1620 replies to this topic

[artur-pt]

hi fabio

Using PCI-Root-UID value: 0
Framebuffer @0xA0000000  MMIO @0xB4000000 I/O Port @0x00003000 ROM Addr @0xFFFE0000
ATI card POSTed, reading VBIOS from legacy space
(AtiConfig) Framebuffer set to: Langur
Nr of ports set to framebuffer's default: 3
ATI Cedar ATI Mobility Radeon HD 5400 Series 512MB (Langur) [1002:68e0] (subsys [1025:036d]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)

chameleon wizard

thanks

[ErmaC]

Done... :-)

post a new revision of my sub-Branch (only the Binaries r1913) --> i386.zip

@artur-pr include your device...

	{ 0x68E0, 0x036D1025, CHIP_FAMILY_CEDAR, "ATI Radeon HD 5470M", kLangur },

Tell me if the frame buffer is correct...

Enjoy

Fabio

[artur-pt]

hi, Fabio

all working in Lion and ML dp2, and the frame buffer to my note is correct.

Framebuffer @0xA0000000  MMIO @0xB4000000 I/O Port @0x00003000 ROM Addr @0xFFFE0000
ATI card POSTed, reading VBIOS from legacy space
Framebuffer set to device's default: Langur
Nr of ports set to framebuffer's default: 3
ATI Cedar ATI Radeon HD 5470M 512MB (Langur) [1002:68e0] (subsys [1025:036d]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)

 Captura de ecrã 2012-04-1, às 14.25.59.png   233.33K   94 downloads

thanks

[starobrno1]

Thanks Fabio 1908 works just great even with my two old crappy noname 7300 gs videocards.

For this install I just cloned the 10.6.8 from a late 2011 Imac and with 1908 my old GA EP45- DS3 q6600 cpu works better than ever.

Tanks again u rock man

[marcoslash91]

ciao fabio, io ho un hp dv6 con i5 460m. avrei due schede grafiche sul mio portatile, la integrata intel e la ati 5470 come artur-pt. si può fare qualcosa per farla funzionare?? grazie in anticipo

[ErmaC]

marcoslash91, on 02 April 2012 - 10:00 PM, said:

ciao fabio, io ho un hp dv6 con i5 460m. avrei due schede grafiche sul mio portatile, la integrata intel e la ati 5470 come artur-pt. si può fare qualcosa per farla funzionare?? grazie in anticipo

post your bdmesg...
but no idea at all...

Fabio

[marcoslash91]

.: ErmaC :., on 03 April 2012 - 12:19 AM, said:

post your bdmesg...
but no idea at all...

Fabio

a siamo nella sezione internazionale giustamente parliamo inglese! so this is my bdmesg about my ATI 5470M

ACPI table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
Framebuffer @0xA0000000  MMIO @0xC4400000 I/O Port @0x00004000 ROM Addr @0xFFFE0000
ATI card POSTed, reading VBIOS from legacy space
(AtiConfig) Framebuffer set to: Eulemur
Nr of ports set to framebuffer's default: 3
ATI Cedar ATI Radeon HD 5470M 4095MB (Eulemur) [1002:68e0] (subsys [103c:144a]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)
Intel Unknown [8086:0046] :: PciRoot(0x0)/Pci(0x2,0x0)

The last "intel unkonw" ecc ecc. is my integrated video card.
thanks
Marco

[ErmaC]

marcoslash91, on 03 April 2012 - 09:43 AM, said:

Marco

Install this and send the new bdmesg



Fabio

[marcoslash91]

thanks fabio, but the ati card is not detected   bdmesg says than i have an intel hd 3000, but is impossible! i have an i5 460m and it isn't a sandy bridge, however this is my complete report:

