Jump to content

AudioGod's Aorus Z390 Pro Patched DSDT Mini Guide and Discussion

AudioGod

By AudioGod,
in Installation Guides

 Share
5539 posts in this topic

Recommended Posts

AudioGod
AudioGod
Posted
  • Author
Posted
1 minute ago, hansik said:

Ok i just look your method on yt, its just a joke for some fapfap boy. I used Gelid pasta all time. always do this method; little more pasta and a good pressure do the rest. 
 

 

That Gelid paste is very thick but works well.

I only use thermal grizzly paste for myself. I swear by the stuff.

 

Cyberspacedweller
Cyberspacedweller
Posted
Posted (edited)

Hi guys, new here. Just joined after seeing this thread....

I have the exact hardware listed, iGPU only for now but in a couple of days I will have a Vega56 to add in. I'm having trouble installing MacOS at all however. Clover is not seeing the bootable volume for Catalina that I have created. I don't suppose anyone has a clue as to what I can try? I have used the recomended BIOS config settings and the EFI file for my current config. I would really like to get this up and running ASAP to do some work.

 

Thanks all.

Edited by Cyberspacedweller
kayler
kayler
Posted
Posted
11 hours ago, larabee said:

@kayler the EFI works fine on my end after I remove a few devices. I've been saturated all of my PCIE lanes and that causes some issues which need further investigation. Try using another Memory driver instead of OCquirks to see if it works for you. Each system config, even though having the same board, will have slight different memory alocation. 

If you have a lot of USB problem, I suggest you remove all of USB patches and add them in again. Open the config plist file and remove ALL usb port limit patches then add the following back to the file: 

 

Line 1: 

Name*: com.apple.iokit.IOUSBHostFamily
Find*: 83FB0F0F
Replace*: 83FB3F0F

 

Line 2

Name* com.apple.driver.usb.AppleUSBXHCI
Find*: 83F90F0F
Replace*: 83F93F0F

 

Then double check the DSDT patch to see if it's correct on yours. 

 

 

 


@larabee, at this moment, the memory errors only appears when i try to boot macos after booting windows, i need to had reset bios to solve it, i will try several memory fix.

 

And the usb, only works if i include usbinjectall, i will try editting the config.

 

After one week or more, if my system is stable, i will try to add wifi, bluetooth and 5700xt, because i need a stable system to work.

 

Many thanks 

AudioGod
AudioGod
Posted
  • Author
Posted (edited)
34 minutes ago, kayler said:


@larabee, at this moment, the memory errors only appears when i try to boot macos after booting windows, i need to had reset bios to solve it, i will try several memory fix.

 

And the usb, only works if i include usbinjectall, i will try editting the config.

 

After one week or more, if my system is stable, i will try to add wifi, bluetooth and 5700xt, because i need a stable system to work.

 

Many thanks 

The reason your getting boot failures is because the EFI isn’t running right on your system and usb is wrong so it’s having troubles buddy.
 

@kayler I’m going to experiment and make you a blind EFI and see if I can narrow down what’s going on for you. When you on here next let me know buddy and il get to work for you? :) 

Edited by AudioGod
kayler
kayler
Posted
Posted
9 hours ago, AudioGod said:

The reason your getting boot failures is because the EFI isn’t running right on your system and usb is wrong so it’s having troubles buddy.
 

@kayler I’m going to experiment and make you a blind EFI and see if I can narrow down what’s going on for you. When you on here next let me know buddy and il get to work for you? :) 

 

 

Thank you, I am here :)

MDavalos1993
MDavalos1993
Posted
Posted
On 2/29/2020 at 7:05 AM, AudioGod said:

 

Oh Dear, DRM is broken on a Rx 570.

This is a fault of Apples and is repaired in the next upcoming update (10.15.4)

also you need to update you bios to the latest revision for your board as F11 is incorrect for my dsdt.

also you are using the incorrect EFI folder, Use this one pal.

 

Z390 Pro Polaris Clover EFI 140220.zip

 

 

 

Yeap with that efi folder my hackintosh turn blocked... so I added a new argument to my boot "-shikioff"  with that argument the safari opened Netflix without blocking.. but now shows an error.. Im using chrome

Yeap my bios is F11 version.

