AudioGod Posted March 11, 2020 Author Share Posted March 11, 2020 (edited) Good news people for all you Navi GPU users. 10.15.4 beta 5 corrects Navi freezing problems under certain smbios so from 10.15.4 release, smbios iMacpro1,1 is good to use again if you prefer it. Edited March 11, 2020 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2711965 Share on other sites More sharing options...
Neek Posted March 11, 2020 Share Posted March 11, 2020 2 hours ago, Cass67 said: I think if you have iGPU disabled or auto maybe this setting goes away. That's correct. The odd thing is that these settings will only appear once you enable the iGPU, save settings, reboot and enter BIOS setup again. Then they magically appear. 2 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2711967 Share on other sites More sharing options...
texem Posted March 11, 2020 Share Posted March 11, 2020 1 hour ago, AudioGod said: Good news people for all you Navi GPU users. 10.15.4 beta 5 corrects Navi freezing problems under certain smbios so from 10.15.4 release, smbios iMacpro1,1 is good to use again if you prefer it. really ?? that would be great !! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2711972 Share on other sites More sharing options...
AudioGod Posted March 11, 2020 Author Share Posted March 11, 2020 (edited) 7 minutes ago, texem said: really ?? that would be great !! Yeah it’s good again buddy, I have been testing since beta5 came out and even did a overnight test and my system is still standing. It’s still running now (sleeping while I’m at work) and hasn’t been restarted or shut it down since the update. Edited March 11, 2020 by AudioGod 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2711975 Share on other sites More sharing options...
dsynos80 Posted March 11, 2020 Share Posted March 11, 2020 (edited) 16 hours ago, Project 2501 said: I know this thread is mostly about getting your PCI devices listed in the profile, but I have a few questions about the Titan Ridge Card. I have an old MBP with a thunderbolt 2 port, so I need to get an adapter and TB2 cable to test it out with the card. Until then, it would be nice to get it setup correctly before I test it. What did you do to get it working? Is hot-plugging enabled with your setup? I did notice my card wasn't initially listed in the io registry explorer utility until I used a temporary installation of Win10 and installed the drivers. Then when I went back to the "mac side", it showed up under RP21? (can't remember off hand), but of course is doesn't show up under the PCI profile (purely cosmetic, I know). Just wanted to ask if there are any details you can relay to me like BIOS settings for the card. Thanks for any help you can provide. Hey man sry 4 the delay, i haven't tested hotplug but my Firewire Audio works with adaptors, here are my bios settings, Windows driver report and Hackintool stats. And yes its on RP21 for me too (bottom slot).Hope it will help you. Remember on Discrete Configuration menu to set GPiO Forece Power to ON. Edited March 11, 2020 by dsynos80 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2711979 Share on other sites More sharing options...
Project 2501 Posted March 11, 2020 Share Posted March 11, 2020 11 hours ago, texem said: did you flash your Titan Ridge ? No, but there doesn't seem to be any firmware update available on Gigabyte's support page, just a Win10 driver. Anyway, the card may be working for all I know. I just need some parts to come in so I can test it. 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712014 Share on other sites More sharing options...
texem Posted March 11, 2020 Share Posted March 11, 2020 1 hour ago, Project 2501 said: No, but there doesn't seem to be any firmware update available on Gigabyte's support page, just a Win10 driver. Anyway, the card may be working for all I know. I just need some parts to come in so I can test it. flash the card with the alternative firmware (see MacRumors f.i.) , you'll get full TB hotplug etc etc . I can confirm it's working absolutely smooth. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712017 Share on other sites More sharing options...
mariodj Posted March 11, 2020 Share Posted March 11, 2020 On 3/10/2020 at 9:24 PM, Tiem said: Beta 5 running just fine. What about Memory Modules Misconfigured info with SMBIOS Mac pro 7.1 ?? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712024 Share on other sites More sharing options...
AudioGod Posted March 11, 2020 Author Share Posted March 11, 2020 55 minutes ago, mariodj said: What about Memory Modules Misconfigured info with SMBIOS Mac pro 7.1 ?? We have that semi working. lists how much memory and what speed but isn't showing what slot its in yet. work in progress Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712026 Share on other sites More sharing options...
