Jump to content

Glasgood's macOS Mojave [SUCCESS][GUIDE] for Aorus Z390 Pro

glasgood

By glasgood,
in Installation Guides

 Share
1561 posts in this topic

Recommended Posts

AudioGod
AudioGod
Posted
Posted (edited)

@glasgood I hope your good buddy,

I got my build fully working last night with your new efi and everything great but what do you reckon about it turning my vega56 into a 64?

I still cant get my head around it. I'm guessing if I want to stop it doing that then the only thing I can do is stop using Kamarang and go back to the bog standard frame buffer or is there something else I could do?

 

I'm liking everything about the new efi otherwise :)

Oh and also what's the deal with the h100i now?

It's being used in the build I'm doing for somebody else.

And lastly I still don't have the replacement rx580 for the build I'm doing so I havnt put mojave onto it yet but if you were planning on doing a igpu version of the efi and want me to test it then just let me know buddy and pass over the efi to me and il get right on it for you. :)

Edited by AudioGod
glasgood
glasgood
Posted
  • Author
Posted
12 minutes ago, erikmay said:

First of all thank you so much for the reply and the great guide!

But have you watched the video? In your installation video there is a time of 20+ minutes for the installation shown. But at my installation it shows from the beginning 3min and then it just goes black half way.

 

I dont know if this is normal. And how am I supposed to continue if this is normal? Because I already tried to boot into the ssd with clover, but it just shows that there was an error with the installation and that i should repeat the process. :/

 

There is a few reboots during install, at different times. There is no kernel panic shown on your video, your install us shutting down for restart hence unmounting.  When computer restarts, you need to pres F12 and boot from your USB installer then choose "boot macOs from install macOs Mojave "

However, if you still have problems. Then try recreating USB installer and use this PRE-INSTALL Aorus Pro Z390 EFI - RX580.zip 

gino8080
gino8080
Posted
Posted
17 minutes ago, glasgood said:

@gino8080

 

Replace you EFI on your Hackintosh drive with this EFI ==>EFI.zip

 

 

 

Great @glasgood! :thanks_speechbubble:

 

With this new EFI no more Fans spinning like hell!

 

Now I have just to fix my USB3 ports :fiery:

 

glasgood
glasgood
Posted
  • Author
Posted
11 minutes ago, AudioGod said:

@glasgood I hope your good buddy,

I got my build fully working last night with your new efi and everything great but what do you reckon about it turning my vega56 into a 64?

I still cant get my head around it. I'm guessing if I want to stop it doing that then the only thing I can do is stop using Kamarang and go back to the bog standard frame buffer or is there something else I could do?

 

I'm liking everything about the new efi otherwise :)

Oh and also what's the deal with the h100i now?

It's being used in the build I'm doing for somebody else.

And lastly I still don't have the replacement rx580 for the build I'm doing so I havnt put mojave onto it yet but if you were planning on doing a igpu version of the efi and want me to test it then just let me know buddy and pass over the efi to me and il get right on it for you. :)

 

You can try using  Iriri framebuffer. Though I think the previous Vega SSDT from old EFI will also work along side your DSDT, have you tried that ? I have left the cable disconnected from my h100i. But with the latest DSDT using wake from power button, you should be able to connect it.

I have a second DSDT, it will allow wake from keyboard, but wont work if h100i is usb cable connected to motherboard. Not planning on a igpu version, too much work updating everything. 

 

 

Below is the Device Properties patch for igpu.  

<key>Properties</key>
		<dict>
			<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
			<dict>
				<key>AAPL,ig-platform-id</key>
				<data>
				BwCbPg==
				</data>
				<key>AAPL,model</key>
				<string>Intel UHD 630</string>
				<key>AAPL,slot-name</key>
				<string>Internal</string>
				<key>device-id</key>
				<data>
				kj4AAA==
				</data>
				<key>device_type</key>
				<string>Graphics Processor</string>
				<key>enable-hdmi20</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con0-pipe</key>
				<data>
				EgAAAA==
				</data>
				<key>framebuffer-con1-busid</key>
				<data>
				BgAAAA==
				</data>
				<key>framebuffer-con1-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con1-pipe</key>
				<data>
				EgAAAA==
				</data>
				<key>framebuffer-con2-busid</key>
				<data>
				BAAAAA==
				</data>
				<key>framebuffer-con2-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-con2-pipe</key>
				<data>
				EgAAAA==
				</data>
				<key>framebuffer-con2-type</key>
				<data>
				AAgAAA==
				</data>
				<key>framebuffer-patch-enable</key>
				<data>
				AQAAAA==
				</data>
				<key>framebuffer-unifiedmem</key>
				<data>
				AAAAgA==
				</data>
			</dict>
		</dict>

