dolphans1 Posted June 30, 2013 Share Posted June 30, 2013 My bad. I am so {censored} high right now that I misread you. You have no idea how blazed I am. Sorry. If they aint causing you trouble then its ok to keep them And don't worry about permissions. The installer will take care of that Oh wait, so what you're saying is I must create a whole new USB installer with MavericksPreview2 on it and reinstall? Or can I download it from App store and update it? If I update via app store, must I run myfix via myhack installer afterwards? Thanks, just wanting to get clarification. d-1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929187 Share on other sites More sharing options...
ameris_cyning Posted June 30, 2013 Author Share Posted June 30, 2013 No Do it through the App store and you should be fine. When you reboot, you don't have to boot with -x as you don't have to remove the kexts Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929192 Share on other sites More sharing options...
dolphans1 Posted June 30, 2013 Share Posted June 30, 2013 No Do it through the App store and you should be fine. When you reboot, you don't have to boot with -x as you don't have to remove the kexts Just ran it and updated, took about 11 minutes if not less and I'm back to desktop. Did you notice anything different about the update, performance wise? d-1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929194 Share on other sites More sharing options...
ameris_cyning Posted June 30, 2013 Author Share Posted June 30, 2013 Nope, nothing. In fact in some instances it was snappier than before. On another note, I had to reinstall today because I {censored}ed up my graphic drivers and I knew that I would never be able to fix it. That was my bad because I can be an idiot at this. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929197 Share on other sites More sharing options...
dolphans1 Posted June 30, 2013 Share Posted June 30, 2013 Nope, nothing. In fact in some instances it was snappier than before. On another note, I had to reinstall today because I {censored}ed up my graphic drivers and I knew that I would never be able to fix it. That was my bad because I can be an idiot at this. Yeah noticed that too and now, at least for now, when it wakes up out of sleep, the screen opens up right away. d-1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929224 Share on other sites More sharing options...
ameris_cyning Posted June 30, 2013 Author Share Posted June 30, 2013 Found the reasoning for the problem of not being able to obtain DHCP addys on boot with the ethernet kext: Its an NVRAM issue. Open terminal and type "sudo nvram -c" and reboot Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929227 Share on other sites More sharing options...
dolphans1 Posted June 30, 2013 Share Posted June 30, 2013 I was able to get Skype to work by installing this version - Skype_6.0.0.2946.dmg. http://www.oldapps.com/mac/skype.php?old_skype=10001?download It called for an update for Skype when I loaded it up, I ignored it and it works fine. d-1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929228 Share on other sites More sharing options...
naiclub Posted June 30, 2013 Share Posted June 30, 2013 It is almost like a lack of a HD 4600 + Sound alc 898 + DSDTNow use Voodoohda beforeKext waiting for you to do firstthank Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929237 Share on other sites More sharing options...
smasumi Posted July 1, 2013 Share Posted July 1, 2013 Hey guys, I was wondering what your boot times were on your machines. Mine's well over a minute and a half and restart takes even longer. It seems to be progressively getting worse. I also noticed that sometimes my video works properly, other times it doesn't. Sometimes the menu bar loads translucent and all video is smooth, other times, the menu bar is opaque and everything is choppy. I'm not sure what to attribute this to. I am running DP2. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929538 Share on other sites More sharing options...
ameris_cyning Posted July 1, 2013 Author Share Posted July 1, 2013 A fresh reinstall is what you might need Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929545 Share on other sites More sharing options...
c0ercion Posted July 2, 2013 Share Posted July 2, 2013 Thats an easy fix You have to always boot with -f I figured that out very quickly -f just ignores caches... my kernel cache was updated as soon as I installed the kext. It worked fine for 10 or 20 reboots (Rebooting a lot to test DSDTs) then randomly bugged out one time. It's been fine for another dozen or so reboots since. I very rarely use -f, pretty much only if I can't boot and have to boot from usb to install a kext in S/L/E. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929554 Share on other sites More sharing options...
The Real Deal Posted July 2, 2013 Share Posted July 2, 2013 Hello Gigabyte Z87 owners I bought a Z87-UD3H and my build is running 10.8.5 12F9 Easier board than Asus ; it's been a while since i owned a Gigabyte (EX58-UD5 at the same time that d00d) ; anyway. Here is my main concern, For those with 10.9 and 10.8.5 (and Chameleon r2251 bootloader), do you have the speedstep, CPU throttle, etc,. fully functional? I believe Gigabyte UEFI BIOS are not locked but it needs to patch the AICPUPM.kext? And maybe to generate a SSDT as my previous builds, SB and IB generations? My 4670K got only x2.0, x4.0 and x8.0 multipliers (reported by HWMonitor) ; geekbench score is around 11 000 with 4 Gb RAM @ 1333 ; (it seems decent, but?) EDIT : just done a fresh install of 10.9 DP2, AICPUM + AICPUPMClient are loaded, seems good Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929647 Share on other sites More sharing options...
gaspimp Posted July 2, 2013 Share Posted July 2, 2013 Hello Gigabyte Z87 owners I bought a Z87-UD3H and my build is running 10.8.5 12F9 Easier board than Asus ; it's been a while since i owned a Gigabyte (EX58-UD5 at the same time that d00d) ; anyway. Here is my main concern, For those with 10.9 and 10.8.5 (and Chameleon r2251 bootloader), do you have the speedstep, CPU throttle, etc,. fully functional? I believe Gigabyte UEFI BIOS are not locked but it needs to patch the AICPUPM.kext? And maybe to generate a SSDT as my previous builds, SB and IB generations? My 4670K got only x2.0, x4.0 and x8.0 multipliers (reported by HWMonitor) ; geekbench score is around 11 000 with 4 Gb RAM @ 1333 ; (it seems decent, but?) EDIT : just done a fresh install of 10.9 DP2, AICPUM + AICPUPMClient are loaded, seems good Would you mind posting a walkthrough of what you did to fully enable power management? Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929703 Share on other sites More sharing options...
ameris_cyning Posted July 2, 2013 Author Share Posted July 2, 2013 Anyone have an AppleHDA solution yet? Voodoo is working great, but I'd rather be as vanilla as possible. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929705 Share on other sites More sharing options...