Last login: Tue Apr  3 15:52:55 on console
host745:~ marco$ bdmesg
Chameleon 2.1svn (svn-r1914) [2012-04-03 12:18:02]
msr(302): platform_info 20011300
msr(306): flex_ratio 00000000
Sticking with [BCLK: 133Mhz, Bus-Ratio: 190]
CPU: Brand String:			 Intel(R) Core(TM) i5 CPU	   M 460  @ 2.53GHz
CPU: Vendor/Family/ExtFamily:  0x756e6547/0x6/0x0
CPU: Model/ExtModel/Stepping:  0x25/0x2/0x5
CPU: MaxCoef/CurrCoef:		 0x0/0x13
CPU: MaxDiv/CurrDiv:		   0x0/0x0
CPU: TSCFreq:				  2527MHz
CPU: FSBFreq:				  133MHz
CPU: CPUFreq:				  2527MHz
CPU: NoCores/NoThreads:		2/4
CPU: Features:				 0x000002ff
Read HFS+ file: [hd(0,3)/System/Library/CoreServices/SystemVersion.plist] 479 bytes.
Read HFS+ file: [hd(0,3)/Extra/org.chameleon.Boot.plist] 791 bytes.
Invalid mach magic 0x2
Module 'Symbols.dylib' by 'Chameleon' Loaded.
Description: Chameleon symbols for linking
Version: 0
Compat:  0
Read HFS+ file: [hd(0,3)/Extra/modules/Keylayout.dylib] 13424 bytes.
Module 'Keylayout.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Read HFS+ file: [hd(0,3)/Extra/modules/klibc.dylib] 44252 bytes.
Module 'klibc.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Read HFS+ file: [hd(0,3)/Extra/modules/Resolution.dylib] 22428 bytes.
Module 'Resolution.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Buffer location: 0x1000F8CA status: 0
0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0x00 0x0D 0xAF 0x92 0x15 0x00 0x00 0x00 0x00
0xFF 0xFF 0xFF 0x00 0xAF 0x15 0x00 0x00 0x13 0x03 0x23 0x78 0x07 0x9A 0x4E 0x26
0xFF 0xFF 0x0D 0x15 0x00 0x13 0x80 0x78 0xF5 0x4E 0x1E 0x00 0x01 0x01 0x01 0x01
0xFF 0x00 0x15 0x00 0x03 0x78 0x9A 0x26 0x00 0x01 0x01 0x01 0x01 0x1B 0x00 0x22
0xFF 0xAF 0x00 0x03 0x0A 0x4E 0x54 0x01 0x01 0x01 0x12 0x00 0x26 0x00 0x00 0x35
0xFF 0x15 0x13 0x78 0x4E 0x00 0x01 0x01 0x01 0x00 0x00 0x18 0x4E 0x2D 0x20 0x43
0xFF 0x00 0x80 0x9A 0x54 0x01 0x01 0x1B 0x10 0x00 0x00 0x2D 0x00 0x4F 0x20 0xFE
0x00 0x00 0x78 0x26 0x01 0x01 0x1B 0x22 0x18 0x35 0x0A 0x43 0x20 0xFE 0x2D 0x20
getResolution: 1366x768x32
Read HFS+ file: [hd(0,3)/Extra/modules/uClibcxx.dylib] 77808 bytes.
Module 'uClibcxx.dylib' by 'Unknown' Loaded.
Description:
Version: 0
Compat:  0
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/theme.plist] 2688 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/background.png] 4204 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/logo.png] 21872 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_generic.png] 5375 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_hfsplus.png] 3645 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_ext3.png] 7094 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_fat16.png] 5375 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_fat32.png] 5375 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_ntfs.png] 4176 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_cdrom.png] 5627 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_selection.png] 10744 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_scroll_prev.png] 271 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/device_scroll_next.png] 268 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_boot.png] 1747 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_verbose.png] 4116 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_ignore_caches.png] 4051 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_single_user.png] 4114 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_memory_info.png] 1634 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_video_info.png] 1593 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_help.png] 1711 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_verbose_disabled.png] 4101 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_ignore_caches_disabled.png] 4037 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_single_user_disabled.png] 4100 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/menu_selection.png] 323 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/progress_bar.png] 372 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/progress_bar_background.png] 233 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/text_scroll_prev.png] 252 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/text_scroll_next.png] 255 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/font_console.png] 3499 bytes.
Read HFS+ file: [hd(0,3)/Extra/Themes/Default/font_small.png] 6244 bytes.
Read HFS+ file: [hd(0,3)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 232 bytes.
Read HFS+ file: [hd(0,3)/Extra/org.chameleon.Boot.plist] 791 bytes.
