802 replies to this topic

[droidmac]

I haven't seen a fan fix anywhere.    It probably has something to do with the 4pin fan connecter..  but I don't know...  I would love a fan fix for the X1950XTX!

Bettarg, on Oct 26 2008, 11:08 AM, said:

Hello,

is there any Progress in the Fan Speed Problem with a X1950XTX ?

Bye

Dirk

[billkilgore]

thenk u jccool.  
I hope someone come up with a fan speed fix.

[lagus]

Hello.
Im banging my head against the table now...
I have tried all different solutions ( I think) but still have no QE or QE2D.

Closest I get is with Jccool method injector.
Then the system runs at 1650*1050@60hz on Dual DVI
But no QE och QE2D.

my system:

Mobo: Abit KN8-Ultra (chip:AppleNForceATA Test, Sound: ALC850)
 Processor: AMD X2 3800+
 Video: ATI X1900 GT (id 0x724b)
 Build: iDeneb v1.3 10.5.5
 Core: 9.4.0 StageXNU
 AMD Patch

Is it possible to solve this with 10.5.5, is this the place for answers?
If not please direct me.
Thank you very much for any help.
/Lagus

[-SoniC-]

Hello, I have a ati x1800 series. Can this target works with this method?


Help! (sorry for my bab english)

Attached Files

•  Esquema.jpg   80.7K   78 downloads

[apreichner]

After attempting to use the x1900xt EFI installer on 10.5.6 I received this error.





The x1950 AIO installer worked perfectly except restart/shutdown stopped working. Screen would turn off, but the computer stayed on. Worked normally until I tried the driver.

My specs:

ASUS P5Q Pro
Leopard Retail Vanilla (MBR install)
ASUS x1900xt PCI-E

[weaksauce12]

Update: Fixed - did a fresh install, my old drivers were conflicting.

I used the X1900XT EFI VGA Installer (7249) located here:

http://www.mediafire.com/?ljnje5fjjbz

It boots and works, but no QE/CI (QE = Not Supported, CI = Software).  Is there an updated driver or trick to getting full QE/CI support?

[jccool]

Hello Everyone

Please don't forget to donate if it works for you,

Thanks,

Jccool

[theDeviL]

i have 2 x1900xt cards and the AIO installer seems to work half way but I get to the part right before the login, my screen stays blue... any ideas?

[skullmonkey]

Is there post with step-by-step what should I do and which kext/pkg/files should I start first, second, third. ? I have Asus x1950xt on P45 with iDeneb 10.5.6.

Thanks.

[suidar]

Hello everyone!
Sorry for my bad english.
I have a x1950Xt Ati Vga card on my desktop Asus P5q based. I trying Idneb v. 1.5 (10.5.7) and my vga don't work fine. How to install step by step the drivers? I am new, please help me.
Thanks!

[----]

suidar,

If you have a fresh install of 10.5.7, you can do the modifications on the stock drivers yourself:

1. Go to /System/Library/Extensions/
2. Show contents for the ATIRadeon.kext
3. edit the Contents/Info.plist with a text editor:
4. Find the <key>IOPCIMatch</key> and replace the contents of the <string> following it with this:

			<string>0x72441002</string>

5. Do the same in the ATIRadeonX1000.kext/Contents/Info.plist
6. Edit ATIRadeonX1000GA.plugin/Contents/Info.plist, replacing the corresponding block with this:

	<key>CFPlugInFactories</key>
	<dict>
		<key>10027244-0000-0000-0000-000a27898d3e</key>
		<string>ATIRadeonX1000GAFactory</string>
	</dict>
	<key>CFPlugInTypes</key>
	<dict>
		<key>ACCF0000-0000-0000-0000-000a2789904e</key>
		<array>
			<string>10027244-0000-0000-0000-000a27898d3e</string>
		</array>
	</dict>

7. Fix the permissions with Disk Utility or OSx86Tools.

After reboot you should have hardware accelerated graphics(hinted by a gfx card's fan revving up on boot) with a single display mode available. If you already have Natit.kext installed, you'll see all the modes available for your display.

I've tested this on a fresh install of iAtkos v7. Works like a charm on my Sapphire 1950XT 256Mb.

P.S. I was unable to get the drivers working after upgrading to 10.5.8, has anyone succeeded in that?

[Diabloproductions]

Hi Does this work with osx 10.5.8?

[noobhaxor]

Does anyone have the AIO Installer Link or a place for me to download it?... All JCCOOL's links are broken.

I'm running a X1950 XT ATi Graphics card in JaS 10.4.8 Mac OS.

Thank you for the help

[xtort]

If anyone finds the links and/or files let me know. I will host the files for JcCool.

noobhaxor, on Nov 11 2009, 02:46 AM, said:

Does anyone have the AIO Installer Link or a place for me to download it?... All JCCOOL's links are broken.

I'm running a X1950 XT ATi Graphics card in JaS 10.4.8 Mac OS.

Thank you for the help

[bobross]

Are there any x1900/x1950 drivers for 10.6.2?

[mr_christer]

vahan: i tried you suggestions in 10.5.8 (i have a sapphire x1950xt 512mb) without success. maybe it just works in 10.5.7

atm i'm trying to get 10.5.8 working with emptyskull's 10.5.6 drivers

update: got it working!
sapphire x1950xt 512mb with 10.5.6 drivers in 10.5.8

[bobross]

I just went though 40 pages of this thread and EVERY    file link is dead.  Can anyone point me to some help getting my x1950 Pro working under Snow?

Thanks,
BR

[jccool]

bobross, on Feb 19 2010, 09:51 AM, said:

I just went though 40 pages of this thread and EVERY  fu*king  file link is dead.  Can anyone point me to some help getting my x1950 Pro working under Snow?

Thanks,
BR

Unfortunately support for this set of cards has ceased. It is not currently possible and probably will never be possible for these cards to run in SL because Apple no longer provides support for them therefore my method will no longer work.

[zinge]

So there is no way to get a x1950xt working under SL? That really sucks... I finally got everything else on my system working (took me forever to get sound), and graphics kinda sorta work. I can't use both monitors, only 1. I have translucent menu bar and such, but still get artifacts, and if I try to play any video (in quicktime/vlc/fcp/etc), as soon as the video plays, the screen goes crazy, and I have to restart to get it back. Any ideas at all?

jccool, on Mar 5 2010, 12:27 PM, said:

Unfortunately support for this set of cards has ceased. It is not currently possible and probably will never be possible for these cards to run in SL because Apple no longer provides support for them therefore my method will no longer work.

[typo]

I'm stuck with a sapphire X1900XTX (Device ID 7249, Producer ID 1002). Has anyone got a hint for me how to get it to support different resolution than 1024x728 and QE enabled under Snow Leopard (10.6.3)?

Tried A LOT but nothing worked so far...

S.M.S. (save my soul...) pls.