AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

[hansik]

Just now, AudioGod said:

You have to make sure the board is abiding by the cpus rated TDP and power limits by disabling Enhanced multi core performance 

 Enhanced multi core performance = it is in bios right ?

Its means I have to disable OC and enhanced multi core and its should work ?

[AudioGod]

12 minutes ago, hansik said:

 Enhanced multi core performance = it is in bios right ?

Its means I have to disable OC and enhanced multi core and its should work ?

yes in the bios
 

If you mean by Oc your own personal overclock then yes return all your overclock setting to default (auto)

[hansik]

all right. ty

[hansik]

Do you know if Mojave works with the current EFI polaris and a RX580 ?

Edited May 22, 2020 by hansik

[AudioGod]

27 minutes ago, hansik said:

Do you know if Mojave works with the actual EFI polaris and a RX580 ?

Clover does yes 100%

OpenCore isn’t meant to the way I have it setup but saying that people are using it with Mojave and claim it’s fine.

[hansik]

I use clover. Ty for information.

[Tiem]

3 hours ago, AudioGod said:

As for your claims on 19,1...you sure do talk a lot of nonsense sometimes. if you don't know how to fix it or have no hard facts don't just claim its 19,1 use 1,1 instead (the lazy or defeatist answer) as your find there's always a fix. I run 19,1 for the sake of this thread and its perfect.

 

 

Green artifacts on image previews (see above)

Artifacts encoding video in QT (see back in thread)

 

I don't care to die on this hill.

[AudioGod]

1 hour ago, Tiem said:

 

Green artifacts on image previews (see above)

Artifacts encoding video in QT (see back in thread)

 

I don't care to die on this hill.

I told him the fix for that, see above!

Your die there alone with the pigeons then where you belong,(with the pigeons that is) ...  puntang.  

 

And if you need Proof of no Green anything via a photo/video preview under 19,1

 

 

Edited May 22, 2020 by AudioGod

[pkdesign]

Hey all my AORUS Pro people, if you are using Clover, check out a theme that I designed that is now included in the Clover 5118 installer! Purple_Swirl. It is a all SVG theme.

[AudioGod]

9 minutes ago, pkdesign said:

Hey all my AORUS Pro people, if you are using Clover, check out a theme that I designed that is now included in the Clover 5118 installer! Purple_Swirl. It is a all SVG theme.

That’s awesome bro, I like it very much,

il make that the standard clover theme instead of neon from the next update. 
Very Good 

[wtw24]

On 5/20/2020 at 11:54 AM, ctguru said:

Ordered a PCI-e 4 port SATA card off eBay and it arrived yesterday.

 

https://www.ebay.com.au/itm/SATA3-0-4Port-6G-PCI-E-to-SATA3-0-Expansion-Card-SSD-HDD-Adapter-Controller-Card/114124787125?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

 

Couldn't get it to work showing all drives last night.  Today got home and applied this kext patch in the Clover config file and now works fine.

 

Find    --> 40600200
Replace --> 00000000
AppleAHCIPort

 

On another note I sometimes have an issue when booting, only occurs occasionally (maybe AppleAHCIPort might fix it :)).  Just recently converted to NVME boot drive and using AudioGods latestest EFI and config file using clover. Image attached, any ideas?  I'm assuming its something that needs to be tweaked in the boot arguments.

 

 

Boot from Install USB and repair permissions

 

To repair your permissions using the Disk Utility:

1. Choose Go > Utilities.
2. Double-click Disk Utility.
3. Select the volume in the left pane for which you want to repair permissions.
4. Click the First Aid tab.
5. Select the volume to which you want to install the Adobe application, and then click Repair Disk Permissions.

Edited May 23, 2020 by wtw24

[ceremy]

On 5/22/2020 at 7:37 PM, AudioGod said:

 

@ceremy Go into your plist and under DeviceProperties/PciRoot(0x0)/Pci(0x2,0x0) change AAPL,ig-platform-id value to 0300923E restart and try again. 

unfortunately the problem continues

[ctguru]

 
Boot from Install USB and repair permissions   To repair your permissions using the Disk Utility:

1. Choose Go > Utilities.
2. Double-click Disk Utility.
3. Select the volume in the left pane for which you want to repair permissions.
4. Click the First Aid tab.
5. Select the volume to which you want to install the Adobe application, and then click Repair Disk Permissions.

