ctguru Posted March 22 Share Posted March 22 23 hours ago, D3v1L said: try this EFI put your SMBIOS detail (SN/SMUUID/ROM/MLB) reboot, reset nvram, start maybe use a pendrive...risk-free EFI.zip 4.8 MB · 2 downloads removed wifi, sata card, still no USB I'm going to have a close look at ACPI files on my Clover install an see what's happening Link to comment Share on other sites More sharing options...
D3v1L Posted March 22 Share Posted March 22 At this time, i think ur USB controller is not mapped correctly...i can give u a USB map kext for test...but i don't know ur case's USB...so, i can only try to see if usb work on motherboard side... Wifi is another thing....need extra kext and oclp (if you have broadcom base..like BCM94360xx) Think ur SATA card is simply and asmedia controller...strange u don't see it... Link to comment Share on other sites More sharing options...
D3v1L Posted March 22 Share Posted March 22 try this, replace yours...maybe some ports in ur case's won't work USBMap.kext.zip 1 Link to comment Share on other sites More sharing options...
ctguru Posted March 22 Share Posted March 22 4 hours ago, D3v1L said: try this, replace yours...maybe some ports in ur case's won't work USBMap.kext.zip 2.24 kB · 0 downloads I pulled out wifi and sata card to eliminate them. It's funny that USB devices work like keyboard and mouse, but not usb drives. I'll play with my mapping and also se if yours makes a difference. Again, thanx for your help and input Link to comment Share on other sites More sharing options...
ctguru Posted April 6 Share Posted April 6 ok at least now my USB ports are mapped correctly still external usb drives are not mounting in finder or showing in Disk Utility (Sonoma & Ventura), but showing in IOREG, Hacktool etc. Pulled all my USB headers out. going to play again with SYMBIOS and see if that makes a difference, but it may come down to the Catalina NVME running Clover that is messing with stuff somehow going to change my Ventura to a Monterey install as soon as I can work out why the USB installer isn't seeing ANY drives on my hack Link to comment Share on other sites More sharing options...
saCULar Posted April 8 Share Posted April 8 On 3/5/2024 at 6:28 PM, miliuco said: @Blesh Are you using IOSkywalkFamily 1.1.0 and OCLP beta 1.4.0? https://github.com/dortania/OpenCore-Legacy-Patcher/tree/main/payloads/Kexts/Wifi https://github.com/dortania/OpenCore-Legacy-Patcher/actions/runs/7979420107 (Artifacts >> OpenCore-Patcher.app (GUI)) This advice solved my 14.4 wifi and slow boot issues. Thanks Miliuco regards saCULar 1 Link to comment Share on other sites More sharing options...
ctguru Posted April 24 Share Posted April 24 So, I thought stuff it. Popped a new NVME drive in, now everything works fine. The old NVME drive with CLover, must have been interferring with O[penCore somehow, even thoug it wasn't used to boot. Link to comment Share on other sites More sharing options...
ctguru Posted May 2 Share Posted May 2 Update, the majority of stuff is working fine. I bought some 10gb usb hubs to increase my USB port numbers. Getting a pop-up unrecognised disk message on start-up and I think it's related to my windows disk. I just eject it and there doesn't seem to be any issues. Also apple mail app is requiring me to sign in to google every time I want to check my email, I've changed some settings to see if it helps I've removed the thunderbolt card and going to use it in a Windows only build, esata card is working and I'm on ethenet so not really worrying about the wifi card at the moment 1 Link to comment Share on other sites More sharing options...
pkdesign Posted May 10 Share Posted May 10 Updated to OC v1! No issue so far, simple upgrade. 1 Link to comment Share on other sites More sharing options...
