01271d09 01271c40 01271d00 01271ea3 01271f99 01471d44 01471c10 01471d40 01471e21 01471f01 01771d20 01771c50 01771d20 01771e01 01771f01 01871d98 01871c30 01871d90 01871ea1 01871f01 01a71d30 01a71c60 01a71d30 01a71e81 01a71f01 01b71d01 01b71c70 01b71d00 01b71e13 01b71f99 01d71d01 01d71cf0 01d71d00 01d71e83 01d71f59 01e71d41 01e71c20 01e71d40 01e71e45 01e71f01 Correct 71f 02 FP to 01 New 71f Associations Before After -------------------------------------------------- 01271d09 01271c40 01271d00 01271ea3 01271f90 01471d44 01471c10 01471d40 01471e21 01471f01 01771d20 01771c50 01771d20 01771e01 01771f01 01871d98 01871c30 01871d90 01871ea1 01871f01 01a71d30 01a71c60 01a71d30 01a71e81 01a71f01 01b71d01 01b71c70 01b71d00 01b71e13 01b71f90 01d71d01 01d71cf0 01d71d00 01d71e83 01d71f50 01e71d41 01e71c20 01e71d40 01e71e45 01e71f01 Now i have tried the bottom one and the middle one as i have a Green Misc which is 4 hence why verbit reset it to 0. I done a table node output which then showed. Node are Number into () (xx) at end of line is pointer to "Node (xx)" only follow 1 time (xx) at end of line NodeID is (xx) (xx) (xx) scheme Example : Node (9) [Audio Input] Stereo Amp-In => (34) || Node (34) [Audio Mixer] Stereo Amp-In => (24) 25 26 27 28 29 20 21 22 23 11 => NodeID 9 is (9-34-24) in codecgraph svg's file => Audio input are RED's eliptic (*) are NID connection in use when alsa make dump Table node for : MS_16F2-codec_0-Realtek_ID_892.txt =================================================== Node (2) [Audio Output] Stereo Amp-Out Node (3) [Audio Output] Stereo Amp-Out Node (4) [Audio Output] Stereo Amp-Out Node (5) [Audio Output] Stereo Amp-Out Node (6) [Audio Output] Stereo Digital Node (7) [Vendor Defined Widget] Mono Node (8) [Audio Input] Stereo Amp-In => (35) Node (9) [Audio Input] Stereo Amp-In => (34) Node (10) [Audio Input] Stereo Digital => (31) Node (11) [Audio Mixer] Stereo Amp-In => (24) 25 26 27 28 29 20 21 22 23 Node (12) [Audio Mixer] Stereo Amp-In => (2) 11 Node (13) [Audio Mixer] Stereo Amp-In => (3) 11 Node (14) [Audio Mixer] Stereo Amp-In => (4) 11 Node (15) [Audio Mixer] Stereo Amp-In => (5) 11 Node (16) [Audio Output] Stereo Digital Node (17) [Pin Complex] Stereo Digital => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear => (16) Node (18) [Pin Complex] Stereo => (Pin) Default 2577598784: [Fixed] Mic at Int ATAPI Node (19) [Vendor Defined Widget] Mono Node (20) [Pin Complex] Stereo Amp-Out => (Pin) Default 18957343: [Jack] HP Out at Ext Rear => (12) Node (21) [Pin Complex] Stereo Amp-Out => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear => (13) Node (22) [Pin Complex] Stereo Amp-Out => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear => (14) Node (23) [Pin Complex] Stereo Amp-Out => (Pin) Default 16850964: [Jack] Line Out at Ext Rear => (15) Node (24) [Pin Complex] Stereo Amp-In Amp-Out => (Pin) Default 27367472: [Jack] Mic at Ext Rear => (12) 13 14 15* 38 Node (25) [Pin Complex] Stereo Amp-In Amp-Out => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear => (12*) 13 14 15 38 Node (26) [Pin Complex] Stereo Amp-In Amp-Out => (Pin) Default 25243711: [Jack] Line In at Ext Rear => (12*) 13 14 15 38 Node (27) [Pin Complex] Stereo Amp-In Amp-Out => (Pin) Default 2568159504: [Fixed] Speaker at Int ATAPI => (12*) 13 14 15 38 Node (28) [Pin Complex] Stereo => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear Node (29) [Pin Complex] Mono => (Pin) Default 1501757936: [N/A] Line In at Int ATAPI Node (30) [Pin Complex] Stereo Digital => (Pin) Default 21315872: [Jack] SPDIF Out at Ext Rear => (6) Node (31) [Pin Complex] Stereo Digital => (Pin) Default 1091637744: [N/A] Speaker at Ext Rear Node (32) [Vendor Defined Widget] Mono Node (33) [Vendor Defined Widget] Mono Node (34) [Audio Mixer] Stereo Amp-In => (24) 25 26 27 28 29 20 21 22 23 11 18 Node (35) [Audio Mixer] Stereo Amp-In => (24) 25 26 27 28 29 20 21 22 23 11 Node (36) [Vendor Defined Widget] Mono Node (37) [Audio Output] Stereo Amp-Out Node (38) [Audio Mixer] Stereo Amp-In => (37) 11 so now you can understand why i am so confused. But thanks for the tips though. All i do know which might help is what ever codec is set and if its wrong i.e no sound output through itunes when i boot back into windows i get no sound as it seems the EC Firmware on the laptop and the NVRAM gets wrote to with the wrong codec which means i off to reboot and reflash just the EC Firmware to get the sound back on my windows install.

