Jump to content

Nvidia Web Driver updates for macOS High Sierra (UPDATE Nov 13, 2020)


fantomas
2,046 posts in this topic

Recommended Posts

Big question as far as I’m concerned is whether we’ll see interface performance improvements on-par with what I’ve been seeing on native Mac hardware with Apple-tested Metal support. I believe Metal support was added in NVIDIA’s Web Drivers a little while ago, but I wonder if that’ll be the stumbling block in seeing new beta drivers for these developer previews.

Link to comment
Share on other sites

10.13 NVIDIA 660   boot failure        -v  reboot           Clover     nv_disable=1  Successful startup

 

 

 

 

      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000->0xffffff7f86441fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000
         com.apple.nvidia.driver.NVDAResman(10.2.2)[31F1CA86-E625-320E-A6DC-46FF7FC3943B]@0xffffff7f8646a000->0xffffff7f86750fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000
            dependency: com.apple.iokit.IONDRVSupport(516.28)[3EA927A7-90EC-356A-A07E-B7E4246E5C40]@0xffffff7f8644e000
            dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000
            dependency: com.apple.AppleGraphicsDeviceControl(3.15.26)[DD390B93-7A57-3981-B709-CE0EE9127B5C]@0xffffff7f8645e000
         com.apple.iokit.IOAcceleratorFamily2(348.5)[D748F500-65D8-30C4-AA70-2D245E7851C9]@0xffffff7f86827000->0xffffff7f868b8fff
            dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[441A112D-E54F-3B2C-82A9-9FE928BBE7F9]@0xffffff7f86812000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000
            dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000
         com.apple.GeForce(10.2.2)[0D8C53A6-A9AC-3DB9-8DA0-FF9477799500]@0xffffff7f868c8000->0xffffff7f86962fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[CD25C5B3-4E10-3F20-8C36-C4BD6803ED60]@0xffffff7f86094000
            dependency: com.apple.iokit.IONDRVSupport(516.28)[3EA927A7-90EC-356A-A07E-B7E4246E5C40]@0xffffff7f8644e000
            dependency: com.apple.nvidia.driver.NVDAResman(10.2.2)[31F1CA86-E625-320E-A6DC-46FF7FC3943B]@0xffffff7f8646a000
            dependency: com.apple.iokit.IOGraphicsFamily(516.28)[4850AEE9-AB7B-3F9B-ABC4-8B218016F6A8]@0xffffff7f863ff000
            dependency: com.apple.iokit.IOAcceleratorFamily2(348.5)[D748F500-65D8-30C4-AA70-2D245E7851C9]@0xffffff7f86827000

Link to comment
Share on other sites

Getting a black screen with mouse cursor I can interact with. This is with an internal NVIDIA Quadro 1000M that worked oob until Sierra. Booting in safe mode (-x) works with full resolution but no acceleration. Any help appreciated :worried_anim:

Link to comment
Share on other sites

I will try to explain what I did...I am testing like you and I am not an expert or coder at all..I like to try things:-)

 

so:

I have a working system with 10.12.5 installed

I have downloaded 10.13 beta from apple store

to have it working I have to use clover 4081 (thanks to sherlocks)

I have also to change my cpu kernel patch (thank to PMHeart and Matthew82 to point me in right direction)

I installed from 10.12.5 to a clean disk launching Install macOS 10.13 Beta from application

then when all process is finished I have transferred all my setting from 10.12.5 to 10.13 beta with migration assistant

in this way I have cuda and nvidiadriver installed but not working

I patched with 17A and NVIDIA® WebDriver Updater app

then I have modified AppleGraphicsControl.kext in the same way I do from time

in this way apple policy produce a black screen

if I change inside new kext applegraphiccontrol kext/contents/plugin this file: AppleGraphicsDevicePolicy.kext with an old and patched 10.12.5 one...I have two monitors working and nvidiaweb drivers loaded fine

but poor performance...

so someone could understand how to have performance if possible..or we have to wait nvdia for a correct driver...

 

I can't explain better in English..sorry! :-)

here you go

 

Out of curiosity, did you upgrade to APFS? or leave it as HFS?

Link to comment
Share on other sites

For quick report, my NVIDIA GeForce GT 520M (10de:1050 / GF119) using 10.13's Native NVDA* && Ge* got only a working Cursor with Black Screen and never reach Desktop. But, I think it' s way better than previously WindowServer crash under 10.12.x. Too bad, I then use 10.12.5's CoreDisplay binary framework and it "just works". :lol:

Still waiting for Web Driver under 10.13, but I'm not sure NVIDIA would release it soon for macOS Beta. << I think it would be same on G610 or GT520 which is also GF119. FYi, I'm using Clover v2.4k r4084 and GFX0 Graphics personalities on DSDT (or InjectNvidia=True).

post-826765-0-98025800-1496920388_thumb.png

  • Like 3
Link to comment
Share on other sites

For quick report, my NVIDIA GeForce GT 520M (10de:1050 / GF119) using 10.13's Native NVDA* && Ge* got only a working Cursor with Black Screen and never reach Desktop. But, I think it' s way better than previously WindowServer crash under 10.12.x. Too bad, I then use 10.12.5's CoreDisplay binary framework and it "just works". :lol:

Still waiting for Web Driver under 10.13, but I'm not sure NVIDIA would release it soon for macOS Beta. << I think it would be same on G610 or GT520 which is also GF119. FYi, I'm using Clover v2.4k r4084 and GFX0 Graphics personalities on DSDT (or InjectNvidia=True).

did you set firmware feature in smbios?