Loading Darwin 10.7
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,3)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Read HFS+ file: [hd(0,3)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 17111910 bytes.
ACPI table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
Framebuffer @0xA0000000  MMIO @0xC4400000 I/O Port @0x00004000 ROM Addr @0xFFFE0000
ATI card POSTed, reading VBIOS from legacy space
(AtiConfig) Framebuffer set to: Eulemur
Nr of ports set to framebuffer's default: 3
ATI Cedar ATI Radeon HD 5470M 4095MB (Eulemur) [1002:68e0] (subsys [103c:144a]):: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)
Intel Intel HD Graphics 3000 Mobile [8086:0046] :: PciRoot(0x0)/Pci(0x2,0x0)
LAN Controller [10ec:8168] :: PciRoot(0x0)/Pci(0x1c,0x1)/Pci(0x0,0x0)
Setting up lan keys
Read HFS+ file: [hd(0,3)/Extra/smbios.plist] 691 bytes.
SMBus CmdReg: 0x3
Scanning SMBus [8086:3b30], mmio: 0xc4506004, ioport: 0x5000, hostc: 0x1
SPD[0] (size): 146 @0x50
Slot: 0 Type 24 4096MB (DDR3 SDRAM) 1333MHz Vendor=Samsung
	  PartNo=M471B5273CH0-CH9 SerialNo=8440A9F4
SPD[0] (size): 255 @0x51
SPD[0] (size): 255 @0x52
SPD[0] (size): 255 @0x53
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel(R) Core(TM) i5 CPU	   M 460  @ 2.53GHz, family 0x6, model 0x25
Type: 0, Length: 24, Handle: 0x0
BIOSInformation:
vendor: Apple Inc.
version: MBP61.88Z.0057.B0C.1007261552
releaseDate: 07/26/10
Type: 1, Length: 27, Handle: 0x1
SystemInformation:
manufacturer: Apple Inc.
productName: MacBookPro6,1
version: 1.0
serialNumber: C02FP160DC79
uuid: 434E4630-3336-3832-4634-60EB6943E025
wakeupReason: 0x6
skuNumber: XR541EA#ABZ
family: MacBook Pro
Type: 2, Length: 16, Handle: 0x2
BaseBoard:
manufacturer: Apple Inc.
product: Mac-F22589C8
version: 65.27
serialNumber: P L61J 01 1Z ZE G4T
assetTagNumber: Base Board Asset Tag
locationInChassis: Base Board Chassis Location
boardType: 0xA
Type: 3, Length: 22, Handle: 0x3
SystemEnclosure:
manufacturer: Hewlett-Packard
type: 10
version: N/A
serialNumber: None
assetTagNumber:					
Type: 9, Length: 17, Handle: 0x4
Type: 9, Length: 17, Handle: 0x5
Type: 9, Length: 17, Handle: 0x6
Type: 10, Length: 6, Handle: 0x7
Type: 10, Length: 6, Handle: 0x8
Type: 11, Length: 5, Handle: 0x9
Type: 12, Length: 5, Handle: 0xa
Type: 15, Length: 29, Handle: 0xb
Type: 21, Length: 7, Handle: 0xc
Type: 22, Length: 26, Handle: 0xd
Type: 32, Length: 20, Handle: 0xe
Type: 41, Length: 11, Handle: 0xf
Type: 41, Length: 11, Handle: 0x10
Type: 41, Length: 11, Handle: 0x11
Type: 4, Length: 42, Handle: 0x13
ProcessorInformation:
socketDesignation: CPU
processorType: 3
processorFamily: 0xBF
manufacturer: Intel(R) Corporation
processorID: 0x20655
processorVersion: Intel(R) Core(TM) i5 CPU	   M 460  @ 2.53GHz
externalClock: 133MHz
maximumClock: 2527MHz
currentClock: 2533MHz
serialNumber: LION055???
assetTag: FFFF
partNumber: LION055???
Type: 7, Length: 19, Handle: 0x14
Type: 7, Length: 19, Handle: 0x15
Type: 7, Length: 19, Handle: 0x16
Type: 7, Length: 19, Handle: 0x17
Type: 16, Length: 15, Handle: 0x18
Type: 17, Length: 28, Handle: 0x19
MemoryDevice:
deviceLocator: Bottom - Slot 1
bankLocator: BANK 0
memoryType: DDR3
memorySpeed: 1333MHz
manufacturer: Samsung
serialNumber: 8440A9F4
assetTag: Unknown
partNumber: M471B5273CH0-CH9
Type: 18, Length: 23, Handle: 0x1a
Type: 20, Length: 19, Handle: 0x1b
Type: 17, Length: 28, Handle: 0x1c
MemoryDevice:
deviceLocator: Bottom - Slot 2
bankLocator: BANK 1
memoryType: DDR3
memorySpeed: 1067MHz
manufacturer: N/A
serialNumber: N/A
assetTag: Unknown
partNumber: N/A
Type: 18, Length: 23, Handle: 0x1d
Type: 18, Length: 23, Handle: 0x1e
Type: 19, Length: 15, Handle: 0x1f
Type: 131, Length: 6, Handle: 0x1f
AppleProcessorType:
ProcessorType: 0x601
Type: 132, Length: 6, Handle: 0x20
AppleProcessorBusSpeed:
ProcessorBusSpeed (QPI): 33.8GT/s
Type: 127, Length: 4, Handle: 0x21
Customizing SystemID with : 434e4630-3336-3832-4634-60eb6943e025
ACPI table not found: DSDT.aml
ACPI table not found: SSDT.aml
FADT: Restart Fix applied!
Found ACPI CPU: CPU0
Found ACPI CPU: CPU1
Found ACPI CPU: CPU2
Found ACPI CPU: CPU3
Found ACPI CPU: CPU4
Found ACPI CPU: CPU5
Found ACPI CPU: CPU6
Found ACPI CPU: CPU7
SSDT with CPU C-States generated successfully
P-States: min 0x9, max 0x14
SSDT with CPU P-States generated successfully
RSDT: Added 2 SSDT table(s)
FADT: Restart Fix applied!
Added 2 SSDT table(s) into XSDT
Starting Darwin x86_64
Boot Args: boot-uuid=1930A6AB-8B69-3DEF-BE43-EEA7B1E8B500 rd=*uuid npci=0x2000 darkwake=0 cpus=1
host745:~ marco$