Tiem Posted March 11, 2020 Share Posted March 11, 2020 @mariodj what AG said. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712027 Share on other sites More sharing options...
mariodj Posted March 12, 2020 Share Posted March 12, 2020 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712045 Share on other sites More sharing options...
Project 2501 Posted March 12, 2020 Share Posted March 12, 2020 17 hours ago, dsynos80 said: Hey man sry 4 the delay, i haven't tested hotplug but my Firewire Audio works with adaptors, here are my bios settings, Windows driver report and Hackintool stats. And yes its on RP21 for me too (bottom slot).Hope it will help you. Remember on Discrete Configuration menu to set GPiO Forece Power to ON. No worries. I'm taking a long time to get things set up on my end... just working on it for an hour or so every few days. My current Hackintosh is working just fine, so there is no hurry. Thanks for the screenshots of your settings. It definitely will save me time troubleshooting. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712048 Share on other sites More sharing options...
Project 2501 Posted March 12, 2020 Share Posted March 12, 2020 G 11 hours ago, texem said: flash the card with the alternative firmware (see MacRumors f.i.) , you'll get full TB hotplug etc etc . I can confirm it's working absolutely smooth. I did a search and found the download from DSM2.Hackintosh of "TitanRidgeMacOSFirmware.bin.zip" along with the Open Core EFI for MacPro5.1. Correct? Anyway, I'm too chicken to flash my card right now. I think I'll try to get to work as is, then I'll consider flashing it if I really need the hot plugging. Thanks for the information. Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712050 Share on other sites More sharing options...
texem Posted March 12, 2020 Share Posted March 12, 2020 35 minutes ago, Project 2501 said: G I did a search and found the download from DSM2.Hackintosh of "TitanRidgeMacOSFirmware.bin.zip" along with the Open Core EFI for MacPro5.1. Correct? Anyway, I'm too chicken to flash my card right now. I think I'll try to get to work as is, then I'll consider flashing it if I really need the hot plugging. Thanks for the information. correct, it's worth giving it a try. You need only a SSDT modified for RP21 if seated in the lower x16 slot . Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712056 Share on other sites More sharing options...
Tiem Posted March 12, 2020 Share Posted March 12, 2020 2 hours ago, mariodj said: https://github.com/IOIIIO/MacProMemoryNotificationDisabler Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712058 Share on other sites More sharing options...
herodes Posted March 12, 2020 Share Posted March 12, 2020 On 8/21/2019 at 10:58 PM, AudioGod said: CFG Unlock (MSR) F12d BIOS Profile - The Easy Way Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU Hide contents @texem Has kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam. It also has all the bios settings listed on this guide pre done and saved onto the profile. F12d_UNLOCK.zip - Use with Bios Revision F12d ONLY 1 - Download the profile and save it to a USB Key 2 - Go into the bios, 3 - Load the profile, 4 - Save and exit 5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that. 6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked If you want to use Bios F11 instead then use this profile MSR Unlocked - Use with Bios Revision F11 ONLY PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. Hello everybody, I have the aorus-z390-pro WIFI (Bios 12c) mainboard and in the first time a different Bios Version to pro. (Bios 12d). How can I load the Bios profil or MSR Unlocked. I tried to load the profile, without success. Aorus-z390-pro WIFI BIOS 12c Aorus-z390-pro BIOS 12d How can I MSR-Unlock ! Thanks! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712062 Share on other sites More sharing options...
wdopulencia Posted March 12, 2020 Share Posted March 12, 2020 Hi! I followed the steps for the BIOS and I am now done with installing Catalina. However, I noticed that the fans for my graphics card is not spinning and I think maybe I am using the integrated graphics. How do I make my gpu work? Thank you! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712063 Share on other sites More sharing options...
