Jump to content
Sign in to follow this  
Followers 0
Ryuujix

Need a little help ! ASUS X53SV

17 posts in this topic

Recommended Posts

Hi InsanelyMac's community ! I hope your going well !

 

I send this message to request your help ^^. Indeed, I installed OSX Mountain Lion on my ASUS X53SV. And it works pretty well ! I was all the more astonished since all the components were recognized by kexts in this site !

(If you put a little investment of yourself, you will get there ! All it takes to make this manipulation is in this site :D It's worth it !)

 

Well, almost of these components worked well … :D

The only issue is my wireless, my webcam and my USB 3.0. I tried to install these kexts corresponding but in vain.

Futhermore, I recieved a kernel panic one time in two when I want to boot up my "Hybrid" computer, and I don't know why :/

Also, I have a freeze who they tell me to reboot my computer without knowing why. Like, I'm playing the Russian roulette in going on my PC !

 

So if anybody who have a solution of these issues, I would take it cheerfully !

 

Thanking you in advance,

Sincerely yours,

RyuujiX

 

P.S : I attached the kernel panic that I see when I boot my PC :

img0036mn.jpg

Share this post


Link to post
Share on other sites
Advertisement

for kernel panics, you need to post your screenshot with -v booting flag.

Share this post


Link to post
Share on other sites

Boot with -f -v and check that your using smbios that matches your hardware as best as possible

Share this post


Link to post
Share on other sites

what do you mean booting your hybrid computer ?

plus, it's better to post your specs here

Share this post


Link to post
Share on other sites

I will try to put a MacBook Pro 8,2's SMBIOS right now. Is it right ?

 

Here is my specs :

  • Processor: 2nd Gen Core i7 Intel i7-2670QM / 2.2 GHz ( 3.1 GHz ) ( Quad-Core )
  • Memory: 6 GB / 8 GB (max)
  • Hard Drive: 750 GB - Serial ATA-300 - 5400 rpm
  • Display Type: 15.6 in TFT active matrix
  • Graphics Processor: NVIDIA GeForce GT 540M + Intel HD 3000 Graphics
  • WLAN b/g/n, 2x USB 2.0, 1x USB 3.0
  • HDMI / VGA

No, in meaning hybrid computer, is to tell that my computer is a computer who welcomed OSX where normally he welcomed W7 and not OSX (A kind of diminutive.)

Share this post


Link to post
Share on other sites

Boot with -v -x and then delete Nvidia and AppleIntelCPUPowerManagement.kext from extension (NVDGF100HAL, NVDANK100HAL, NVDANV40HALG7, NVDANV50HAL and NVDARresman.kext. reboot

Share this post


Link to post
Share on other sites

I don't see anything related to your graphics, kextd which is causing kernel panic, is system process responsible for building your boot kernel cache. Booting with -f should avoid any KP, but is slower than booting with cache, check chameleon plist for Use Kernel Cache=Yes/No. Also rebuild cache while you have console open and see if any errors. Use terminal command:

sudo touch /System/Library/Extensions

If any kext is preventing cache from building properly remove it, very well could be graphics kext, or others

Share this post


Link to post
Share on other sites

(As an aside, can you can help me on the Wi-Fi ? I tried to install the kext for Atheros Asus X53SV but in vain.

By going to the network panel, I have the only choice of Ethernet :/)

Share this post


Link to post
Share on other sites

Hi!

 

Which version of Mountain Lion are you using? If you're trying the latest, 10.8.2, the solution is as simple as it can be: google for kozlec's FakeSMC (or search here on insanelymac for a thread callled HWSensors). Then install it and you're good to go.

 

Good luck.

Share this post


Link to post
Share on other sites

@theconnactic : I successfully update to 10.8.2 and I found that : http://www.insanelymac.com/forum/topic/275429-hwsensors/page__hl__%20hwsensors

But, I don't understand how it works ( ^^ " ). Do I have installed something ? Because there are any FakeSMC.kext, I can see a FakeSMC folder, but inside there are files that I don't know what is it.