Slice Posted May 11 Share Posted May 11 9 hours ago, pkdesign said: Updated to OC v1! No issue so far, simple upgrade. Because there is no changes for systems newer than 10.6. 1 Link to comment Share on other sites More sharing options...
dredhorse Posted May 14 Share Posted May 14 Hi, I could use some help again. I already tried updating the EFI to latest OC but booting macOS Ventura 13.4 hangs in that case. Would like to upgrade to lates macOS. I have attached a cleaned EFI which is working well atm. I gutted it down a bit, if I did gut it down to much let me know, i can also post a dropbox link. Perhaps somebody could take a look. Thanks a lot in advance Don 2024-05-14 EFI - Snowwhite Prep.zip Link to comment Share on other sites More sharing options...
eSaF Posted May 14 Share Posted May 14 (edited) 1 hour ago, dredhorse said: Thanks a lot in advance Hi - I have taken a look at your EFI Folder and found all within including OC version needs updating (see included pics). I don't know if this is the cause of the problem you're having but I have Updated all for you within the attached revised EFI Folder for you to try. Good luck. 2024-05-14 EFI - Snowwhite Prep.zip Edited May 14 by eSaF include EFI Folder 2 Link to comment Share on other sites More sharing options...
rob1980 Posted May 20 Share Posted May 20 (edited) Hey guys, I’ve got a strange issue which seems to happen on Ventura but not on Sonoma, I’m not able to stay on Sonoma as it gives me all sorts of issues with music software, whether that’s due to OCLP or not I don’t know - but I may have to bite the bullet and go back if I can't resolve this. Anyway…. On Sonoma - no issues. 1. On ventura - most times when starting up I have no Bluetooth or usb at the login screen, works fine at the boot picker page but nothing once the OS starts. I have to hold the power button to restart, then it all appears to work on booting up? 2. I have no wifi at all since downgrading from Sonoma and restoring a time machine backup - this might be due to patches applied for OCLP that I need to revert? Wifi adaptor is seen but just fails to connect to my wifi, I've got it set to DHCP but tried manual IP too, nothing has been changed on my network. My EFI folder hasn't changed, everything is up to date as far as Opencore, kexts etc. I formatted my SSD with Sonoma on, installed Ventura from a new USB installer and restored my applications and files from migration assistant. Any ideas? Edit, Fixed wifi (silly error on my part, hadn't disabled the Kexts for Sonoma wifi to work) EFI added, removed resource folder to keep under the 10MB allowed and removed serial etc. Edited May 20 by rob1980 Link to comment Share on other sites More sharing options...
unknownharris Posted May 23 Share Posted May 23 (edited) Hello guys, I'm on macOS Sonoma 14.0 and I have a strange problem where my computer seems to completely freeze out of the blue sometimes, even when I'm doing minimal tasks. If I press the button to shut it down the prompt appears but there is no way to select anything. Last time I updated my EFI was through OCAT last October and it only started appearing after then, but I never noticed cause I didn't use it as a daily driver like I do now. Anybody else have this issue and found a solution? Download the EFI here (18MB) Edited May 23 by unknownharris Added Google drive link for EFI.zip (18MB) Link to comment Share on other sites More sharing options...
MaLd0n Posted May 23 Share Posted May 23 21 minutes ago, unknownharris said: Hello guys Use this EFI folder and generate ur serials. Stay with MacPro7,1 smbios. EFI AudioGod Topic OC 1.0.1.zip Generate USB kext with USB Tool Box. https://github.com/USBToolBox/tool/releases/tag/0.1.1 Link to comment Share on other sites More sharing options...
unknownharris Posted May 23 Share Posted May 23 4 minutes ago, MaLd0n said: Use this EFI folder and generate ur serials. Stay with MacPro7,1 smbios. EFI AudioGod Topic OC 1.0.1.zip Generate USB kext with USB Tool Box. https://github.com/USBToolBox/tool/releases/tag/0.1.1 I generated the USB kext by selecting Discover Ports, Select ALL and then Build UTBMap.kext (don't know if that is the correct way) I just put it on the Kexts folder and replace my current EFI folder with this one? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 23 Share Posted May 23 1 minute ago, unknownharris said: I generated the USB kext by selecting Discover Ports, Select ALL and then Build UTBMap.kext (don't know if that is the correct way) KEYS Order -Press D key -Press B key -Press S key -Press A key -Press K key Use UTBMap with USBToolBox USBToolBox.kext.zip Remove USBInjectAll and XHCI-unsupported 1 Link to comment Share on other sites More sharing options...
unknownharris Posted May 23 Share Posted May 23 1 hour ago, MaLd0n said: KEYS Order -Press D key -Press B key -Press S key -Press A key -Press K key Use UTBMap with USBToolBox USBToolBox.kext.zip Remove USBInjectAll and XHCI-unsupported Alright, I wanna try see if it will boot from the USB to test this new EFI and not break my configuration. I formatted my USB drive to FAT-32 with GUID, mounted its EFI partition and copied the EFI folder inside. But when I try to boot from it (USB drive) on startup it doesn't even show up, what's wrong? Link to comment Share on other sites More sharing options...
