pkdesign Posted August 28, 2020 Share Posted August 28, 2020 On 8/26/2020 at 11:14 PM, chris1111 said: You can try and use an Automate folder for icnspack I made its working perfectly good create this set of Icon at the good size and use the name bellow (verry important) ⬇︎ Selector.png Selected.png ExtHardDrive.png AppleRecv.png ExtAppleRecv.png HardDrive.png AppleTM.png Windows.png Tool.png Shell.png NOTE Selector.png must be 80x80 in 144 pixels Selected.png must be 288x288 in 144 pixels All the others must be 256x256 in 144 pixels --------------------------------- Do not worry about resizing and creating the final icon because the script will take care of it You can read the script it is readable with any text editor. Your only have to copy and paste your set of Icon in the folder Icon then double clic to icnspack-Build.command In the video I create a themes in 3 seconds NOTE: Folder Resource is removed with each use, and empty the Icon folder before starting over. hope you like it Folder attach ⬇︎ icnspack-Builder.zip OMG! This is Fan-tastic!!! Not only do I not have to make two sets of pngs (1x and 2x), this takes the whole folder of PNGs and boom! It's done! Genius. It is only missing the "Apple" icon option. 2 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735733 Share on other sites More sharing options...
chris1111 Posted August 28, 2020 Share Posted August 28, 2020 7 minutes ago, pkdesign said: OMG! This is Fan-tastic!!! Not only do I not have to make two sets of pngs (1x and 2x), this takes the whole folder of PNGs and boom! It's done! Genius. It is only missing the "Apple" icon option. Thanks yea working like a charm Apple Option ? 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735736 Share on other sites More sharing options...
billgates Posted August 29, 2020 Share Posted August 29, 2020 Hello, I've been trying to figure out how to use custom system icons for a few days and don't understand the instructions in the OpenCore document or here. Can someone just please clarify it a bit. So, I have Ubuntu booting just fine with OpenCore. I took the "ubuntu" icon and renamed it to ".VolumeIcons.icns" and put it in a usb drive then booted into Ubuntu and used "sudo mv" command to move it to "/" of my Ubuntu partition. That didn't work. I also placed the ".VolumeIcons.icns" icon in the "Ubuntu" folder of my EFI. That didn't work either. Thank you. Apple.icns and Windows.icns are applied just fine. PickerAttributes = 1 PickerMode = External Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735809 Share on other sites More sharing options...
blackosx Posted August 29, 2020 Author Share Posted August 29, 2020 (edited) I have not tried setting custom icons for any Linux distro so cannot give 100% advice but what you've tried sounds correct, though is clearly not working for you. Could maybe using Custom Entries help? https://github.com/acidanthera/bugtracker/issues/1042 Have you tried using DBG version of OpenCore and OrenCanopy to see if there's anything in the log? Edited August 29, 2020 by blackosx Added DBG OpenCanopy 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735823 Share on other sites More sharing options...
billgates Posted August 29, 2020 Share Posted August 29, 2020 (edited) 1 hour ago, blackosx said: Could maybe using Custom Entries help? https://github.com/acidanthera/bugtracker/issues/1042 OMG, thank you very much. What answered my question was the pull request made by the user that opened the issue in the link. He wrote: For entry with Path = .../\EFI\path\to\bootloader.efi it should try to load .../\EFI\path\to\bootloader.efi.icns So, basically what I did was place the icon in the OS folder in the EFI (in my case ubuntu and android) and renamed them to the same name as the bootloader with it's extension plus ".icns" and the end. i.e. grubx64.efi.icns. And boom everything worked. Thanks for pointing me in that direction. ps. Love your icons. Please consider adding some Android ones in the future if it's not too much trouble. Edited August 29, 2020 by billgates 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735827 Share on other sites More sharing options...
blackosx Posted August 30, 2020 Author Share Posted August 30, 2020 Great news! Thanks for the report. When you ask for Android icons would you be thinking Android-x86, RemixOS and PhoenixOS? Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735840 Share on other sites More sharing options...
billgates Posted August 30, 2020 Share Posted August 30, 2020 (edited) I am using Android-x64 but I just meant the generic Android logo, that would cover all of them. Edited August 30, 2020 by billgates Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735843 Share on other sites More sharing options...
blackosx Posted August 30, 2020 Author Share Posted August 30, 2020 Thanks for confirming. Sure, I’ll add that to my list for the next round of updates. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735844 Share on other sites More sharing options...
pkdesign Posted August 30, 2020 Share Posted August 30, 2020 On 8/28/2020 at 7:00 PM, chris1111 said: Thanks yea working like a charm Apple Option ? Yes, one just for Apple.icns. You have one for "Windows," but not just "Apple" Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735892 Share on other sites More sharing options...
chris1111 Posted August 30, 2020 Share Posted August 30, 2020 58 minutes ago, pkdesign said: Yes, one just for Apple.icns. You have one for "Windows," but not just "Apple" Apple is HardDrive.png 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735893 Share on other sites More sharing options...
bisdak4920 Posted August 31, 2020 Share Posted August 31, 2020 Big Sur look Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735924 Share on other sites More sharing options...
