kdiamant Posted December 4, 2008 Share Posted December 4, 2008 Intel Pro Wireless 3945ABG, Audio Realtek. Does it work this hardware and what i will need to choose? Thank you Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-987709 Share on other sites More sharing options...
sdmac Posted December 4, 2008 Share Posted December 4, 2008 Hey I am getting the dreaded grey screen at install right when I boot to the DVD for the first time. I attached some pictures of the screen in -v so you can see what I am looking at. Any help anyone can offer would be greatly appreciated My comp is a: Dell D830 Laptop Intel Core 2 Duo T7100 1.8ghz 2 Gigs Ram chipset is a Intel GM965 BIOS Version A12 Dell wireless 1490 dual band NVIDIA Quadro NVS 135M Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-987829 Share on other sites More sharing options...
macromo Posted December 4, 2008 Share Posted December 4, 2008 Hi guys! This release can be installed on my Intel P4 HT 3.0GHz? Thanks a lot! Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-987943 Share on other sites More sharing options...
giuv5 Posted December 4, 2008 Share Posted December 4, 2008 HELLO BOYS DO NOT KNOW HOW DO I HAVE A PC FIN TIME HAD IDENEB 1.3 HO AND WAS ALL THAT ONLY WITH VANILLA VOLEVO SKIP A iATKOS 5th 10.5.5 Intel DVD because I wanted to put the EFI 9 BUT AFTER I HAVE A PROBLEM WITH THAT installs all GUID Partition HOW I WAS ON THE ERROR IDENEB VA BOOT0 ERROR BOOT0 GUID BOOT0 HFS ERROR AND DO NOT BE NEXT MY CONFIGURATION is INTEL QUAD CORE Q6600 ASUS P5KC 4 GB DDR2 800 320 WESTERN DIGITAL ATI RADEON HD 2600 XT HOW NOT TO DO SO WHY EVEN refer the MBR Partition IS INSTALLED AFTER AN INDENT flashing and stopped SO THAT CAN I DO? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988062 Share on other sites More sharing options...
TimeActor Posted December 4, 2008 Share Posted December 4, 2008 So Guy´s i´ve try it once more Now in Terminal i use the command "uname -a" shows me: 9.5.0 Darwin Kernel Version 9.5.0: Wed Nov 26 22:39:57 PST 2008; Voodoo; RC1 :xnu-1228.7.58/BUILD/obj/RELEASE_I386 i386. I hope, this is the new one!? Repair Permissions shows me the following line: ACL found but not expected on "Library/Preferences/SystemConfiguration/com.apple.Boot.plist" How can i fix this little issue? Thanx from an specialist answer! Martin Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988089 Share on other sites More sharing options...
raggedjagged Posted December 4, 2008 Share Posted December 4, 2008 Can I install Audio Kexts for my motherboard in the /Extras/Extensions folder? and how can I do it? How do I open /Extras/Extensions folder in Finder? It seems to be hidden! Thanks. Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988114 Share on other sites More sharing options...
wolsplatinum Posted December 5, 2008 Share Posted December 5, 2008 I have an on board realtek rtl8139 I installed the reltek 8139 driver by orByte and it did not work, it said it was connected but may not have an ip and may not be able to connect, i couldnt connect,(besides it still remained the saying the smae thing even when the ethernet cord was unpluged, including when i restarted it with it unpluged. I am reinstalling IATKOS 5i because i tried to install "HDA GA-EP45-DS3R" apple hda driver For Audio use HDAEnabler + patched AppleHDA after OSX installation. Maasey Racer posted this link http://www.mediafire.com/?jzziytmjnyo for the Audio kexts. You can find "Kext Helper" or "OS X86 Tools" to install them. After I finished I used OSX86Tools to modify the "About this Mac" box so it listed my RAM and CPU correctly. Everything works just fine, including sleep, restart, time machine. Everything is recognized correctly by System Profiler and I just ran software update and everything updated just fine including security update. Hope this helps. What ended up happening is it made my audio not work at all, including trhe headphone jack that was working before i added the udio kexts I also have a INTEL PRO / WIRELESS 3945ABG and i have been searching for a driver for it. It would be great if that worked, if i had to choose between the ethernet and the wireless i would much rather have the wireless because then i could also go online at school. I would be very happy to know if I am selecting the right driver for my ethernet to work, and when I reinstall should I have my LAN plugged in or disconected and should I switch my wifi on or off. If it helps I have been installing everytime before with them plugged in. And are there any drivers that could possibley work with my wireless card Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988260 Share on other sites More sharing options...
