MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 25 minutes ago, AudioGod said: Just use mine from my EFI folder, it’s made for the z390 pro and pro WiFi IT Worked yeahhhhhhhhhh DO anyone know where can i find someone to solve hardware aceleration issues? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726827 Share on other sites More sharing options...
texem Posted June 25, 2020 Share Posted June 25, 2020 until you do not provide your hardware details (gfx card) it's a lottery Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726848 Share on other sites More sharing options...
MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 21 minutes ago, texem said: until you do not provide your hardware details (gfx card) it's a lottery Noobie errors sorry. Z390 Aorus Pro wifi 8700K 16Gb ram Gtx 1060 6Gb Bios 12c with cfg lock disabled I do not care about wifi or bluetooth bios settings are exactly like on this guide do you need more photos of about this mac or something??? excuse my ignorance but everyone start from somewhere have a nice day people Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726859 Share on other sites More sharing options...
MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 18 minutes ago, eSaF said: If this is your EFI tree lay-out, lilu.kext is out of position, it should be first in the array before any other kext. Have a look at the official OC Guide for clarity. Good luck. Sorry I should have mentioned if your EFI is Opencore. This layout is on Opencore 059 debug config.plist listed the first place. have a look i did the command line from dortania guide to see if its working properly Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726870 Share on other sites More sharing options...
texem Posted June 25, 2020 Share Posted June 25, 2020 there is no hardware accel with GTX1060 on Catalina Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726871 Share on other sites More sharing options...
MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 (edited) 8 minutes ago, texem said: there is no hardware accel with GTX1060 on Catalina Im on High Sierra 10,13,6 When i get a 5700x i will be going to catalina Edited June 25, 2020 by MrPaulfpv Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726872 Share on other sites More sharing options...
texem Posted June 25, 2020 Share Posted June 25, 2020 (edited) ahh .. interesting to see our latest OC is still working with HighSierra but unfortunately we optimized our EFI's for Catalina and AG and me no longer provide HighSierra support here, very sorry. But there might be another guy here who is able to support you with NVidia Edited June 25, 2020 by texem Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726881 Share on other sites More sharing options...
MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 (edited) 16 minutes ago, texem said: ahh .. interesting to see our latest OC is still working with HighSierra but unfortunately we optimized our EFI's for Catalina and AG and me no longer provide HighSierra support here, very sorry. But there might be another guy here who is able to support you with NVidia Yeah its working now, im not getting frezzes at all, and i now can workwell on final cut and premiere. Who is this guy you are tolking about? can i DM him or something? Wait a second, ITS working Yeahhhhhhhhhhhhhhhhhhhhh Edited June 25, 2020 by MrPaulfpv Prove of hardware aceleration Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726883 Share on other sites More sharing options...
WizeMan Posted June 25, 2020 Share Posted June 25, 2020 10 minutes ago, MrPaulfpv said: Yeah its working now, im not getting frezzes at all, and i now can workwell on final cut and premiere. Who is this guy you are tolking about? can i DM him or something? Wait a second, ITS working Yeahhhhhhhhhhhhhhhhhhhhh Are you asking who this guy is? AG? AG? Our dear beloved AudioGod of course... @AudioGod 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726887 Share on other sites More sharing options...
MrPaulfpv Posted June 25, 2020 Share Posted June 25, 2020 1 minute ago, WizeMan said: Are you asking who this guy is? AG? AG? Our dear beloved AudioGod of course... @AudioGod @AudioGod Sorry for the missconception im new in this page, First thing i was asking for help for a patched ssdt-plug but i got yours, turns out it worked, my power management became funtional at this stage, the only thing i can say its not working is an optimiced ssdt-plug for high sierra 10,13,6, as i have a z390 aorus pro wifi / 8700k / gtx 1060 6gb and i cannot go to mojave or catalina until i purchase a new grafics card 5700xt im on the way, but money its money. So the thing is im i ok with this ssdt?? or may i need a new one?? cuda / opencl / metal are showing on premiere cc 2019, vdachecker shows error Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726892 Share on other sites More sharing options...
velopitex Posted June 25, 2020 Share Posted June 25, 2020 With AG OpenCore 0.5.9 EFI who using APFS in their SSD's (Samsung 860 EVO and/or WDC) are you using TRIM enabled commands or APFS no need them anymore? I'm try to find this info but have no luck, all says different things about it. Now I do not have any 'TRIM support' enabled on all my SSD's and I do not know... do i need it or not. Help me to understand this guys, please. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2726933 Share on other sites More sharing options...
