Jump to content
5451 posts in this topic

Recommended Posts

10 hours ago, MaLd0n said:

take a shot

DSDT.aml.zip

use usb patch limit port for 10.13.4

Thank you Maldon. I tried your DSDT and USB 3 NOW WORKS!!!!!!!!!!!

The only other issue I am having is when the computer goes to sleep it will not wake by pressing a key on the keyboard or moving the mouse... but pressing the power button on the computer will wake the machine. I hope you can help.

I would like to PayPal you something for ALL the help you have given me and others, it is greatly appreciated!

I have attached my RunMe results and my EFI folder.

SPECS: GA-Z170XP-SLI, i5-6700k, Asus RX60 4GB Video Card, SMBIOS 17,1

EFI Folder: https://drive.google.com/file/d/1MtP8oNsFTT3PjKk93So3Fz_IMehacHIx/view?usp=sharing

Run Me Results: https://drive.google.com/file/d/1y2-qxmmb2Biz4RxbCVqigh4MtZkXtYGf/view?usp=sharing

12 minutes ago, bocajoe said:

Thank you Maldon. I tried your DSDT and USB 3 NOW WORKS!!!!!!!!!!!

The only other issue I am having is when the computer goes to sleep it will not wake by pressing a key on the keyboard or moving the mouse... but pressing the power button on the computer will wake the machine. I hope you can help.

I would like to PayPal you something for ALL the help you have given me and others, it is greatly appreciated!

I have attached my RunMe results and my EFI folder.

SPECS: GA-Z170XP-SLI, i5-6700k, Asus RX60 4GB Video Card, SMBIOS 17,1

EFI Folder: https://drive.google.com/file/d/1MtP8oNsFTT3PjKk93So3Fz_IMehacHIx/view?usp=sharing

Run Me Results: https://drive.google.com/file/d/1y2-qxmmb2Biz4RxbCVqigh4MtZkXtYGf/view?usp=sharing

DSDT.aml.zip

Hi MaLd0n, good news, since updating to 10.13.4 no more freezing, I changed my SMBIOS to 18,2. Since updating though, I notice today I have USB port problem. I tried implementing fix, but it does not recognize an external Pioneer BDL drive that my MBP sees or an external drive, this is plugging into USB ports at the front of the tower, rear do not work either. Here is a link to my clover folder.

https://www.dropbox.com/s/hpqefs6kwhv5oap/CLOVER.zip?dl=0

Thank you!

4 minutes ago, ashman1970 said:

Hi MaLd0n, good news, since updating to 10.13.4 no more freezing, I changed my SMBIOS to 18,2. Since updating though, I notice today I have USB port problem. I tried implementing fix, but it does not recognize an external Pioneer BDL drive that my MBP sees or an external drive, this is plugging into USB ports at the front of the tower, rear do not work either. Here is a link to my clover folder.

https://www.dropbox.com/s/hpqefs6kwhv5oap/CLOVER.zip?dl=0

Thank you!

Arquivo Comprimido.zip

5 hours ago, MaLd0n said:

Thank you Maldon. USB 3 still working great. As far as sleep goes with that DSDT when the computer goes to sleep it immediately powers itself back on. I researched it and I think its because of my Corsair H100i Liquid Cooler has a data cable that is causing it to wake it back up. I've read where you can disable the H100i port in a SSDT-UIAC but that is well beyond what I can do.

Ran a couple of test that show possible sleep issues:

  • pmset -g log: Idle sleep preventers: IODisplayWrangler
  • pmset -g assertions: IODisplayWrangler
  • log show --style syslog | fgrep "Wake reason”: XHC

I have my EFI and RunMe results below if that helps:

Specs: GA-Z170XP, i5-6700k, Asus RX460 4GB

EFI: https://drive.google.com/drive/folders/1YADUNBWtk37uSCclE17-ElV9HnEQmmMv?usp=sharing

RunMe Results: https://drive.google.com/file/d/1f5knq3Spenq5RfDzQQmDhyuDkMCqaTtW/view?usp=sharing

Edited by bocajoe
17 hours ago, bocajoe said:

Thank you Maldon. USB 3 still working great. As far as sleep goes with that DSDT when the computer goes to sleep it immediately powers itself back on. I researched it and I think its because of my Corsair H100i Liquid Cooler has a data cable that is causing it to wake it back up. I've read where you can disable the H100i port in a SSDT-UIAC but that is well beyond what I can do.

Ran a couple of test that show possible sleep issues:

  • pmset -g log: Idle sleep preventers: IODisplayWrangler
  • pmset -g assertions: IODisplayWrangler
  • log show --style syslog | fgrep "Wake reason”: XHC

I have my EFI and RunMe results below if that helps:

Specs: GA-Z170XP, i5-6700k, Asus RX460 4GB

EFI: https://drive.google.com/drive/folders/1YADUNBWtk37uSCclE17-ElV9HnEQmmMv?usp=sharing

RunMe Results: https://drive.google.com/file/d/1f5knq3Spenq5RfDzQQmDhyuDkMCqaTtW/view?usp=sharing

the problem is a device XHC, u can try create one ssdt ou edit usbinjectall

Hi,

 

as of now, is the only difference to install 10.3.4 the new port limit patch?

Can I create a High Sierra installer based on 10.13.4 with just that difference?

Thanks a lot.

  • Like 1
16 minutes ago, zzmadd said:

Hi,

 

as of now, is the only difference to install 10.3.4 the new port limit patch?