 

 

 

12 minutes ago, gino8080 said:

Great @glasgood! :thanks_speechbubble:

 

With this new EFI no more Fans spinning like hell!

 

Now I have just to fix my USB3 ports :fiery:

 

 

What BIOS version are you using and did you try connecting different USB 3.0 devices ?

 

  • Like 1
glasgood
glasgood
Posted
  • Author
Posted

 

@AudioGod @larabee

 

I was reading that Japura is framebuffer used on the iMac Pro. :) wonder if it would work for you guys!

  

------------------------AMD10000Controller.kext-------------------------



Kamarang (4) @ 0x5ed30
DP, DP, DP, HDMI
000400000403000000010101000000002205020200000000
000400000403000000010201000000001204010100000000
000400000403000000010300000000001000050500000000
000800000402000000010400000000002001060600000000



Japura (6) @ 0x611a0
LVDS, LVDS, DP, DP, DP, DP
020000000001000008010151220000002205020200000000
020000000001000008010261120000001204010100000000
000400000001000000010313400000002001050600000000
000400000001000000010423300000001000060500000000
000400000001000000010543600000001102030300000000
000400000001000000010633500000002103040400000000




Iriri (4) @ 0x6f730
DP, DP, DP, HDMI
000400000403000000010101000000002205020200000000
000400000403000000010201000000001204010100000000
000400000403000000010300000000001000050500000000
000800000402000000010400000000002001060600000000




-------------------------AMD9500Controller.kext-------------------------

Orinoco (5) @ 0x6ef30
DP, DP, HDMI, HDMI, DVI-D
000400000403000000010101000000001204060100000000
000400000403000000010201000000002205040300000000
000800000402000000010300000000001102010200000000
000800000402000000010400000000002103050400000000
040000000400000000010500000000000000030600000000


Acre (3) @ 0x6f360
DP, HDMI, DVI-D
000400000403000000010101000000001102020100000000
000800000402000000010200000000002103050400000000
040000000402000000010300000000000000030500000000

 

gino8080
gino8080
Posted
Posted
49 minutes ago, glasgood said:

What BIOS version are you using and did you try connecting different USB 3.0 devices ?

 

Sorry @glasgood i Feel so Stupid!!

Yes I'm on F10 and...

 

USB3 PORTS ARE WORKING !!! :thumbsup_anim:

 

I was trying with an old usb 2 ( or maybe even worse usb 1  device!) :blush:

Trying with a modern usb 3 and also usb3C device they works all !!

 

so the usb 3 ports onboard works ONLY with a usb3 device is it correct?

 

THANK YOU VERY MUCH @glasgood you are my saver!!! :sorcerer:

 

 

AudioGod
AudioGod
Posted
Posted
1 minute ago, glasgood said:

 

@AudioGod @larabee

 

I was reading that Japura is framebuffer used on the iMac Pro. :) wonder if it would work for you guys!

  


------------------------AMD10000Controller.kext-------------------------



Kamarang (4) @ 0x5ed30
DP, DP, DP, HDMI
000400000403000000010101000000002205020200000000
000400000403000000010201000000001204010100000000
000400000403000000010300000000001000050500000000
000800000402000000010400000000002001060600000000



Japura (6) @ 0x611a0
LVDS, LVDS, DP, DP, DP, DP
020000000001000008010151220000002205020200000000
020000000001000008010261120000001204010100000000
000400000001000000010313400000002001050600000000
000400000001000000010423300000001000060500000000
000400000001000000010543600000001102030300000000
000400000001000000010633500000002103040400000000




Iriri (4) @ 0x6f730
DP, DP, DP, HDMI
000400000403000000010101000000002205020200000000
000400000403000000010201000000001204010100000000
000400000403000000010300000000001000050500000000
000800000402000000010400000000002001060600000000




