Jump to content

iDeneb v1.3 10.5.5 Released!

Jack Layne

By Jack Layne,
in New Releases and Updates

 Share
593 posts in this topic

Recommended Posts

caseyh
caseyh
Posted
Posted
You need to set your OSX partition as bootable. Try burning a gparted cd (http://gparted.sourceforge.net/) and using it to set the boot flag.

 

did as you said here, when gparted gets to the graphical part, it doesnt display properly and is useless, i have tried to get it to run other modes with no luck, do i have to hook it via VGA? i am running dvi normally. thanks!

ile.
ile.
Posted
Posted
My experience with the GA950 video is that it is slow, not much you can do about it outside of geting a better graphics card, you can get an Gefore 8600GT 512 for under $75

 

I ended up sticking some tin foil into the processor and now it's faster :thumbsup_anim:

 

(sorry if this is getting off topic)

~)PhI~
~)PhI~
Posted
Posted
hi, i have problems with this version. kalyway 10.5.2 works fine for me, but ideneb gives me this problem and cannot boot for the first time after installation on my p5w dh deluxe.

mdworker[82] (Error) SyncInfo: Boot-cache avoidance timed out!

 

can anyone lend a hand?

 

Did you look at the bios settings (found on the Asus P5W DH thread here: http://forum.insanelymac.com/index.php?showtopic=68453) Around page 6 I believe.

 

I can boot without problems on my P5W DH. I was getting a reboot loop before I switched one of the parameters in the CPU page in the bios to "Enable", i can't remember atm the exact name.

 

Worth a look to compare bios screens.

docfunk
docfunk
Posted
Posted

i got no dvd roms since i reinstalled to 10.5.5.

i was having the same problem with 10.5.4 and also had network problems,

could not see any windows computer and the windows computers couldn't see the mac unless i brows

to the ip \\192.168.0.3 etc. its ok in 10.5.5.

 

back to the dvd rom problem. i know both work because i was able to install the os.. but once in osx, it wont see any cd that i add in both of my dvd roms.

 

i have tested by swapping my lg dvd burner with a old lg cd rom and nothing works..

 

other then that everything seems to be working.

 

Dell XPS Gen 3

Intel P4 3.2GHz HT

Intel 925X Based Motherboard

3Gig's of ram

XFX GeForce 7900 GS 256 MB DDR3

Sound Blaster Live 24 External

badman
badman
Posted
Posted

i have the same problem my friend.i try 100 time. ideneb and jas osx 10.5.4 server i did not got any success.i have p4 3.2, 4gb memory ich7 .today i got success with ideneb 10.5.5, jas 10.5.4 server.i bought usb sata enclosure.sorry my english not very good........tookout all my sata disk from computer.i connect only usb sata hd then install every thing. change some kext, repair disk permission.then put back ur hd in ur computer.everything cool

 

copy this kext into extentions

repair disk permmision

pic.tiff

AppleAHCIPort.kext.zip

IOAHCIFamily.kext.zip

IOATAFamily.kext.zip

JMicronATA.kext.zip

ShadowBandit
ShadowBandit
Posted
Posted

hey whats up guys and gals, can someone point me in the right direction with this ??

 

Standard timesplicing quatum is 10000 us
Vm_page_bootstrap: 510042 free pages and 14246 wired pages
Mig_table_max_displ = 79
HTT: 1 core per package; 2 logical cpus per package
ACPI CA 20051117 [debug level=0 layer=0]
appleACPICPU: ProcessorApicId=1 LocalApicid=0 enabled
appleACPICPU: ProcessorApicId=2 LocalApicId=1 enabled
Loading security extension com.apple.nke.applicationfirewall
Loading security extension com.apple.security.seatbelt
Calling mpo_policy_init for mb
Seatbelt MACF policy initialized
Security policy loaded: seatbelt policy (mb)
Loading security extension com.apple.security.TMSafetyNet
Calling mpo_policy_init for TMSafetyNet
Security plicy loaded: safety net for time machine (TMSafetyNet)
Copyright © 1982, 1986, 1991, 1993
The regents of the university of California. All rights reserved.