pkdesign Posted August 31, 2020 Share Posted August 31, 2020 18 hours ago, chris1111 said: Apple is HardDrive.png If you have icns labeled Apple.icns then any Macintosh drive will show that icon. If it is labeled HardDrive.icns then any unknown (such as an EFI drive, Linux, etc) will use the HardDrive.icns. Check blackosx drive sets and you can see Apple.icns options. Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735987 Share on other sites More sharing options...
chris1111 Posted August 31, 2020 Share Posted August 31, 2020 1 minute ago, pkdesign said: If you have icns labeled Apple.icns then any Macintosh drive will show that icon. If it is labeled HardDrive.icns then any unknown (such as an EFI drive, Linux, etc) will use the HardDrive.icns. Check blackosx drive sets and you can see Apple.icns options. You only have rename HardDrive.png in the script Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735989 Share on other sites More sharing options...
pkdesign Posted August 31, 2020 Share Posted August 31, 2020 Well there is an idea. I'll try my hand at editing the script! Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735990 Share on other sites More sharing options...
chris1111 Posted August 31, 2020 Share Posted August 31, 2020 11 minutes ago, pkdesign said: Well there is an idea. I'll try my hand at editing the script! Here take a look if is correct I rename Apple.png / Apple1.png / Apple.icns icnspack-Build.command.zip Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735992 Share on other sites More sharing options...
Andrey1970 Posted August 31, 2020 Share Posted August 31, 2020 Apple.icns for macOS HardDrive.icns for all, if no other icons. (This icon shall be present surely. It is used for everything that isn't defined specially.) 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2735994 Share on other sites More sharing options...
pkdesign Posted August 31, 2020 Share Posted August 31, 2020 3 hours ago, chris1111 said: Here take a look if is correct I rename Apple.png / Apple1.png / Apple.icns icnspack-Build.command.zip This one still didn’t make all of them. I edited and this works! icnspack-Build.command Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736015 Share on other sites More sharing options...
chris1111 Posted August 31, 2020 Share Posted August 31, 2020 15 minutes ago, pkdesign said: This one still didn’t make all of them. I edited and this works! icnspack-Build.command Ha ok you add HardDrive Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736017 Share on other sites More sharing options...
pkdesign Posted August 31, 2020 Share Posted August 31, 2020 Well, after many weeks of trying to perfect this process, I have created a second and third set of icons for OpenCanopy I call CircleBlobIcon and CircleBlobText. I take a very different approach to icons. You can find them here: https://github.com/pkdesign/OpenCanopyIcons Many, many thanks to @chris1111 for his incredible batch script! Spoiler 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736020 Share on other sites More sharing options...
chris1111 Posted August 31, 2020 Share Posted August 31, 2020 1 hour ago, pkdesign said: Well, after many weeks of trying to perfect this process, I have created a second and third set of icons for OpenCanopy I call CircleBlobIcon and CircleBlobText. I take a very different approach to icons. You can find them here: https://github.com/pkdesign/OpenCanopyIcons Many, many thanks to @chris1111 for his incredible batch script! Reveal hidden contents Beautyfull set of icons verry clean themes 1 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736029 Share on other sites More sharing options...
luky35 Posted September 1, 2020 Share Posted September 1, 2020 Copied icons from CircleBlobIcon to the EFI OC Resources - Image folder, but did not show the icon menu at startup. Why? Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736034 Share on other sites More sharing options...
billgates Posted September 1, 2020 Share Posted September 1, 2020 2 hours ago, luky35 said: Copied icons from CircleBlobIcon to the EFI OC Resources - Image folder, but did not show the icon menu at startup. Why? Do you have OpenCanopy and selected external picker in your config.plist? Also make sure that the new icons you added are named exactly as the ones they are replacing. 1 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736053 Share on other sites More sharing options...
luky35 Posted September 1, 2020 Share Posted September 1, 2020 1 hour ago, billgates said: Do you have OpenCanopy and selected external picker in your config.plist? Also make sure that the new icons you added are named exactly as the ones they are replacing. I don't think the icons are compatible, so the start menu doesn't work. Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736069 Share on other sites More sharing options...
pkdesign Posted September 1, 2020 Share Posted September 1, 2020 (edited) 10 hours ago, luky35 said: I don't think the icons are compatible, so the start menu doesn't work. I use these icons everyday. See screen shot a few posts back. I'd be sure to check for what @billgates said. They are all named exactly what they need to be named. Not sure what you mean by "start menu" doesn’t work. Edited September 1, 2020 by pkdesign Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736130 Share on other sites More sharing options...
billgates Posted September 1, 2020 Share Posted September 1, 2020 (edited) 13 hours ago, luky35 said: I don't think the icons are compatible, so the start menu doesn't work. You didn't answer on whether you have installed and setup OpenCanopy or not. There are a few steps that need to be taken beyond the initial OpenCore setup in order to get the GUI and custom icons to work. Anyway if you haven't already setup OpenCanopy here is the link to the instructions: https://dortania.github.io/OpenCore-Post-Install/cosmetic/gui.html ps. I couldn't get this to work on OC 5.9 but it worked right away on 6.0 so make sure you are up to date. Edited September 1, 2020 by billgates 2 Link to comment https://www.insanelymac.com/forum/topic/344251-opencanopy-icons/page/3/#findComment-2736138 Share on other sites More sharing options...
Recommended Posts