-------------------------AMD9500Controller.kext-------------------------

Orinoco (5) @ 0x6ef30
DP, DP, HDMI, HDMI, DVI-D
000400000403000000010101000000001204060100000000
000400000403000000010201000000002205040300000000
000800000402000000010300000000001102010200000000
000800000402000000010400000000002103050400000000
040000000400000000010500000000000000030600000000


Acre (3) @ 0x6f360
DP, HDMI, DVI-D
000400000403000000010101000000001102020100000000
000800000402000000010200000000002103050400000000
040000000402000000010300000000000000030500000000

 

 

Let me try it and il let you know..thanks brother :)

glasgood
glasgood
Posted
  • Author
Posted
Just now, AudioGod said:

 

Let me try it and il let you know..thanks brother :)

 

Japura has 4 display ports and 2 LVDS , whereas  Kamarang and Iriri have 3 display ports and one HDMI. So Kamarang and  Iriri are most likely the better options. I don't think Japura will work.

AudioGod
AudioGod
Posted
Posted (edited)
31 minutes ago, glasgood said:

 

Japura has 4 display ports and 2 LVDS , whereas  Kamarang and Iriri have 3 display ports and one HDMI. So Kamarang and  Iriri are most likely the better options. I don't think Japura will work.

 

Yeah that don't sound good but il give it a shot anyway just too see.

 

Kamarang and iriri turn my vega 56 into a 64,  Saying that though I guess it not a bad thing really as I'm getting a huge boost in gpu performance but with no side effects that I have noticed so far.

 

Edited by AudioGod
glasgood
glasgood
Posted
  • Author
Posted (edited)
18 hours ago, larabee said:

 

@glasgood There are a bunch of Glasgood devices in my PCI hahahha. and I need to remove your 960 Pro PCI too... 

553872135_ScreenShot2019-08-02at2_03_23PM.png.aefabfc2c44b830fc1db0afe204964b9.png

 

 

Here is a patch to rename "Samsung SSD....  "

 

Name: Cosmetic PCI Card Rename

 

Find: 53616D73 756E6720 53534420 39363020 50524F20 35313247 42204E56 4D65204D 3220466C 61736820 44726976 65

 

Replace: 4E564D65 204D3220 53534420 466C6173 68204472 697665

 

 

1275547836_Screenshot2019-08-03at15_32_40.thumb.png.9f1e7096167d76026683c3d39695f8a3.png

 

 

 

727578452_Screenshot2019-08-03at15_26_52.thumb.png.382f6813a0db28aa5b51356456542fb4.png

 

 

:)

 

 

 

 

 

 

 

 

Edited by glasgood
tasc
tasc
Posted
Posted

It doesn't look like the new EFI will work with iMac19,1 and enabled integrated graphics, results in a "couldn't allocate runtime area" error on clover boot. So if I move to the new EFI and switch SMBIOS over to iMacPro1,1 and disable integrated graphics, then I can get it to work.

 

With this new setup, I need to figure out how to disable the GPU in slot 2 as it is causing  sleep/wake issues. The SSDT I was using previously to do this doesn't work on the iMacPro SMBIOS without integrated graphics, I'm guessing that changes the hardware too much. @glasgood any idea on how to disable that GPU in slot 2 with this new EFI?

glasgood
glasgood
Posted
  • Author
Posted (edited)
9 minutes ago, tasc said:

The SSDT I was using previously to do this doesn't work on the iMacPro SMBIOS without integrated graphics, I'm guessing that changes the hardware too much. @glasgood any idea on how to disable that GPU in slot 2 with this new EFI?

 

Send me the old SSDT, will have a look. 

Edited by glasgood
tasc
tasc
Posted
Posted
9 minutes ago, glasgood said:

 

Send me the old SSDT, will have a look. 

 

Here it is. This works perfectly when running iMac19,1 with integrated graphics enabled. I'm guessing without integrated graphics, that changes some of the underlying graphics config and causes this to not work anymore. Thanks!

 

SSDT-Designare-Z390-Disable-Slot-2-GPU.aml

Cipha
Cipha
Posted
Posted
2 hours ago, gino8080 said:

 

Sorry @glasgood i Feel so Stupid!!