maybe there is a wrong kernel flag in boot.chamelon or in smbios? i set my smbios in macbook pro 6,1. or is a problem of ati kext? uff thanks

EDIT: lion 10.7.3, i have atiinjector aticontroller5000,

[artur-pt]

hi

i think the problem is the intel hd (8086 : 0046 ) is not supported by the os x

i don't have it

only ati gpu

good hack

[marcoslash91]

uff

[Majonéz]

Hungarian translation by me.

Attached Files

•  hu.lproj.zip   20.24K   7 downloads

[ErmaC]

Andrew_90, on 09 April 2012 - 08:58 PM, said:

Hungarian translation by me.

THX I will commit it soon...
What nick you prefer(for the credits)? Andrew_90 or majonéz (As I see in the file)

Fabio

[Majonéz]

.: ErmaC :., on 09 April 2012 - 09:31 PM, said:

THX I will commit it soon...
What nick you prefer(for the credits)? Andrew_90 or majonéz (As I see in the file)

Fabio

majonéz.
I will change my profile name to it.
Thx

[ErmaC]

Andrew_90, on 09 April 2012 - 09:52 PM, said:

majonéz.
I will change my profile name to it.
Thx

Ok this first page as been update with your contribute.
I will commit the language soon.
before I need some translation, because some field are missed:
Description.html

Quote

- Load a ramdisk to directly boot retail DVDs without additional programs.
- Device Property Injection via device-properties string.
- Message logging.
The code is released under version 2 of the Gnu Public License.

..
Localizable.strings

Quote

This module provides a standard c library for modules to link to if the library provided by chameleon is insufficient.
This is currently only used by the uClibc++ library.
Source: http://www.kernel.or...nux/libs/klibc/

Ez a modul kiolvassa az 'EDID' információkat az elsődleges monitorból.
The module is currently not integrated into trunk and has minimal uses as it stands.
Additionally, the module will patch the vesa modes available in pre intel hd graphics cards to provide proper resolution while booting.

This module provides a minimalistic c++ runtime library for use in other modules. This does not provide functionality by itself, instead it is used to allow for the c++ language to be used in other modules.
*Please note that rtti and exceptions has both been disabled.
Source: http://cxx.uclibc.org/
Dependencies: klibc

...


Fabio

[Majonéz]

The missing fields translated, other ones rechecked.

Attached Files

•  hu.lproj.zip   19.57K   6 downloads

[ugokind]

hy fabio
is the last trunk good to boot ML?
I ask that because apart from 1820 the newer don't work with ML

ah.. the latest trunks (after 1658) have problems if I boot in a mcp79a chipset
reboot immediately

[ErmaC]

ugokind, on 15 April 2012 - 10:00 AM, said:

hy fabio
is the last trunk good to boot ML?
I ask that because apart from 1820 the newer don't work with ML

ah.. the latest trunks (after 1658) have problems if I boot in a mcp79a chipset
reboot immediately

The Official TRUNK still not have support for Mountain Lion.

I Update the first page with my sub-Branch, binaries and pkg r1924

Enjoy

Fabio

[ErmaC]

Add binaries for 1925.

Fabio

[nibbio67]

Hi all, I wish to update my Chameleon from 2.0 RC4 to the newest release. I have Ideneb 1.5.1 Leopard 10.5.7.
Can I update or could I have some problem?

tks