[Pre-Release] macOS Catalina 10.15.1

[jinbingmao]

5 minutes ago, CMMChris said:

Navi驱动程序（X6000）最终包含在第二个beta版本中。

0x73101002 0x73121002 0x73181002 0x73191002 0x731A1002 0x731B1002 0x731F1002

[pinarek]

yes German Friend @CMMChris  download is running :-)

Edited October 17, 2019 by pinarek

[Hackintosh Tech]

Navi Works, its confirmed

[MorenoAv]

Updated... all is well...

[Pavo]

They removed support for both Series 7 and Series 8 SATA controllers. So make sure if you have those SATA controllers you disabled them in the BIOS before trying to boot.

[Allan]

13 minutes ago, Pavo said:

They removed support for both Series 7 and Series 8 SATA controllers. So make sure if you have those SATA controllers you disabled them in the BIOS before trying to boot.

So, I'll keep using Mojave for a long time...

 

Bad news for my Ivy Bridge 

[Pavo]

Just now, Allan said:

So, I'll keep using Mojave for a long time...

 

Bad news for my Ivy Bridge 

Yeah, thank god I only had 1 HDD that was using SATA controller, rest are PCIe NVMe Drives.

[vandroiy2012]

22 minutes ago, Pavo said:

They removed support for both Series 7 and Series 8 SATA controllers. So make sure if you have those SATA controllers you disabled them in the BIOS before trying to boot.

 

Series 7 SATA works as before

 

 

 

[Pavo]

4 minutes ago, vandroiy2012 said:

 

Series 7 SATA works as before

 

 

 

You mind sharing how you are getting this to work?

[vandroiy2012]

9 minutes ago, Pavo said:

You mind sharing how you are getting this to work?

 

Simple update from 10.15.1 b1 to 10.15.1 b2

 

It's @Andrey1970 laptop. You can ask him for details or reports. 

Edited October 17, 2019 by vandroiy2012

[CMMChris]

Anyone getting a black screen on AMD cards: Whatevergreen currently is not compatible with the Beta 2.

[vandroiy2012]

2 minutes ago, CMMChris said:

Anyone getting a black screen on AMD cards: Whatevergreen currently is not compatible with the Beta 2.

 

Try agdpmod=pikera bootarg. It should help.

[Andrey1970]

 

20 minutes ago, Pavo said:

You mind sharing how you are getting this to work?

 

It is native works.

[Pavo]

10 minutes ago, Andrey1970 said:

 

 

It is native works.

Well I guess I am wrong fro assuming that my Asus z9pe-d8 ws which has C602 chipset uses a Intel 7 Series SATA Controller. I am currently trying to use this SSDT.

DefinitionBlock ("", "SSDT", 2, "Pavo", "_SATA", 0x00000000)
{
    External (_SB_.PCI0.SAT0, DeviceObj)

    Scope (_SB.PCI0.SAT0)
    {
        Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
        {
            Return (Package (0x04)
            {
                "device-id", 
                Buffer (0x04)
                {
                     0x02, 0xE1, 0x00, 0x00                           // ....
                }, 

                "compatible", 
                Buffer (0x0D)
                {
                    "pci8086,1e02"
                }
            })
        }
    }
}

Which is a correct device-id for Intel 7 Series Controller. Any suggestions?

[iCanaro]

vega 56 nano --> boot-arg -wegoff no blackscreen  

 

 

[Andrey1970]

19 minutes ago, Pavo said:

Well I guess I am wrong fro assuming that my Asus z9pe-d8 ws which has C602 chipset uses a Intel 7 Series SATA Controller. I am currently trying to use this SSDT.

DefinitionBlock ("", "SSDT", 2, "Pavo", "_SATA", 0x00000000)
{
    External (_SB_.PCI0.SAT0, DeviceObj)

    Scope (_SB.PCI0.SAT0)
    {
        Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
        {
            Return (Package (0x04)
            {
                "device-id", 
                Buffer (0x04)
                {
                     0x02, 0xE1, 0x00, 0x00                           // ....
                }, 

                "compatible", 
                Buffer (0x0D)
                {
                    "pci8086,1e02"
                }
            })
        }
    }
}

Which is a correct device-id for Intel 7 Series Controller. Any suggestions?

 

 

You have a misprint.

0x02, 0x1E, 0x00, 0x00

[Pavo]

15 minutes ago, Andrey1970 said:

 

 

You have a misprint.

0x02, 0x1E, 0x00, 0x00

Damn I did, testing now.

[Pavo]

1 hour ago, Andrey1970 said:

 

 

You have a misprint.

0x02, 0x1E, 0x00, 0x00

Well that didn't work, still getting kernel panic on AppleAHCIPort.kext and the bootargs keepsyms=1 debug=0x100 is not allowing it to stop to take a screenshot.

[crazybirdy]

8 minutes ago, Pavo said:

Well that didn't work, still getting kernel panic on AppleAHCIPort.kext and the bootargs keepsyms=1 debug=0x100 is not allowing it to stop to take a screenshot.

Use it to stop to take a screenshot.

 

Remove panic log first.

Clover Find code    = 008a0284 c07447
Clover Replace code = 008a0284 c0EB47

[Pavo]

2 minutes ago, crazybirdy said:

Use it to stop to take a screenshot.

 

Remove panic log first.

Clover Find code    = 008a0284 c07447
Clover Replace code = 008a0284 c0EB47

Not using Clover, using OpenCore and those are the bootargs I am using. 

[jsl2000]

2 hours ago, vandroiy2012 said:

 

Try agdpmod=pikera bootarg. It should help.

This boot-arg worked for my Ryzen 1700X hackintosh with AMD 7950 GPU. Either removal of WEG or -wegoff did not work for me.

Big thanks for your advice.

Edited October 18, 2019 by jsl2000

[crazybirdy]

5 minutes ago, Pavo said:

Not using Clover, using OpenCore and those are the bootargs I am using. 

 

OpenCore seems already have removed the panic log.

[Pavo]

Weird I am not seeing any changes from release to beta 2 for AppleAHCIPort.kext though.

[user01100]

6 hours ago, Moviemakergr said:

Anyone with navi GPU ?

Seems to work... agdpmod=pikera - else boots to black screen...

[Gigamaxx]

6 hours ago, vandroiy2012 said:

 

Try agdpmod=pikera bootarg. It should help.

 

Navi is not in the 10000contrlerkext or the others.  They have a new 6000Framebufferkext.    It’s set up like a IGPU?