herodes Posted March 12, 2020 Share Posted March 12, 2020 On 8/21/2019 at 10:58 PM, AudioGod said: @texem Has kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam. It also has all the bios settings listed on this guide pre done and saved onto the profile. F12d_UNLOCK.zip - Use with Bios Revision F12d ONLY 1 - Download the profile and save it to a USB Key 2 - Go into the bios, 3 - Load the profile, 4 - Save and exit 5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that. 6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked If you want to use Bios F11 instead then use this profile MSR Unlocked - Use with Bios Revision F11 ONLY PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. On 8/21/2019 at 10:58 PM, AudioGod said: CFG Unlock (MSR) F12d BIOS Profile - The Easy Way Highly recommended if your using a Vega 56/64, Radeon VII or Navi GPU Hide contents @texem Has kindly made this bios profile for you all to use that will unlock CFG on your motherboard making it play alot more friendly with the NVRam. It also has all the bios settings listed on this guide pre done and saved onto the profile. F12d_UNLOCK.zip - Use with Bios Revision F12d ONLY 1 - Download the profile and save it to a USB Key 2 - Go into the bios, 3 - Load the profile, 4 - Save and exit 5 - Go straight back into the bios and save your bios to a new profile and name it Default CFG Unlocked or something like that. 6 - Boot back into Catalina go into your clover config and under Kernal and Kext Patches Uncheck KernalPM 7 - Save the changes and then restart and your done, your motherboard will now be CFG (MSR) Unlocked If you want to use Bios F11 instead then use this profile MSR Unlocked - Use with Bios Revision F11 ONLY PLEASE NOTE - If you reset the bios or load bios defaults it will clear the Unlock making CFG Locked again. Hello everybody, I have the aorus-z390-pro WIFI (Bios 12c) mainboard and in the first time a different Bios Version to pro. (Bios 12d). How can I load the Bios profil or MSR Unlocked. I tried to load the profile, without success. Aorus-z390-pro WIFI BIOS 12c Aorus-z390-pro BIOS 12d How can I MSR-Unlock ! Thanks! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712064 Share on other sites More sharing options...
AudioGod Posted March 12, 2020 Author Share Posted March 12, 2020 3 minutes ago, herodes said: Hello everybody, I have the aorus-z390-pro WIFI (Bios 12c) mainboard and in the first time a different Bios Version to pro. (Bios 12d). How can I load the Bios profil or MSR Unlocked. I tried to load the profile, without success. Aorus-z390-pro WIFI BIOS 12c Aorus-z390-pro BIOS 12d How can I MSR-Unlock ! Thanks! Hi, what’s with the big writing? Hahahaha my bios profile is made for the non WiFi version of the board and won’t work on yours. You will need to unlock your MSR yourself I’m afraid but if that’s a bit much for you then just leave it locked. My EFIs. Will work both ways just check the notes is you want to use OC 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712066 Share on other sites More sharing options...
WizeMan Posted March 12, 2020 Share Posted March 12, 2020 8 minutes ago, wdopulencia said: Hi! I followed the steps for the BIOS and I am now done with installing Catalina. However, I noticed that the fans for my graphics card is not spinning and I think maybe I am using the integrated graphics. How do I make my gpu work? Thank you! The Graphics card will start spinning the fans only if it passes a certain threshold which I think is 60 Celcius 1 Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712067 Share on other sites More sharing options...
AudioGod Posted March 12, 2020 Author Share Posted March 12, 2020 8 minutes ago, wdopulencia said: Hi! I followed the steps for the BIOS and I am now done with installing Catalina. However, I noticed that the fans for my graphics card is not spinning and I think maybe I am using the integrated graphics. How do I make my gpu work? Thank you! That is correct bud, the fans use zero 0% when the gpu is not in use (just like in windows too) nothings wrong there but if you want to make sure then run Lexmark and check, should be all A ok Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712069 Share on other sites More sharing options...
mariodj Posted March 12, 2020 Share Posted March 12, 2020 1 hour ago, Tiem said: https://github.com/IOIIIO/MacProMemoryNotificationDisabler notification is gone now but i cannot see a memory tab in about now and when i press pci tab window about is quit Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712071 Share on other sites More sharing options...