 

Thanks again

Cipha
Cipha
Posted
Posted

I finally fixed my USB power problemes, that prevent devices to power up before booting to an OS. In BIOS when enabling fast boot there is an option for power management before boot. I enabled full power and now it's fianlly working. It seems like fast boot is not effecting Clover at this time. Are any risks keeping it enabled? 

kayler
kayler
Posted
Posted
15 hours ago, kayler said:

 

 

Thank you, I am here :)

 

Ohhh, panic with only IGPU :wallbash:

 

panic(cpu 0 caller 0xffffff80004652fa): Kernel trap at 0xffffff7f828acea7, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000015ad3000, CR4: 0x00000000003626e0
RAX: 0x000000000c000304, RBX: 0xffffff8083533600, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff83acd4bdf0, RBP: 0xffffff83acd4bdf0, RSI: 0x0000000000000000, RDI: 0xffffff8083536000
R8:  0x0000000000658e33, R9:  0x00000000000005c0, R10: 0x0000000000005bf0, R11: 0x0000000000005bf0
R12: 0xffffff8083533600, R13: 0x0000000000000002, R14: 0x0000000000000006, R15: 0xffffff7f82907538
RFL: 0x0000000000010246, RIP: 0xffffff7f828acea7, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff83acd4b850 : 0xffffff800033bb2b 
0xffffff83acd4b8a0 : 0xffffff80004734d5 
0xffffff83acd4b8e0 : 0xffffff8000464f4e 
0xffffff83acd4b930 : 0xffffff80002e2a40 
0xffffff83acd4b950 : 0xffffff800033b217 
0xffffff83acd4ba50 : 0xffffff800033b5fb 
0xffffff83acd4baa0 : 0xffffff8000ad2aa9 
0xffffff83acd4bb10 : 0xffffff80004652fa 
0xffffff83acd4bc90 : 0xffffff8000464ff8 
0xffffff83acd4bce0 : 0xffffff80002e2a40 
0xffffff83acd4bd00 : 0xffffff7f828acea7 
0xffffff83acd4bdf0 : 0xffffff7f828daafd 
0xffffff83acd4be20 : 0xffffff7f829e65d4 
0xffffff83acd4be50 : 0xffffff7f8288a9da 
0xffffff83acd4beb0 : 0xffffff7f828c2c1e 
0xffffff83acd4bee0 : 0xffffff8000a4109d 
0xffffff83acd4bf30 : 0xffffff8000a3f9e2 
0xffffff83acd4bf70 : 0xffffff8000a3ef6c 
0xffffff83acd4bfa0 : 0xffffff80002e213e 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f82889000->0xffffff7f8294cfff
            dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f81527000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f80d2f000
            dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f82858000
            dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f8185b000
            dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f8125c000
         com.apple.driver.AppleIntelKBLGraphics(14.0.4)[820679F0-1A2F-3F76-AEBD-24E3393CDFCD]@0xffffff7f82961000->0xffffff7f82a53fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f80d2f000
            dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f82858000
            dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f8185b000
            dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f82889000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 darkwake=0 -cdfon -v 

Mac OS version:
19D76

Kernel version:
Darwin Kernel Version 19.3.0: Thu Jan  9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64
Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE
__HIB  text base: 0xffffff8000100000
System model name: Macmini8,1 (Mac-7BA5B2DFE22DDD8C)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 3089764429334
last loaded kext at 2998846305907: >usb.cdc.ecm    5.0.0 (addr 0xffffff7f838c6000, size 49152)
last unloaded kext at 205936873545: >!AFileSystemDriver    3.0.1 (addr 0xffffff7f81252000, size 8192)
loaded kexts:


 

AudioGod
AudioGod
Posted
  • Author
Posted
2 hours ago, Cipha said:

I finally fixed my USB power problemes, that prevent devices to power up before booting to an OS. In BIOS when enabling fast boot there is an option for power management before boot. I enabled full power and now it's fianlly working. It seems like fast boot is not effecting Clover at this time. Are any risks keeping it enabled? 

