21 replies to this topic

[Hexidecimal]

Has anyone tried the SL builds of VoodooHDA in Lion yet? I'm going to give it a shot shortly to get my X-Fi Titanium Fatal1ty running but was wondering if anyone else had attempted it yet.

[T.B.B.]

yeah I'm using it right now with a X-Fi card. Only one audio port is available so far.

[smartie77]

at least tow different voodohda's and prefpane combos for my alc272 work in Lion as they did in SL. Nothing to fear.

remove applehda to be on the safe side and avoid any interfering.

[rashan]

I have VoodooHDA from iAtkosS3V2 and it works good (except for the volume control knob).

[prabas]

I do have VoodooHDA from somewhere, everything is working, volume up/down, control via touch-buttons (I'll attach that kext when I'll be on Lion (30mins~)

[Derty]

i have lucky whits this.

and need delete applehda.kext or use disabler hda from maldon.

is not recognized probe add HDEF in your dsdt.

version 0.2.56

Attached Files

•  VoodooHDA.kext.zip   154.56K   674 downloads

[Iverie]

VoodooHDA 2.7.2 works for me both internal speakers and line out, had to chance the kext to make it recognize the volume controls, but everything else works, no KP's. Didn't test the microphone, I don't care.

[prabas]

Sorry for delay, had to painfully reinstall Lion.

This next works with any OS, you don't need to delete anything, install and you're ready to go.

Attached Files

•  VoodooHDA.kext.zip   80.16K   820 downloads

[Peter_sm]

prabas, on Jul 22 2011, 02:44 PM, said:

Sorry for delay, had to painfully reinstall Lion.

This next works with any OS, you don't need to delete anything, install and you're ready to go.

Is it OK to have this in E/E
//Peter

[smartie77]

Peter_sm, on Jul 22 2011, 03:30 PM, said:

Is it OK to have this in E/E
//Peter

voodoohda is for /S/L/E

[Sn1pest3r]

Why strictly VodooHDA? I used HDAEnabler and Multibeast and everything is working fine...

[bodhram]

smartie77, on Jul 21 2011, 11:25 AM, said:

at least tow different voodohda's and prefpane combos for my alc272 work in Lion as they did in SL. Nothing to fear.

remove applehda to be on the safe side and avoid any interfering.

Hi smartie,

I too have a alc272 that was working good with voodoohda 0.2.1 in SL because anything newer was creating a loopback between the mic and the speakers.

After updating to Lion I can not use this anymore because it's 32bit, and with voodohda2.7.2 I'm getting the same loopback problem

Can you please post your solution to see if I can receive some light about it?

Thanks!

[helmi1234]

bodhram, on Jul 27 2011, 08:12 AM, said:

Hi smartie,

I too have a alc272 that was working good with voodoohda 0.2.1 in SL because anything newer was creating a loopback between the mic and the speakers.

After updating to Lion I can not use this anymore because it's 32bit, and with voodohda2.7.2 I'm getting the same loopback problem

Can you please post your solution to see if I can receive some light about it?

Thanks!

Hi,

you can try this kext. It's voodooHDA 0.2.1 compiled for 64bit.

 VoodooHDA.kext.zip   161.7K   1015 downloads

It works great for me in Lion for my XFi in 64bit.  However sometimes it gives me a KP on startup. Does anyone know how to prevent these occasional KPs or alternative drivers for XFi Titanium without crackling noises?


Thanks

[r00tlolz]

I use it, only thing I can't get working is the mic. I'm going to mess around with the next and see if I can get it working.

[douggle]

I use voodoo as MultiBeast doesnt work for me i ve tried it no dice ALC888 ICH7

[Popeto]

helmi1234, on Aug 4 2011, 06:20 AM, said:

Hi,
you can try this kext. It's voodooHDA 0.2.1 compiled for 64bit.
VoodooHDA.kext.zip
It works great for me in Lion for my XFi in 64bit.  However sometimes it gives me a KP on startup. Does anyone know how to prevent these occasional KPs or alternative drivers for XFi Titanium without crackling noises?
Thanks

Hi, what is the motherboard and sound chip on it, please ??
I have Acer Aspire 7720 with 82801JI (ICH10 Family) HD Audio Controller, it worket well with VoodooHDA 0.2.1 under SL, but with Lion doesn't work ...

[chamak]

Hi guys, I've a Creative X-FI Titanium PCI-E. Deleted AppleHDA.kext and added VoodooHDA.kext 2.7.2 in /E/E. After kextcache and reboot I can now see a volume controller on the menu and I can as well see only the green output bar in the settings as well. but for some reason there's no sound output through my speaker. I switched to windows 7 and made sure all the connectivity is okay. Any help please? I've also disabled the on-board audio.

Thanks.

[tobiastimpe]

While we're talking about VoodooHDA, I tired it on my ASUS P5N-D with ALC883 and line-out works fine under Lion.

But as soon as I try to go to Audio-MIDI-Setup and set up my SPDIF optical output, I get a kernel panic!

Any help?

[homer72]

helmi1234, on Aug 4 2011, 10:20 AM, said:

Hi,

you can try this kext. It's voodooHDA 0.2.1 compiled for 64bit.

VoodooHDA.kext.zip

It works great for me in Lion for my XFi in 64bit.  However sometimes it gives me a KP on startup. Does anyone know how to prevent these occasional KPs or alternative drivers for XFi Titanium without crackling noises?


Thanks

thanks
lion x-fi titanium is work

[xiaomei]

Anyone knows how to make ALC665 to work in Lion without any issues? My Alienware M11x works really good apart from the sound. I have managed to install some old kext to have sound working, but now everytime I boot it says something about a delay of kernel cache by number of seconds, which also casues it wont boot evertime.

Edit. I've managed to get rid of that message by adding ForceWake=Y to apple.boot.plist, then I got another one "header read size 200 incorrect image signature" and managed get rid of that also, by executing in terminal: sudo pmset -a hibernatemode 0

then deleted the sleepimage with:
sudo rm /var/vm/sleepimage

So far no issues during boot and working sound.