herodes Posted March 12, 2020 Share Posted March 12, 2020 26 minutes ago, AudioGod said: Hi, what’s with the big writing? Hahahaha my bios profile is made for the non WiFi version of the board and won’t work on yours. You will need to unlock your MSR yourself I’m afraid but if that’s a bit much for you then just leave it locked. My EFIs. Will work both ways just check the notes is you want to use OC Hello is that the way I unlock my Mainboard ( MSR ) ? IOS SETTINGS (Bios Revision F12d) • Enter BIOS → Press F12 → Enter Setup • Save & Exit → Load Optimized Defaults • Boot -> Windows 8/10 Features -> Win 8/10WHQL • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first) • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1 • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice) • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot • Settings -> IO Ports -> Internal Graphics -> Enabled • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M • Settings -> IO Ports -> Aperture Size -> 256MB • Settings -> IO Ports -> Audio Controller -> Enabled • Settings -> IO Ports -> Above 4G Decoding -> Enabled • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled • Settings -> IO Ports -> USB Configuration -> XHCI Hand-off -> Enabled • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled • Settings -> Platform Power -> Platform Power Management -> Enabled • Settings -> Platform Power -> ErP -> Enabled • Settings -> Platform Power -> RC6(Render Standby) -> Enabled • Save & Exit → Save & Exit Setup Do I have to remove the battery? Thanks. The EFi worked perfect ! I used this EFI with Mojave can upgrade directly to Catalina? Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712073 Share on other sites More sharing options...
AudioGod Posted March 12, 2020 Author Share Posted March 12, 2020 (edited) 23 minutes ago, herodes said: Hello is that the way I unlock my Mainboard ( MSR ) ? IOS SETTINGS (Bios Revision F12d) • Enter BIOS → Press F12 → Enter Setup • Save & Exit → Load Optimized Defaults • Boot -> Windows 8/10 Features -> Win 8/10WHQL • Boot -> CSM Support -> Disabled (Can be set to Enabled if need be but try to have it set to Disabled first) • Favourites -> Extreme Memory Profile (X.M.P.) -> Profile1 • Favourites -> VT-d -> Disabled (Can be set to Enabled or Disabled, Your choice) • Settings -> IO Ports -> USB Configuration -> XHCI Hands-off -> Enabled • Settings -> IO Ports -> Internal Display Output -> PCIe 1 Slot • Settings -> IO Ports -> Internal Graphics -> Enabled • Settings -> IO Ports -> DVMT Pre-Allocated -> 64M • Settings -> IO Ports -> DVMT Total GFX0-Allocated -> 256M • Settings -> IO Ports -> Aperture Size -> 256MB • Settings -> IO Ports -> Audio Controller -> Enabled • Settings -> IO Ports -> Above 4G Decoding -> Enabled • Settings -> IO Ports -> USB Configuration -> Legacy USB Support -> Enabled • Settings -> IO Ports -> USB Configuration -> XHCI Hand-off -> Enabled • Settings -> Miscellaneous -> Software Guard Extensions (SGX) -> Disabled • Settings -> Platform Power -> Platform Power Management -> Enabled • Settings -> Platform Power -> ErP -> Enabled • Settings -> Platform Power -> RC6(Render Standby) -> Enabled • Save & Exit → Save & Exit Setup Do I have to remove the battery? Thanks. The EFi worked perfect ! I used this EFI with Mojave can upgrade directly to Catalina? They are the correct bios settings but won’t give you a unlocked MSR. Google search it on how as I’m not near my computer now to send you a link. you can upgrade to Catalina with no problems at all. @WizeMan do you have a link you could share on how to unlock for this guy please bro? Edited March 12, 2020 by AudioGod Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712076 Share on other sites More sharing options...
wdopulencia Posted March 12, 2020 Share Posted March 12, 2020 Hey! When I turned my pc on, it suddenly just boots to windows and bypassing clover i think? How do i fix this? Thanks! Link to comment https://www.insanelymac.com/forum/topic/339980-audiogods-aorus-z390-pro-patched-dsdt-mini-guide-and-discussion/page/80/#findComment-2712079 Share on other sites More sharing options...
Recommended Posts