Cheers


Sent from my iPhone using Tapatalk

 
Boot from Install USB and repair permissions   To repair your permissions using the Disk Utility:

1. Choose Go > Utilities.
2. Double-click Disk Utility.
3. Select the volume in the left pane for which you want to repair permissions.
4. Click the First Aid tab.
5. Select the volume to which you want to install the Adobe application, and then click Repair Disk Permissions.

Cheers


Sent from my iPhone using Tapatalk

 
Boot from Install USB and repair permissions   To repair your permissions using the Disk Utility:

1. Choose Go > Utilities.
2. Double-click Disk Utility.
3. Select the volume in the left pane for which you want to repair permissions.
4. Click the First Aid tab.
5. Select the volume to which you want to install the Adobe application, and then click Repair Disk Permissions.

Cheers


Sent from my iPhone using Tapatalk

[akma]

On 5/20/2020 at 2:46 PM, AudioGod said:

You don’t need the plus 4 cpu power unless your extreme overclocking so I wouldn’t worry about that one buddy and I need more info on your WiFi card? Make and model?

tip, only use the bottom x8 or x1 pcie slot on the board for the WiFi or your get pcie lane problems 

 

thanks for your reply. So it is one of those hacks sold by https://www.osxwifi.com, bought back in 2018. I worked fine since then.

Broadcom BCM94360CD - 802.11 A/B/G/N/AC with Bluetooth 4.0, it comes installed in a Mini PCI-E to PCI-E x1 adapter.

So tried to connect it to the PCIEX1_3, but the behavior I get is that when I do that the mobo refuses to POST and I don't get even into the BIOS splash screen.

Would expect this from the wifi card that I have? Or if I try with the x8 pcie slot and get the same issue it is most likely that the card has an issue?
 

thanks!

[WizeMan]

7 hours ago, ceremy said:

unfortunately the problem continues

Have you changed any of the boot arguments especially “shikigva” ?

 

By the way, are you using @AudioGod’s EFI ?

[hansik]

Hello, the installation of Mojave works perfectly now.
I would like to be able to use intel UHD 630 at any time instead of gpu. What change should I make? Is there necessarily a complete change of the EFi, or can I make both solutions work? I saw that the glasgood build gives the possibility of using the UHD 630.
Currently when I try Vega connected or not, I can arrive in the middle of loading macos, and then nothing.

[Essentiial]

Hi guys, can you help me with the random restart issue with Catalina? 

Is it something I need to change in the EFI or in bios settings?

 

This is the EFI I used (thank you AudioGod!), everything works perfectly except for the random restarts.

 

Clover Z390 Pro Polaris 19,1 EFI 060420.zip

 

BIOS settings:

 

• Boot -> Windows 8/10 Features -> Win 8/10WHQL

• Boot -> CSM Support -> Disabled

• Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1

• Favourites -> VT-d -> Disabled 

• Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot

• Settings -> IO Ports -> Internal Graphics -> Enabled

• Settings -> IO Ports -> DVMT Pre-Allocated -> 64M

• Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M

• Settings -> IO Ports -> Aperture Size -> 256MB

• Settings -> IO Ports -> Audio Controller -> Enabled

• Settings -> IO Ports -> Above 4G Decoding -> Enabled

• Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto

• Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled

• Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled

• Settings -> Platform Power -> Platform Power Management -> Enabled

• Settings -> Platform Power -> ErP -> Enabled

• Settings -> Platform Power -> RC6(Render Standby) -> Enabled

 

Thank you in advance!!

[ceremy]

9 hours ago, WizeMan said:

Have you changed any of the boot arguments especially “shikigva” ?

 

By the way, are you using @AudioGod’s EFI ?

No i didnt change any boot arg.

yes im using @AudioGod 's Opencore EFI .

 

i resolved this issue When i used SMBios iMacPro1,1 (IGPU Disabled) .

i have new issue , i cant see nvram reset section on boot menu 

[AudioGod]

26 minutes ago, ceremy said:

No i didnt change any boot arg.

yes im using @AudioGod 's Opencore EFI .

 

i resolved this issue When i used SMBios iMacPro1,1 (IGPU Disabled) .

i have new issue , i cant see nvram reset section on boot menu 

Press Space to reveal it.

 

If you have a Polaris GPU you need to remove the shiki argument under 19,1 for it to work correctly But Smbios 1,1 will also serve you well.

 

37 minutes ago, Essentiial said:

Hi guys, can you help me with the random restart issue with Catalina? 

Is it something I need to change in the EFI or in bios settings?

 

This is the EFI I used (thank you AudioGod!), everything works perfectly except for the random restarts.