Ah ok,

you shouldn’t use fast boot really for macOS or windows as it bypasses littles tests that most people think are important. Me personally think that’s not a good move but I can’t say the eff3cts in the long term if any.

kayler
kayler
Posted
Posted
2 hours ago, kayler said:

 

Ohhh, panic with only IGPU :wallbash:

 

panic(cpu 0 caller 0xffffff80004652fa): Kernel trap at 0xffffff7f828acea7, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000015ad3000, CR4: 0x00000000003626e0
RAX: 0x000000000c000304, RBX: 0xffffff8083533600, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff83acd4bdf0, RBP: 0xffffff83acd4bdf0, RSI: 0x0000000000000000, RDI: 0xffffff8083536000
R8:  0x0000000000658e33, R9:  0x00000000000005c0, R10: 0x0000000000005bf0, R11: 0x0000000000005bf0
R12: 0xffffff8083533600, R13: 0x0000000000000002, R14: 0x0000000000000006, R15: 0xffffff7f82907538
RFL: 0x0000000000010246, RIP: 0xffffff7f828acea7, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0, VF: 1

Backtrace (CPU 0), Frame : Return Address
0xffffff83acd4b850 : 0xffffff800033bb2b 
0xffffff83acd4b8a0 : 0xffffff80004734d5 
0xffffff83acd4b8e0 : 0xffffff8000464f4e 
0xffffff83acd4b930 : 0xffffff80002e2a40 
0xffffff83acd4b950 : 0xffffff800033b217 
0xffffff83acd4ba50 : 0xffffff800033b5fb 
0xffffff83acd4baa0 : 0xffffff8000ad2aa9 
0xffffff83acd4bb10 : 0xffffff80004652fa 
0xffffff83acd4bc90 : 0xffffff8000464ff8 
0xffffff83acd4bce0 : 0xffffff80002e2a40 
0xffffff83acd4bd00 : 0xffffff7f828acea7 
0xffffff83acd4bdf0 : 0xffffff7f828daafd 
0xffffff83acd4be20 : 0xffffff7f829e65d4 
0xffffff83acd4be50 : 0xffffff7f8288a9da 
0xffffff83acd4beb0 : 0xffffff7f828c2c1e 
0xffffff83acd4bee0 : 0xffffff8000a4109d 
0xffffff83acd4bf30 : 0xffffff8000a3f9e2 
0xffffff83acd4bf70 : 0xffffff8000a3ef6c 
0xffffff83acd4bfa0 : 0xffffff80002e213e 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f82889000->0xffffff7f8294cfff
            dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f81527000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f80d2f000
            dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f82858000
            dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f8185b000
            dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f8125c000
         com.apple.driver.AppleIntelKBLGraphics(14.0.4)[820679F0-1A2F-3F76-AEBD-24E3393CDFCD]@0xffffff7f82961000->0xffffff7f82a53fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f80d2f000
            dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f82858000
            dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f8185b000
            dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f82889000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 darkwake=0 -cdfon -v 

Mac OS version:
19D76

Kernel version:
Darwin Kernel Version 19.3.0: Thu Jan  9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64
Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE
__HIB  text base: 0xffffff8000100000
System model name: Macmini8,1 (Mac-7BA5B2DFE22DDD8C)
System shutdown begun: NO
Panic diags file available: YES (0x0)

System uptime in nanoseconds: 3089764429334
last loaded kext at 2998846305907: >usb.cdc.ecm    5.0.0 (addr 0xffffff7f838c6000, size 49152)
last unloaded kext at 205936873545: >!AFileSystemDriver    3.0.1 (addr 0xffffff7f81252000, size 8192)
loaded kexts:


 

 

 

It seems a problem with opengl, I have changed to metal and now it's stable

 

  • Like 1
AudioGod
AudioGod
Posted
  • Author
Posted

@kayler sorry I’ve not got back to you buddy, I’ve been super busy and I’m working now but I’m working from home today so when I’m next free I will come back and help you out properly.

do me a favour please and pm me your current EFI for me to examine when I’m free?

i Think I know what’s going on now with you and the EFI.

if you want I have a test for you that you can do yourself?

no infact scrap that just send me your EFI and il do it for you when I can. :)

sorry again I’ve not been more on it to help you out bud, il make it a priority for you. 

kayler
kayler
Posted
Posted
48 minutes ago, AudioGod said:

@kayler sorry I’ve not got back to you buddy, I’ve been super busy and I’m working now but I’m working from home today so when I’m next free I will come back and help you out properly.

do me a favour please and pm me your current EFI for me to examine when I’m free?

i Think I know what’s going on now with you and the EFI.

if you want I have a test for you that you can do yourself?

no infact scrap that just send me your EFI and il do it for you when I can. :)

sorry again I’ve not been more on it to help you out bud, il make it a priority for you. 

