[pre-release] macOS Ventura

[Stefanalmare]

8 minutes ago, miliuco said:

@Stefanalmare

 

OC Little Translated has this text:

 

"I had a look at the config.plist included in OCLP, copied the relevant patches Booter and Kernel patches (and a few others) into my config and tested them. The attached plist contains the patches."

 

It's in the 09_Board-ID_VMM-Spoof section. So, at least some patches are extracted from OCLP. Looking at your config.plist, the patches reminded me of the OCLP ones.

You asked me where I found this patches. I answered. The original sources, I don't know.

[Stefanalmare]

8 minutes ago, PoMpIs said:

 

That EFI is for a laptop, it will probably change with respect to a desktop... I say this in case you are using it on the computer of your signature.

 

@Stefanalmare  The sleep mode does not work for me, well it works but it never wakes up 😆, not even with the power button... 

 

Does it work for you?

I already gave him a working EFI for his mobo (I have one rig functional with Ventura inside, with this very motherboard). He don't know to adapt it for his hardware. I can't do more.
Yes sleep works, but because of laptop specific, it wake just from button.

[miliuco]

25 minutes ago, Stefanalmare said:

You asked me where I found this patches. I answered. The original sources, I don't know.

Sorry if I disturbed you, it was not my intention. I was only moved by curiosity to know the origin of things. OC Little is a very useful site. And OCLP is a derivative of OC with a gigantic work behind it. I follow them both and learn from them. You often help others. Maybe my English is not the best possible.

[Stefanalmare]

Jjejejjejejej. Campeón, lo se. No problems. I'm also following OCLP work (huge work) and Macrumors.

[bestal]

1 hour ago, PoMpIs said:

 

O EFI laptop için, masaüstüne göre büyük ihtimalle değişecektir... İmzanızın bilgisayarında kullanıyorsanız diye söylüyorum.

 

@Stefanalmare  Uyku modu bende çalışmıyor, iyi çalışıyor ama hiç uyanmıyor 😆 , güç düğmesiyle bile... 

 

Senin için çalışıyor mu?

yes i know my pc desktop

I've been dealing with it for about 4 months.

I thought knowledgeable people would help.

thanks...

 

 

 

 

[Stefanalmare]

29 minutes ago, ruslan61 said:

yes i know my pc desktop

I've been dealing with it for about 4 months.

I thought knowledgeable people would help.

thanks...

 

 

 

 

Try this:

EFI.zip

[ndungu6678]

Beta 11

 

 

Build 1: iMac20,2, i5-9400F, Samsung 16GB DDR4 RAM, MSI Z390 Gaming Plus, Radeon RX 580 8GB, OC 0.8.6

Edited October 14, 2022 by ndungu6678

[陈军鹏]

4 hours ago, ruslan61 said:

@Stefanalmare

我尝试了你的efi，它打开了，但不幸的是它停留在黑屏上。😒

我不知道我做错了哪里？

bios PEG中的 igpu 设置，支持英特尔 hd4000 （64MHz），即使在蒙特雷 12.6 中，它也使用 rx560 启动。

我的BIOS设置还可以，我更改了hdmi端口，我等了半个小时，苹果标志没有出现。

谢谢你的帮助好人

boot-args:-V -X 

safe mode

[analise]

I manage to install Ventura in my Surface Pro 3, working as expected. Unfortunately I was not able to accelerate the HD4400 even with OCLP5, everytime I apply that causes the system to stop booting.

Any tips that I could try, would be appreciated.

 

Thanks,
Paulo

[Stefanalmare]

1 hour ago, analise said:

I manage to install Ventura in my Surface Pro 3, working as expected. Unfortunately I was not able to accelerate the HD4400 even with OCLP5, everytime I apply that causes the system to stop booting.

Any tips that I could try, would be appreciated.

 

Thanks,
Paulo

I have a laptop Asus with Ventura installed and working well, with HD4400:

 

Spoiler

 

And my settings for HD4400 are:

 

Spoiler

 

Edited October 14, 2022 by Stefanalmare

[analise]

9 minutes ago, Stefanalmare said:

I have an laptop Asus with Ventura installed and working well, with HD4400:

 

  Reveal hidden contents

 

And my settings for HD4400 are:

 

  Hide contents

 

Thanks Stefanalmare, I don't have all those settings I will try it and report back.

