Jump to content

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

AudioGod

By AudioGod,
in Installation Guides

 Share
5539 posts in this topic

Recommended Posts

AudioGod
AudioGod
Posted
  • Author
Posted
1 minute ago, Cass67 said:

heh who knew ... can see from the gb site this is the case .. had no idea they did an itx version.


It’s a little dinky thing of a board.

E628EE57-0BF8-46D6-89D7-BCA528F03E3C.thumb.png.277a8c2c7f57d1bcf025d6dd15e92822.png
 

Bit cheeky calling it the pro though as it doesn’t even have the same VRMs, should really be called a gaming if you ask me.

MorenoAv
MorenoAv
Posted
Posted

My experience with the Asus is kinda complicated, because it only installs windows, but I will install macOS in it... you write my words :hysterical:...

AudioGod
AudioGod
Posted
  • Author
Posted (edited)
5 minutes ago, MorenoAv said:

My experience with the Asus is kinda complicated, because it only installs windows, but I will install macOS in it... you write my words :hysterical:...


ive installed macOS using the asus ITX board using clover just before Xmas actually. It was straight forward but I did it with a dsdt and some help from the Master MaLD0n. Using OpenCore would be even easier to do tbh.

Edited by AudioGod
MorenoAv
MorenoAv
Posted
Posted

I hope so, because I'll stay with OpenCore, it has a steep learning curve, but the end result is more like a real Mac in all things. Clover is more easy to grasp and the end result is not equal to the OpenCore.

 

AudioGod
AudioGod
Posted
  • Author
Posted (edited)
6 minutes ago, MorenoAv said:

I hope so, because I'll stay with OpenCore, it has a steep learning curve, but the end result is more like a real Mac in all things. Clover is more easy to grasp and the end result is not equal to the OpenCore.

 

Now you see no that is not true but I’m not going to get started on all of that.

Clover or OC are both very good and both have pros and cons. Clover has been around for many many years and will be here for many many more. OpenCore is in development and stil beta and until it’s release it will change with every version just like it has been so until it’s finished you just can’t compare. 
 

no AMD Vs Intel battles about Clover Vs Oc are allowed here, I’m not having it buddy and I use OC as my daily driver and I’m still not having it. :hysterical:

Edited by AudioGod
MorenoAv
MorenoAv
Posted
Posted

I don't both are tools that give us ends users an Mac experience with regular pc's, but we as end users after experiencing the end result can and sometimes end liking one more than the other, that is my case. I don't enter in the war one is better than the other... 

AudioGod
AudioGod
Posted
  • Author
Posted
1 minute ago, MorenoAv said:

I don't both are tools that give us ends users an Mac experience with regular pc's, but we as end users after experiencing the end result can and sometimes end liking one more than the other, that is my case. I don't enter in the war one is better than the other... 

you better not or your be in big trouble you hear? :hysterical: (I joke don’t worry...lol...this is not the Angry Thread) :hysterical:

WizeMan
WizeMan
Posted
Posted
7 hours ago, AudioGod said:


It’s a little dinky thing of a board.

E628EE57-0BF8-46D6-89D7-BCA528F03E3C.thumb.png.277a8c2c7f57d1bcf025d6dd15e92822.png
 

Bit cheeky calling it the pro though as it doesn’t even have the same VRMs, should really be called a gaming if you ask me.

 

I love this. <3 I'd just swap the WiFi+BT chip and marry this board.

  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted (edited)
9 hours ago, greedo said:

I have the same, aorus z390 i9 9900k without graphics card at the moment, only igpu. 

My EFIs are not designed to work with just the igpu only.
You need make a few changes for it to work like patching the igpu using hackintool for starters.

if your using OpenCore then follow the vanilla guide on how to do it.

Sorry I can not be any more help then that.