The Real Deal Posted July 2, 2013 Share Posted July 2, 2013 Would you mind posting a walkthrough of what you did to fully enable power management? I'm not sure about the PM under 10.8.5, or maybe HWMonitor reports false values, AICPUMPM and Client are not loaded. LPC and HPET are. And my Geekbench score seems decent. It's kinda blurry to me. Under 10.9 DP2 AICPUPM and Client are loaded, this is great. No DSDT at the moment, no patched BIOS, nor kexts. No clear CMOS (no need to patch RTC, or a modded DSDT) ; sleep, shutdown, restart seems OK ; Ethernet (153b) OK, app store, etc,. sound OK, it looks to be definitely a great board. I am seriously waiting the official release of Mavericks and to use the iGPU and get rid of the discrete card. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929743 Share on other sites More sharing options...
gaspimp Posted July 2, 2013 Share Posted July 2, 2013 I'm not sure about the PM under 10.8.5, or maybe HWMonitor reports false values, AICPUMPM and Client are not loaded. LPC and HPET are. And my Geekbench score seems decent. It's kinda blurry to me. Under 10.9 DP2 AICPUPM and Client are loaded, this is great. No DSDT at the moment, no patched BIOS, nor kexts. No clear CMOS (no need to patch RTC, or a modded DSDT) ; sleep, shutdown, restart seems OK ; Ethernet (153b) OK, app store, etc,. sound OK, it looks to be definitely a great board. I am seriously waiting the official release of Mavericks and to use the iGPU and get rid of the discrete card. Did you need anything special in your Chameleon boot plist to get AICPUPM loaded, like any generate c states / p states stuff? Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929769 Share on other sites More sharing options...
necrophagous Posted July 3, 2013 Share Posted July 3, 2013 Anyone have an AppleHDA solution yet? Voodoo is working great, but I'd rather be as vanilla as possible. i haven't tried that but have you noticed any difference between the mavericks apple hda and the mountain lion one? if there is any, there might be a whole new method to patch it ( not to mention the kext-signature ) Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929848 Share on other sites More sharing options...
The Real Deal Posted July 3, 2013 Share Posted July 3, 2013 Did you need anything special in your Chameleon boot plist to get AICPUPM loaded, like any generate c states / p states stuff? No need Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1929854 Share on other sites More sharing options...
dolphans1 Posted July 4, 2013 Share Posted July 4, 2013 Has anyone installed Pro-SnapZ on this install, will it work...? Or will SnagIt is $50 work? , comes with a dual license for both the Mac and Windows versions. Or how bout Voila costs $30? Or Skitchm, will it work? it's is free. Pro-Snapz is not available on the Mac App Store. Anyone tried any of these on Mavericks? Thanks... d-1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930175 Share on other sites More sharing options...
Kamster Posted July 5, 2013 Share Posted July 5, 2013 ~gaspimp: can you please recompile your ethernet kext to work with 10.8.5? Sorry I didn't see that you published the source, and I did it so now I compiled it against my system and it works perfectly. Thank you for your work. AppleIntelE1000e.kext.zip Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930301 Share on other sites More sharing options...
Cobra03 Posted July 7, 2013 Share Posted July 7, 2013 Anyone have an AppleHDA solution yet? Voodoo is working great, but I'd rather be as vanilla as possible. Not my work but here it is... If use DSDT method do not use HdaEnabler.kext ALC898Solution.zip Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930732 Share on other sites More sharing options...
gaspimp Posted July 7, 2013 Share Posted July 7, 2013 Not my work but here it is... If use DSDT method do not use HdaEnabler.kext Testing this now. I will be so grateful if it works - I have a bunch of issues with VoodooHDA - none major on their own but as a whole it is quite annoying. 1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930733 Share on other sites More sharing options...
Cobra03 Posted July 7, 2013 Share Posted July 7, 2013 Testing this now. I will be so grateful if it works - I have a bunch of issues with VoodooHDA - none major on their own but as a whole it is quite annoying. VoodooHDA did not get the job done for me either. Volume was there, but WAY to soft. It did however allow me to dump the codec and pin configuration. But before I I finished the patches I found this..... 1 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930736 Share on other sites More sharing options...
naiclub Posted July 7, 2013 Share Posted July 7, 2013 Testing this now. I will be so grateful if it works - I have a bunch of issues with VoodooHDA - none major on their own but as a whole it is quite annoying. I miss the sound of it already http://www.insanelymac.com/forum/topic/289812-applehda-patching-in-109-mavericks/page-5?do=findComment&comment=1930410 not work with 10.8.x this is only for 10.9 Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930744 Share on other sites More sharing options...
gaspimp Posted July 7, 2013 Share Posted July 7, 2013 Not my work but here it is... If use DSDT method do not use HdaEnabler.kext Success! Thank you! By the way for all Gigabyte users, it seems like beta BIOS F6L from http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios.html has finally fixed my issues with SATA 6 gigabit devices running at 3 gigabit. Link to comment https://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/page/7/#findComment-1930747 Share on other sites More sharing options...
Recommended Posts