 

@AudioGod, don't worry and many thanks, I send you my EFI

 

Tiem
Tiem
Posted
Posted (edited)

So I'm stumped on this one no amount of google-fu.

 

There's a delay in emojis being placed into the message box. A long one. I've tested a real Mac and there is a slight one (.5s) but on my Hack it's a good 3-4s to go from emoji picker to message box. Is this the 5700 XT?

Edited by Tiem
  • Confused 1
dsynos80
dsynos80
Posted
Posted (edited)

Can someone check plz my Unpatched DSDT and SSDT's So i can have proper PCI Info and fan reading?

i Already Use yours 1.1 Audiogod  working good already but since h have the wifi version, i am getting "error getting pci info)

Tried doing it on my own but getting no results either on pci or on fan readings, i also post SSDT's 5 and 6

 

OSX:  Mojave 10.14.6 (18G3020)

Case: Cooler Master Storm Trooper

Mobo: Z390  Pro WiFi (Wifi Disabled)

Bios:   F11 (As per AudioGod instructions)

Cpu:  i7 8700k

Cooler: NZXT Kraken X62

Ram: Gskill Trident RGB 3000 (XMP Enabled)

GPU: Asus Strix Vega 64 (iGPU Disabled)

Hdd: 1-Adata XPG 8200 PRO NVME 250GB (Osx Boot Drive)

        2-Kingston Hyper X SSD 250GB (Windows)

        3-PNY SSD 960GB (Backup)

EXTRA PCI Cards:

                 1- Unibrain Fireboard Blue PCI-E (For my Firewire Audio Card) Works Great!

                 2- Gigabyte Titan Ridge (Bottom Slot, shows in hackintool)

 

Thank YOU!

 

 

Unpatched.zip

Edited by dsynos80
Edit
AudioGod
AudioGod
Posted
  • Author
Posted (edited)
4 hours ago, Tiem said:

So I'm stumped on this one no amount of google-fu.

 

There's a delay in emojis being placed into the message box. A long one. I've tested a real Mac and there is a slight one (.5s) but on my Hack it's a good 3-4s to go from emoji picker to message box. Is this the 5700 XT?


Hey Bud,

I just had a go on my hack as I’ve never heard of that one before and it’s totally normal for me, bare in mind though I’m using the Z390 Master so just get somebody on a pro board to double confirm for you.

 

1 hour ago, dsynos80 said:

Can someone check plz my Unpatched DSDT and SSDT's So i can have proper PCI Info and fan reading?

i Already Use yours 1.1 Audiogod  working good already but since h have the wifi version, i am getting "error getting pci info)

Tried doing it on my own but getting no results either on pci or on fan readings, i also post SSDT's 5 and 6

 

OSX:  Mojave 10.14.6 (18G3020)

Case: Cooler Master Storm Trooper

Mobo: Z390  Pro WiFi (Wifi Disabled)

Bios:   F11 (As per AudioGod instructions)

Cpu:  i7 8700k

Cooler: NZXT Kraken X62

Ram: Gskill Trident RGB 3000 (XMP Enabled)

GPU: Asus Strix Vega 64 (iGPU Disabled)

Hdd: 1-Adata XPG 8200 PRO NVME 250GB (Osx Boot Drive)

        2-Kingston Hyper X SSD 250GB (Windows)

        3-PNY SSD 960GB (Backup)

EXTRA PCI Cards:

                 1- Unibrain Fireboard Blue PCI-E (For my Firewire Audio Card) Works Great!

                 2- Gigabyte Titan Ridge (Bottom Slot, shows in hackintool)

 

Thank YOU!

 

 

Unpatched.zip


PCI info is purely cosmetic with zero effect on the system but if you ask MaLD0n you can get your own dsdt made up. The pro WiFi and pro board are identical in layout and pcie lanes used and even the pcb so I can’t see a benefit personally.