SquireSCA Posted December 5, 2008 Share Posted December 5, 2008 I cannot get this distro to install. Kalyway 10.5.2 installed just fine with no messing with drivers or kexts. This one installed, says it must reboot, and it starts to load, and then says it needs to restart, no error. Just stuck in this loop where it keeps saying to restart. What should I look for? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988326 Share on other sites More sharing options...
SquireSCA Posted December 5, 2008 Share Posted December 5, 2008 Ok, I can get it to boot into the OS, I found the right settings, but I cannot seem to get the right video drivers installed for an NVidia 8800GT. Anyone point me to the right one? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988346 Share on other sites More sharing options...
a5hr1th Posted December 5, 2008 Share Posted December 5, 2008 Can I install this on a P4 3.0GHz ? Or suggest any distro which is great for P4 Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988356 Share on other sites More sharing options...
SquireSCA Posted December 5, 2008 Share Posted December 5, 2008 OK, I used the NVKush driver, and it booted, had sound, set everything up and everything looks awesome. Recognizes all 4 CPU cores. But Ethernet does not work, either port. I selected the Marvel driver, that is what it has according to my mobo owner's manual, and I think that is what I used with the Kalyway disc. Nevermind, got it working. One port was disabled in BIOS. For whatever reason, the one I used on Kalyway worked fine, but with this version I had to enable the 2nd LAN port and use that. Seems to work fine now. Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988360 Share on other sites More sharing options...
stroemarius Posted December 5, 2008 Share Posted December 5, 2008 Someone help me on this! I can only see a grey screen. I`ve installed the iKATOS_5i, everything went ok during install but after reboot I can only see a grey screen. I hear the intro music I think, and I have keyboard and mouse control (i can adjust volume). If someone know what it might be the cause please reply! I feel I am close to succed. My laptop is Toshiba Equium P300-19O -Intel Core 2 Duo processor T5750 2 Ghz -3 Gb DDR2 667Mhz - 250 Gb Hdd - display 17" Toshiba TruBrite® WXGA+ TFT High Brightness display resolution : 1440 x 900 - graphic adapter Intel® GMA X3100 From drivers I choose the Intel driver for display adapter. Could it be the unusual resolution of 17" display? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988401 Share on other sites More sharing options...
fireedo Posted December 5, 2008 Share Posted December 5, 2008 you have to choose the right kext of EFI string for your graphic card you can use boot 132 iso to edit your iAtkos installation Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988407 Share on other sites More sharing options...
DickDuff Posted December 5, 2008 Share Posted December 5, 2008 wolsplatinum: I found this in the Insanelymac Portuguese forums. I haven't got a clue what they were saying but there was a link to this driver for your wireless card: http://iwidarwin.googlecode.com/svn/trunk/...0.5/iwi3945.dmg I have no idea if it will work or blow your machine up. Good luck with it! wolsplatinum: To actually see what's going on with Darwin driver development for your Intel 3945 wireless card you can go here: http://code.google.com/p/iwidarwin/ They also have the latest OS X development drivers posted as well. Hope that helps! Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988426 Share on other sites More sharing options...
TimeActor Posted December 5, 2008 Share Posted December 5, 2008 I´m using iAtkos 5i without any problems! Thanx once more! I´ve changed the Beta RC2 Kernel to the new RC1 XNU Kernel successfully but i would repair Disk Permissions and in Terminal i use "diskutil repairPermissions" shows me the following line: ACL found but not expected on "Library/Preferences/SystemConfiguration/com.apple.Boot.plist" I have renamed the RC1 Kernel in root as "voodoo" and in com.apple.bootplist from custom also to "voodoo". How can i fix the little issue in Disk Utility? Many thanx! Greets Martin from Germany Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988513 Share on other sites More sharing options...