Maybe I took it wrong ?

Share this post


Link to post
Share on other sites

No it's good :D I finally installed HWMonitor with your help. The download button was well hidden ...

I took this version: HWSensors 1.0.115.pkg

But two problems have persisted :

...The first is that Wi-Fi is still unavailable :/

...The second is that by curiosity, I turning on HWMonitor, and I could see that the CPU is near 239 ° F and displayed in red. Should I not worry of that or whether instead?

(CPU cores n°1,2,3,4 turn around 104-113 °F and they are displayed in black which mean theoretically normal)

 

But the good news is that for now there is no kernel panic on the horizon.

One thing that thank the community very much by the way :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By angel___eyes
      CONFIG:   Intel Pentium G3220 @ 3.00 Ghz ASUS H81M-CS - Rev. 1.0 - UEFI Bios 0402 (Lan - Realtek 8111GR | Audio - ALC 887) 4GB DDR 3 HDD 500GB SATA Nvidia 210 1GB VGA Monitor   I have this config with me, and need to learn xcode....   Needed to know will i be able to install High Sierra on this rig...?
    • By suweiwilson
      I want to install High Sierra.
      I can get into the installation screen,but after the installer in my USB flash put something into my internal disk and I booted to "install macOS from internal disk",the following error occurred:

       
      my hardware:
      GA-x99m-gaming 5
      i7-6800k
      nvidia-gtx-970
       
      my EFI is in EFI.rar
       
      my error log is in Installer Log.txt.
      How to fix this problem?
      EFI.rar
    • By Ganesh1990
      Hi,
       
      Can Anyone suggest how to disable USB mass Storage in High Sierra, iam currently running 10.12.6 version, 
      I have Tried the Following steps which came across search in google, 
      I Have deleted,
      IOUSBMassStorageClass.kext
      IOUSBMassStorageDriver.kext
      from /System/Library/Extensions folder and tried 
      sudo touch /System/Library/Extensions
      But still My USB Pendrive is detecting.
      Can anyone please help me...
    • By MaLd0n
      ***The topic is for Notebooks and Desktops*** Mojave Full DSDT patch http://olarila.com/forum/viewtopic.php?f=59&t=6428 First... ***Update bios to last available version!***   If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   This guide is not a step by step, if you need one, see here   Look at my Clover folders and understand what we really need, this is the best way to learn     1-Installation     --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  -Serie 100/200/300 CLOVER.zip   --Install Sierra/High Sierra and boot into system! 2-Post Installation     --Install Clover in HDD/SSD and replace with my folder -Serie 100/200/300 CLOVER.zip   --Reboot and activate video!   3-Video     -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/ -Check it, easy way nvidia-update.command.zip by Benjamin-Dobell   4-DSDT     --DSDT mobo GA Z270 Gaming K3 DSDT.MaLd0n Gigabyte GA Z270 Gaming K3.zip   --DSDT mobo Asus ROG STRIX Z370 F Gaming DSDT.MaLd0n Asus ROG STRIX Z370 F Gaming.zip   --DSDT mobo Asus ROG Strix Z370-G Gaming DSDT.Asus ROG Strix Z370-G Gaming.zip   --DSDT mobo GA Z170XP SLI DSDT.MaLd0n GA Z170XP SLI.zip   --DSDT mobo ASROCK Z170  EXTREME 7 DSDT.MaLd0n ASROCK Z170 EXTREME 7.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC* -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS* -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -IMEI -EC -PNLF(Nvidia/AMD) -HDMI ---To avoid problems use some patches in config.plist, don't forget!--- GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 5-SSDT   Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha https://github.com/Piker-Alpha ssdtPRGen.command.zip   or just use "plugin-type"=0x01 in DSDT, SSDT or Clover config.plist   for check Power, Frequency, Temperature and Utilization, use it Install Intel Power Gadget.pkg.zip   6-Brightness  
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
        -Clover   https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Lan driver by Mieze     -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   -Links     -FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   if u like, Rate Topic     It's time to Rock -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, badruzeus and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
×