Yes I'm on F10 and...

 

USB3 PORTS ARE WORKING !!! :thumbsup_anim:

 

I was trying with an old usb 2 ( or maybe even worse usb 1  device!) :blush:

Trying with a modern usb 3 and also usb3C device they works all !!

 

so the usb 3 ports onboard works ONLY with a usb3 device is it correct?

 

THANK YOU VERY MUCH @glasgood you are my saver!!! :sorcerer:

 

 

I posted my SSDT a few pages back, it disables USB-C but enables USB 2.0 and 3.0 on all Ports on the back.

glasgood
glasgood
Posted
  • Author
Posted
10 minutes ago, tasc said:

 

Here it is. This works perfectly when running iMac19,1 with integrated graphics enabled. I'm guessing without integrated graphics, that changes some of the underlying graphics config and causes this to not work anymore. Thanks!

 

SSDT-Designare-Z390-Disable-Slot-2-GPU.aml

 

 

Can you same me an extract from IOReg ==> IORegistryExplorer.zip

 

 

 

1285300588_Screenshot2019-08-03at15_56_17.thumb.png.65bb0f9ffd0e52a80c61f1fdfc29b48d.png

 

 

 

tasc
tasc
Posted
Posted (edited)
4 minutes ago, glasgood said:

 

 

File is corrupted

 

 

2nd try, with feeling this time!

tasc.ioreg.zip

 

Also just ran across this site which gives a couple ways to disable GPUs:

https://khronokernel-4.gitbook.io/disable-unsupported-gpus/option-2-blocking-all-discrete-gpus

 

Looks like it can be done with adding device properties to clover or an SSDT. I'm giving the clover properties a try now. Not sure if one way is better than another. Thanks!

 

Edited by tasc
glasgood
glasgood
Posted
  • Author
Posted
Just now, tasc said:

 

2nd try, with feeling this time!

tasc.ioreg.zip

 

Try copy and paste values from config1.plist  to your main config.plist Should disable your nvidia card in slot 2

 

 

477714245_Screenshot2019-08-03at16_21_05.thumb.png.f4264e8e8540374dd9450796e0515e46.png

glasgood
glasgood
Posted
  • Author
Posted (edited)

@tasc

 

Sorry, made a slight typo last config1.plist sent. Use this one ==> config1.plist 

 

 

1903267783_Screenshot2019-08-03at16_36_39.thumb.png.ecf5c18dbb62d40d20c35a0e662c1eb9.png

 

Edited by glasgood
tasc
tasc
Posted
Posted

Thanks, I'll give that a try in a second here. In the meantime, I was following the instructions to generate an SSDT and I noticed something a little strange when booting and when trying to disassemble the origin DSDT/SSDT files from clover. Early in the boot log, I'm seeing an error about "ACPI Error: AE_ALREADY_EXISTS". Also, when I dump my DSDT/SSDT files from clover and try to disassemble with iasl, I see the same error "ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180427/psobject-371)".

 

One thing I found when researching this error is somebody said "This message indicates that there is a bug in your BIOS. You may report it to the manufacturer, though they probably don't care." Is anyone else seeing this in their boot log on startup? If not, maybe I need to CMOS reset or reflash the BIOS. I'm on F10.

tasc
tasc
Posted
Posted (edited)

I've attached a screenshot of the ACPI boot log errors. I've got a number of AE_NOT_FOUND failures and a namespace lookup failure. Not sure if this is anything to be concerned about or if others are seeing this as well:

 

unnamed.thumb.png.ea0de61c231417d4fd40c01a43f6f20d.png

 

Edited by tasc
glasgood
glasgood
Posted
  • Author
Posted
32 minutes ago, tasc said:

I've attached a screenshot of the ACPI boot log errors. I've got a number of AE_NOT_FOUND failures and a namespace lookup failure. Not sure if this is anything to be concerned about or if others are seeing this as well:

 

unnamed.thumb.png.ea0de61c231417d4fd40c01a43f6f20d.png

 

 

 

 

 

 

 

 

 

Nope, just booted in verbose mode and could not see any ACPI errors. 

 

 

 

 

 

 

 

 

 Share
Go to topic listing
×
×
  • Create New...