2444 replies to this topic

[wastez]

looooool
They cant run in 32 Bit Mode because there are no i386 drivers anymore since ML.
Please don't write about it if you don't know it for sure.

[SS01]

No/unstable FX support yet. Will come later.

[MadMungo]

I have struck another problem with my mountain lion Install. May be Kernel opemu bug??

Using Sinetek "AMD Test Kernel 1" will let me install Mountain Lion and create user. But on next boot only shows a light grey screen that is slowly flashing dim then bright.

I Can not try any other Kernel as this is the only kernel that allows me to get past the instant reboot issue with Bulldozer/Piledriver CPUs.

[bongmasterdarky]

cecekpawon, on 18 January 2013 - 12:47 PM, said:

With latest Andy's kernel (md5: 6B38618FAFAB92588C6768DD13DFF3AD) & my old Athlon X2 3800, smooth installation iatkos ML2. But always KP (opemu...)10 seconds after login

I am also using andys latest kernel and have managed to boot and install mountain lion my graphics are detected but its really slow, i installed from a app store copy of ML and made usb stick i then replaced the kernel for andys one and was able to boot the installer and install no problems, i then popped the hd in a caddy connected it to my macbook and installed chameleon and the kernel that way wacked it back in the system and bang she loaded

only down side is boot takes around 5mins and graphics are really slow and laggy some times the system locks up all together

Amd athlon 64 X2 3800+
Msi K9N6SGM-V motherboard

ati graphics card 48 somthing

mountain lion 10.8.0

kexts used fake smc and NforceATA

looking forward to what could come next :-)

[Deltac0]

iProCr4ftr, on 18 January 2013 - 07:39 PM, said:

I am relatively new to the community, I apologise if this is a simple question.

I have a motherboard (ASUS M4N68TM_LE_V2), which has the nForce 630a chipset. However, there is no AHCI mode, only the default (IDE) and RAID. Is there a kext or a workaround which I can use to get my motherboard working with Mountain Lion? First, it shows "com.apple.applefscompressiontypezlib load succeeded" then hangs for a few seconds, and goes to "Still waiting for root device".

I have tried it using -x and a few other boot flags, but I still can't get it to work.

Thanks

This one was at page 42:

theconnactic, on 11 December 2012 - 08:10 PM, said:

RAID usually implies AHCI, so you should chose RAID.

[bongmasterdarky]

I had the waiting for root device problem first time i tired to get the system to boot i just use the NforceATA.kext that verdant posted with his support files worked a treat for me

[chokoboster]

confirm working here with QE/CI enable

AMD X6 1055T

Asrock 970 extreme4

HD 4850

M-Audio Revolution 7.1

4 GB ram

TP link WN881ND

PCI-e USB 3.0 card NEC chipset

all hardware working well

the only problem is when I play movie with quicktime, the audio and video is not sync, but when I play it on movist or VLC it sync, and no problem at all

and the performance of the processor is not good when I compare with AMD Snow Leo 64 bit or win 8 64 bit

Win 8 64 bit

[theconnactic]

Please post in the topic AMD Working Builds. Congrats!

[Diazz72]

OK man chill out,i did not know that they remove i386 in ML,so what. . .

[cecekpawon]

bongmasterdarky, on 18 January 2013 - 11:06 PM, said:

Amd athlon 64 X2 3800+
Msi K9N6SGM-V motherboard

ati graphics card 48 somthing

mountain lion 10.8.0

kexts used fake smc and NforceATA

Finally boot with kernel (8F8E8B639E2CFB37293EDE5A34458B49) & boot args "-v -f" only, no KP at all, after testing all andys attachment

In my case since ML no longger support for my old ATI graphic card (x1300), at "about this mac" / "system properties" it showing only 3MB of GPU Ram & running sloooow too. So i install kext from LION 10.7.5 & add DSDT patch. Tested with AppleDecrypt found here. Hope this help developer to take surveys

As connactic says, i'll post my results there, soon

[Deltac0]

Diazz72, on 19 January 2013 - 05:50 AM, said:

OK man chill out,i did not know that they remove i386 in ML,so what. . .

Just curious again, how did you know that "People who use mac on intel cpu and runing it in i386 mode,they do not have any problem whit this" ?
Do you know someone who runs Lion or Mountain Lion i386 on Intel?