Edited by AudioGod
  • Like 1
laxattack
laxattack
Posted
Posted (edited)

Anyone have a clue why the computer would be restarting randomly, attached below is the error that popped up after it re-booted. (Just a heads up this is for OC)

  

panic(cpu 0 caller 0xffffff800e8c357e): "os_refcnt: overflow
(rc=0xffffff800eac29b8)\n"@/AppleInternal/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.101.6/libkern/os/refcnt.c:58
Backtrace (CPU 0), Frame : Return Address
0xffffff83bd2ab6b0 : 0xffffff800e1215cd
0xffffff83bd2ab700 : 0xffffff800e25a3c5
0xffffff83bd2ab740 : 0xffffff800e24bf7e
0xffffff83bd2ab790 : 0xffffff800e0c7a40
0xffffff83bd2ab7b0 : 0xffffff800e120c97
0xffffff83bd2ab8b0 : 0xffffff800e121087
0xffffff83bd2ab900 : 0xffffff800e8c2c7c
0xffffff83bd2ab970 : 0xffffff800e8c357e
0xffffff83bd2ab980 : 0xffffff800e243366
0xffffff83bd2ab9c0 : 0xffffff800e1502c7
0xffffff83bd2aba30 : 0xffffff800e671e6d
0xffffff83bd2aba90 : 0xffffff800e671d9e
0xffffff83bd2abae0 : 0xffffff800e671196
0xffffff83bd2abb50 : 0xffffff800e665baf
0xffffff83bd2abf40 : 0xffffff800e7875f7
0xffffff83bd2abfa0 : 0xffffff800e0c8206

BSD process name corresponding to current thread: powerd
Boot args: shikigva=80 alcid=7

Mac OS version:
19E287

Kernel version:
Darwin Kernel Version 19.4.0: Wed Mar  4 22:28:40 PST 2020;
root:xnu-6153.101.6~15/RELEASE_X86_64
Kernel UUID: AB0AA7EE-3D03-3C21-91AD-5719D79D7AF6
Kernel slide:     0x000000000de00000
Kernel text base: 0xffffff800e000000
__HIB  text base: 0xffffff800df00000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 14319154357799

 

Edited by laxattack
stavidawg
stavidawg
Posted
Posted

@AudioGod Apologies in advanced for the silly question, but was there any particular reason you added in AirportBrcmFixup.kext to your lastest Clover EFI folder? I noticed it wasn't in there before when looking at your last EFI folder I have loaded up currently. I figure its to help the users with non-plug and play wifi cards but wasn't sure if there was an alternative reason.

WizeMan
WizeMan
Posted
Posted
28 minutes ago, stavidawg said:

@AudioGod Apologies in advanced for the silly question, but was there any particular reason you added in AirportBrcmFixup.kext to your lastest Clover EFI folder? I noticed it wasn't in there before when looking at your last EFI folder I have loaded up currently. I figure its to help the users with non-plug and play wifi cards but wasn't sure if there was an alternative reason.

 

AirportBrcmFixup.kext helps resolve issues related to sleep, at least with the Fenvi T-919. OOB working doesn't mean 100% super native support, so AirportBrcmFixup.kext helps fill in gaps for things that don't work quite well.

  • Like 3
Cass67
Cass67
Posted
Posted
1 hour ago, laxattack said:

Anyone have a clue why the computer would be restarting randomly, attached below is the error that popped up after it re-booted. (Just a heads up this is for OC)

  


panic(cpu 0 caller 0xffffff800e8c357e): "os_refcnt: overflow
(rc=0xffffff800eac29b8)\n"@/AppleInternal/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.101.6/libkern/os/refcnt.c:58
Backtrace (CPU 0), Frame : Return Address
0xffffff83bd2ab6b0 : 0xffffff800e1215cd
0xffffff83bd2ab700 : 0xffffff800e25a3c5
0xffffff83bd2ab740 : 0xffffff800e24bf7e
0xffffff83bd2ab790 : 0xffffff800e0c7a40
0xffffff83bd2ab7b0 : 0xffffff800e120c97
0xffffff83bd2ab8b0 : 0xffffff800e121087
0xffffff83bd2ab900 : 0xffffff800e8c2c7c
0xffffff83bd2ab970 : 0xffffff800e8c357e
0xffffff83bd2ab980 : 0xffffff800e243366
0xffffff83bd2ab9c0 : 0xffffff800e1502c7
0xffffff83bd2aba30 : 0xffffff800e671e6d
0xffffff83bd2aba90 : 0xffffff800e671d9e
0xffffff83bd2abae0 : 0xffffff800e671196
0xffffff83bd2abb50 : 0xffffff800e665baf
0xffffff83bd2abf40 : 0xffffff800e7875f7
0xffffff83bd2abfa0 : 0xffffff800e0c8206

