InteliMac Pro Posted May 7, 2008 Share Posted May 7, 2008 I... LOVE... YOU... Finally have audio working on my Abit IP35Pro. Everything's working like a charm except sleep. I installed with the sleep kernel, but it won't wake. The computer seems to wake, but the screen, keyboard, and mouse are MIA. I'm running a Q6600, 4 gigs of ram at 800mhz, sata hdd and dvd, and a Geforce 8600 256 with the aforementioned mobo. Anybody know if this is a kext thing or a bios thing? Link to comment Share on other sites More sharing options...
bobmavric Posted May 7, 2008 Share Posted May 7, 2008 somebody help please. I have GeForce nVIDIA problem too. everything works fine. (Ofcourse I had to install Audio from another package but it works now) But my nVIDIA 7900 does not workd. it has only 1024X768 resulotion. Will somebody help please. Thanks. P/S I must add something elese guys. In system profiler, my nvidia card is detected but i don't know why I have a 1024 resulotion and fan speed is high. MoBo: Gigabyte GA-965P-DS3 Audio: ALC883 5.1 Ethernet: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller Graphic: nVIDIA GeForce 7900 GT-GTO Chipset: Intel ICH7 CPU: Intel Core 2 Duo 6300 1.86 GHz Link to comment Share on other sites More sharing options...
aed0101 Posted May 7, 2008 Share Posted May 7, 2008 Everything is working fine with that release, the only problem is the time it takes to boot into Leopard. It takes 44-45 seconds, while with Kalyway it takes 23-24 seconds. It freezes for about 20 seconds at the end of the boot (not a blue screen). I attach a system.log part. Tried to remove wireless card and disable LAN, but it does not help. Removing Firewire does not make any important speedup. Specs are: Core 2 Duo e6420@3,0GHz GigaByte G33M-DS2R motherboard 2GB System Memory Western Digital SATA HDD and Pioneer SATA DVD ATI HD2600XT 256MB Thanks in advance. systemlog.rtf Link to comment Share on other sites More sharing options...
eddie11c Posted May 7, 2008 Share Posted May 7, 2008 It would appear this issue is from you network card by looking at the log. Its trying to connect to the apple servers but unable to resolve. Link to comment Share on other sites More sharing options...
Jack's_Sparrow Posted May 9, 2008 Share Posted May 9, 2008 An update here....after my FANTASTIC ethernet card startted working ....the @#!#*^%# machine wont boot up anymore.....I tried reinstalling ...and it works only if I have not installed my network drivers ...otherwise ...it would just hang during boot after "clearing CS_VALID" step or sometimes "loading mDNSResponder" or even at "Login service (or something like that) starting...started" I guess its a problem with the ViaRihne drivers... Link to comment Share on other sites More sharing options...
Detosx Posted May 9, 2008 Share Posted May 9, 2008 Hi there, I am still unable to find a solution to the ACPIPS2Nub problem I have had - boot up freezes or on some bootups the keyboard doesn't work. The two points where bootup freezes refer to ACPIPS2Nub and to ACPIPlatform. My options in terms of trying other ACPIPlatform(s) are limited because I need speedstep, which requiresas this requires version 1.1.0. Has anyone found a workaround to problems they were having with ACPIPS2Nub/ACPIPlatform or know of any useful links that I might have missed? Many thanks. Link to comment Share on other sites More sharing options...
geforced Posted May 10, 2008 Share Posted May 10, 2008 hey something strange happened when i updated to win xp pro sp3, this is the setup 1pc p5k deluxe mod -- 2 hard-drives sata250gb for multi boot windows os and 1 20gb hard-drive for mac os x this 1 le4rallv3, so here is wat happened when i pressed f8 on my keyboard to choose that 250gb hard-drive to boot into windows, so bla bla bla booted and updated from sp2 to sp3 did the restart and all was fine then restarted to boot in to my osx os and it boots but when it gets to the login screen something crazy happens it shows the mouse for like 1.5 seconds and then it goes on -v mode and it loops for ever, this is almost impossible to solve i had to reinstall, fixed permissions u name it it just dint work had to reinstall, so if you have a similar setup from mines remember to disconnect the osx hard drive first before updating to sp3.... hope this helps Link to comment Share on other sites More sharing options...
