deeveedee Posted December 19, 2023 Share Posted December 19, 2023 (edited) @droples That makes sense. Maybe we need to enable FixupAppleEfiImages quirk? EDIT: I enabled Booter > FixupAppleEfiImages quirk and attempted to use the OC 0.9.7 LegacyBoot utility, but it did not work for me. There must be another step necessary for use of the new LegacyBoot utility. After my failed test, I reverted to the OC 0.9.6 LegacyBoot (keeping the OC 0.9.7 binaries). Edited December 19, 2023 by deeveedee Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814693 Share on other sites More sharing options...
droples Posted December 19, 2023 Share Posted December 19, 2023 1 hour ago, deeveedee said: @droples That makes sense. Maybe we need to enable FixupAppleEfiImages quirk? EDIT: I enabled Booter > FixupAppleEfiImages quirk and attempted to use the OC 0.9.7 LegacyBoot utility, but it did not work for me. There must be another step necessary for use of the new LegacyBoot utility. After my failed test, I reverted to the OC 0.9.6 LegacyBoot (keeping the OC 0.9.7 binaries). OpenCore0.9.8(commitfc9a5ec Try this one.... BOOT_Legacy(OC0.9.7-Commit-11a33b4).zip 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814697 Share on other sites More sharing options...
deeveedee Posted December 19, 2023 Share Posted December 19, 2023 @droples I'm sure it works since it is essentially the same as the 0.9.6 version. I continue to think that I'm missing a required change and haven't yet pinned the blame on an OC bug. When I get time, I'll review again later. Thanks for the assist! 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814698 Share on other sites More sharing options...
deeveedee Posted December 28, 2023 Share Posted December 28, 2023 Looks like the OC Devs have the fix for HfsPlusLegacy.efi not loading in OC 0.9.7. I have not tested yet. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814932 Share on other sites More sharing options...
droples Posted December 29, 2023 Share Posted December 29, 2023 12 hours ago, deeveedee said: Looks like the OC Devs have the fix for HfsPlusLegacy.efi not loading in OC 0.9.7. I have not tested yet. 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814947 Share on other sites More sharing options...
STLVNUB Posted December 30, 2023 Share Posted December 30, 2023 Anybody With A 100% Working EFI For Sonoma Please Send It To Me Thanks Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814966 Share on other sites More sharing options...
STLVNUB Posted December 30, 2023 Share Posted December 30, 2023 6 hours ago, eSaF said: Hi Bro - I don't fully understand what you're looking for or how mine will help but here is mine from my MSI Z490 (As in Signature). Everything fully working as in a real Mac with Sonoma Beta 3, within Beta 3 limitations, minus personal Data, hope it helps. EFI.zip 24.48 MB · 2 downloads Thanks, Got It All Sorted, Had Secure Boot Enabled In Bios 😄 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814990 Share on other sites More sharing options...
Slice Posted December 30, 2023 Share Posted December 30, 2023 Don't mix UEFI Secure Boot that you enabled in BIOS and Apple Secure Boot that your bios never hear. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814992 Share on other sites More sharing options...
STLVNUB Posted December 30, 2023 Share Posted December 30, 2023 3 hours ago, Slice said: Don't mix UEFI Secure Boot that you enabled in BIOS and Apple Secure Boot that your bios never hear. Bios Reset Itself, Secure Boot Enabled By Default Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814997 Share on other sites More sharing options...
SavageAUS Posted December 31, 2023 Share Posted December 31, 2023 Hi. Did you upgrade your Ryzen 5 3600 to Ventura or Sonoma and if yes, could you please share your config.plist as it will be too much effort for me to prepare from scratch Negative. I replaced that cpu with a ryzen 9 5900x which is updated to Sonoma. Sent from my iPhone using Tapatalk Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2814999 Share on other sites More sharing options...
Slice Posted December 31, 2023 Share Posted December 31, 2023 9 hours ago, STLVNUB said: Bios Reset Itself, Secure Boot Enabled By Default You didn't hear me. UEFI secure boot which you can set in BIOS is not same as SecureBootMode in opencore. There are two different things having same letters "secure boot". 4 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815005 Share on other sites More sharing options...
ea dd Posted January 5, 2024 Share Posted January 5, 2024 (edited) New Years Greetings to all. I have a problem with opencore and High Siearra. My system is old and currently it runs High Sierra through clover very well except hdmi audo. Recently i tried to boot it with opencore and succeeded but, after login, few seconds later, it just freezes. no responce, no pinging from same lan. seems like all process halt. no error, no kernel panic, no message, etc... I have uploaded archived file which includes opencore efi folder and boot log message. why try opencore if clover works is hdmi audio works with opencore. i can check it just before freezing. Mainboard: Gigabyte GA-EP45-UD3R rev 1.1 BIOS firmware: F12 (which is latest) CPU: Intel Core 2 Quad Q9550 Video: Asus GTX 650 1GB Audio: ALC889a (onboard) Network: RTL8161 (onboard) Disk: Samsung Evo 860 250GB RAM: Gskill 4GB DDR2-1100 i have followed Dortana guide and used latest opencore/driver/kexts. Help me to realise why it freezes. Thanks. EDIT: Staying at login screen also freezes as well Archive.zip Edited January 5, 2024 by ea dd Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815215 Share on other sites More sharing options...