Thank you mate, hoping it will work on Laptop version i have as Desktop and Laptop have different pinout as far as i can tell via the SVG. Will let you know though. Riley just tried, Even though i have the same ALC892 chip my pinouts are all different so i am going to compare yours and see if i can mod the file to mine using yours as a ruff base. Thanks mate though.

Micky your a classic. Problem is how can one parse a .svg file how ever i have found this http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio.txt interesting read though.

Hi right i have managed to Bin patch the AppleHDA.kext to ALC892 i have inserted the codec, but wondered if someone could help me with layout12.xml and platforms.xml i am completely lost with the pinout/nodes. Please help me.

Thats the main issue i have, I have the Codec Verbs not a problem i look at the pinout and its a brain mess for me. A script that could say do the Verb and Read the SVG file then parse it to .xml would be great. But how one can do that i don't know. From reading the how too's the main issue really is layout and platforms.xml thats where most get stuck.

Thats ok bcc9. I looked in the script and its a great idea what you are doing its just a shame there is no way you can get the script to do everything for you. I.e mod the Platforms.xml.zlib Layoutxx.xml.zlib and info.plist automatically with everything needed to get the sound working. Will try version 0.9 tonight.!

Hi Bcc this look promising and a very great idea. I have just downloaded script 0.8 and there happens to be a set of errors throwing out here. syntax error at /users/solidus1983/desktop/AudioPatching/hda/patch-hda.pl line 320, near ") exit" syntax error at /users/solidus1983/desktop/AudioPatching/hda/patch-hda.pl line 322, near ") exit" syntax error at /users/solidus1983/desktop/AudioPatching/hda/patch-hda.pl line 324, near ") exit" syntax error at /users/solidus1983/desktop/AudioPatching/hda/patch-hda.pl line 326, near ") exit" syntax error at /users/solidus1983/desktop/AudioPatching/hda/patch-hda.pl line 328, near ") exit" Doesn't matter if you run the patch-hda.pl or patch-hda same error.

Hi i was wondering if someone could patch me a 10.8.2 AppleHDA.kext for a ALC 892 Msi Laptop. I have tried myself and can only get one thing working at a time it then does something to my EC Firmware and then i loose sound. Would like a modded layout1 please. I have had success with Internal Mic, Ext-Mic, Headphones, Speakers but i couldn't get them all working together i even had auto switching working at one time. Thanks! Codec Dump, Verbs, SVG's: https://docs.google....UHF3am1BVkxGSmM None of the AppleHDA's i have tried has worked something to do with how MSI done the 892. Most of the time i have use the cough cough not allowed name and thats always not worked right but a native applehda.kext from the 10.8.2 was producing better results. Thanks in advance I only have sound and the SDcard to sort and sound is important. MS_16F2-codec_0-Realtek_ID_892.zip

Mine freezes on UEFI after loading kernelcache it doesn't proceed no errors though.