Jump to content
350 posts in this topic

Recommended Posts

DisplayPort and DVI seem to be the only ports that works at all, and only 1 monitor on boot. Having HDMI plugged in causes the framebuffer to freak out, and having a DVI monitor plugged in works, but only after it's already booted. Having it plugged in on boot cause a black screen kernel panic.

 

It could be a port layout issue, but I'm more inclined to think it's just the buggy beta Pascal drivers.

  • Like 1

Am I required to use the Clover folder you provided for the DSDT to work?

S/N: Hey, u should consider compiling all the DSDT's you've created for others into package or 'auto-patcher' like u did in the old days. Just a thought

  • Like 1

Am I required to use the Clover folder you provided for the DSDT to work?

No, but all u need is there ;) i think :P

S/N: Hey, u should consider compiling all the DSDT's you've created for others into package or 'auto-patcher' like u did in the old days. Just a thought

one by one, step by step jajajaja the best for others bios version

There are so many years, very natural ;)
  • Like 1

 

No, but all u need is there ;) i think :P

one by one, step by step jajajaja the best for others bios version

There are so many years, very natural ;)

 

So I installed the DSDT. I presume that it's not patched to be HDMI audio-ready is it?

  • Like 1

Hey, Franky

Check

attachicon.gifDSDT.Frank 01.zip

HDMI start in ioreg

U use hdmi cable now?

When I sent my orig IOReg I was using an HDMI cable then. I will try out your new DSDT after get off work

  • Like 1

Hey, Franky

Check

attachicon.gifDSDT.Frank 01.zip

HDMI start in ioreg

U use hdmi cable now?

HDMI audio still isnt showing up in Sound Prefs. Restarted my system w/ your new DSDT copied to CLOVER/ACPI/patched folder

  • Like 1

Hey MaLd0n, I have the issue described here: http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-04192017/?p=2410031

 

I have uploaded my DSDT, SSDT, IOReg, and Config:

DSDT-SSDT-Config.zip

 

IOReg (38mb!):

https://mega.nz/#!ZVkCGDaJ!uta7py0BSs0eKMwj2pLKLnNvm8fe8dZnrdh7t50ZRTs

 

Wasn't sure which files to upload so I did all of them. So far everything works but I get that Safari icon issue with the GTX-1080.

  • Like 1

Check

Replace folder

CLOVER.zip

Run it

Olarila.command.zip

 

Disable IntelHd in bios

 

What about SSDTs? Wrong patches.

U dont have Power Management

 

Send me new ioreg after reboot

 

btw, the Pascal drivers is very new and have many problems

 

let me know

  • Like 1

Check

Replace folder

attachicon.gifCLOVER.zip

Run it

attachicon.gifOlarila.command.zip

 

Disable IntelHd in bios

 

What about SSDTs? Wrong patches.

U dont have Power Management

 

Send me new ioreg after reboot

 

btw, the Pascal drivers is very new and have many problems

 

let me know

 

 

Hey, thanks for you help! I did exactly the above. The new IOReg is (39mb): https://mega.nz/#!kFcGDR4A!LDCi5Roe5rUn0JA6tNZGtUsNyn6yR70iSy5q12cb2ng[/size]

 

The Safari thing still exists. I guess it really is just the [/size]Nvidia drivers. Also, I thought I had power management working.  I ran ssdtPRGen.sh script and moved the SSDTs to the Patched folder. Then when I run the cat /tmp/AppleIntelInfo.dat > ~/Desktop/CPUSleepStates.txt in terminal, it shows:[/size]

 

 

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 800 MHz
CPU Maximum non-Turbo Frequency....: 4000 MHz
CPU Maximum Turbo Frequency........: 4200 MHz
 
IGPU Info:
------------------------------------
IGPU Current Frequency.............:    0 MHz
IGPU Minimum Frequency.............:  350 MHz
IGPU Maximum Non-Turbo Frequency...:  350 MHz
IGPU Maximum Turbo Frequency.......: 1150 MHz
IGPU Maximum limit.................: No Limit
 
CPU P-States [ 36 (40) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 7 ]
CPU C6-Cores [ 0 1 5 6 7 ]
CPU P-States [ (8) 36 38 40 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 5 6 7 ]
CPU C6-Cores [ 0 1 4 5 6 7 ]
CPU P-States [ 8 21 36 38 (40) ] iGPU P-States [ ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 17 21 36 38 (40) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ (8) 17 21 26 36 38 40 ] iGPU P-States [ ]
CPU P-States [ (8) 15 17 21 26 36 38 40 ] iGPU P-States [ ]
CPU P-States [ 8 15 16 17 21 26 36 38 (40) ] iGPU P-States [ ]
CPU P-States [ (8) 11 15 16 17 21 26 36 38 40 ] iGPU P-States [ ]
CPU P-States [ 8 11 15 16 17 21 26 31 36 38 (40) ] iGPU P-States [ ]