MAC Framework successfully initialized 
Using 10485 buffer headers and 4096 cluster IO buffer headers
IOAPIC: version 0x20 Vectors 0:23
ACPI: System State [s0 s3 s4 s5] (s3)
Extension ‘com.apple.driver.applePCIconfigurator’ has immediate depndencies on both com.apple.kernel and com.apple.kpi components; use only style.
Mbinit: done
Security auditing service present
bSM auditing present
From path: “uuid”,
Waiting for boot volume with UUID 804603d3-83e9-36b8-ab8e-11501d1805d6
Waiting on <dict ID=”0”>IOProviderClass</Key><string ID=”1”>IOResources</sting><key>IOresource
Match</key><string ID=”2”>boot-uuid-media</string></dict>

 

It gets to here and then everything stop, dvd rom is no longer spinning and the HDD is no longer doing anything.

 

I am running the dvd from an external drive and here are my specs:

asus n10j: Atom N270 1.6ghz(sse2, sse3, ssse3, mmx, HT)

chipset: 945GSE and ICH7-M

Video: 950GM and switchable to nvidia 9300

 

Thanks in advance.

Pilgrimage
Pilgrimage
Posted
Posted

Wow, great release! Everything worked out of the box except for one little problem:

 

When I use my backup disk for Time Machine, I get the following error: "The backup volume could not be mounted." Weird because this disk worked perfect on my Kalyway 10.5.2 install. Anyone encountered a familiar problem?

 

Thanks!

Pilgrimage
Pilgrimage
Posted
Posted
Hi,

 

i downloaded & burned to dvd,

 

boot from DVD starts out fine, but when i get to the dark brown screen (just after the booting apple screen) it shuts down, not crashes but shuts down,

 

ASRock MOBO Core2Duo E6750,

 

any tips?

 

Thanks in advance

 

Is the DVD correctly burned? (burning speed less then 4x) Did you do data verification on the burned disk?

 

Got the same problem 2 days ago and solved it by double checking MD5 number / burning at slow speed on a Windows PC.

raidensix
raidensix
Posted
Posted
did as you said here, when gparted gets to the graphical part, it doesnt display properly and is useless, i have tried to get it to run other modes with no luck, do i have to hook it via VGA? i am running dvi normally. thanks!

 

I was using VGA when I used it so you can give that a shot. What kind of gfx card are you using ? If you know someone who has partition magic, that will also do the job. I think they let you download a demo but you'll need an XP installation to use it.

 

You can also google "Hiren's boot cd" which is a compilation of partition tools.

bobbylx
bobbylx
Posted
Posted

Thanks for this release. Worked great with a few exceptions. I had to manually install audio and network drivers. Other than that, perfect. Time machine works flawlessly to my backup disk, all graphics options work and dual display.

 

FYI, if anyone is using a similar system. It's an HP XW4300 workstation. It has Intel P4 3.2GHz CPU, 2 x 250GB Maxtor IDE drives, 1 LiteOn IDE DVD drive, and Nvidia Quadro NVS265 Graphics.

Audio is RealTek HD ACL260, I found some help here on insanelymac on how to fix the AppleHDA kext.

Ethernet is Broadcom Xtreme Gigabit card, 5751, found the kexts here as well.

adois
adois
Posted
Posted

Ok, great, but I have a problem.

 

I can successfully boot the install DVD. Well, that's pretty much all I can do, because I can't mount any drives in Disk Utility. If I try to format my fat32 partition to HFS+, it doesn't do anything. I can't mount any of my partitions. It recognizes all my partitions correctly, though.

 

I have Abit Socket 939 motherboard (I don't remember the exact model) with Athlon 64 3500+ and nForce chipset. Applied the nForce patch and verified the burn and md5 hash.

 

Halp?

 

EDIT: Forgot to mention that I have 2 hard drives, IDE and SATA. Can't mount from either

EDIT2: Ugh, do not try to edit posts without JavaScript.

factory
factory
Posted
Posted

Hi,

I've installed in my AMD machine. My config is:

Motherboard K9AGM3-FIH (chipset SB600)

SATA Harddrive

SATA DVD-RW

IDE DVD-RW

 

Everything goes well since I want to use the IDE DVD-RW.

It doesn't appear on System Profile.

 

Could you tell me if the kext's for SB chipset support IDE in SB600?

 

Thanks in advance and nice work! also the design of the distro! ;)

Lihto
Lihto
Posted
Posted

My configuration

Abit X38 QUAD GT

Q6600

6gb DDR2

500Gb Seagate SATA2

HD3870

Samsung DVD RW- SATA

I have try to install this distribution and when the files are copied and PC tells me to restart I restart it and I want to boot from HDD and it boots to screen where is MAC and it gives me the sign of restriction parking place...I have selected right kext but it won't work...Does someone knows how to solve this?

 Share
Go to topic listing
×
×
  • Create New...