deeveedee Posted January 5, 2024 Share Posted January 5, 2024 (edited) 14 hours ago, ea dd said: New Years Greetings to all. I have a problem with opencore and High Siearra. My system is old and currently it runs High Sierra through clover very well except hdmi audo. Recently i tried to boot it with opencore and succeeded but, after login, few seconds later, it just freezes. no responce, no pinging from same lan. seems like all process halt. no error, no kernel panic, no message, etc... This could be caused by multiple issues and is not necessarily caused by Open Core. When you switched from CLOVER to Open Core, did you also switch from FakeSMC to VirtualSMC? EDIT: Also, I don't think that HDMI audio should work better with Open Core than with CLOVER. When you switched from CLOVER to Open Core, did you also switch from VoodooHDA to AppleALC? Edited January 5, 2024 by deeveedee 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815242 Share on other sites More sharing options...
ea dd Posted January 6, 2024 Share Posted January 6, 2024 15 hours ago, deeveedee said: This could be caused by multiple issues and is not necessarily caused by Open Core. When you switched from CLOVER to Open Core, did you also switch from FakeSMC to VirtualSMC? EDIT: Also, I don't think that HDMI audio should work better with Open Core than with CLOVER. When you switched from CLOVER to Open Core, did you also switch from VoodooHDA to AppleALC? Yes. FakeSMC to VirtualSMC. Have not used voodooHDA. it was AppleALC. so maybe i should use FakeSMC instead VirtualSMC. then inform here with results. thanks. 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815257 Share on other sites More sharing options...
STLVNUB Posted January 13, 2024 Share Posted January 13, 2024 (edited) Opencore BUG I Have A Nvme Drive That Was Named VenturaHighway And Renamed It To Sonoma, Picker Still Sees It As VenturaHighway Edited January 13, 2024 by STLVNUB Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815508 Share on other sites More sharing options...
Stefanalmare Posted January 13, 2024 Share Posted January 13, 2024 10 minutes ago, STLVNUB said: Opencore BUG I Have A SSD That Was Named VenturaHighway And Renamed It To Sonoma, Picker Still Sees It As VenturaHighway Until the next update. 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815509 Share on other sites More sharing options...
STLVNUB Posted January 13, 2024 Share Posted January 13, 2024 On 12/31/2023 at 6:04 PM, Slice said: You didn't hear me. UEFI secure boot which you can set in BIOS is not same as SecureBootMode in opencore. There are two different things having same letters "secure boot". WasTalking About Bios 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815510 Share on other sites More sharing options...
miliuco Posted January 13, 2024 Share Posted January 13, 2024 (edited) @STLVNUB Installing or reinstalling Intel Power Gadget fixes it by a workaround: it updates Preboot volume and OpenCore gets the new name. It’s an easy way. Edited January 13, 2024 by miliuco 3 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815511 Share on other sites More sharing options...
STLVNUB Posted January 13, 2024 Share Posted January 13, 2024 (edited) 4 hours ago, miliuco said: @STLVNUB Installing or reinstalling Intel Power Gadget fixes it by a workaround: it updates Preboot volume. It’s an easy way. Point Me In The Right Direction Please, Still OC Should NOT Do It Installing An App To FIX A Bug Is Not The Way To Go... Fixed It With Disk Utility, One Of The Volumes Still Had Old Name Edited January 14, 2024 by STLVNUB 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815512 Share on other sites More sharing options...
pkdesign Posted January 24, 2024 Share Posted January 24, 2024 So is OC not on an every month update basis anymore. I guess the software has matured enough not to need it? 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815849 Share on other sites More sharing options...
miliuco Posted January 24, 2024 Share Posted January 24, 2024 3 hours ago, pkdesign said: So is OC not on an every month update basis anymore. I guess the software has matured enough not to need it? Maybe developers team has not too much members and they are busy with other things. It is also not necessary to have a new version monthly. But we always want to try something new 🙂 2 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815851 Share on other sites More sharing options...
Anto65 Posted January 24, 2024 Share Posted January 24, 2024 https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/debug.html#file-swaps 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815853 Share on other sites More sharing options...
deeveedee Posted January 28, 2024 Share Posted January 28, 2024 On 1/24/2024 at 12:35 PM, pkdesign said: So is OC not on an every month update basis anymore. I guess the software has matured enough not to need it? I'm sure the OC Devs (and the CLOVER Devs) are very happy to have the break from another monthly OC update. 1 1 Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815964 Share on other sites More sharing options...
cankiulascmnfye Posted January 28, 2024 Share Posted January 28, 2024 On 1/24/2024 at 6:35 PM, pkdesign said: So is OC not on an every month update basis anymore. I guess the software has matured enough not to need it? There have been updates posted constantly since the 0.9.7 Release: https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true It's just that the "Releases" section hasn't been updated. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815967 Share on other sites More sharing options...
deeveedee Posted January 28, 2024 Share Posted January 28, 2024 15 minutes ago, cankiulascmnfye said: There have been updates posted constantly since the 0.9.7 Release: https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true It's just that the "Releases" section hasn't been updated. There are OC commits between releases? This is the first I'm hearing about this. Thank you. Link to comment https://www.insanelymac.com/forum/topic/350754-opencore-general-discussion/page/338/#findComment-2815968 Share on other sites More sharing options...
Recommended Posts