73 replies to this topic

[clubber_77]

my nvidia in 10.7.3
 Снимок экрана 2012-02-28 в 22.56.33.png   879.23K   56 downloads

mitch_de, on 28 February 2012 - 12:44 PM, said:

Update: I attached the displacement OpenCL benchmark (should work on 10.8 too)

Setting up Graphics...
----------------------------------------------------------------------
Creating Shadow FrameBuffer...
Creating Jitter Texture...
Loading Light Probe "stpeters_probe.pfm"
Error opening file stpeters_probe.pfm
Creating Light Probe Texture (0 x 0)....
displacement(293,0x7fff7c089960) malloc: *** error for object 0x108420bca: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Abort trap: 6

[mitch_de]

"Error opening file stpeters_probe.pfm"
Displaces is NOT an double click to start benchmark! Read the usage in the first post!
You must first start terminal, set working directory by cd to main folder of the bench, then start the bench in the terminal. Otherwise bench fails, because it cant find any of the needed files (.pfm,....)

[clubber_77]

mitch_de, on 28 February 2012 - 08:30 PM, said:

"Error opening file stpeters_probe.pfm"
Displaces is NOT an double click to start benchmark! Read the usage in the first post!
You must first start terminal, set working directory by cd to main folder of the bench, then start the bench in the terminal. Otherwise bench fails, because it cant find any of the needed files (.pfm,....)

ок, sorry.
now i get the next result
 Снимок экрана 2012-02-29 в 1.08.19.png   1.75MB   39 downloads
 Снимок экрана 2012-02-29 в 1.10.30.png   685.52K   33 downloads

[^Andy^]

Results with an overclocked GTX570 run from within 10.8 (screenshots attached)

Galaxies
785 gigaflops using 81920 stars,
816 gigaflops using 262144 stars

Displacement
412fps

Attached Files

•  Screen Shot 2012-03-01 at 15.11.51.png   417.88K   41 downloads
•  Screen Shot 2012-03-01 at 15.14.09.png   223.28K   46 downloads
•  Screen Shot 2012-03-01 at 15.23.29.png   1.8MB   41 downloads

[surfcaster]

81920 =423
65536 =404


Shappire HD6850 1024
i5 2400

[rominator]

New Sheriff in town

EVGA GTX580 3GB Classified Ultra at stock settings.

Will try an over clock if this gets beaten

10.7.3

Attached Files

•  Screen Shot 2012-03-01 at 4.28.15 PM.jpg   263.07K   73 downloads

[^Andy^]

rominator, on 02 March 2012 - 12:41 AM, said:

EVGA GTX580 3GB Classified Ultra at stock settings.

[mitch_de]

893 Gigaflops (81920 stars)

You can try to set even more stars (run much slower but more Gigaflops on very fast cards possible).
You used 81920 , you can try 262144 star count also. Not recommended for slow / low end gpus - may stall OpenGL output / run out of VRAM.

[Arkanis]

For me OpenCL is not working and my card is not being recognized either as an OpenCL device...

I have a Quadro 5000 and it's working pretty well OOB, tried to find the hex string to patch it under ML, but the string has changed, so I don't know where to patch the file.

[^Andy^]

Arkanis, on 02 March 2012 - 10:09 AM, said:

For me OpenCL is not working and my card is not being recognized either as an OpenCL device...

I have a Quadro 5000 and it's working pretty well OOB, tried to find the hex string to patch it under ML, but the string has changed, so I don't know where to patch the file.

I didnt have to patch anything under ML for OpenCL - it just worked (GTX570)

[eep357]

Managed to get 10 Gflops more in ML (863) vs Lion (853), GPU settings/framebuffer same on both, ML on SSD while Lion install fills more than half of 2x1TB HDs in RAID-0, and a lot more stuff running in background/startup on Lion might explain the difference.

 Mountain Lion Galaxies.png   878.93K   37 downloads  Lion Galaxies.png   696.54K   55 downloads  Screen Shot 2012-03-15 at 6.49.32 PM.png   1.6MB   44 downloads

[oSxFr33k]

Asus Gamers Laptop G74SX,  i7 2630M, 16GB samsung memory. 10.7.3 clean install.  GTX560M 3072MB

Attached Files

•  Screen Shot 2012-03-27 at 11.46.42 PM.png   552.67K   37 downloads
•  Screen Shot 2012-03-27 at 11.54.21 PM.png   998.74K   33 downloads

[shatterhenner]

hi mitch, bekomme irgendwie die Galaxis nicht zum laufen...anhand der screenshots steh rechts unten das Grafik device...bei mir nur einfach oder Multi cpus

kanns du mir helfen?!

[mitch_de]

Nun, Galaxies startet gleich im GPU Mode, also SIM: Grafikkartennamen.
Mit key s kann man in den CPU mode umschalten.
Wenn Galaxies nicht im GPU Mode startet sondern im CPU MODE, dann klappt was mit OpenCL bei dir nicht.
Funzen denn die anderen OpenCL Benches (Luxmark2 oder OpenCLWeave)?

galaxies starts up in gpu mode by default. If galaxies starts up in an cpu mode (single/multi thread) then something is wrong with the OpenCL device gpu.
Try other OpenCL Benches.

[shatterhenner]

thanx mitch, luxmark2 and openclwave is running perfectly without any problems!!!
no red lines in log!!!

[mitch_de]

PS: Have you tried to switch with key s between Cpu single / cpu multi and gpu ? What happens ? Never gpu shown as device ?

[shatterhenner]

yeah, i tried that, switching between single & multicpus is working...next switch galaxies quits unexpected!!!!
logfile is in your pm box...thanx mitch!!!

[robertx]

shatterhenner, on 16 April 2012 - 12:54 PM, said:

yeah, i tried that, switching between single & multicpus is working...next switch galaxies quits unexpected!!!!
logfile is in your pm box...thanx mitch!!!

...same problem here after updating to 10.7.3 (Zotac GT 520) doesn't load the gpu sim only gt 520 + cpu (single -multi)

[mitch_de]

Try an new BUILD compiled under 10.7 / BUILD for 10.7.
For me both BUILDS working 10.7.3 + 10.7.4 : this test build today and the other (10.7+10.8) from first page on Nvidia 9600 GT - and getting same GigaFlops (138).
Dont use command line 80K Stars! Simple start galxies without changing star cont , so it can use 65K (default)!
May even also not work on some GPUs. Dont worry, until other OpenCL Benches like Luxmark 2.0 or OpenCL_Oceanwave work on your GPU.

Attached Files

•  Galaxies_BUILD_10.7.zip   3.46MB   25 downloads

[robertx]

mitch_de, on 06 May 2012 - 09:51 AM, said:

Try an new BUILD compiled under 10.7 / BUILD for 10.7.
For me both BUILDS working 10.7.3 + 10.7.4 : this test build today and the other (10.7+10.8) from first page on Nvidia 9600 GT - and getting same GigaFlops (138).
Dont use command line 80K Stars! Simple start galxies without changing star cont , so it can use 65K (default)!
May even also not work on some GPUs. Dont worry, until other OpenCL Benches like Luxmark 2.0 or OpenCL_Oceanwave work on your GPU.

...that build also a no-go here...on 10.7.3...still runs fine on 10.7.2