MaLd0n Posted May 23 Share Posted May 23 Just follow procedure -Delete old EFI folder and paste new. Don't use merge files -Don't use Drag and Drop into EFI partition. Use Copy/Paste instead -Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen Use one USB stick macOS bootable or direct on SSD EFI partition Bios/UEFI options just disable CSM and secure boot if need. Set ur XMP. Link to comment Share on other sites More sharing options...
unknownharris Posted May 23 Share Posted May 23 (edited) On 5/24/2024 at 1:27 AM, MaLd0n said: Just follow procedure -Delete old EFI folder and paste new. Don't use merge files -Don't use Drag and Drop into EFI partition. Use Copy/Paste instead -Reset NVRAM one time - with OpenCore use entry "Reset Nvram" / with Clover use F11 key on boot screen Use one USB stick macOS bootable or direct on SSD EFI partition Bios/UEFI options just disable CSM and secure boot if need. Set ur XMP. Unfortunately your EFI didn't work for me. I replaced my old one in my SSD with yours, changed my serials, reset NVRam and now I get verbose printouts when booting, Configuring MDM services... on every boot and the Bluetooth and Wifi drivers no longer work. Your finished EFI with my configuration is attached if you wanna check what I tried. I don't know what went so wrong. (serials etc replaced with 00000) EFI.zip Edit: I made it work by updating the kexts with OCAT and the USB configuration is even better than before! Thanks @MaLd0n ! Edited May 26 by unknownharris Link to comment Share on other sites More sharing options...
benjiolino Posted May 25 Share Posted May 25 On 5/14/2024 at 12:53 PM, eSaF said: Hi - I have taken a look at your EFI Folder and found all within including OC version needs updating (see included pics). I don't know if this is the cause of the problem you're having but I have Updated all for you within the attached revised EFI Folder for you to try. Good luck. 2024-05-14 EFI - Snowwhite Prep.zip 4.78 MB · 3 downloads where did you get the 1.0.1 version of OCAT? I can only find the version for OCAT 0.95 from December 2023. Link to comment Share on other sites More sharing options...
Anto65 Posted May 25 Share Posted May 25 Download OC 1.0.1 from here https://dortania.github.io/builds/?product=OpenCorePkg&viewall=true&version=1.0.1&sha=7af12eca7814565a66a2fc9bb260c817f0952e65 Import then to OCAT https://drive.google.com/file/d/1pdSfFr6zN-vpQ-WhPoERUWqZ3tuTu1Cq/view?usp=drive_link 2 Link to comment Share on other sites More sharing options...
eSaF Posted May 25 Share Posted May 25 (edited) 3 hours ago, benjiolino said: where did you get the 1.0.1 version of OCAT? I can only find the version for OCAT 0.95 from December 2023. Hi - If I understand your query correctly, you can find the OCAT app here - https://github.com/ic005k/OCAuxiliaryTools If you're asking about OC 1.0.1 version, follow @Anto65 post above. Edited May 25 by eSaF Link to comment Share on other sites More sharing options...
unknownharris Posted May 26 Share Posted May 26 (edited) Hello everyone, I set up a triple boot between Windows, macOS and Linux and unfortunately my Linux installation comes up on boot as Nobara-0.39-Linux-latest-whatever instead of a simple Linux label. How would I go about to change its boot label? Edited May 26 by unknownharris Link to comment Share on other sites More sharing options...
ctguru Posted May 26 Share Posted May 26 Anyone had any issues updating to Sonoma 14.5 from 14.4.1? Link to comment Share on other sites More sharing options...
Recommended Posts