Can I create a High Sierra installer based on 10.13.4 with just that difference?

Thanks a lot.

yes

  • Like 1
55 minutes ago, MaLd0n said:

yes

The old 15 Port limit patch in the config.plist of your shared EFi points to this driver: com.apple.driver.usb.AppleUSBXHCIPCI

and not to

com.apple.driver.usb.AppleUSBXHCI

does it make any difference?

10 minutes ago, zzmadd said:

The old 15 Port limit patch in the config.plist of your shared EFi points to this driver: com.apple.driver.usb.AppleUSBXHCIPCI

and not to

com.apple.driver.usb.AppleUSBXHCI

does it make any difference?

tes, in 10.13.4 apple change many things

com.apple.driver.usb.AppleUSBXHCIPCI

com.apple.driver.usb.AppleUSBXHCI

  • Like 1
1 hour ago, MaLd0n said:

tes, in 10.13.4 apple change many things

com.apple.driver.usb.AppleUSBXHCIPCI

com.apple.driver.usb.AppleUSBXHCI

sorry for the trivial question: is there a software to compare two dsdt files?
23 minutes ago, gigibatt said:

sorry for the trivial question: is there a software to compare two dsdt files?

u can check it e.g

https://www.diffchecker.com/

Hey @MaLd0n

I am suffering from persistent sleep/wake + crashing issues with my current build and I can't quite put my finger on it. If possible, I would very much appreciate one of your world class DSTD patches. 

I have attached the requested files. 

Many thanks in advance,

level

Build:

CPU: 8700k

Mobo: Asrock z370m-ITX Fatal1ty

Ram: 32gb (2x16gb)

GPU: Sapphire RX 580 Nitro+ 8GB

 

ATTACHMENT: https://www.dropbox.com/s/zvi5kas4tohvg10/Send me HackPro.lan.zip?dl=0

Edited by leVel
36 minutes ago, leVel said:

Hey @MaLd0n

I am suffering from persistent sleep/wake + crashing issues with my current build and I can't quite put my finger on it. If possible, I would very much appreciate one of your world class DSTD patches. 

I have attached the requested files. 

Many thanks in advance,

level

Build:

CPU: 8700k

Mobo: Asrock z370m-ITX Fatal1ty

Ram: 32gb (2x16gb)

GPU: Sapphire RX 580 Nitro+ 8GB

 

ATTACHMENT: https://www.dropbox.com/s/zvi5kas4tohvg10/Send me HackPro.lan.zip?dl=0

CLOVER.zip

Hey MaLd0n,

I'll take on your kind offer to create the DSDT. 

I couldn't upload the bundle here, so, here is the link https://www.dropbox.com/s/gv9bb4kkhrymf92/sendme.zip?dl=0

Let me know if you have any questions.

Thank you very much in advance!

 

 

Edited by m4c0ser

Hi @MaLd0n

My noterbook Dell Latitude E7470.

i try IntelMausiEthernet-V2.3.0 for I219LM but don't work. U can't help me. 

 

Thanks u somuch.

My Clover: https://www.dropbox.com/s/s5t2u6eayimmonu/CLOVER.zip?dl=0

 

Edited by liemhatang

@MaLd0n  I cannot get battery percentage even with rehabman acpi battery kext :(

Cannot open the dsdt you  patched , gives acpi tables error,

Plz have a look, Seems need a battery patch for dsdt. laptop model is HP X360 13 a010dx. corei3 4030U 1.9ghz.

https://drive.google.com/open?id=1HNlvcuDak2bIODsZwj8ZHSQOti0hv2WZ

6 hours ago, m4c0ser said:

Hey MaLd0n,

I'll take on your kind offer to create the DSDT. 

I couldn't upload the bundle here, so, here is the link https://www.dropbox.com/s/gv9bb4kkhrymf92/sendme.zip?dl=0

Let me know if you have any questions.

Thank you very much in advance!

 

 

http://www77.zippyshare.com/v/KNv736yr/file.html
 

6 hours ago, liemhatang said:

Hi @MaLd0n

My noterbook Dell Latitude E7470.

i try IntelMausiEthernet-V2.3.0 for I219LM but don't work. U can't help me. 

 

Thanks u somuch.

My Clover: https://www.dropbox.com/s/s5t2u6eayimmonu/CLOVER.zip?dl=0

 

is just a kext, u need it

43 minutes ago, Rafeh said:

@MaLd0n  I cannot get battery percentage even with rehabman acpi battery kext :(

Cannot open the dsdt you  patched , gives acpi tables error,

Plz have a look, Seems need a battery patch for dsdt. laptop model is HP X360 13 a010dx. corei3 4030U 1.9ghz.

https://drive.google.com/open?id=1HNlvcuDak2bIODsZwj8ZHSQOti0hv2WZ

check correct model in repo

Hi mald0n
Iam creating high Sierra 10.3.4 usb in dikmakerx and terminal but cant see osx install icon in clover boot pls help me
I used your clover folder and latest Lilu and apfs


Sent from my GT-I9195 using Tapatalk

MaLd0n hi! I looked at our correspondence and saw that you asked me to send the second time Send My file after the first reboot of the system, after you sent me your send my! I did not send, Do I have to do this? ((

dear MaLd0n 
recently i updated to 10.13.4 update m i having issue with screen...its flickering 
as you know i have intel 630 graphics so will ya plz help me ? 

  • Like 1
×
×
  • Create New...