 

 

Then with your changes I get:

 

CPU Ratio Info:
------------------------------------
CPU Low Frequency Mode.............: 800 MHz
CPU Maximum non-Turbo Frequency....: 4000 MHz
CPU Maximum Turbo Frequency........: 4200 MHz

IGPU Info:
------------------------------------
IGPU Current Frequency.............: 0 MHz
IGPU Minimum Frequency.............: 350 MHz
IGPU Maximum Non-Turbo Frequency...: 350 MHz
IGPU Maximum Turbo Frequency.......: 1150 MHz
IGPU Maximum limit.................: No Limit

CPU P-States [ 36 (40) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 ]
CPU C6-Cores [ 1 2 4 7 ]
CPU P-States [ 26 36 (40) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 ]
CPU C6-Cores [ 0 1 2 3 4 5 7 ]
CPU P-States [ (8) 26 31 36 40 ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 6 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 26 29 31 36 (40) ] iGPU P-States [ ]
CPU C3-Cores [ 0 1 2 3 4 5 6 7 ]
CPU P-States [ 8 26 29 31 36 38 (40) ] iGPU P-States [ ]
CPU P-States [ (8) 25 26 29 31 36 38 40 ] iGPU P-States [ ]
CPU P-States [ 8 25 26 29 31 36 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ 8 25 26 27 29 31 36 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ 8 25 26 27 29 31 33 36 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ 8 25 26 27 29 31 33 34 36 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ 8 25 26 27 29 31 33 34 35 36 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ (8) 22 25 26 27 29 31 33 34 35 36 38 39 40 ] iGPU P-States [ ]
CPU P-States [ (8) 22 25 26 27 29 31 32 33 34 35 36 38 39 40 ] iGPU P-States [ ]
CPU P-States [ 8 22 25 26 27 29 31 32 33 34 35 36 37 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ (8) 22 25 26 27 28 29 31 32 33 34 35 36 37 38 39 40 ] iGPU P-States [ ]
CPU P-States [ 8 22 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 (40) ] iGPU P-States [ ]
CPU P-States [ (8) 19 22 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 ] iGPU P-States [ ]
CPU P-States [ 8 19 22 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 (42) ] iGPU P-States [ ]
CPU P-States [ (8) 19 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ 8 17 19 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 (40) 42 ] iGPU P-States [ ]
CPU P-States [ (8) 17 19 20 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 ] iGPU P-States [ ]
CPU P-States [ (8) 17 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 ] iGPU P-States [ ]
  • Like 1

if u use Pike SSDT for PM, remove Generate P and C States in ur config.plist

 

Disable intelhdgraphics in bios, try only Nvidia

 

 

I did this, everything works nicely. Still the same safari issue. I'll wait until Nvidia fixes it. Sleep works, power management is working, GPU is working, sound, SSD's, etc. I'll use Chrome in the mean time.

 

Thanks for the patches and all the help! Btw, can I know what you patched in my DSDT so I can learn how to do it as well? I want to know how you got my sound working without the realtekCodec kext and the kext patches I originally had. Both work but I like yours better.

-FIX ERRORS AND WARNINGS
-HPET
-SATA
-DTGP
-SLPB
-DMAC
-DARWIN
-LPC
-XHCI
-PLUGIN TYPE
-HDAS to HDEF
-HDEF
-RTC
-IRQs
-SBUS
-BUS1
-MCHC
-ALS0
-SHUTDOWN
-LAN
-USBX
-PMCR
-EC
-PNLF
-HDMI NVIDIA / ATI

like one iMac17,1 ;)

Check

attachicon.gifDSDT.with HDMI.zip

attachicon.gifDSDT.without HDMI.zip

U can try this kext too, work good

attachicon.gifHDMIAudio.kext.zip

No HDMI audio was available even after using your DSDT.with HDMI.zip. I also tried adding HDMIAudio.kext.zip to "kexts/10.12" while the DSDT was in use but still no avail

  • Like 1

Ok I see, thanks... The screen I'm using is a 42" screen which has no DP ports unfortunately  :( . Time to upgrade

×
×
  • Create New...