 

Clover Z390 Pro Polaris 19,1 EFI 060420.zip

 

BIOS settings:

 

• Boot -> Windows 8/10 Features -> Win 8/10WHQL

• Boot -> CSM Support -> Disabled

• Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1

• Favourites -> VT-d -> Disabled 

• Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot

• Settings -> IO Ports -> Internal Graphics -> Enabled

• Settings -> IO Ports -> DVMT Pre-Allocated -> 64M

• Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M

• Settings -> IO Ports -> Aperture Size -> 256MB

• Settings -> IO Ports -> Audio Controller -> Enabled

• Settings -> IO Ports -> Above 4G Decoding -> Enabled

• Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Auto

• Settings -> IO Ports -> USB Configuration ->  XHCI Hand-off -> Enabled

• Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled

• Settings -> Platform Power -> Platform Power Management -> Enabled

• Settings -> Platform Power -> ErP -> Enabled

• Settings -> Platform Power -> RC6(Render Standby) -> Enabled

 

Thank you in advance!!

What’s your system spec please in full?

Also please define a random restart in your instance?

Edited May 24, 2020 by AudioGod

[AudioGod]

5 hours ago, hansik said:

Hello, the installation of Mojave works perfectly now.
I would like to be able to use intel UHD 630 at any time instead of gpu. What change should I make? Is there necessarily a complete change of the EFi, or can I make both solutions work? I saw that the glasgood build gives the possibility of using the UHD 630.
Currently when I try Vega connected or not, I can arrive in the middle of loading macos, and then nothing.

If you want to use the igpu instead of the Radeon VII

you need to do the following to the config.plist:

1. Remove shikigva=80 bootarg

2. add igfxonln=1 bootarg (prevent HDMI issues after wake) and -wegnoegpu (Disable dedicated gpu)

 

Then remove the headless framebuffer and just add the right Framebuffer settings for the IGPU under Devices - Properties

 

For the i9900k with a UHD 630 its: plattform-id 3E9B0007 and device id 0x3E988086.

By the way it’s one or the other but not both unless the igpu is headless.

you can not use the igpu as a second gpu for output. 

Edited May 24, 2020 by AudioGod

[Essentiial]

29 minutes ago, AudioGod said:

What’s your system spec please in full?

Also please define a random restart in your instance?

 

Mini ITX

Motherboard: z390 I Aorus Pro Wifi

Graphic: AMD Radeon RX 570

CPU: i5-8400 LGA 1151

Memory: Crucial Ballistix Sport LT 3000 MHz DDR4 DRAM 16GB

 

It usually restarts every 10-15 minutes when I'm browsing the web, streaming videos, with Safari and Chrome. Also happens when I'm not using the internet. 

 

[AudioGod]

7 minutes ago, Essentiial said:

 

Mini ITX

Motherboard: z390 I Aorus Pro Wifi

Graphic: AMD Radeon RX 570

CPU: i5-8400 LGA 1151

Memory: Crucial Ballistix Sport LT 3000 MHz DDR4 DRAM 16GB

 

It usually restarts every 10-15 minutes when I'm browsing the web, streaming videos, with Safari and Chrome. Also happens when I'm not using the internet. 

 

If your using clover then my DSDTs are wrong for your motherboard, I do not support the ITX version of the Pro board as it’s not the same as the standard version and has a totally different PCB and power delivery.

However, My OpenCore EFI  might work with your setup as it doesn’t rely on a dsdt to function so why not give that a try instead. (Instructions on how to use it are on page one)

 

if you want to use clover then you will need to get a new dsdt created for your motherboard, If that is what you would prefer to do then you can make a request for a dsdt here.

https://www.olarila.com/forum/17-dsdt-patch-requests/

 

Edited May 24, 2020 by AudioGod

[hansik]

1 hour ago, AudioGod said:

If you want to use the igpu instead of the Radeon VII

1 hour ago, AudioGod said:

If you have a Polaris GPU you need to remove the shiki argument under 19,1 for it to work correctly But Smbios 1,1 will also serve you well.

 

I will use a sapphire rx 580 now not a r7. Is better to remove shiki arg on 19,1 ?

[AudioGod]

4 minutes ago, hansik said:

I will use a sapphire rx 580 now not a r7. Is better to remove shiki arg on 19,1 ?

Depends what your using it for but yes it can help the card with a lot of it’s strange behaviour.

 

[hansik]

Ok, for music application . Not for me for a buyer. I will see with him.

Edited May 24, 2020 by hansik