 

[Stefanalmare]

On 10/10/2022 at 5:54 PM, Stefanalmare said:

It is a known issue XPCM fails on Ventura Ivy Bridge. OCPL devs are working on this. The solution given here (https://github.com/dortania/OpenCore-Legacy-Patcher/commit/964697a2c11f3f9c1ff6f0aa6919ba82200f1720) for sure need some SMBIOS's and patches. I haven't discovered yet. I have 4 Ivy's rigs I'm playing with, 3 desktop and 1 laptop, All 3 desktop have XPCM enable, laptop don't.

About Ventura, Ivy Bridge, Power Management, XPCM: I made a mistake in the laptop configuration. All Ivy's I own are having XPCM and Power Management working.

10 minutes ago, analise said:

Thanks Stefanalmare, I don't have all those settings I will try it and report back.

 

Don't forget Lilu and WhateverGreen.

Edited October 14, 2022 by Stefanalmare

[bestal]

12 hours ago, Stefanalmare said:

Ve ışığınız olmayacak çünkü Polaris GPU, ne yaparsanız yapın AVX2'ye ihtiyaç duyar. GPU'yu değiştirin veya HD4000 ile kalın (ancak her güncellemede zorluk yaşarsınız). Buraya bak:

"Ventura'da AVX2.0'a dayanan grafik mimarileri:

AMD Polaris (RX400/500)

AMD Vega (48/56/64/VII)

AMD Navi (RX5000/6000)"

https://github.com/dortania/OpenCore-Legacy-Patcher/issues/998

 

Güncelleme! Daha fazlasını okuyarak şunu buldum:

https://github.com/dortania/OpenCore-Legacy-Patcher/issues/1008

OCLP, AVX2 işlemcisi yoksa Polaris'i destekler. Ancak OCLP'yi uygularken sorun yaşarsınız, çünkü Polaris ile giriş yapamazsınız ve HD4000 kullanarak yükleseniz bile, OCLP sihrini yapana kadar aynı şekilde çalışmayacaktır. Yalnızca IGPU HD4000'li donanımımda, Ventura'yı kurduğumda veya güncellediğimde eski bir AMD GPU (BIOS'ta CSM'yi geçici olarak etkinleştir) kullanıyorum, oturum aç, OCLP uygula, GPU'yu kaldır (BIOS'ta yalnızca UEFI'yi geri yükle) ve çalışıyor.

Peki senin yerine ne yapacağım:

1. Eski bir GPU (NVIDIA, AMD) bulun ve ana gibi kurun. Polaris'inizi başka bir yuvaya koyun. Önyüklemek için BIOS'ta CSM'yi etkinleştirmeniz gerekip gerekmediğine bakın.

2. Ventura'yı kurun ve giriş ekranı için dua edin.

3. OCLP'yi uygulayın.

4. Eski GPU'yu çıkarın (BIOS'ta yalnızca UEFI'yi etkinleştirin) ve ana yuvada Polaris'i değiştirin. Bu noktaya geldiyseniz, gitmekte fayda var.

@Stefanalmare

I gave you the trouble, I am forever grateful for your support.😔

can you please prepare efi for hd4000🙏

Thanks..

 

[analise]

3 hours ago, Stefanalmare said:

About Ventura, Ivy Bridge, Power Management, XPCM: I made a mistake in the laptop configuration. All Ivy's I own are having XPCM and Power Management working.

Don't forget Lilu and WhateverGreen.

 

No didn't work. I have Lily and whatever green kext.

Thanks

 

[greythorne]

Just wanna check.

 

Does anyone face issues with Bluetooth? It appears that when my Jabra ear piece cannot receive any sound. I am using a Bluetooth dongle which was working all the while until I updated to Beta 11. The kext BlueToolFixup is also enabled. This Bluetooth dongle do not need kext.

[陈军鹏]

On 10/14/2022 at 3:26 AM, axonleo said:

Guys i need help creating opencore efi folder that can boot and install ventura beta 11 ? What kext, smbios and config file do i need to configure for x79 and 3930k cpu ?

EFI.zip

X79 2690v2 

boot-args:-X 

 

[axonleo]

4 hours ago, 陈军鹏 said:

EFI.zip 6.2 MB · 10 downloads

X79 2690v2 

boot-args:-X 

 

Could you please change the language to english and retake the screenshots also in bigger screen resolution so i can read the text ?