geforced Posted May 10, 2008 Share Posted May 10, 2008 hey something strange happened when i updated to win xp pro sp3, this is the setup 1pc p5k deluxe mod -- 2 hard-drives sata250gb for multi boot windows os and 1 20gb hard-drive for mac os x this 1 le4rallv3, so here is wat happened when i pressed f8 on my keyboard to choose that 250gb hard-drive to boot into windows, so bla bla bla booted and updated from sp2 to sp3 did the restart and all was fine then restarted to boot in to my osx os and it boots but when it gets to the login screen something crazy happens it shows the mouse for like 1.5 seconds and then it goes on -v mode and it loops for ever, this is almost impossible to solve i had to reinstall, fixed permissions u name it it just dint work had to reinstall, so if you have a similar setup from mines remember to disconnect the osx hard drive first before updating to sp3.... hope this helps Link to comment Share on other sites More sharing options...
osx psychodude Posted May 10, 2008 Share Posted May 10, 2008 hi first of all thanks to eddie for this wonderful release i have a few glitches which i'd like to sort out i have a lenovo 3000 y300 on which i installed leo4allv3 i chose azaliaaudio the sound works fine but the mic doesnt work it says no input device found then there is the integrated camera i installed macam but it doesnt work nor does the wireless( intel 3945abg) but my lan is perfect so anyone can help?? i'll be really grateful Link to comment Share on other sites More sharing options...
zybercynic Posted May 10, 2008 Share Posted May 10, 2008 I reinstalled Leo4AllV3 on my Dell Dimension 8400 after installing 2gb of ram, 160gb sata drive, and a new network card. Audigy sound card removed and Broadcom onboard nic disabled. Seamless install (thanks Eddie) everything recognized without further patching. Startech USB sound device - works brilliantly - $11.99 from Newegg - recognised immediately. Network card - Encore ENL832-TX-RENT $7.99 from Newegg loaded in install - no problems. The onboard x300 video will only display 1024x768 - anyone have a workaround? Occasionally goes into some form of loop, particularly when starting up Entourage - Microsoft problem, or other? Other than the above, works well, reasonably fast. Link to comment Share on other sites More sharing options...
breakingbad Posted May 10, 2008 Share Posted May 10, 2008 Hi. I´d like to know where can I download the Leo4all V3, because this version is the only one who seems to work for my rig, because I tried Kalyway, iATKOS unpatched and patched versions without any success. So, I hope you could provide me a link so I can download the newest version of Leo4all. THNX folks. [ ]´s Link to comment Share on other sites More sharing options...
Yukimo Posted May 10, 2008 Share Posted May 10, 2008 Anyone successfully install this on Abit IP35 Pro with latest Vanilla Kernel? Most importantly, does Restart, Shutdown work? I try Kalyway before with Vanilla Kernel but Restart and Shutdown doesn't work. Link to comment Share on other sites More sharing options...
Skyper Posted May 11, 2008 Share Posted May 11, 2008 Eddie , Geforce kext locks up the computer on your release and i cant have QE/CI .. Can you help me? Link to comment Share on other sites More sharing options...
InteliMac Pro Posted May 12, 2008 Share Posted May 12, 2008 Anyone successfully install this on Abit IP35 Pro with latest Vanilla Kernel? Most importantly, does Restart, Shutdown work? I try Kalyway before with Vanilla Kernel but Restart and Shutdown doesn't work. Yes I installed it just fine on my IP35 Pro. Even have audio working finally. However, to my knowledge, Shutdown and sleep don't work with the Vanilla kernel on hacks. You have to use the sleep kernel. I originally used Vanilla with the Kalyway 10.5.2 release and shutdown would hang, but restart worked. After changing to the sleep kernel Shutdown worked fine, but for some reason my monitor, keyboard and mouse wouldn't turn on when i'd try to wake from sleep. I'm not sure if the speedstep kernel allows shutdown to work, but i'm trying it a little later. Link to comment Share on other sites More sharing options...