BSD process name corresponding to current thread: powerd
Boot args: shikigva=80 alcid=7

Mac OS version:
19E287

Kernel version:
Darwin Kernel Version 19.4.0: Wed Mar  4 22:28:40 PST 2020;
root:xnu-6153.101.6~15/RELEASE_X86_64
Kernel UUID: AB0AA7EE-3D03-3C21-91AD-5719D79D7AF6
Kernel slide:     0x000000000de00000
Kernel text base: 0xffffff800e000000
__HIB  text base: 0xffffff800df00000
System model name: iMacPro1,1 (Mac-7BA5B2D9E42DDD94)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 14319154357799

 

Looks related to power management (powerd) .. When you say random, what does this mean ?  using a specific app?  Using different apps?  Your doing nothing and the computer is idling then panic'ing?  going in or coming out of sleep?  

 

Do you have things like turn hard disks off after a period of time on?  

 

  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted (edited)
1 hour ago, stavidawg said:

@AudioGod Apologies in advanced for the silly question, but was there any particular reason you added in AirportBrcmFixup.kext to your lastest Clover EFI folder? I noticed it wasn't in there before when looking at your last EFI folder I have loaded up currently. I figure its to help the users with non-plug and play wifi cards but wasn't sure if there was an alternative reason.

@WizeMan summed it up nicely but for me it stops my Apple Watch unlock from breaking and also I get a lot less phantom network wakes from sleep. Not everybody will need or want to use the kext but I reckon for 90% of hacks out there it helps so it’s better to have it in the EFI then not at all.

By all means remove it if you feel you don’t need it. :thumbsup_anim:
 

By he way my combo card is as native as they come and still it’s a blatant improvement to use it then to not. 

Edited by AudioGod
  • Like 4
RoloCasquillo
RoloCasquillo
Posted
Posted

In AudioGod screenshot he has over 6000 in single core and over 38,000 in multi... I switched between 1.1 and 19.1 and I still stay between 1,000 and 1,300. 

 

Anyone has a suggestion on whats is going on? :( 

 

 

974010967_ScreenShot2020-04-14at1_20_49PM.thumb.png.620208c220b87da790fca9ad3c9aebfa.png

  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted
1 minute ago, RoloCasquillo said:

In AudioGod screenshot he has over 6000 in single core and over 38,000 in multi... I switched between 1.1 and 19.1 and I still stay between 1,000 and 1,300. 

 

Anyone has a suggestion on whats is going on? :( 

 

 

974010967_ScreenShot2020-04-14at1_20_49PM.thumb.png.620208c220b87da790fca9ad3c9aebfa.png


your scores are correct,

my screenshot is from the older geekbench 4 and your results are from geekbench 5. That’s in line with where you should be score wise. :thumbsup_anim:

  • Like 3
RoloCasquillo
RoloCasquillo
Posted
Posted (edited)
11 minutes ago, AudioGod said:


your scores are correct,

my screenshot is from the older geekbench 4 and your results are from geekbench 5. That’s in line with where you should be score wise. :thumbsup_anim:

 

You are the man! 

 

Thanks a lot for your work and all the other contributors. It was a simple guide, easy to understand with no problems at all. :thumbsup_anim: 

Edited by RoloCasquillo
  • Thanks 1
 Share
Go to topic listing
×
×
  • Create New...