I tried to boot with ur efi folder but getting stuck here https://imgur.com/cJBlR8o and even added -x in the boot args and that didnt help ? even tried to select imac pro1.1 but oc configurator is not saving my changes for some reason when selecting smbios... why is that happening ? i have lastest oc configuration 2.62.1.0

[陈军鹏]

4 hours ago, axonleo said:

Could you please change the language to english and retake the screenshots also in bigger screen resolution so i can read the text ?

I tried to boot with ur efi folder but getting stuck here https://imgur.com/cJBlR8o and even added -x in the boot args and that didnt help ? even tried to select imac pro1.1 but oc configurator is not saving my changes for some reason when selecting smbios... why is that happening ? i have lastest oc configuration 2.62.1.0

configuration editor:Propertree.  https://github.com/corpnewt/ProperTree

My efi has not added any dsdt patches，The dsdt patch is in my bios。

The correct installation will enter the black screen at the end

-X needs to restart after the black screen

 

System DSDT.aml

[ndungu6678]

12 hours ago, greythorne said:

Just wanna check.

 

Does anyone face issues with Bluetooth? It appears that when my Jabra ear piece cannot receive any sound. I am using a Bluetooth dongle which was working all the while until I updated to Beta 11. The kext BlueToolFixup is also enabled. This Bluetooth dongle do not need kext.

I have a Logitech bluetooth wireless keyboard and Logitech Bluetooth Headphones which are always working after all updates with no problems (currently on beta 11)-do you have the following 3 highlighted kexts in your EFI kexts folder cause that's all I use ?( I have OC 0.8.6). Just a suggestion -not saying this may be the solution!:

 

Build 1: iMac20,2, i5-9400F, Samsung 16GB DDR4 RAM, MSI Z390 Gaming Plus, Radeon RX 580 8GB, OC 0.8.6

Edited October 15, 2022 by ndungu6678

[bestal]

On 10/14/2022 at 2:52 PM, 陈军鹏 said:

boot-args:-V -X 

safe mode

I added -x

mac os not suppoted

didn't both monterey and ventura boot?😇

[PoMpIs]

@Stefanalmare  

 

Could you confirm if on your laptop with the HD4000 you get this like this:

 

 

And another question... in Ventura the micro never reaches 3300Mhz turbo:

 

Ventura:

 

 

Old capture from when I had monterey:

 

 

Is this so in ventura or has a solution???

 

Cheers 

 

 

[axonleo]

7 hours ago, 陈军鹏 said:

configuration editor:Propertree.  https://github.com/corpnewt/ProperTree

My efi has not added any dsdt patches，The dsdt patch is in my bios。

The correct installation will enter the black screen at the end

-X needs to restart after the black screen

 

System DSDT.aml 28.11 kB · 1 download

what other smbios have u tried to boot ur x79 board ? i think imac pro1.1 is not working for me or maybe some other setting or ssdt file is messing things up ? 😕

Edited October 15, 2022 by axonleo

[axonleo]

So i made huge progress now  i booted the installer with imac pro1.1 smbio and my dsdt.aml file, EC, HPET and usbmap.kext but i still cant get usb mouse and keyboard to work so i cant do much in the installer  but when i boot with macpro6.1 smbios the mouse and keyboard works fine but then ventura tells me this installer is not compatible with this system so i cant do much either beside creating new partition in disk utility and surfing the web with safari 😕

Please check my edit EFI folder and tell me how to fix the usb problem ?

EFI ventura x79.zip

Edited October 15, 2022 by axonleo

[STLVNUB]

try changing USB ports on your case with your USB installer

[陈军鹏]

4 hours ago, axonleo said:

So i made huge progress now  i booted the installer with imac pro1.1 smbio and my dsdt.aml file, EC, HPET and usbmap.kext but i still cant get usb mouse and keyboard to work so i cant do much in the installer  but when i boot with macpro6.1 smbios the mouse and keyboard works fine but then ventura tells me this installer is not compatible with this system so i cant do much either beside creating new partition in disk utility and surfing the web with safari 😕

Please check my edit EFI folder and tell me how to fix the usb problem ?

EFI ventura x79.zip 6.29 MB · 3 downloads

You need to modify here