2442 replies to this topic

[Sinetek]

Delete /System/Library/Extensions/AppleGraphicsPowerManagement.kext

Bitcore, on 21 January 2013 - 01:49 PM, said:

Sinetek , could you please tell me why your " AMD test 1" kernel works so good on fx?

Bitcore

Not sure, I don't remember what is special about this kernel :/   Not much I think it's like the others. You can try -nossse3bit perhaps or -nosse42bit  with AnV's rehash of the kernel?

[Bitcore]

Sinetek, on 21 January 2013 - 02:02 PM, said:

Delete /System/Library/Extensions/AppleGraphicsPowerManagement.kext


Not sure, I don't remember what is special about this kernel :/   Not much I think it's like the others. You can try -nossse3bit perhaps or -nosse42bit  with AnV's rehash of the kernel?

too bad ;s nope that doesn't work.
I got anv's kernel working by setting some cpu settings in my BIOS.
So maybe you made it enable some special feature?

Thanks, Bitcore

[Bronya]

Sinetek, on 21 January 2013 - 01:47 PM, said:

Ah yeah good point there Bronya, you remind me of something that could be tried.. You know, maybe the nVidia drivers (and ATI too..) work a bit better under x86_32 mode.
Let's dig up the ML DP1 again, see where that goes.


-- Sinetek

Yes ! But i have qe/ci ! But in single user one problem - it is no correct keyboard . Maybe no correct xnu with opemu ... One problem - if xnu with emu ssse3 , then no correct work sse3 or sse2 or sse or mmx and etc ...
Therefore  to be write  correct xnu_src.

--Bronzovka

[Sinetek]

Bronya, on 21 January 2013 - 02:26 PM, said:

Yes ! But i have qe/ci ! But in single user one problem - it is no correct keyboard . Maybe no correct xnu with opemu ... One problem - if xnu with emu ssse3 , then no correct work sse3 or sse2 or sse or mmx and etc ...
Therefore  to be write  correct xnu_src.

--Bronzovka

what GPU? for keyboard you need a kext.
spasiba

[Bronya]

Sinetek, on 21 January 2013 - 02:28 PM, said:

what GPU? for keyboard you need a kext.
spasiba

No.  I have keyboard apple !
If I press the button, the screen shows something else ...
Because without sse4_2 and etc ...
Maybe opemu - it is conflict with sse3 or another ....

[theconnactic]

Hi, Bronzovka!

I just read you got QE/CI with mountain Lion, right? Is it 10.8.2? Which kernel did you use for it? More important yet, which GPU do you use?

About your keyboard issues, can you upload a picture of what's going on when you press the button?

Best regards and welcome on board!

[Bronya]

theconnactic, on 21 January 2013 - 03:21 PM, said:

Hi, Bronzovka!

I just read you got QE/CI with mountain Lion, right? Is it 10.8.2? Which kernel did you use for it? More important yet, which GPU do you use?

About your keyboard issues, can you upload a picture of what's going on when you press the button?

Best regards and welcome on board!

Hi theconnactic!
Yes ! QE/CI for 10.7.5 and 10.8.2 ! But in 10.8.2 problem maybe GPU , because i no know for GPU. ))))
Soon picture for keyboard ! It is problem on 10.7.4 .  One problem - it is  no correct xnu ...
I new wrote xnu_src my ! Now work keyboard normal ! But problem it to in gui and panic "panic_trap" ...

[spakk]

Sinetek, on 21 January 2013 - 12:18 AM, said:

Heya, my bad, I got busy. I'm still looking for a job in Germany for this summer. Well, this indicates the opemu is doing something wrong.
When does the KP occur?

-- Sinetek

The problem occurs most frequently when I open programs and tools on such. TextEdit, Disk Utility, sometimes when I opening safari or when I want to open the terminal.

[Tyler Worth]

I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install

[spakk]

Hello and welcome bronzovka!!
please, can you upload your modified drivers here?
What Graphic card do you have?

[Bronya]

spakk, on 21 January 2013 - 07:38 PM, said:

Hello and welcome bronzovka!!
please, can you upload your modified drivers here?
What Graphic card do you have?

Hi , spakk !
I have atiradeon 5770 ! Add driver aty_init for this 5770 and work =)

[spakk]

Tyler Worth, on 21 January 2013 - 07:33 PM, said:

I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install

boot only with npci=0x2000 or npci=0x3000 PCIRootUID=0 or 1  -v -f
then look at where the system is hanging.
did you have taken the decrypter, and the patched dylid placed in /usr/lib/ ?
or try with the amd_kernel by Andy and remove FakeSMC and Dont steal ...kext from S/L/E

Bronya, on 21 January 2013 - 07:41 PM, said:

Hi , spakk !
I have atiradeon 5770 ! Add driver aty_init for this 5770 and work =)

bronzovka, many thanks for your quick response,  that does not help me, unfortunately, I have the Nvidia GTX 550 TI with 3 GByte

Tyler Worth, on 21 January 2013 - 07:33 PM, said:

I used Sinteks kernel on my AMD Fx-8150 and I can install it using "-v -x -f npci=0x2000 PCIRootUID=0" but when I reboot after install it will just reboot. over and over again. not sure what to do I but the same flags for installation when booting but no prevail. damn fx processor. Good news it only took 15 minutes to install

What kind of Sinetek kernel did you use?

[SS01]

Update: for the moment, chat server went back to irc.osx86.hu

if it doesn't get more stable, i might move us to SystemNet

[spakk]

SS01, on 21 January 2013 - 08:50 PM, said:

Update: for the moment, chat server went back to irc.osx86.hu

if it doesn't get more stable, i might move us to SystemNet

chat.osx86.hu: Could not connect!!

[Bitcore]

sinetek , i see you "harcoded the TLC to 18" in AMD test 1 kernel.
How can we set the "TLC" ? and what is it?
Thanks a lot!
Bitcore

[TheMentalist]

On the first install with -nossse3bit I was not getting any errors, but a fresh install even after -nossse3bit I get a ZN18xxx but the system boots up fine and no issues.

[TheMentalist]

I can install the flash player + VLC but cannot install Xcode.  

"Xcode quit Unexpectedly"  could this be due to the kernel ?

[Tyler Worth]

spakk, on 21 January 2013 - 07:57 PM, said:

boot only with npci=0x2000 or npci=0x3000 PCIRootUID=0 or 1  -v -f
then look at where the system is hanging.
did you have taken the decrypter, and the patched dylid placed in /usr/lib/ ?
or try with the amd_kernel by Andy and remove FakeSMC and Dont steal ...kext from S/L/E



bronzovka, many thanks for your quick response,  that does not help me, unfortunately, I have the Nvidia GTX 550 TI with 3 GByte



What kind of Sinetek kernel did you use?

I have not pathed or did a decrypter. I do not know how to do this haha.

[Deltac0]

Tyler Worth, on 22 January 2013 - 05:06 AM, said:

I have not pathed or did a decrypter. I do not know how to do this haha.

AnV made a new decrypter kext: AppleDecrypt.kext... I'm not sure if Spakk meant this, but you could try.
I think it's somewhere in this thread.

[Tyler Worth]

Deltac0, on 22 January 2013 - 06:14 AM, said:

AnV made a new decrypter kext: AppleDecrypt.kext... I'm not sure if Spakk meant this, but you could try.
I think it's somewhere in this thread.

Okay but If I have a Virtual box on my Laptop and I am trying to install this on my Desktop can I just use my Virtual box to move this file to my Usb Install i am using iAtkos ML on my usb. and I have gotten myself lost after reading and learning so much. im in overload.