 

To Create Your Own Patched DSDT Message @MaLd0n using the link bellow

https://www.olarila.com/forum/17-dsdt-patch-requests/

(If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)

 

Edited by AudioGod
  • Thanks 1
texem
texem
Posted
Posted (edited)
5 hours ago, dsynos80 said:

Can someone check plz my Unpatched DSDT and SSDT's So i can have proper PCI Info and fan reading?

i Already Use yours 1.1 Audiogod  working good already but since h have the wifi version, i am getting "error getting pci info)

Tried doing it on my own but getting no results either on pci or on fan readings, i also post SSDT's 5 and 6

 

OSX:  Mojave 10.14.6 (18G3020)

Case: Cooler Master Storm Trooper

Mobo: Z390  Pro WiFi (Wifi Disabled)

Bios:   F11 (As per AudioGod instructions)

Cpu:  i7 8700k

Cooler: NZXT Kraken X62

Ram: Gskill Trident RGB 3000 (XMP Enabled)

GPU: Asus Strix Vega 64 (iGPU Disabled)

Hdd: 1-Adata XPG 8200 PRO NVME 250GB (Osx Boot Drive)

        2-Kingston Hyper X SSD 250GB (Windows)

        3-PNY SSD 960GB (Backup)

EXTRA PCI Cards:

                 1- Unibrain Fireboard Blue PCI-E (For my Firewire Audio Card) Works Great!

                 2- Gigabyte Titan Ridge (Bottom Slot, shows in hackintool)

 

Thank YOU!

 

 

Unpatched.zip

 

 

Hackintool is your friend , and what AudioGod wrote .. PCI info is cosmetic

 

 

Edited by texem
larabee
larabee
Posted
Posted
13 hours ago, Tiem said:

So I'm stumped on this one no amount of google-fu.

 

There's a delay in emojis being placed into the message box. A long one. I've tested a real Mac and there is a slight one (.5s) but on my Hack it's a good 3-4s to go from emoji picker to message box. Is this the 5700 XT?

What message box you have problem on? I assume the iMessage? 

I'm using a 5700XT too and the emojis are working fine, no delay at all. On my real iMac pro, it's instant. I tested it on FB, iMessage, and almost anything that support emojis. The only thing Ive not tested is the Animoji. 

tasc
tasc
Posted
Posted
14 hours ago, Tiem said:

So I'm stumped on this one no amount of google-fu.

 

There's a delay in emojis being placed into the message box. A long one. I've tested a real Mac and there is a slight one (.5s) but on my Hack it's a good 3-4s to go from emoji picker to message box. Is this the 5700 XT?

 

I've noticed some delays like that when running iMac19,1 with the iGPU enabled. For example, you'll see a 4 second delay when opening activity monitor. This happens on a real iMac19,1 as well. I'm running on iMacPro1,1 - and the delay is no longer there for activity monitor. Not sure if this affects the issue you are seeing, but maybe worth a shot.

  • Thanks 1
larabee
larabee
Posted
Posted
14 minutes ago, tasc said:

 

I've noticed some delays like that when running iMac19,1 with the iGPU enabled. For example, you'll see a 4 second delay when opening activity monitor. This happens on a real iMac19,1 as well. I'm running on iMacPro1,1 - and the delay is no longer there for activity monitor. Not sure if this affects the issue you are seeing, but maybe worth a shot.

 

Adding to this, click on about this Mac, there is a delay before the graphic card show up. Not sure if this is 5700XT problem or not. 

But definitely the emojis are just as fast as it is on my iPhone or iPad. 

Tiem
Tiem
Posted
Posted
36 minutes ago, tasc said:

 

I've noticed some delays like that when running iMac19,1 with the iGPU enabled. For example, you'll see a 4 second delay when opening activity monitor. This happens on a real iMac19,1 as well. I'm running on iMacPro1,1 - and the delay is no longer there for activity monitor. Not sure if this affects the issue you are seeing, but maybe worth a shot.

Interesting. I hadn’t thought about the model affecting this. Makes sense tho. Thanks :)

 

I also see a delay in AM btw.

20 minutes ago, larabee said:

 

Adding to this, click on about this Mac, there is a delay before the graphic card show up. Not sure if this is 5700XT problem or not. 

But definitely the emojis are just as fast as it is on my iPhone or iPad. 

The delay on the graphic card details appearing can be solved by adding your card manually to your Bootloader.

 Share
Go to topic listing
×
×
  • Create New...