Link to comment
Share on other sites

did you set firmware feature in smbios?

 

Yes, but I'm not sure it makes a sense since I installed it using OTF method (from another partition), simply prepare an empty HFS+ Partition, run "Core.pkg" on ".../InstallESD.dmg/Packages" to that Partition. Mount "BaseSystem.dmg" then Copy "boot.efi" located on ".../System/Library/CoreServices" to same path under Target Partition. Reboot ur mach, customize Lang, User etc.. and we're ready to go. That is.  :) 

 

#EDIT: No longer using FirmwareFeature with Clover r4084

  • Like 3
Link to comment
Share on other sites

I will try to explain what I did...I am testing like you and I am not an expert or coder at all..I like to try things:-)

 

so:

I have a working system with 10.12.5 installed

I have downloaded 10.13 beta from apple store

to have it working I have to use clover 4081 (thanks to sherlocks)

I have also to change my cpu kernel patch (thank to PMHeart and Matthew82 to point me in right direction)

I installed from 10.12.5 to a clean disk launching Install macOS 10.13 Beta from application

then when all process is finished I have transferred all my setting from 10.12.5 to 10.13 beta with migration assistant

in this way I have cuda and nvidiadriver installed but not working

I patched with 17A and NVIDIA® WebDriver Updater app

then I have modified AppleGraphicsControl.kext in the same way I do from time

in this way apple policy produce a black screen

if I change inside new kext applegraphiccontrol kext/contents/plugin this file: AppleGraphicsDevicePolicy.kext with an old and patched 10.12.5 one...I have two monitors working and nvidiaweb drivers loaded fine

but poor performance...

so someone could understand how to have performance if possible..or we have to wait nvdia for a correct driver...

 

I can't explain better in English..sorry! :-)

here you go

I did excacly as you did , without modyfying AppleGraphicsDevicePolicy and I get black screen with nv_drv=1 , but full resolution(without QE/CI) using nv_disable=1

Link to comment
Share on other sites

Guest ricoc90

guys, how do I "force" the installer of the web driver for Mac OS 10.12.5 to work on 10.13?

I don't want to migrate data from old partitions of Sierra 

The installer checks the build number of your macOS. You can edit the build number within the installer package (with Flat Package Editor for example, or you can unpack the .pkg through terminal, edit the file and repack the .pkg again), which will let you run the installer.

But the Nvidia drive manager app also checks the build number (and thus won't load the Nvidia drivers, but gives you the error that your macOS version is incompatible). 

It might be possible to edit the buildnumber check within the app too, but then I'm still not sure if the kexts will be compatible with 10.13

 

Within the Distribution file you'll find this, which you'll need to change corresponding to your current build of macOS:

 

var supportedOSVer = "10.12.5";
var supportedOSBuildVer = "16F73";
var targetBuild = system.version.ProductBuildVersion; 
var result = compareBuildVersions(targetBuild, supportedOSBuildVer);
Link to comment
Share on other sites

guys, how do I "force" the installer of the web driver for Mac OS 10.12.5 to work on 10.13?

I don't want to migrate data from old partitions of Sierra 

U can use a NVIDIA® WebDriver Updater.app

Easy Way

  • Like 2
Link to comment
Share on other sites

Guest ricoc90

U can use a NVIDIA® WebDriver Updater.app

Easy Way

Cool :D It will also enable the use of the web drivers on an unsupported buildnumber?

 

Edit: Apparently it doesn't. At least not in my case  :( 

 

BoR2EpO.png

Link to comment
Share on other sites

Followed the same instructions, the web driver loads the frame buffer and shows as GTX 1080, but no graphics acceleration. Can set 165Hz on the monitor, but no transparency/QE/CI. I believe the shift to Metal for the GUI on 10.13 means we'll need new drivers from nVidia to take advantage. Waiting patiently!

Link to comment
Share on other sites

I tried this http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-06052017/page-2?do=findComment&comment=2439371but it did not work. I tried to replace the kexts using these files http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-06052017/?do=findComment&comment=2437874 but when I give boot I get A disconnected cable message on the monitor, but the pc does not restart. I can only enter the system if I use nv_disable = 1

With nv_disable = 1 I get video but no acceleration. And in the nvidia driver manager it appears that I'm using the webdriver.

Anyone can help me please?

post-1531194-0-32093000-1496975386_thumb.png

Link to comment
Share on other sites

×
×
  • Create New...