Filmluver Posted June 29, 2020 Share Posted June 29, 2020 Just want to thank AudioGod and everyone else that's helped with the latest OpenCore EFI. I made the switch from Clover a couple of weeks ago and it was easy peasy. Running on OpenCore is super stable, clean and feels 100% like a real mac. Wow. 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2727851 Share on other sites More sharing options...
geekiegeek Posted June 29, 2020 Share Posted June 29, 2020 (edited) I'm keen to move my rig over to OpenCore but don't really know where to start. Is there a guide similar to Glasgoods that shows how to implement an OpenCore system end to end? I have seen mention of doing a conversion but would a clean install make for a better system in the long run? Edited June 30, 2020 by geekiegeek Added an additional question Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2727920 Share on other sites More sharing options...
dsynos80 Posted June 30, 2020 Share Posted June 30, 2020 A clean installation is always the best choice. I cannot say about migrating to OC because i havent tried it yet, but what i can say is that i have the same installation since Yosemite and even kept it when moving to this motherboard from the X58 platform in High Sierra so i never lost my audio presets and settings and reinstall all this stuff again. Just keep a Clone as backup and a working Clover boot stick handy and try it. Audiogod's and the rest of the team's magic made this possible and saved at least a week of reinstalling from the beginning. 2 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2727956 Share on other sites More sharing options...
WizeMan Posted June 30, 2020 Share Posted June 30, 2020 (edited) 7 hours ago, geekiegeek said: I'm keen to move my rig over to OpenCore but don't really know where to start. Is there a guide similar to Glasgoods that shows how to implement an OpenCore system end to end? I have seen mention of doing a conversion but would a clean install make for a better system in the long run? In terms of A to Z, this is the OpenCore bible: https://dortania.github.io/OpenCore-Desktop-Guide/ Edited June 30, 2020 by WizeMan 2 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2727958 Share on other sites More sharing options...
jmcm Posted June 30, 2020 Share Posted June 30, 2020 On 5/25/2020 at 1:10 AM, Essentiial said: Thank you AudioGod, I'm going to take your advice and try the OpenCore EFI first. *fingers crossed* Hi @Essentiial, did it worked? I need to build a mini-itx hackintosh and I really want to create one that works with AudioGod EFI, because it just works great. Thanks 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2727965 Share on other sites More sharing options...
neramirez Posted July 9, 2020 Share Posted July 9, 2020 (edited) Hi friends, Looking for advice on an issue I'm experiencing with my setup: Sometimes after a random time, my keyboard changes from QWERTY to œ∑´®†¥¨ˆøπ“‘åß∂ƒ©˙∆˚¬…æΩ≈ç√∫˜µ≤≥ In other words, seems to me like the data sent from the keyboard get corrupted, after that, all characters are different than the key I'm typing, this is happening in different USB ports, I did many testing trying to figure out if is one port or another with no luck apparently is happening with all of them. I have two main differences on the hardware of this thread, I have the WIFI version of the MB and a thunderbolt card. As my setup is a bit different I created a USBMap that I'm attaching if anyone of you wants to take a look Can some of you give me any pointers on this thing? Thanks! USBMap.kext.zip Edited July 9, 2020 by neramirez Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729456 Share on other sites More sharing options...