SquireSCA Posted December 5, 2008 Share Posted December 5, 2008 For me, to get it to work, I had to use Chameleon instead of the EFI booter. Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988545 Share on other sites More sharing options...
Rapscallion Posted December 5, 2008 Share Posted December 5, 2008 Thank you for this! I just got everything working and I am set up for full updatability (which I have already done without a single problem)! I have an Intel DG965OTMKR mobo with a 2.4Hgz quad-core and an ATI 2400 HD. I was able to use my kexts for the audio & video from my kalyway 10.5.2 install along with the latest natit from netkas.org (the one on the installer crashed my system) and everything's is working great! I even have full CI/QE! What I don't have though, are all my cores! I have to boot with the "cpus=1" flag or I end up in an endless boot cycle. Is there anything that can be done so I can utilize my full computing potential while preserving the fact that my machine can now be updated through software update? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988547 Share on other sites More sharing options...
raggedjagged Posted December 5, 2008 Share Posted December 5, 2008 Can someone please teach or help me on how to install the Audio kexts for my motherboard (ALC889a chip) into /Extras/Extensions? Which kexts should I use? or should I use EFI Strings? Someone please helppppppppppppppp!!! Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988708 Share on other sites More sharing options...
TimeActor Posted December 5, 2008 Share Posted December 5, 2008 Can someone please teach or help me on how to install the Audio kexts for my motherboard (ALC889a chip) into /Extras/Extensions? Which kexts should I use? or should I use EFI Strings? Someone please helppppppppppppppp!!! Hi why did you not use an HDA Patcher from Taruga? I think you need the HDA patcher 1.20 and the correct Codec Dump to fix it! Take a look: http://forum.insanelymac.com/index.php?showtopic=32859 Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988749 Share on other sites More sharing options...
raggedjagged Posted December 5, 2008 Share Posted December 5, 2008 Hi why did you not use an HDA Patcher from Taruga? I think you need the HDA patcher 1.20 and the correct Codec Dump to fix it!Take a look: http://forum.insanelymac.com/index.php?showtopic=32859 But I want something that installs in /Extra/Extensions, but i dont know what commands to perform to verify/repair/tocuh the kexts, and how to re-make the kext cache for Extensions.mkext. Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-988990 Share on other sites More sharing options...
Dr. Hurt Posted December 5, 2008 Share Posted December 5, 2008 Looks promising. Downloading now. I just hope its not too customized like other distros. Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-989010 Share on other sites More sharing options...
issachar Posted December 5, 2008 Share Posted December 5, 2008 Hi Anyone in Cape Town, South Africa have this download? If you live in SA, you'll know why I ask. Bandwith seriously expensive and I only have mobile Vodafone connection (even more expensive) ;-) Pls PM or mail me at charl.bronn at gmail dot com Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-989023 Share on other sites More sharing options...
JaE-V Posted December 5, 2008 Share Posted December 5, 2008 If anyone has rapidshare mirror send me a PM please, thanks guys Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-989165 Share on other sites More sharing options...
fireedo Posted December 5, 2008 Share Posted December 5, 2008 JaE-V Check your PM Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-989181 Share on other sites More sharing options...
macguy13 Posted December 6, 2008 Share Posted December 6, 2008 I have the iAtkos 5i DVD that I torrented. When I try to boot it, it gives me this error message: System Config file '/com.apple.boot.S/Library/Preferences/SystemConfiguration/com.apple.Boot.plist' not found I tried a new DVD, and I tried redownloading the torrent file. Does anyone know why this is happening, and how I can make it work? Link to comment https://www.insanelymac.com/forum/topic/138929-iatkos-5i-1055-intel-dvd/page/4/#findComment-989341 Share on other sites More sharing options...
Recommended Posts