[Deltac0]

chokoboster, on 19 January 2013 - 02:36 AM, said:

confirm working here with QE/CI enable

AMD X6 1055T

Asrock 970 extreme4

HD 4850

M-Audio Revolution 7.1

4 GB ram

TP link WN881ND

PCI-e USB 3.0 card NEC chipset

all hardware working well

the only problem is when I play movie with quicktime, the audio and video is not sync, but when I play it on movist or VLC it sync, and no problem at all

and the performance of the processor is not good when I compare with AMD Snow Leo 64 bit or win 8 64 bit

Win 8 64 bit

Congratulations! May I ask, as you're using a HD4xxxx, do you see some graphics bugs (not the QuickTime)?
Also QuickTime problem could be solved by specifying right busratio on boot (just a guess).

[iProCr4ftr]

Deltac0, on 19 January 2013 - 12:09 AM, said:

This one was at page 42:

I have tried it in both IDE and RAID mode with the nForce driver (in Verdant's support pack), and all I get is:

Found 0 units.
Still waiting for root device

[rusetsky]

iProCr4ftr, on 18 January 2013 - 07:39 PM, said:

I am relatively new to the community, I apologise if this is a simple question.

I have a motherboard (ASUS M4N68TM_LE_V2), which has the nForce 630a chipset. However, there is no AHCI mode, only the default (IDE) and RAID. Is there a kext or a workaround which I can use to get my motherboard working with Mountain Lion? First, it shows "com.apple.applefscompressiontypezlib load succeeded" then hangs for a few seconds, and goes to "Still waiting for root device".

I have tried it using -x and a few other boot flags, but I still can't get it to work.

Thanks

+1 I have the same problem (

[wastez]

rusetsky, on 19 January 2013 - 11:45 AM, said:

+1 I have the same problem (

You have to use AHCI.

[chokoboster]

Deltac0, on 19 January 2013 - 09:52 AM, said:

Congratulations! May I ask, as you're using a HD4xxxx, do you see some graphics bugs (not the QuickTime)?
Also QuickTime problem could be solved by specifying right busratio on boot (just a guess).

no, I don't have the graphics bugs
my graphics are smooth, no problem at all
my only problem is with quicktime
ok I will try your suggestion

[bongmasterdarky]

I used this kext i placed it into the extra folder on my usb key and on the hard disc. My Nforce system boots fine no problems both cd rom and hard disc are detected
i am also using the latest version of chameleon

Applenforce64 kext

Attached Files

•  AppleNForceATA.imk64bit.kext.zip   44.81K   29 downloads

[bongmasterdarky]

my specs are

Amd athlon 64 X2 3800+

Msi K9N6SGM-V motherboard

ati graphics card 5450

mountain lion 10.8.0

kexts used NforceATA

the motherboard uses nvidia

mcp61 and the nforce kext worked with it i was getting the root device error before and with out the kext no internal hard disc was detected with my retail install usb
i tired few other nforce kexts and the all gave me waiting for root device error untill i used this once, also on my bios i dont have the option achi mode only raid

[unimatrix725]

I can get X.8.2 running with "Andy's" latest amd kernel. It boots just fine, now if someone could squash those damn Nvidia driver bugs! The best I can get is safe mode, which is a little useless. This is with a 9500GT and a GTX560, but not both at the same time... lol
I will not be posting in the working builds until the nv issue is fixed since it is not a true working build. Been stressing a week over it!


Thanks to "Conti" I have figured out how to boot mountain lion with a nvidia card. Still need acceleration though!
I have noted that when opening Java 7 update11 it Kernel Panics!

Edited by unimatrix725, 19 January 2013 - 08:49 PM.

[Kaar]

Is it normal to get graphics tearing with the anv kernel? I'd been having some issues with graphics working at all, but even after I've gotten it up and running (apparently with QE/CI), there are constant graphics tearing and artifacts, especially with icons and when resizing and opening windows and the dock. It's especially bad with Safari, which straight up goes dyslexic. A few screenshots are attached.

If it helps, my system specs are:
AMD Phenom II x4 965
ASUS M4A79T Deluxe
ATI Radeon HD 5770
6GB RAM

Attached Files

•  Screen Shot 2013-01-20 at 1.24.12 AM.png   308.98K   51 downloads
•  Screen Shot 2013-01-20 at 1.23.48 AM.png   1.01MB   62 downloads
•  Screen Shot 2013-01-20 at 1.21.03 AM.png   832.22K   55 downloads