Jump to content

[AMD] Yosemite Kernel Testing (for help use the Help Topic)


1,948 posts in this topic

Recommended Posts

Try kernel.10.10.5_rc3 ! Enabled ring0 in kernel. 

If problem reboot , problem boot , need new version boot =)). 

attachicon.gifkernel_10.10.5_rc3.zip

 @Bronya was running your kernel  in my 10.10.1 very smooth updated to 10.10.5 and now no boot, instant reboot. :(

FX8320 | m5a97 le r2.0 | HD 6450

 @Bronya was running your kernel  in my 10.10.1 very smooth updated to 10.10.5 and now no boot, instant reboot. :(

FX8320 | m5a97 le r2.0 | HD 6450

Hi ! Ok , wait for kernel update for 10.10.5 ! 

But need use latest boot ... ))

 @Bronya was running your kernel  in my 10.10.1 very smooth updated to 10.10.5 and now no boot, instant reboot. :(

FX8320 | m5a97 le r2.0 | HD 6450

 

The kernel should work fine. If you've updated did you replace the kernel? The update will update to the vanilla kernel not the AMD one...

The kernel should work fine. If you've updated did you replace the kernel? The update will update to the vanilla kernel not the AMD one...

 

Yes, I have replaced kernel, as Bronya's  10.10.5R3 did not work, I have tested spakk's 10.10.5 v3 kernel. it worked but as I have used -f I can not get login screen, just white screen and mouse rainbow cursor, I can move cursor tho, then I directly power off my PC and booted with -x with worked as I wanted to update caches but my USB didn't work so couldn't operate mouse, so had to power off the pc directly again, this time during boot it showed my partition is corrupt.

I have fixed it with -s mode using fsck but I was getting error

dyld: Library not loaded: (dont remember)

Referenced from: (dont remember)

Reason: image not found

Trace/BPT trap:5

Hi ! Ok , wait for kernel update for 10.10.5 ! 

But need use latest boot ... ))

latest boot? did not understand please guide.

Thanks.!

Ok I have solved the problem with fsb=200

 

but KP

 

 

I can boot with -f but voodooHDA don't work

booted with -f rebuild caches but still same problem.

Hi. You check in extensions file kext system.kext and appleacpiplatform.kext for 10.10.5 !
  • Like 1

Hi. You check in extensions file kext system.kext and appleacpiplatform.kext for 10.10.5 !

 

Thanks I have fixed the problem, with orignal 10.10.5 kext I white screen and rainbow cursor

so by replacing this

http://www.insanelymac.com/forum/files/file/354-amd-replace-kext-for-yosemite/

problem is solved.

thank you so mcuh

by the way, there is a very strange problem. all video's dont sync / match with audio + cracking sound when changing sound.

what did.

update lastest voodooHDA - still same problem.

 

 

fsb=200 video = slow / behind the audio. audio = normal.

fsb=150 video plays too fast. audio = normal + cracking sound solved.

fsb=166 video fast than audio + no cracking sound :)

 

I have tried to change the multiplier to 18 but video slow and cracking sound.

so with fsb=200 I am getting cracked sound + video sync problems :(

with fsb=150 there is not cracked sould but video is running too fast :(

how to I solved this problem?

 

for me mach_10.10_all_amd_rc4.zip by Bronya was a very good kernel but can't run in 10.10.5 :(

Please help.!

Ok  as my FX-3820 have 3500Mhz, and OS X shows 3200MHz I did some math 

if 200=3500

its approx 183 for 3202, this was just working fine.

 

now with fsb=183 its almost perfect, no 100% but 90% audio is also fixed.

but sync little problem :(

Ok, I have updated system.kext and kernel

overall performance is very good.

No problems in sound / audio works great.

kernel booted without using "fsb=200"

No problem in video / audio sync 100% accurate

tested few hours overall very good performance.

one thing I have noted is voodoo pstatemenu always says full 3200HMz even on ondemand performance.it was because system was rebuilding caches

overall everything very smooth thanks for the kernel Bronya

  • Like 1

hi saumil.

Try this kernel !

And you need use latest bootloader . 

This 10105rc4 kernel caused KP or instant reboot for Phenom II x6 1405T hackintosh in 10.10.5

The most stable one for me is this kernel made by Bronya :

Darwin JamesSmiths-Pro 14.5.0 Darwin Kernel Version 14.5.0: среда,  4 ноября 2015 г. 21:26:27 (MSK); ###Bronya###:xnu-2782.40.9/BUILD/obj/RELEASE_X86_64 x86_64

This 10105rc4 kernel caused KP or instant reboot for Phenom II x6 1405T hackintosh in 10.10.5

The most stable one for me is this kernel made by Bronya :

Darwin JamesSmiths-Pro 14.5.0 Darwin Kernel Version 14.5.0: среда, 4 ноября 2015 г. 21:26:27 (MSK); ###Bronya###:xnu-2782.40.9/BUILD/obj/RELEASE_X86_64 x86_64

Hi! This kernel for fx. But you should here picture with panic! 

I have managed fakeSMC

but serial number unknown and certificate problems 


I was getting this

apsd[70]: Hardware SerialNumber "unknown" looks incorrect or invalid

apsd[70]: Hardware SerialNumber "unknown" looks incorrect or invalid

 

so I did

 

 

sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.apsd.plist

 

Serial number is still Unknown but logs disappeared 

btw SMBios.plist is perfect still serial number unknown.

Hi! This kernel for fx. But you should here picture with panic! 

This 10105rc4 kernel also KP for FX-6300 hackintosh at 10.10.5

It's related to IOPCIFamily.kext I guess.

The photo of KP was attached here:

post-70188-0-99432000-1466342762_thumb.jpg

also check kext-dev-mode=1

you forgot 'k'

 

this flag no problem )) in bootloader inserted flag kext-dev-mode , but in monitor show how "ext-dev-mode" - strange bootloader )))

this flag no problem )) in bootloader inserted flag kext-dev-mode , but in monitor show how "ext-dev-mode" - strange bootloader )))

Lol 

is there any way I can monitor sensors? CPU/GPU fan speed etc?

×
×
  • Create New...