InteliMac Pro Posted May 12, 2008 Share Posted May 12, 2008 Ok. I replaced the 8600 GT with an 8800 GS and now i can't boot. I reinstalled a couple times but it keeps hanging during startup. I don't know if the card is the issue but here's where it freezes. Any thoughts? Well it's definitely something to do with the card. When i swap it out for the 8600 it boots into OSX no problem. EDIT: Well i tried reinstalling with NO graphics drivers and it let me boot. Once i got to the desktop i repaired permissions, downloaded NVInstaller .41 and installed the vanilla 256. Then i repaired permissions and rebooted and it WORKED! In system profiler it shows full CI/QE supported and even shows the correct VRAM of 384 mb. The drivers must have been causing a conflict for some reason. Oh well. ME = Link to comment Share on other sites More sharing options...
Yukimo Posted May 12, 2008 Share Posted May 12, 2008 IntelliMac, Thanks for the reply! Am I missing anything out by using Sleep Kernel instead of Apple Vanillia Kernel? I notice Apple Update wouldn't work or certein Applications installer say it damage and wouldn't install with different type of Kernel. I have a question for you installing Kalyway 10.5.2, what option did you choose to get restart to work with Vanillia Kernel? Restart doesn't even work for me, it restart my PC but my PC is still on. Shutdown seam to work after I updated it with Apple Leopard Graphic Update. Anyway, I did give this a shot, it boot the DVD just fine, went through the Installation and booted to Leopard for the first time. I'm getting a bunch of texts scrolling through the screen rapidly, is this normal? Then I get a "Still waiting for root device..." GRrr...So I went into Bios and set IDE Controller to AHCI and now it boot in but I'm getting a Blank Black Screen but no graphic at all, I can hear the sound and the Leopard introduction playing in the background. I try all different type of install customization but no luck. I went back to Kalyway 10.5.2, it's the only one that work for me so far. I don't have a lot of lucks getting Leopard to work on my PC at all. That's great if you get this one to work though, because I want my Q6600 to say Intel Core 2 Quad 2.4Ghz instead of 2.4Ghz Unknown Processor like on Kalyway. Link to comment Share on other sites More sharing options...
InteliMac Pro Posted May 12, 2008 Share Posted May 12, 2008 well I'll detail the options I chose for the install and you can try to mirror that. I'm assuming you have an nvidia graphics card. The setting I chose are: Kernel - I used the default 9.2.0 kernel, which is the speedstep kernel. Shutdown, restart, and display sleep all work for me. I could never get my system to wake from sleep even with the sleep kernel, and shutdown wouldn't work for me using the vanilla kernel. Mobo chipset - intel ICHx audio - ALC888 Graphics - apple 10.5.2 drivers + the NVInject for your card's VRAM size (I think you may have not checked an nvinject, which would explain the blank screen). Smbios - I put mac pro, but you can choose whichever you like. The text you see during boot is because leo4all sets OSX to boot in verbose mode. You can edit your boot plist to change this if you are satisfied that your install is trouble free. I'll post a link to the thread that details how to do this later tonight since I can't do it now on my iPhone, or maybe somebody else can do it earlier. Or you can just search around. I found in the forum for the leo4all wiki. I think that's it. Everything else I skipped and let it install the defaults. Hope this helps. Here is the link to how to restore the grey apple boot screen. Link to comment Share on other sites More sharing options...
maximus659 Posted May 13, 2008 Share Posted May 13, 2008 Does anyone know if I can use ATI 3650 card and if possible which driver should I use? Thanks for all the hard work Link to comment Share on other sites More sharing options...