Tiem Posted July 9, 2020 Share Posted July 9, 2020 (edited) 3 hours ago, neramirez said: Can some of you give me any pointers on this thing? Thanks! USBMap.kext.zip Your mapping is wrong. H10 is not USB3, but Internal (255). You lack SS entries. Additionally, you're missing some port current limit settings, notably: kUSBSleepPortCurrentLimit kUSBSleepPowerSupply kUSBWakePortCurrentLimit kUSBWakePowerSupply Each are siblings of iMac19,1-XHC. Here is the correct map: HS01 – Unused HS02 – Unused SS01 – USB-C (case) SS02 – USB-C (case) HS/SS03 – USB3 HS/SS04 – USB3 HS/SS05 – USB3 HS/SS06 – USB-C (with switch) HS/SS07 – USB3 HS/SS08 – USB3 HS/SS09 – USB3 (case) HS/SS10 – USB3 (case) HS11 – Internal USB 2.0 Header (WiFi/BT card) HS12 – Unused HS13 – 4xUSB2.0 WiFi is irrelevant. You can disable in BIOS but macOS will ignore regardless. FWIW, the WiFi module sits on HS14, so it does not interfere with anything. The EFI from the regular Pro will work without issue. For a visual view, go here: https://github.com/ultratiem/aorus-z390-pro (DO NOT USE THIS EFI IT'S OUTDATED). Lastly, I strongly suggest using Hackintool to create your map. Edited July 9, 2020 by Tiem typo Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729483 Share on other sites More sharing options...
pkdesign Posted July 9, 2020 Share Posted July 9, 2020 If I am not mistake, the Clover EFI provided does not need any USBMap kext. Only the OpenCore one. It is coded into the DSDT for our board. And the one provided works perfectly. Why are you trying to map? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729520 Share on other sites More sharing options...
Tiem Posted July 9, 2020 Share Posted July 9, 2020 9 hours ago, neramirez said: Sometimes after a random time, my keyboard changes from QWERTY to œ∑´®†¥¨ˆøπ“‘åß∂ƒ©˙∆˚¬…æΩ≈ç√∫˜µ≤≥ ^^^^ my guess would be because of the above 1 hour ago, pkdesign said: If I am not mistake, the Clover EFI provided does not need any USBMap kext. Only the OpenCore one. It is coded into the DSDT for our board. And the one provided works perfectly. Why are you trying to map? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729526 Share on other sites More sharing options...
neramirez Posted July 10, 2020 Share Posted July 10, 2020 Thanks, @Tiem I created a new mapping with the hacking tool and I don't have any issues so far, I'll post an update in the next days 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729644 Share on other sites More sharing options...
pkdesign Posted July 10, 2020 Share Posted July 10, 2020 I've got a question for @AudioGod and the other smart people here. Every couple of boots my computer panics and throws the prohibited symbol. I just reboot and it works just fine. I have reset NVRAM a couple of times but I still get this behavior. I just updated to OcQuirks 23 in hopes that it might fix it but it is still happening. Any ideas of what to do? I know I will have to dive into the logs. Any guidance as to what I am looking for? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729733 Share on other sites More sharing options...
mariodj Posted July 11, 2020 Share Posted July 11, 2020 any tips why osx start laging ?? i got latest efi from my god and it was ok untill now Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2729739 Share on other sites More sharing options...
Filmluver Posted July 13, 2020 Share Posted July 13, 2020 On 7/10/2020 at 7:36 PM, pkdesign said: I've got a question for @AudioGod and the other smart people here. Every couple of boots my computer panics and throws the prohibited symbol. I just reboot and it works just fine. I have reset NVRAM a couple of times but I still get this behavior. I just updated to OcQuirks 23 in hopes that it might fix it but it is still happening. Any ideas of what to do? I know I will have to dive into the logs. Any guidance as to what I am looking for? I had that occasional issue too until I switched to AudioGod's OpenCore EFI. Give it a try, it's super stable for me. Runs and feels like a real Mac. Love it!!! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2730105 Share on other sites More sharing options...
jimborae Posted July 13, 2020 Share Posted July 13, 2020 On 7/11/2020 at 12:36 AM, pkdesign said: I've got a question for @AudioGod and the other smart people here. Every couple of boots my computer panics and throws the prohibited symbol. I just reboot and it works just fine. I have reset NVRAM a couple of times but I still get this behavior. I just updated to OcQuirks 23 in hopes that it might fix it but it is still happening. Any ideas of what to do? I know I will have to dive into the logs. Any guidance as to what I am looking for? 5 hours ago, Filmluver said: I had that occasional issue too until I switched to AudioGod's OpenCore EFI. Give it a try, it's super stable for me. Runs and feels like a real Mac. Love it!!! I also have this occassional issue............on AG's EFI. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/137/#findComment-2730125 Share on other sites More sharing options...
Recommended Posts