ralphy_mac Posted May 13, 2008 Share Posted May 13, 2008 can i ask you? i need to start a forum post , cant figure out how. i have a dell latitude c6xx something. tried to install from a kalyway 10.5.1 disk and it says starting x.86 darwin, takes about 5 min, then it starts over. any idea what im doing wrong? --thx, --ra2 well I'll detail the options I chose for the install and you can try to mirror that. I'm assuming you have an nvidia graphics card. The setting I chose are: Kernel - I used the default 9.2.0 kernel, which is the speedstep kernel. Shutdown, restart, and display sleep all work for me. I could never get my system to wake from sleep even with the sleep kernel, and shutdown wouldn't work for me using the vanilla kernel. Mobo chipset - intel ICHx audio - ALC888 Graphics - apple 10.5.2 drivers + the NVInject for your card's VRAM size (I think you may have not checked an nvinject, which would explain the blank screen). Smbios - I put mac pro, but you can choose whichever you like. The text you see during boot is because leo4all sets OSX to boot in verbose mode. You can edit your boot plist to change this if you are satisfied that your install is trouble free. I'll post a link to the thread that details how to do this later tonight since I can't do it now on my iPhone, or maybe somebody else can do it earlier. Or you can just search around. I found in the forum for the leo4all wiki. I think that's it. Everything else I skipped and let it install the defaults. Hope this helps. Link to comment Share on other sites More sharing options...
Skyper Posted May 13, 2008 Share Posted May 13, 2008 Eddie , Geforce kext locks up the computer on your release and i cant have QE/CI .. Can you help me? ANYONE?! Link to comment Share on other sites More sharing options...
saneboy Posted May 13, 2008 Share Posted May 13, 2008 I just installed Leo4Allv3 on my new laptop (Compaq Presario A938CA). EVERYTHING worked out of the box. (Video, Audio, Nic, Wifi). I selected Azilla audio, x3100 graphics driver, 9.2 vanilla kernal and power management. The only issue I have is after the power management turns the LCD off, when it comes back on, it appears to be missing about half of the columns of pixels in the video. Anyone else have this problem? S Link to comment Share on other sites More sharing options...
eddie11c Posted May 13, 2008 Share Posted May 13, 2008 You issues with video with power management are most likely caused by the X3100 drivers. You are the first that has commented on it though, maybe someone else with the a similar setup can elaborate. Link to comment Share on other sites More sharing options...
Asraiil Posted May 14, 2008 Share Posted May 14, 2008 Hey guys, just installed Leo4Allv3 on my homebuilt HTPC. So far everything works great with only minor adjustments needing to be made. Here's my specs AMD x2 4600+ 10.5.2 is installed on a USB IDE drive ASUS M2R32-MVP (Onboard LAN is unworking ATM, but the onboard audio works using the Azalia kexts) Sapphire 3870 D-Link DWA 5 something or other (This was recognized out of the box as an Airport Extreme it's an "N" card) I have the whole system connected to my Onkyo SR-674, I had to download SwitchResX to get the resolution just right on my HDTV, but hey, it works. One question, I'm having a phenom x4 9550 delivered in a few days, does anyone think that's going to break the system? I mostly use Windows anyways due to the lack of Blu-Ray and HD-DVD playback in Leopard, but I like giving it a try! Link to comment Share on other sites More sharing options...
ziggster Posted May 15, 2008 Share Posted May 15, 2008 Hi i'm really bad with this stuff so i need help. I recently downloaded Leo4allv3, and it came in 37 rar files. I tried to extract files to leo4all folder in WinRar (Windows) and i burned the iso image but when I run the disk i get to the install part and it says that the install failed because it was missing the files the install needs. Someone please help me! :pirate2: Specs: Toshiba Satellite a215 AMD Turion 64x2 2.0 GHz 2 GB DDR2 Ram ATI Radeon X1200 Atheros AR5007EG Wireless Network Adapter Thanks in advance. Link to comment Share on other sites More sharing options...
Skyper Posted May 15, 2008 Share Posted May 15, 2008 Whats wrong with u people , r u going to actually even bother to read my post? Eddie at least you help me .. you made Leo4all Link to comment Share on other sites More sharing options...
Recommended Posts